Multiple retinal isomerizations during the early phase of the bestrhodopsin photoreaction.

Bestrhodopsins constitute a class of light-regulated pentameric ion channels that consist of one or two rhodopsins in tandem fused with bestrophin ion channel domains. Here, we report on the isomerization dynamics in the rhodopsin tandem domains of Phaeocystis antarctica bestrhodopsin, which binds all-trans retinal Schiff-base (RSB) absorbing at 661 nm and, upon illumination, converts to the meta-stable P540 state with an unusual 11-cis RSB. The primary photoproduct P682 corresponds to a mixture of highly distorted 11-cis and 13-cis RSB directly formed from the excited state in 1.4 ps. P673 evolves from P682 in 500 ps and contains highly distorted 13-cis RSB, indicating that the 11-cis fraction in P682 converts to 13-cis. Next, P673 establishes an equilibrium with P595 in 1.2 µs, during which RSB converts to 11-cis and then further proceeds to P560 in 48 µs and P540 in 1.0 ms while remaining 11-cis. Hence, extensive isomeric switching occurs on the early ground state potential energy surface (PES) on the hundreds of ps to µs timescale before finally settling on a metastable 11-cis photoproduct. We propose that P682 and P673 are trapped high up on the ground-state PES after passing through either of two closely located conical intersections that result in 11-cis and 13-cis RSB. Co-rotation of C11=C12 and C13=C14 bonds results in a constricted conformational landscape that allows thermal switching between 11-cis and 13-cis species of highly strained RSB chromophores. Protein relaxation may release RSB strain, allowing it to evolve to a stable 11-cis isomeric configuration in microseconds.

Experimental Assessment of the Electronic and Geometrical Structure of a Near-Infrared Absorbing and Highly Fluorescent Microbial Rhodopsin.

The recently discovered Neorhodopsin (NeoR) exhibits absorption and emission maxima in the near-infrared spectral region, which together with the high fluorescence quantum yield makes it an attractive retinal protein for optogenetic applications. The unique optical properties can be rationalized by a theoretical model that predicts a high charge transfer character in the electronic ground state (S0) which is otherwise typical of the excited state S1 in canonical retinal proteins. The present study sets out to assess the electronic structure of the NeoR chromophore by resonance Raman (RR) spectroscopy since frequencies and relative intensities of RR bands are controlled by the ground and excited state's properties. The RR spectra of NeoR differ dramatically from those of canonical rhodopsins but can be reliably reproduced by the calculations carried out within two different structural models. The remarkable agreement between the experimental and calculated spectra confirms the consistency and robustness of the theoretical approach.

Statistical Analysis of Photoluminescence Decay Kinetics in Quantum Dot Ensembles: Effects of Inorganic Shell Composition and Environment.

Discerning the kinetics of photoluminescence (PL) decay of packed quantum dots (QDs) and QD-based hybrid materials is of crucial importance for achieving their promising potential. However, the interpretation of the decay kinetics of QD-based systems, which usually are not single-exponential, remains challenging. Here, we present a method for analyzing photoluminescence (PL) decay curves of fluorophores by studying their statistical moments. A certain combination of such moments, named as the n-th order moments' ratio, R n , is studied for several theoretical decay curves and experimental PL kinetics of CdSe quantum dots (QDs) acquired by time-correlated single photon counting (TCSPC). For the latter, three different case studies using the R n ratio analysis are presented, namely, (i) the effect of the inorganic shell composition and thickness of the core-shell QDs, (ii) QD systems with Förster resonance energy transfer (FRET) decay channels, and (iii) system of QDs near a layer of plasmonic nanoparticles. The proposed method is shown to be efficient for the detection of slight changes in the PL kinetics, being time-efficient and requiring low computing power for performing the analysis. It can also be a powerful tool to identify the most appropriate physically meaningful theoretical decay function, which best describes the systems under study.

Content and Quality of Information about Stroke in Wikipedia across Multiple Languages.

BACKGROUND: Given the high contribution of stroke to the global burden of disease, there is a need for good-quality information on Web platforms such as Wikipedia. AIMS: This study aimed to describe the quality of the Wikipedia articles on stroke written in different languages. METHODS: We studied the world's 30 most spoken languages. With the DISCERN score, we evaluated the quality of the information within the Wikipedia articles. Three investigators assessed each of the texts translated to English. We also registered the word count, the number of references, and if the text referred to the emergency status of stroke, cues to suspect a stroke, and allusions to endovascular treatment. RESULTS: There is a Wikipedia article for stroke in 23 out of the 30 languages. The mean DISCERN score was 35 29.9 ± 9.2. Overall quality ranged from 3/5 in 26.1% to 1/5 in 17.4%. Word count had a mean of 36 3,145.8 ± 3,048.9 words, and the texts included a mean of 43.1 ± 57.3 references; 69.6% of the articles referred to stroke as a medical emergency, 52.2% included awareness symptoms, and 34.8% included endovascular management among the stroke treatments. Three pages included steroids as part of the stroke treatment. The DISCERN score was not correlated with the number of speakers, but it was positively correlated with the number of references (r = 0.90, p < 0.001) and the number of words (r = 0.78, p < 0.001) in the articles. CONCLUSION: The analyzed Wikipedia articles do not contain relevant and up-to-date information to the general population. Further, the content varies widely across the different languages and is missing for some of them. The missing versions disproportionally affect millions of potential information seekers in undeveloped countries.

Matrix metalloproteinase-2 and matrix metalloproteinase-9 serum levels in patients with vertebrobasilar dolichoectasia with and without stroke: case-control study.

PURPOSE: To describe the differences in the serum levels of MMP-2 and MMP-9 of patients with vertebrobasilar dolichoectasia (VBD) with and without acute stroke. METHODS: Case-control study. From an outpatient clinic, we recruited 14 controls and 19 patients with VBD. We also recruited 33 patients with stroke from two emergency departments, 14 without VBD (S/-VBD) and 19 with VBD (S/ + VBD). All the patients underwent serum MMP-2 and MMP-9 measurements and a non-contrast CT scan. Two investigators assessed the intracranial vertebral arteries (VA) and the basilar artery (BA) at the mid-pons. Diagnosis of VBD was made if the BA diameter was ≥ 4.5 mm. RESULTS: The mean age of the 66 patients studied was 57.6 + 16.0 years, 41% female. In the 33 patients with stroke, the median NIHSS was 8 (range 15); there were no differences in the NIHSS scores between both groups with stroke. Median MMP-2 levels were lower in the S/-VBD when compared to controls. Median MMP-9 serum levels were higher in both groups with VBD when compared to controls and the S/-VDB group. Both groups with stroke exhibited higher MMP-9 serum levels than controls but were not statistically different from those found in patients with VBD. Serum levels of MMP-9 were significantly correlated with the diameters of the BA (r = 0.344, p = 0.01) and the left VA (r = 0.305, p = 0.05). CONCLUSION: This study found that high serum levels of MMP-9 are associated with VBD independently of stroke and correlated with the degree of VBD.

Endovascular Treatment of Ischemic Stroke in a Developing Country.

BACKGROUND: There is inequality in access to recent advancements in endovascular treatment of acute ischemic stroke (AIS), and Mexico is unusually sensitive to such inequality. AIMS: To report the initial experience of the Mexican Endovascular Reperfusion Registry (MERR). METHODS: The MERR is an academic, independent, prospective, multicenter, observational registry of patients treated with endovascular reperfusion techniques in Mexican hospitals. The registry includes information on demographic and clinical characteristics, diagnostic procedures, treatments, selected time metrics, and outcomes. RESULTS: In all, 49 (57.1% female) patients from 8 centers were included and had the following characteristics: median National Institute of Health Stroke Scale score, 16; median Alberta Stroke Program Early CT Score score, 9; received intravenous tissue-type plasminogen activator, 49%; and treated with mechanical devices, 39 (79.6%), including 20 treated with stent retriever alone, 2 with retriever and intra-arterial thrombolysis (IAt), 10 with catheter aspiration (4 in combination with IAt), 6 with a combination of catheter aspiration and stent retriever, and 1 with IAt followed by balloon angioplasty. Recanalization (TICI 2b or better) was achieved in 69.4% of the patients. The median clot to recanalization time was 30 minutes. A modified Rankin scale ≤2 was achieved in 44.9% of the patients, and 68.2% of these were treated with stent retriever (P = .011). Procedure-related morbidity was 12.2%, 7 patients presented intracerebral hemorrhage (71.4% asymptomatic), and all-cause mortality was 6.1%. CONCLUSIONS: Endovascular treatment of AIS in Mexico is feasible and has an efficacy comparable to that of other countries. Still, many challenges remain, especially pertaining to high costs and difficulties in equality in access to treatment.

Anisotropic PCL nanofibers embedded with nonlinear nanocrystals as strong generators of polarized second harmonic light and piezoelectric currents.

Using the electrospinning technique nanofibers consisting of organic nonlinear optical 3-nitroaniline (3NA, C6H6N2O2) nanocrystals embedded in poly-ε-caprolactone (PCL) polymer, 3NA@PCL nanofibers, were produced. Polarimetry optical second harmonic generation and X-ray diffraction studies show that 3NA push-pull molecules crystallize inside the polymer fibers with a strong preferential orientation giving rise to an alignment of the molecular dipole moments along the nanofibers longitudinal axis. This alignment strongly enhances the second order nonlinear optical response of the fibers. Intense second harmonic generation emission was observed from a single nanofiber, corresponding to an effective second order susceptibility of 80 pm V-1, four times greater than the largest second order susceptibility tensor element (21 pm V-1) associated with a macroscopic 3NA crystal. Moreover, when subjected to a modest periodically applied force of 3 N, a piezoelectric current of 70 nA generated by a 4 cm2 electrospun nanofiber mat amounted to 122 nW cm-2 of instantaneous density power, sufficient to power a LCD display. The results show that the electrospinning technique is a powerful technique to fabricate organic functional materials with oriented nanocrystals made of highly polarizable molecules, embedded in a polymer matrix.

Ytterbium Oxide as Radiopacifier of Calcium Silicate-Based Cements. Physicochemical and Biological Properties.

This study evaluated physicochemical properties, cytotoxicity and bioactivity of MTA Angelus (MTA), calcium silicate-based cement (CSC) and CSC with 30% Ytterbium oxide (CSC/Yb2O3). Setting time was evaluated using Gilmore needles. Compressive strength was evaluated in a mechanical machine. Radiopacity was evaluated using radiographs of materials and an aluminum scale. Solubility was evaluated after immersion in water. Cell viability was evaluated by means of MTT assay and neutral red staining, and the mineralization activity by using alkaline phosphatase activity and Alizarin Red staining. The data were submitted to ANOVA, Tukey and Bonferroni tests (5% significance). The bioactive potential was evaluated by scanning electron microscopy. The materials presented similar setting time. MTA showed the lowest compressive strength. MTA and CSC/Yb2O3 presented similar radiopacity. CSC/Yb2O3 showed low solubility. Saos-2 cell viability tests showed no cytotoxic effect, except to 1:1 dilution in NR assay which had lower cell viability when compared to the control. ALP at 1 and 7 days was similar to the control. MTA and CSC had greater ALP activity at 3 days when compared to control. All the materials present higher mineralized nodules when compared with the control. SEM analysis showed structures suggesting the presence of calcium phosphate on the surface of materials demonstrating bioactivity. Ytterbium oxide proved to be a properly radiopacifying agent for calcium silicate-based cement since it did not affected the physicochemical and biological properties besides preserving the bioactive potential of this material.

Ytterbium oxide as radiopacifier of calcium silicate-based cements. physicochemical and biological properties

Abstract This study evaluated physicochemical properties, cytotoxicity and bioactivity of MTA Angelus (MTA), calcium silicate-based cement (CSC) and CSC with 30% Ytterbium oxide (CSC/Yb2O3). Setting time was evaluated using Gilmore needles. Compressive strength was evaluated in a mechanical machine. Radiopacity was evaluated using radiographs of materials and an aluminum scale. Solubility was evaluated after immersion in water. Cell viability was evaluated by means of MTT assay and neutral red staining, and the mineralization activity by using alkaline phosphatase activity and Alizarin Red staining. The data were submitted to ANOVA, Tukey and Bonferroni tests (5% significance). The bioactive potential was evaluated by scanning electron microscopy. The materials presented similar setting time. MTA showed the lowest compressive strength. MTA and CSC/Yb2O3 presented similar radiopacity. CSC/Yb2O3 showed low solubility. Saos-2 cell viability tests showed no cytotoxic effect, except to 1:1 dilution in NR assay which had lower cell viability when compared to the control. ALP at 1 and 7 days was similar to the control. MTA and CSC had greater ALP activity at 3 days when compared to control. All the materials present higher mineralized nodules when compared with the control. SEM analysis showed structures suggesting the presence of calcium phosphate on the surface of materials demonstrating bioactivity. Ytterbium oxide proved to be a properly radiopacifying agent for calcium silicate-based cement since it did not affected the physicochemical and biological properties besides preserving the bioactive potential of this material.

Resumo Este estudo avaliou as propriedades físico-químicas, citotoxicidade e bioatividade do MTA Angelus (MTA), cimento à base de silicato de cálcio (CSC) e CSC com 30% de óxido de itérbio (CSC/Yb2O3). O tempo de presa foi avaliado usando agulhas Gilmore. A resistência à compressão foi avaliada em uma máquina mecânica. A radiopacidade foi avaliada utilizando radiografias dos materiais e uma escala de alumínio. A solubilidade foi avaliada após imersão em água. A viabilidade celular foi avaliada por meio do ensaio MTT e coloração de vermelho neutro (NR), e a atividade de mineralização por meio da atividade da fosfatase alcalina e a coloração com Vermelho de Alizarina. Os dados foram submetidos aos testes ANOVA, Tukey e Bonferroni (5% de significância). O potencial bioativo foi avaliado por microscopia eletrônica de varredura. Os materiais apresentaram tempo de presa semelhante. O MTA mostrou menor resistência à compressão. MTA e CSC/Yb2O3 apresentaram radiopacidade semelhante. CSC/Yb2O3 apresentou menores valores de solubilidade. A viabilidade celular realizada pelos ensaios de MTT e NR não revelaram efeitos ctotóxicos em todas as diluições, exceto na diluição 1:1 no NR, o qual mostrou baixa viabilidade celular (p<0.05) em todos materiais testados quando comparado ao controle. A atividade de ALP em 1 e 7 dias foi similar ao controle (p>0.05). MTA e CSC tiveram significante aumento na atividade de ALP aos 3 dias quando comarados ao controle (p>0.05). Todos os materiais apresentaram grande produção de nódulos mineralizados quando comparados ao controle (P<0.05). A análise da SEM mostrou estruturas que sugerem a presença de depósitos de fosfato de cálcio na superfície dos materiais demonstrando bioatividade. O Yb2O3 mostrou ser um agente radiopacificador adequado em cimentos à base de silicato de cálcio uma vez que não afetou as propriedades físico-químicas e biológicas e ainda preservou o potencial bioativo desse material.

Surgical treatment of cementoblastoma associated with apicoectomy and endodontic therapy: Case report.

This case report describes the surgical removal of cementoblastoma associated with apicoectomy and endodontic therapy. The patient, an 18-year-old man, presented pain in the region of the mandibular body on the right side. On clinical exam, bone expansion was observed in the region at the bottom of the vestibular sulcus, pain on palpation, slight extrusion of tooth 46 with presence of pulp vitality. Radiographic exams demonstrated the presence of a radiopaque area and discrete radiolucent halo associated with the root of tooth 46, suggesting the diagnosis of cementoblastoma. Endodontic treatment of tooth 46 was performed and exeresis of the lesion by apicoectomy. Twelve months after the first surgery, recurrence of the lesion was observed, and a new apicoectomy was necessary, this time up to the middle third of the root. Clinical radiographic control 12 mo after the second surgical intervention demonstrated absence of signs and symptoms, radiographic repair, with tooth 46 shown to be fully functional.

Push-out Bond Strength of Root-end Filling Materials

Abstract The aim of this study was to evaluate the bond strength of root-end filling materials. Forty 2-mm-thick slices were obtained from human single-rooted teeth. After root canal preparation using a 1.5 mm diameter cylindrical drill, the dentinal walls were prepared by diamond ultrasonic tip (CVD T0F-2). The specimens were divided according the material (n=10): MTA Angelus (MTAA), MTA Sealer (MTAS, experimental), Sealer 26 (S26) and zinc oxide and eugenol cement (ZOE). The push-out test was performed in a mechanical test machine (EMIC DL 2000) at 1 mm/min speed. The failure type was evaluated by stereomicroscopy. The results were subjected to ANOVA and Tukey test, at 5% significance level. MTAA (19.18 MPa), MTAS (19.13 MPa) and S26 (15.91 MPa) showed higher bond strength (p<0.05). ZOE (9.50 MPa) showed the least bond strength values (p<0.05). Adhesive failure was prevalent in all groups, except for ZOE, which showed mixed failures. It was concluded that root-end filling materials MTA Angelus, MTA Sealer and Sealer 26 showed higher bond strength to dentinal walls than zinc oxide and eugenol cement after retrograde preparation.

Resumo O objetivo deste estudo foi avaliar a resistência de união de materiais retrobturadores. Quarenta fatias de 2 mm de espessura foram obtidas a partir de dentes unirradiculares humanos. Após o preparo do canal radicular usando uma broca cilíndrica de 1,5 mm de diâmetro, as paredes de dentina foram preparadas usando uma ponta de ultra-som diamantada (CVD T0F-2). As amostras foram divididas de acordo com os materiais (n=10): MTA Angelus (MTAA), MTA Sealer (MTAS, experimental), Sealer 26 (S26) e óxido de zinco e eugenol (ZOE). O teste de push-out foi realizado utilizando uma máquina de ensaios mecânicos (EMIC DL 2000) com velocidade de 1 mm/min. O tipo de falha foi avaliado em estereomicroscópio. Os resultados foram submetidos a ANOVA e teste de Tukey, com níveis de variância de 5%. MTAA (19,18 MPa), MTAS (19,13 MPa) e S26 (15,91 MPa) apresentaram os maiores valores de resistência de união (p<0,05). ZOE (9,50 MPa) apresentou os menores valores de resistência de união (p<0,05). A falha adesiva foi prevalente em todos os grupos, com exceção do ZOE, que apresentou falhas mistas. Concluiu-se que os materiais retrobturadores MTA Angelus, MTA Sealer e Sealer 26 apresentam maior resistência de união às paredes dentinárias que o óxido de zinco e eugenol após o preparo retrógrado.

Push-out Bond Strength of Root-end Filling Materials.

The aim of this study was to evaluate the bond strength of root-end filling materials. Forty 2-mm-thick slices were obtained from human single-rooted teeth. After root canal preparation using a 1.5 mm diameter cylindrical drill, the dentinal walls were prepared by diamond ultrasonic tip (CVD T0F-2). The specimens were divided according the material (n=10): MTA Angelus (MTAA), MTA Sealer (MTAS, experimental), Sealer 26 (S26) and zinc oxide and eugenol cement (ZOE). The push-out test was performed in a mechanical test machine (EMIC DL 2000) at 1 mm/min speed. The failure type was evaluated by stereomicroscopy. The results were subjected to ANOVA and Tukey test, at 5% significance level. MTAA (19.18 MPa), MTAS (19.13 MPa) and S26 (15.91 MPa) showed higher bond strength (p<0.05). ZOE (9.50 MPa) showed the least bond strength values (p<0.05). Adhesive failure was prevalent in all groups, except for ZOE, which showed mixed failures. It was concluded that root-end filling materials MTA Angelus, MTA Sealer and Sealer 26 showed higher bond strength to dentinal walls than zinc oxide and eugenol cement after retrograde preparation.

Effect of zirconium oxide and zinc oxide nanoparticles on physicochemical properties and antibiofilm activity of a calcium silicate-based material.

The aim of the present study was to evaluate the antibiofilm activity against Enterococcus faecalis, compressive strength. and radiopacity of Portland cement (PC) added to zirconium oxide (ZrO2), as radiopacifier, with or without nanoparticulated zinc oxide (ZnO). The following experimental materials were evaluated: PC, PC + ZrO2, PC + ZrO2 + ZnO (5%), and PC + ZrO2 + ZnO (10%). Antibiofilm activity was analyzed by using direct contact test (DCT) on Enterococcus faecalis biofilm, for 5 h or 15 h. The analysis was conducted by using the number of colony-forming units (CFU/mL). The compressive strength was performed in a mechanical testing machine. For the radiopacity tests, the specimens were radiographed together with an aluminium stepwedge. The results were submitted to ANOVA and Tukey tests, with level of significance at 5%. The results showed that all materials presented similar antibiofilm activity (P > 0.05). The addition of nanoparticulated ZnO decreased the compressive strength of PC. All materials presented higher radiopacity than pure PC. It can be concluded that the addition of ZrO2 and ZnO does not interfere with the antibiofilm activity and provides radiopacity to Portland cement. However, the presence of ZnO (5% or 10%) significantly decreased the compressive strength of the materials.

Análise físico-química do MTA e do cimento Portland associado a quatro diferentes radiopacificadores / Physicochemical analysis of MTA and Portland cement associated with four different radiopacifiers

Introdução: O Mineral Trióxido Agregado (MTA) é composto por cimento Portland (CP) e um radiopacificador (óxido de bismuto). Objetivo: Avaliar tempo de presa, solubilidade, pH, liberação de íons Cálcio e radiopacidade do cimento Portland puro ou associado a quatro radiopacificadores (sulfato de bário, carbonato de bismuto, óxido de bismuto e iodofórmio), comparados ao MTA branco (Angelus, Londrina, Brasil). Material e Método: A proporção empregada CP/radiopacificador foi de 4:1 em peso, (80% de cimento Portland e 20% de radiopacificador). A especificação 57 da ADA foi usada para avaliação do tempo de presa. A solubilidade foi analisada segundo a especificação ISO 6876/2001. A avaliação do pH foi realizada com peagâmetro digital e a liberação de íons Ca++foi verificada por meio de espectrofotômetro de absorção atômica. A radiopacidade foi determinada em milímetros de alumínio (mm/Al). Os resultados foram submetidos aos testes de Análise de Variância e Tukey, nível de significância 5%. Resultado: O sulfato de bário não alterou o tempo de presa final do CP. Radiopacidade inferior ao mínimo recomendado pelas normas da ADA nº 57 e ISO 6876/2001 foi observada para CP e CP associado com sulfato de bário. O CP associado ao iodofórmio apresentou solubilidade acima dos 3% recomendados pela ISO 6876/2001. Todos os materiais proporcionaram alcalinização do meio e promoveram liberação de íons cálcio. Conclusão: Carbonato de bismuto ou óxido de bismuto proporcionaram tempo de presa inicial, solubilidade, pH, liberação de íons Cálcio e radiopacidade adequados quando associados ao CP. .

Introduction: Mineral Trioxide Aggregate (MTA) is composed of Portland cement (PC), and a radiopacifier (bismuth oxide). Objective: To evaluate the setting time, solubility, pH, calcium ion release and radiopacity of pure Portland cement and its association to four radiopacifiers, (Barium sulfate, bismuth carbonate, bismuth oxide and iodoform), and White MTA (Angelus, Londrina, Brazil). Material and Method: The ratio CP/radiopacifier used was 4:1 by weight (80% Portland cement and 20% radiopacifier). The setting time was evaluated according the specification ADA 57. The solubility was analyzed according to ISO 6876/2001 specification. The pH was evaluated using a digital pHmeter and the release of Ca++ ions by atomic absorption spectrophotometer. The radiopacity was measured in millimeters of aluminum (mm/Al). The results were submitted to ANOVA and Tukey tests using 5% of significance level. Result: Barium sulfate did not alter the final setting time of the PC. Observed radiopacity was less than the minimum recommended by ADA 57 and ISO 6876/2001 for CP and CP associated with barium sulfate. The PC associated with iodoform showed solubility above the 3% recommended by ISO 6876/2001. All materials provided alkalinization and promoted calcium ion release. Conclusion: Bismuth carbonate and bismuth oxide provided proper initial setting time, solubility, pH, calcium ion release and radiopacity when combined with CP. .

Radiopacity, pH and antimicrobial activity of Portland cement associated with micro- and nanoparticles of zirconium oxide and niobium oxide.

The aim of this study was to evaluate some properties of the calcium silicate materials Mineral Trioxide Aggregate (MTA) and Portland cement (PC) with microparticulated (micro) and nanoparticulated (nano) zirconium oxide (ZrO2) or niobium oxide (Nb2O5). The experimental materials: White PC (PC), MTA-Angelus(®) (MTA), PC+ZrO2micro, PC+ZrO2nano, PC+Nb2O5micro and PC+Nb2O5nano were submitted to radiopacity and pH evaluations. Furthermore, the antimicrobial activity against different microorganisms was assessed by agar diffusion test. MTA presented higher radiopacity than other materials. However, all materials except PC presented higher radiopacity than recommended by ISO/ADA. MTA promoted higher pH values in all analyzed periods (p≤0.05). At the initial periods, PC and PC+ZrO2micro showed pH similar to MTA. All materials showed antimicrobial activity against the evaluated microorganisms. In conclusion, ZrO2 and Nb2O5 could be alternative radiopacifiers to be added to calcium silicate materials.

Resin pins: a novel composite resin concept for treatment of posterior teeth--technical presentation.

With the evolution of bonding systems, various techniques have been proposed to reduce polymerization shrinkage and postoperative sensitivity in posterior direct resin restorations. It has been noted that the result could be improved using various layers, due to the contractions that occur proportionally to the quantity of material and the intensity of the curing light during polymerization. This article reviews the use of small, prepolymerized composite resin pearls or inserts compressed against the surface of the tooth wall to reduce the volume to be polymerized. The use of resin pins enables superior bonding to the dental structure, incrementing the marginal adaptation and reducing postoperative sensitivity.