The 2021 Magnonics Roadmap.

Magnonics is a budding research field in nanomagnetism and nanoscience that addresses the use of spin waves (magnons) to transmit, store, and process information. The rapid advancements of this field during last one decade in terms of upsurge in research papers, review articles, citations, proposals of devices as well as introduction of new sub-topics prompted us to present the first roadmap on magnonics. This is a collection of 22 sections written by leading experts in this field who review and discuss the current status besides presenting their vision of future perspectives. Today, the principal challenges in applied magnonics are the excitation of sub-100 nm wavelength magnons, their manipulation on the nanoscale and the creation of sub-micrometre devices using low-Gilbert damping magnetic materials and its interconnections to standard electronics. To this end, magnonics offers lower energy consumption, easier integrability and compatibility with CMOS structure, reprogrammability, shorter wavelength, smaller device features, anisotropic properties, negative group velocity, non-reciprocity and efficient tunability by various external stimuli to name a few. Hence, despite being a young research field, magnonics has come a long way since its early inception. This roadmap asserts a milestone for future emerging research directions in magnonics, and hopefully, it will inspire a series of exciting new articles on the same topic in the coming years.

Localized mechanical stimulation of single cells with engineered spatio-temporal profile.

In vivo, cells are frequently exposed to multiple mechanical stimuli arising from the extracellular microenvironment, with a deep impact on many biological functions. On the other hand, current methods for mechanobiology do not allow one to easily replicate in vitro the complex spatio-temporal profile of such mechanical signals. Here we introduce a new platform for studying the mechanical coupling between single cells and a dynamic extracellular environment, based on active substrates for cell culture made of Fe-coated polymeric micropillars. Under the action of quasi-static external magnetic fields, each group of pillars produces synchronous mechanical stimuli at different points of the cell membrane, thanks to the highly controllable pillars' deflection. This method allows one to apply complex stress fields, resulting in the parallel application of localized forces with tunable intensity and temporal profile. The platform has been validated by studying the cellular response to periodic stimuli in NIH3T3 fibroblasts. We find that low-frequency mechanical stimulation affects the actin cytoskeleton, nuclear morphology, and H2B core-histone dynamics and induces MKL transcription-cofactor translocation from nucleus to cytoplasm. The unique capability of the proposed platform to apply stimuli with a tunable temporal profile and high parallelism on a cell culture holds great potential for the investigation of mechanotransduction mechanisms in cells and tissues.

Magnetic domain wall tweezers: a new tool for mechanobiology studies on individual target cells.

In vitro tests are of fundamental importance for investigating cell mechanisms in response to mechanical stimuli or the impact of the genotype on cell mechanical properties. In particular, the application of controlled forces to activate specific bio-pathways and investigate their effects, mimicking the role of the cellular environment, is becoming a prominent approach in the emerging field of mechanobiology. Here, we present an on-chip device based on magnetic domain wall manipulators, which allows the application of finely controlled and localized forces on target living cells. In particular, we demonstrate the application of a magnetic force in the order of hundreds of pN on the membrane of HeLa cells cultured on-chip, via manipulation of 1 µm superparamagnetic beads. Such a mechanical stimulus produces a sizable local indentation of the cellular membrane of about 2 µm. Upon evaluation of the beads' position within the magnetic field originated by the domain wall, the force applied during the experiments is accurately quantified via micromagnetic simulations. The obtained value is in good agreement with that calculated by the application of an elastic model to the cellular membrane.

Thermochemical scanning probe lithography of protein gradients at the nanoscale.

Patterning nanoscale protein gradients is crucial for studying a variety of cellular processes in vitro. Despite the recent development in nano-fabrication technology, combining nanometric resolution and fine control of protein concentrations is still an open challenge. Here, we demonstrate the use of thermochemical scanning probe lithography (tc-SPL) for defining micro- and nano-sized patterns with precisely controlled protein concentration. First, tc-SPL is performed by scanning a heatable atomic force microscopy tip on a polymeric substrate, for locally exposing reactive amino groups on the surface, then the substrate is functionalized with streptavidin and laminin proteins. We show, by fluorescence microscopy on the patterned gradients, that it is possible to precisely tune the concentration of the immobilized proteins by varying the patterning parameters during tc-SPL. This paves the way to the use of tc-SPL for defining protein gradients at the nanoscale, to be used as chemical cues e.g. for studying and regulating cellular processes in vitro.

Nanopatterning reconfigurable magnetic landscapes via thermally assisted scanning probe lithography.

The search for novel tools to control magnetism at the nanoscale is crucial for the development of new paradigms in optics, electronics and spintronics. So far, the fabrication of magnetic nanostructures has been achieved mainly through irreversible structural or chemical modifications. Here, we propose a new concept for creating reconfigurable magnetic nanopatterns by crafting, at the nanoscale, the magnetic anisotropy landscape of a ferromagnetic layer exchange-coupled to an antiferromagnetic layer. By performing localized field cooling with the hot tip of a scanning probe microscope, magnetic structures, with arbitrarily oriented magnetization and tunable unidirectional anisotropy, are reversibly patterned without modifying the film chemistry and topography. This opens unforeseen possibilities for the development of novel metamaterials with finely tuned magnetic properties, such as reconfigurable magneto-plasmonic and magnonic crystals. In this context, we experimentally demonstrate spatially controlled spin wave excitation and propagation in magnetic structures patterned with the proposed method.

Electric field control of magnetic properties and electron transport in BaTiO3-based multiferroic heterostructures.

In this paper, we report on a purely electric mechanism for achieving the electric control of the interfacial spin polarization and magnetoresistance in multiferroic tunneling junctions. We investigate micrometric devices based on the Co/Fe/BaTiO3/La0.7Sr0.3MnO3 heterostructure, where Co/Fe and La0.7Sr0.3MnO3 are the magnetic electrodes and BaTiO3 acts both as a ferroelectric element and tunneling barrier. We show that, at 20 K, devices with a 2 nm thick BaTiO3 barrier present both tunneling electroresistance (TER = 12 ± 0.1%) and tunneling magnetoresistance (TMR). The latter depends on the direction of the BaTiO3 polarization, displaying a sizable change of the TMR from -0.32 ± 0.05% for the polarization pointing towards Fe, to -0.12 ± 0.05% for the opposite direction. This is consistent with the on-off switching of the Fe magnetization at the Fe/BaTiO3 interface, driven by the BaTiO3 polarization, we have previously demonstrated in x-ray magnetic circular dichroism experiments.

Electric control of magnetism at the Fe/BaTiO3 interface.

Interfacial magnetoelectric coupling is a viable path to achieve electrical writing of magnetic information in spintronic devices. For the prototypical Fe/BaTiO3 system, only tiny changes of the interfacial Fe magnetic moment upon reversal of the BaTiO3 dielectric polarization have been predicted so far. Here, by using X-ray magnetic circular dichroism in combination with high-resolution electron microscopy and first principles calculations, we report on an undisclosed physical mechanism for interfacial magnetoelectric coupling in the Fe/BaTiO3 system. At this interface, an ultrathin oxidized iron layer exists, whose magnetization can be electrically and reversibly switched on and off at room temperature by reversing the BaTiO3 polarization. The suppression/recovery of interfacial ferromagnetism results from the asymmetric effect that ionic displacements in BaTiO3 produces on the exchange coupling constants in the interfacial-oxidized Fe layer. The observed giant magnetoelectric response holds potential for optimizing interfacial magnetoelectric coupling in view of efficient, low-power spintronic devices.

Tetragonal phase of epitaxial room-temperature antiferromagnet CuMnAs.

Recent studies have demonstrated the potential of antiferromagnets as the active component in spintronic devices. This is in contrast to their current passive role as pinning layers in hard disk read heads and magnetic memories. Here we report the epitaxial growth of a new high-temperature antiferromagnetic material, tetragonal CuMnAs, which exhibits excellent crystal quality, chemical order and compatibility with existing semiconductor technologies. We demonstrate its growth on the III-V semiconductors GaAs and GaP, and show that the structure is also lattice matched to Si. Neutron diffraction shows collinear antiferromagnetic order with a high Néel temperature. Combined with our demonstration of room-temperature-exchange coupling in a CuMnAs/Fe bilayer, we conclude that tetragonal CuMnAs films are suitable candidate materials for antiferromagnetic spintronics.

Conditions for efficient on-chip magnetic bead detection via magnetoresistive sensors.

A commonly used figure of merit of magnetoresistive sensors employed to detect magnetic beads labeling biomolecules in lab-on-chip applications is the sensor sensitivity (S0) to external magnetic fields in the linear region of the sensor. In this paper we show that, in case of lock-in detection and bead excitation by a small AC magnetic field, S0 is not the good figure of merit to optimize. Indeed, the highest sensitivity to the magnetic beads is achieved biasing the sensor in the region of its characteristics where the product between the DC bias field and the second derivative of the resistance with respect to the magnetic field is maximum. The validity of this criterion, derived from a phenomenological model of bead detection, is proved in case of magnetic tunneling junction sensors detecting magnetic beads with 250nm diameter. This work paves the way to the development of a new generation of sensors properly designed to maximize the bead sensitivity.

Direct observation of a highly spin-polarized organic spinterface at room temperature.

Organic semiconductors constitute promising candidates toward large-scale electronic circuits that are entirely spintronics-driven. Toward this goal, tunneling magnetoresistance values above 300% at low temperature suggested the presence of highly spin-polarized device interfaces. However, such spinterfaces have not been observed directly, let alone at room temperature. Thanks to experiments and theory on the model spinterface between phthalocyanine molecules and a Co single crystal surface, we clearly evidence a highly efficient spinterface. Spin-polarised direct and inverse photoemission experiments reveal a high degree of spin polarisation at room temperature at this interface. We measured a magnetic moment on the molecule's nitrogen π orbitals, which substantiates an ab-initio theoretical description of highly spin-polarised charge conduction across the interface due to differing spinterface formation mechanisms in each spin channel. We propose, through this example, a recipe to engineer simple organic-inorganic interfaces with remarkable spintronic properties that can endure well above room temperature.

Growth of ultrathin epitaxial Fe/MgO spin injector on (0, 0, 1) (Ga, Mn)As.

We have grown an ultrathin epitaxial Fe/MgO bilayer on (Ga, Mn)As by e-beam evaporation in UHV. The system structure has been investigated by high resolution transmission electron microscopy (TEM) experiments which show that the Fe and MgO films, covering completely the (Ga, Mn)As, grow with the epitaxial relationship Fe[100](001) [parallel] MgO[110](001) [parallel] (Ga,Mn)As[110](001). The magnetic reversal process, studied by the magneto-optical Kerr effect (MOKE) at room temperature, demonstrates that the iron is ferromagnetic and possesses a cubic anisotropy, confirming the epitaxy relationship found with TEM. Resistivity measurements across the barrier display a non-Ohmic behavior characterized by cubic conductance as a function of the applied voltage suggesting tunneling-dominated transport across the barrier.

Magnetic domain wall conduits for single cell applications.

The ability to trap, manipulate and release single cells on a surface is important both for fundamental studies of cellular processes and for the development of novel lab-on-chip miniaturized tools for biological and medical applications. In this paper we demonstrate how magnetic domain walls generated in micro- and nano-structures fabricated on a chip surface can be used to handle single yeast cells labeled with magnetic beads. In detail, first we show that the proposed approach maintains the microorganism viable, as proven by monitoring the division of labeled yeast cells trapped by domain walls over 16 hours. Moreover, we demonstrate the controlled transport and release of individual yeast cells via displacement and annihilation of individual domain walls in micro- and nano-sized magnetic structures. These results pave the way to the implementation of magnetic devices based on domain walls technology in lab-on-chip systems devoted to accurate individual cell trapping and manipulation.

Using half-metallic manganite interfaces to reveal insights into spintronics.

A half-metal has been defined as a material with propagating electron states at the Fermi energy only for one of the two possible spin projections, and as such has been promoted as an interesting research direction for spin electronics. This review details recent advances on manganite thin film research within the field of spintronics, before presenting the structural, electronic and spin-polarized solid-state tunnelling transport studies that we have performed on heterostructures involving La(2/3)Sr(1/3)MnO(3) thin films separated by SrTiO(3) barriers. These experiments demonstrate that, with a polarization of spin [Formula: see text] electrons at the Fermi level that can reach 99%, the La(2/3)Sr(1/3)MnO(3)/SrTiO(3) interface for all practical purposes exhibits half-metallic behaviour. We offer insight into the electronic structure of the interface, including the electronic symmetry of any remaining spin [Formula: see text] states at the Fermi level. Finally, we present experiments that use the experimental half-metallic property of manganites as tools to reveal novel features of spintronics.

Spin-polarized tunneling spectroscopy in tunnel junctions with half-metallic electrodes.

We have studied the magnetoresistance (TMR) of tunnel junctions with electrodes of La(2/3)Sr(1/3)MnO3 and we show how the variation of the conductance and TMR with the bias voltage can be exploited to obtain precise information on the spin and energy dependence of the density of states. Our analysis leads to a quantitative description of the band structure of La(2/3)Sr(1/3)MnO3 including the energy gap delta between the Fermi level and the bottom of the t(2g) minority-spin band, in good agreement with data from spin-polarized inverse photoemission experiments. This shows the potential of magnetic tunnel junctions with half-metallic electrodes for spin-resolved spectroscopic studies.