A Single Terminal [NiII-OH] Catalyst for Direct Julia-Type Olefination and α-Alkylation Involving Sulfones and Alcohols.

A terminal [NiII-OH] complex 1, supported by triflamide-functionalized NHC ligands, showed divergent reactivity for the reaction of sulfone with alcohol, contingent on base concentration, temperature, and time. Julia-type olefination of alcohols with sulfones was achieved using one equiv. of base, whereas lowering base loading to 0.5 equiv. afforded α-alkylated sulfones. Besides excellent substrate scope and selectivity, biologically active stilbene derivatives DMU-212, pinosylvin, resveratrol, and piceatannol were synthesized in high yield under Julia-type olefination conditions. An extensive array of controlled experiments and DFT calculations provide valuable insight on the reaction pathway.

Synchronous Proton-Hydride Transfer by a Pyrazole-Functionalized Protic Mn(I) Complex in Catalytic Alcohol Dehydrogenative Coupling.

A series of Mn(I) complexes Mn(L1 )(CO)3 Br, Mn(L2 )(CO)3 Br, Mn(L1 )(CO)3 (OAc) and Mn(L3 )(CO)3 Br [L1 =2-(5-tert-butyl-1H-pyrazol-3-yl)-1,8-naphthyridine, L2 =2-(5-tert-butyl-1H-pyrazol-3-yl)pyridine, L3 =2-(5-tert-butyl-1-methyl-1H-pyrazol-3-yl)-1,8-naphthyridine] were synthesized and fully characterized. The acid-base equilibrium between the pyrazole and the pyrazolato forms of Mn(L1 )(CO)3 Br was studied by 1 H NMR and UV-vis spectra. These complexes are screened as catalysts for acceptorless dehydrogenative coupling (ADC) of primary alcohols and aromatic diamines for the synthesis of benzimidazole and quinoline derivatives with the release of H2 and H2 O as byproducts. The protic complex Mn(L1 )(CO)3 Br shows the highest catalytic activity for the synthesis of 2-substituted benzimidazole derivatives with broad substrate scope, whereas a related complex [Mn(L3 )(CO)3 Br], which is devoid of the proton responsive ß-NH unit, shows significantly reduced catalytic efficiency validating the crucial role of the ß-NH functionality for the alcohol dehydrogenation reactions. Control experiments, kinetic and deuterated studies, and density functional theory (DFT) calculations reveal a synchronous hydride-proton transfer by the metal-ligand construct in the alcohol dehydrogenation step.

Hydroarylation of alkynes via dual ortho-C-H functionalization of diaryl amines on a dicopper(I,I) platform.

A pyridine and morpholine-functionalized dicopper(I,I)-NHC complex (1) features both terminal and bridging coordination modes of NHC within the same molecule, and catalyzes dual ortho-C-H functionalization of diaryl amines for the hydroarylation of alkynes. A bimetallic construct in catalyst 1 allows sequential activation of ortho-C-H bonds of two aryl units to furnish a wide variety of 9,10-dihydroacridine derivatives without the explicit use of a directing group.

Antimicrobial efficacy of a hemilabile Pt(II)-NHC compound against drug-resistant S. aureus and Enterococcus.

Three platinum(II)-N-heterocyclic carbene (NHC) compounds [Pt(L1)Cl](PF6) (1), [Pt(L2)(COD)](PF6)2 (2) and [Pt(L2)Cl2] (3) were synthesized bearing pyridyl-functionalized butenyl-tethered (L1H) and n-butyl tethered (L2H) NHC ligands, and their antibacterial activity against clinically relevant human pathogens was evaluated. Complex 1 was designed to have one of its metal coordination sites masked with a hemilabile butenyl group. The antibacterial activity spectrum against the ESKAPE panel of pathogens shows superior activity of 1 compared to 2 and 3 against the Gram-positive S. aureus pathogen. Complex 1 showed equipotent activity against clinical drug-resistant S. aureus and Enterococcus isolates. Furthermore, 1 demonstrated concentration-dependent bactericidal activity with a long post-antibiotic effect, eradicated preformed S. aureus biofilm and synergized with gentamicin and minocycline for combinatorial antimicrobial therapy. Under in vivo conditions, 1 displayed potent activity in reducing bacterial load in a murine thigh infection model, similar to vancomycin, albeit at 2.5× less dosage. An array of experiments reveals key characteristics for the hemilabile complex 1 as a potential anti-staphylococcal drug.

Simultaneous Harvesting of Multiple Hot Holes via Visible-Light Excitation of Plasmonic Gold Nanospheres for Selective Oxidative Bond Scission of Olefins to Carbonyls.

Using visible photoexcitation of gold nanospheres we successfully demonstrate the simultaneous harvesting of plasmon-induced multiple hot holes in the complete oxidative scission of the C=C bond in styrene at room temperature to selectively form benzaldehyde and formaldehyde, which is a reaction that requires activation of multiple substrates. Our results reveal that, while extraction of hot holes becomes efficient for interband excitation, harvesting of multiple hot holes from the excited Au nanospheres becomes prevalent only beyond a threshold light intensity. We show that the alkene oxidation proceeded via a sequence of two consecutive elementary steps; namely, a binding step and a cyclic oxometallate transition state as the rate-determining step. This demonstration of plasmon-excitation-mediated harvesting of multiple hot holes without the use of an extra hole transport media opens exciting possibilities, notably for difficult catalytic transformations involving multielectron oxidation processes.

Recent Advances in Carbon Dioxide Adsorption, Activation and Hydrogenation to Methanol using Transition Metal Carbides.

The inevitable emission of carbon dioxide (CO2 ) due to the burning of a substantial amount of fossil fuels has led to serious energy and environmental challenges. Metal-based catalytic CO2 transformations into commodity chemicals are a favorable approach in the CO2 mitigation strategy. Among these transformations, selective hydrogenation of CO2 to methanol is the most promising process that not only fulfils the energy demands but also re-balances the carbon cycle. The investigation of CO2 adsorption on the surface of heterogeneous catalyst is highly important because the formation of various intermediates which determines the selectivity of product. Transition metal carbides (TMCs) have received considerable attention in recent years because of their noble metal-like reactivity, ceramic-like properties, high chemical and thermal stability. These features make them excellent catalytic materials for a variety of transformations such as CO2 adsorption and its conversion into value-added chemicals. Herein, the catalytic properties of TMCs are summarize along with synthetic methods, CO2 binding modes, mechanistic studies, effects of dopant on CO2 adsorption, and carbon/metal ratio in the CO2 hydrogenation reaction to methanol using computational as well as experimental studies. Additionally, this Review provides an outline of the challenges and opportunities for the development of potential TMCs in CO2 hydrogenation reactions.

Hydrosilylative reduction of primary amides to primary amines catalyzed by a terminal [Ni-OH] complex.

A terminal [Ni-OH] complex 1, supported by triflamide-functionalized NHC ligands, catalyzes the hydrosilylative reduction of a range of primary amides into primary amines in good to excellent yields under base-free conditions with key functional group tolerance. Catalyst 1 is also effective for the reduction of a variety of tertiary and secondary amides. In contrast to literature reports, the reactivity of 1 towards amide reduction follows an inverse trend, i.e., 1° amide > 3° amide > 2° amide. The reaction does not follow a usual dehydration pathway.

A Proton-Responsive Pyridyl(benzamide)-Functionalized NHC Ligand on Ir Complex for Alkylation of Ketones and Secondary Alcohols.

A Cp*Ir(III) complex (1) of a newly designed ligand L1 featuring a proton-responsive pyridyl(benzamide) appended on N-heterocyclic carbene (NHC) has been synthesized. The molecular structure of 1 reveals a dearomatized form of the ligand. The protonation of 1 with HBF4 in tetrahydrofuran gives the corresponding aromatized complex [Cp*Ir(L1 H)Cl]BF4 (2). Both compounds are characterized spectroscopically and by X-ray crystallography. The protonation of 1 with acid is examined by 1 H NMR and UV-vis spectra. The proton-responsive character of 1 is exploited for catalyzing α-alkylation of ketones and ß-alkylation of secondary alcohols using primary alcohols as alkylating agents through hydrogen-borrowing methodology. Compound 1 is an effective catalyst for these reactions and exhibits a superior activity in comparison to a structurally similar iridium complex [Cp*Ir(L2 )Cl]PF6 (3) lacking a proton-responsive pendant amide moiety. The catalytic alkylation is characterized by a wide substrate scope, low catalyst and base loadings, and a short reaction time. The catalytic efficacy of 1 is also demonstrated for the syntheses of quinoline and lactone derivatives via acceptorless dehydrogenation, and selective alkylation of two steroids, pregnenolone and testosterone. Detailed mechanistic investigations and DFT calculations substantiate the role of the proton-responsive ligand in the hydrogen-borrowing process.

Solvent- and Temperature-Dependent Assembly in Monolayer Films of a Ferrocene-Naphthyridine Hybrid on HOPG.

The formation of a monolayer film of bis-naphthyridyl ferrocene on highly oriented pyrolytic graphite (HOPG) at ambient conditions is demonstrated. The films are prepared by drop casting from different solvents. The microscopic structure of the films is understood using atomic force microscopy (AFM) and scanning tunnelling microscopy (STM). The analysis reveals two different types of Phases (I and II) in the films and the relative percentage of these phases depends on the nature of the solvents used for the preparation and the thermodynamical condition. Solvents like methanol, acetonitrile and DMF exclusively select Phase-I, whereas acetone and ethanol show a mix of both phases at room temperature. The different phases are formed by different conformers of the molecule. We also show that the selectivity of one of the phases over the other is related to the difference in the energetics for the formation of these phases.

The Pivotal Role of Hot Carriers in Plasmonic Catalysis of C-N Bond Forming Reaction of Amines.

Here, we demonstrate the simultaneous utilization of both the hot carriers (electrons and holes) in the photocatalytic transformation of benzylamine to N-benzylidenebenzylamine and the scope of reaction has also been successfully demonstrated with catalytic oxidation of 4-methoxybenzylamine. The wavelength-dependent excitation of AuNP allows us to tune the potential energy of charge carriers relative to the redox potential of the reactants which leads to energetically favorable product formation on the nanoparticle surface. We capture the formation of reaction intermediates and products by using in situ Raman spectroscopy, complemented by NMR spectroscopy and GC-MS. Based on the experimental substantiations, a plausible reaction mechanism has been proposed.

Palladium complexes with an annellated mesoionic carbene (MIC) ligand: catalytic sequential Sonogashira coupling/cyclization reaction for one-pot synthesis of benzofuran, indole, isocoumarin and isoquinolone derivatives.

Two Pd(ii) complexes (1 and 2) featuring a fused π-conjugated imidazo[1,2-a][1,8]naphthyridine-based mesoionic carbene ligand have been synthesized and structurally characterized. Both complexes effectively catalyze the one-pot synthesis of benzofuran starting from phenylacetylene and 2-iodophenol under mild conditions. Complex 1 is found to be an excellent catalyst for the straightforward access to a library of benzofuran, indole, isocoumarin and isoquinolone derivatives by the reaction of terminal alkynes with 2-iodo derivates of phenol, N-methyl aniline, benzoic acid and N-methyl benzamide, respectively. The general utility of the catalytic method is demonstrated using a variety of diversely substituted terminal alkynes and the corresponding desired products are obtained in good to excellent yields. On the basis of control experiments, a two-cycle mechanism is proposed which involves the Sonogashira coupling of 2-iodo derivatives with alkynes and the subsequent cyclization of the corresponding 2-alkynyl compounds.

A bromo-capped diruthenium(i,i) N-heterocyclic carbene compound for in situ bromine generation with NBS: catalytic olefin aziridination reactions.

A bromo-capped metal-metal bonded diruthenium(i,i) complex Ru2(CO)4(PIN)2Br2 (1) (PIN = 1-isopropyl-3-(5,7-dimethyl-1,8-naphthyrid-2-yl)imidazol-2-ylidene) generates bromine with N-bromosuccinimide (NBS) at room temperature. Cycloalkene and stilbene are readily brominated by stoichiometric reactions with 1 and NBS. An analysis of the dibrominated products suggests the formation of cyclic bromonium intermediates indicating in situ Br2 generation. Complex 2, an iodide analogue of 1, is also synthesized. The reaction of 2 with N-iodosuccinimide releases I2, which is confirmed by the starch-iodine test. The catalytic utility of 1 is examined for the bromination of phenol. Catalyst 1, in combination with NBS and base, exhibits regioselectivity towards monobrominated products. Furthermore, efficient olefin aziridination is demonstrated utilizing catalyst 1 in the presence of NBS, K2CO3 and TsNH2.

Double Dehydrogenation of Primary Amines to Nitriles by a Ruthenium Complex Featuring Pyrazole Functionality.

A ruthenium(II) complex bearing a naphthyridine-functionalized pyrazole ligand catalyzes oxidant-free and acceptorless selective double dehydrogenation of primary amines to nitriles at moderate temperature. The role of the proton-responsive entity on the ligand scaffold is demonstrated by control experiments, including the use of a N-methylated pyrazole analogue. DFT calculations reveal intricate hydride and proton transfers to achieve the overall elimination of 2 equiv of H2.

Hemilability-Driven Water Activation: A NiII Catalyst for Base-Free Hydration of Nitriles to Amides.

The NiII complex 1 containing pyridyl- and hydroxy-functionalized N-heterocyclic carbenes (NHCs) is synthesized and its catalytic utility for the selective nitrile hydration to the corresponding amide under base-free conditions is evaluated. The title compound exploits a hemilabile pyridyl unit to interact with a catalytically relevant water molecule through hydrogen-bonding and promotes a nucleophilic water attack to the nitrile. A wide variety of nitriles is hydrated to the corresponding amides including the pharmaceutical drugs rufinamide, Rifater, and piracetam. Synthetically challenging α-hydroxyamides are accessed from cyanohydrins under neutral conditions. Related catalysts that lack the pyridyl unit (i.e., compounds 2 and 4) are not active whereas those containing both the pyridyl and the hydroxy or only the pyridyl pendant (i.e., compounds 1 and 3) show substantial activity. The linkage isomer 1' where the hydroxy group is bound to the metal instead of the pyridyl group was isolated under different crystallization conditions insinuating a ligand hemilabile behavior. Additional pKa measurements reveal an accessible pyridyl unit under the catalytic conditions. Kinetic studies support a ligand-promoted nucleophilic water addition to a metal-bound nitrile group. This work reports a Ni-based catalyst that exhibits functional hemilability for hydration chemistry.

Inter-ligand electronic coupling mediated through a dimetal bridge: dependence on metal ions and ancillary ligands.

A series of Mo2, Ru2, Rh2 and Cu2 complexes with redox-active NP-R [2-(2-R)-1,8-naphthyridine; R = pyrazinyl (NP-pz, L1) and thiazolyl (NP-tz, L2)] ligands have been synthesized and characterized by X-ray crystallography and spectroscopic methods. Two NP-R ligands wrap the dimetal core by occupying four equatorial positions and two axial sites. The remaining four equatorial sites are engaged by bridging acetates in quadruply bonded cis-[Mo2(L1)2(OAc)2][BF4]2 (1), cis-[Mo2(L2)2(OAc)2][BF4]2 (1A), doubly bonded cis-[Ru2(L1)2(OAc)2][ClO4]2 (3), cis-[Ru2(L2)2(OAc)2][ClO4]2 (3A) and singly bonded trans-[Rh2(L1)2(OAc)2][BF4]2 (5) and trans-[Rh2(L2)2(OAc)2][BF4]2 (5A). Compounds cis-[Mo2(L1)2(CH3CN)4][BF4]4 (2), cis-[Mo2(L2)2(CH3CN)4][BF4]4 (2A), cis-[Ru2(L1)2(CO)4][OTf]2 (4) and cis-[Ru2(L2)2(CO)4][ClO4]2 (4A) contain acetonitriles or carbonyls as the ancillary ligands. The dicopper complexes trans-[Cu2(CH3CN)(L1)2][ClO4]2 (6) and trans-[Cu2(L2)2(ClO4)2] (6A) involve no bonding interaction between two Cu(i) units. Cyclic voltammogram studies reveal that two one-electron processes corresponding to each of the two ligands bound to the metal-metal bonded dimetal core result in four reversible one-electron reductions, with the exception of dirhodium(ii,ii) compounds 5 and 5A which show two one-electron reductions. The highest comproportionation constant (Kc) values are obtained for inter-valence complexes originating from the diruthenium(ii,ii) compounds 3 and 3A, whereas no electron delocalization is observed for dicopper(i,i) complexes 6 and 6A. The dimetal bridge and the ancillary ligands tune the degree of inter-ligand electronic coupling in these complexes. DFT calculations reveal a π*(NP)-δ*(M2)-π*(NP) orbital conduit for electron delocalization. For diruthenium(ii,ii) compounds 3 and 3A, an additional π*(NP)-π*(M2)-π*(NP) pathway is accessible contributing to high Kc values. The ancillary π-ligands (acetates and carbonyls) reduce the extent of the electron flow through π*(NP)-δ*(M2)-π*(NP) and thus lower the Kc values. The absence of metal-metal bond orbitals and the reduced metal-ligand covalency in dicopper(i,i) compounds are responsible for the lack of electron delocalization in these systems.

Olefin oxygenation by water on an iridium center.

Oxygenation of 1,5-cyclooctadiene (COD) is achieved on an iridium center using water as a reagent. A hydrogen-bonding interaction with an unbound nitrogen atom of the naphthyridine-based ligand architecture promotes nucleophilic attack of water to the metal-bound COD. Irida-oxetane and oxo-irida-allyl compounds are isolated, products which are normally accessed from reactions with H2O2 or O2. DFT studies support a ligand-assisted water activation mechanism.

Amide-functionalized naphthyridines on a Rh(II) -Rh(II) platform: effect of steric crowding, hemilability, and hydrogen-bonding interactions on the structural diversity and catalytic activity of dirhodium(II) complexes.

Ferrocene-amide-functionalized 1,8-naphthyridine (NP) based ligands {[(5,7-dimethyl-1,8-naphthyridin-2-yl)amino]carbonyl}ferrocene (L(1) H) and {[(3-phenyl-1,8-naphthyridin-2-yl)amino]carbonyl}ferrocene (L(2) H) have been synthesized. Room-temperature treatment of both the ligands with Rh2 (CH3 COO)4 produced [Rh2 (CH3 COO)3 (L(1) )] (1) and [Rh2 (CH3 COO)3 (L(2) )] (2) as neutral complexes in which the ligands were deprotonated and bound in a tridentate fashion. The steric effect of the ortho-methyl group in L(1) H and the inertness of the bridging carboxylate groups prevented the incorporation of the second ligand on the {Rh(II) -Rh(II) } unit. The use of the more labile Rh2 (CF3 COO)4 salt with L(1) H produced a cis bis-adduct [Rh2 (CF3 COO)4 (L(1) H)(2) ] (3), whereas L(2) H resulted in a trans bis-adduct [Rh2 (CF3 COO)3 (L(2) )(L(2) H)] (4). Ligand L(1) H exhibits chelate binding in 3 and L(2) H forms a bridge-chelate mode in 4. Hydrogen-bonding interactions between the amide hydrogen and carboxylate oxygen atoms play an important role in the formation of these complexes. In the absence of this hydrogen-bonding interaction, both ligands bind axially as evident from the X-ray structure of [Rh2 (CH3 COO)2 (CH3 CN)4 (L(2) H)2 ](BF4 )2 (6). However, the axial ligands reorganize at reflux into a bridge-chelate coordination mode and produce [Rh2 (CH3 COO)2 (CH3 CN)2 (L(1) H)](BF4 )2 (5) and [Rh2 (CH3 COO)2 (L(2) H)2 ](BF4 )2 (7). Judicious selection of the dirhodium(II) precursors, choice of ligand, and adaptation of the correct reaction conditions affords 7, which features hemilabile amide side arms that occupy sites trans to the Rh-Rh bond. Consequently, this compound exhibits higher catalytic activity for carbene insertion to the CH bond of substituted indoles by using appropriate diazo compounds, whereas other compounds are far less reactive. Thus, this work demonstrates the utility of steric crowding, hemilability, and hydrogen-bonding functionalities to govern the structure and catalytic efficacyof dirhodium(II,II) compounds.

A highly efficient catalyst for selective oxidative scission of olefins to aldehydes: abnormal-NHC-Ru(II) complex in oxidation chemistry.

The utility and selectivity of the catalyst [Ru(COD)(L(1))Br2] (1) bearing a fused π-conjugated imidazo[1,2-a][1,8]naphthyridine-based abnormal N-heterocyclic carbene ligand L(1) is demonstrated toward selective oxidation of C═C bonds to aldehydes and C≡C bonds to α-diketones in an EtOAc/CH3CN/H2O solvent mixture at room temperature using a wide range of substrates, including highly functionalized sugar- and amino acid-derived compounds.

Metal-ligand cooperation on a diruthenium platform: selective imine formation through acceptorless dehydrogenative coupling of alcohols with amines.

Metal-metal singly-bonded diruthenium complexes, bridged by naphthyridine-functionalized N-heterocyclic carbene (NHC) ligands featuring a hydroxy appendage on the naphthyridine unit, are obtained in a single-pot reaction of [Ru2(CH3COO)2(CO)4] with 1-benzyl-3-(5,7-dimethyl-1,8-naphthyrid-2-yl)imidazolium bromide (BIN⋅HBr) or 1-isopropyl-3-(5,7-dimethyl-1,8-naphthyrid-2-yl)imidazolium bromide (PIN⋅HBr), TlBF4, and substituted benzaldehyde containing an electron-withdrawing group. The modified NHC-naphthyridine-hydroxy ligand spans the diruthenium unit in which the NHC carbon and hydroxy oxygen occupy the axial sites. All the synthesized compounds catalyze acceptorless dehydrogenation of alcohols to the corresponding aldehydes in the presence of a catalytic amount of weak base 1,4-diazabicyclo[2.2.2]octane (DABCO). Further, acceptorless dehydrogenative coupling (ADHC) of the alcohol with amines affords the corresponding imine as the sole product. The substrate scope is examined with 1 (BIN, p-nitrobenzaldehyde). A similar complex [Ru2(CO)4(CH3COO)(3-PhBIN)][Br], that is devoid of a hydroxy arm, is significantly less effective for the same reaction. Neutral complex 1 a, obtained by deprotonation of the hydroxy arm in 1, is found to be active for the ADHC of alcohols and amines under base-free conditions. A combination of control experiments, deuterium labeling, kinetic Hammett studies, and DFT calculations support metal-hydroxyl/hydroxide and metal-metal cooperation for alcohol activation and dehydrogenation. The bridging acetate plays a crucial role in allowing ß-hydride elimination to occur. The ligand architecture on the diruthenium core causes rapid aldehyde extrusion from the metal coordination sphere, which is responsible for exclusive imine formation.