RESUMO
The first magnetic ligand-based electrochemical assay aimed at the determination of BRD4 was developed and validated. BRD4 is an epigenetic regulator of great interest in oncology in relation to its overexpression observed in the pathogenesis of several cancer diseases. BRD4 also represents a major target for the development of innovative treatments aimed at protein inhibition or degradation. Despite the relevance of BRD4 both for diagnostics and therapeutic purposes, current methodologies for its determination are limited to commercial ELISA kits. We present a novel magnetic ligand-based assay for the electrochemical determination of BRD4. The developed assay is based on the use of a small synthetic fragment of the natural protein ligand for BRD4 as receptor, thus exploiting the intrinsic biological protein-protein recognition mechanism. In addition, the assay features the use of magnetic beads as immobilization platforms and peroxidase-conjugated monoclonal anti-BRD4 antibody for the generation of the electrochemical signal. The ligand-based assay shows outstanding performance in terms of rapidity, with results achievable in less than 20 min, no matrix effect when applied to human plasma or cell lysate samples, and excellent specificity. The proposed method exhibits a limit of detection of 2.66 nM and a response range tunable as a function of the amount of immobilized receptor. The developed ligand-based assay was successfully applied to the accurate determination of BRD4 in untreated cell lysates, as proven by the ELISA reference method. The good performance of the proposed bioassay for determination of BRD4 showed potential application of this strategy in convenient point-of-care testing.
Assuntos
Proteínas de Ciclo Celular , Técnicas Eletroquímicas , Fatores de Transcrição , Humanos , Ligantes , Fatores de Transcrição/metabolismo , Técnicas Eletroquímicas/métodos , Proteínas Nucleares/análise , Fenômenos Magnéticos , Ensaio de Imunoadsorção Enzimática/métodos , Limite de Detecção , Proteínas que Contêm BromodomínioRESUMO
Organosilica nanoparticles that contain responsive organic building blocks as constitutive components of the silica network offer promising opportunities for the development of innovative drug formulations, biomolecule delivery, and diagnostic tools. However, the synthetic challenges required to introduce dynamic and multifunctional building blocks have hindered the realization of biomimicking nanoparticles. In this study, capitalizing on our previous research on responsive nucleic acid-based organosilica nanoparticles, we combine the supramolecular programmability of nucleic acid (NA) interactions with sol-gel chemistry. This approach allows us to create dynamic supramolecular bridging units of nucleic acids in a silica-based scaffold. Two peptide nucleic acid-based monoalkoxysilane derivatives, which self-assemble into a supramolecular bis-alkoxysilane through direct base pairing, were chosen as the noncovalent units inserted into the silica network. In addition, a bridging functional NA aptamer leads to the specific recognition of ATP molecules. In a one-step bottom-up approach, the resulting supramolecular building blocks can be used to prepare responsive organosilica nanoparticles. The supramolecular Watson-Crick-Franklin interactions of the organosilica nanoparticles result in a programmable response to external physical (i.e., temperature) and biological (i.e., DNA and ATP) inputs and thus pave the way for the rational design of multifunctional silica materials with application from drug delivery to theranostics.
Assuntos
Nanopartículas , Ácidos Nucleicos , Sistemas de Liberação de Medicamentos , Nanopartículas/química , Dióxido de Silício/química , Trifosfato de AdenosinaRESUMO
The development of smart nanoparticles (NPs) that encode responsive features in the structural framework promises to extend the applications of NP-based drugs, vaccines, and diagnostic tools. New nanocarriers would ideally consist of a minimal number of biocompatible components and exhibit multiresponsive behavior to specific biomolecules, but progress is limited by the difficulty of synthesizing suitable building blocks. Through a nature-inspired approach that combines the programmability of nucleic acid interactions and sol-gel chemistry, we report the incorporation of synthetic nucleic acids and analogs, as constitutive components, into organosilica NPs. We prepared different nanomaterials containing single-stranded nucleic acids that are covalently embedded in the silica network. Through the incorporation of functional nucleic acids into the organosilica framework, the particles respond to various biological, physical, and chemical inputs, resulting in detectable physicochemical changes. The one-step bottom-up approach used to prepare organosilica NPs provides multifunctional systems that combine the tunability of oligonucleotides with the stiffness, low cost, and biocompatibility of silica for different applications ranging from drug delivery to sensing.
Assuntos
Nanopartículas , Ácidos Nucleicos , Sistemas de Liberação de Medicamentos/métodos , Nanopartículas/química , Dióxido de Silício/químicaRESUMO
Traditional techniques for food analysis are based on off-line laboratory methods that are expensive and time-consuming and often require qualified personnel. Despite the high standards of accuracy and metrological traceability, these well-established methods do not facilitate real-time process monitoring and timely on-site decision-making as required for food safety and quality control. The future of food testing includes rapid, cost-effective, portable, and simple methods for both qualitative screening and quantification of food contaminants, as well as continuous, real-time measurement in production lines. Process automatization through process analytical technologies (PAT) is an increasing trend in the food industry as a way to achieve improved product quality, safety, and consistency, reduced production cycle times, minimal product waste or reworks, and the possibility for real-time product release. Novel methods of analysis for point-of-need (PON) screening could greatly improve food testing by allowing non-experts, such as consumers, to test in situ food products using portable instruments, smartphones, or even visual naked-eye inspections, or farmers and small producers to monitor products in the field. This requires the attention of the research community and devices manufacturers to ensure reliability of measurement results from PAT strategy and PON tests through the demonstration and critical evaluation of performance characteristics. The fitness for purpose of methods in real-life conditions is a priority that should not be overlooked in order to maintain an effective and harmonized food safety policy.
Assuntos
Inocuidade dos Alimentos , Reprodutibilidade dos Testes , Inocuidade dos Alimentos/métodos , Controle de Qualidade , Padrões de ReferênciaRESUMO
Efficient and timely testing has taken center stage in the management, control, and monitoring of the current COVID-19 pandemic. Simple, rapid, cost-effective diagnostics are needed that can complement current polymerase chain reaction-based methods and lateral flow immunoassays. Here, we report the development of an electrochemical sensing platform based on single-walled carbon nanotube screen-printed electrodes (SWCNT-SPEs) functionalized with a redox-tagged DNA aptamer that specifically binds to the receptor binding domain of the SARS-CoV-2 spike protein S1 subunit. Single-step, reagentless detection of the S1 protein is achieved through a binding-induced, concentration-dependent folding of the DNA aptamer that reduces the efficiency of the electron transfer process between the redox tag and the electrode surface and causes a suppression of the resulting amperometric signal. This aptasensor is specific for the target S1 protein with a dissociation constant (KD) value of 43 ± 4 nM and a limit of detection of 7 nM. We demonstrate that the target S1 protein can be detected both in a buffer solution and in an artificial viral transport medium widely used for the collection of nasopharyngeal swabs, and that no cross-reactivity is observed in the presence of different, non-target viral proteins. We expect that this SWCNT-SPE-based format of electrochemical aptasensor will prove useful for the detection of other protein targets for which nucleic acid aptamer ligands are made available.
Assuntos
Aptâmeros de Nucleotídeos , Técnicas Biossensoriais , COVID-19 , Aptâmeros de Nucleotídeos/química , Técnicas Biossensoriais/métodos , COVID-19/diagnóstico , Técnicas Eletroquímicas/métodos , Eletrodos , Humanos , Limite de Detecção , Pandemias , SARS-CoV-2 , Glicoproteína da Espícula de CoronavírusRESUMO
Carbon nanotube (CNT)-based electrodes are cheap, highly performing, and robust platforms for the fabrication of electrochemical sensors. Engineering programmable DNA nanotechnologies on the CNT surface can support the construction of new electrochemical DNA sensors providing an amperometric output in response to biomolecular recognition. This is a significant challenge, since it requires gaining control of specific hybridization processes and functional DNA systems at the interface, while limiting DNA physisorption on the electrode surface, which contributes to nonspecific signal. In this study, we provide design rules to program dynamic DNA structures at the surface of single-walled carbon nanotubes electrodes, showing that specific DNA interactions can be monitored through measurement of the current signal provided by redox-tagged DNA strands. We propose the use of pyrene as a backfilling agent to reduce nonspecific adsorption of reporter DNA strands and demonstrate the controlled formation of DNA duplexes on the electrode surface, which we then apply in the design and conduction of programmable DNA strand displacement reactions. Expanding on this aspect, we report the development of novel amperometric hybridization platforms based on artificial DNA structures templated by the small molecule melamine. These platforms enable dynamic strand exchange reactions orthogonal to conventional toehold-mediated strand displacement and may support new strategies in electrochemical sensing of biomolecular targets, combining the physicochemical properties of nanostructured carbon-based materials with programmable nucleic acid hybridization.
Assuntos
Nanotubos de Carbono , DNA/química , Eletrodos , Nanotecnologia , Nanotubos de Carbono/química , Hibridização de Ácido NucleicoRESUMO
An outlook on the current status of different strategies for magnetic micro- and nanosized bead functionalization with aptamers as prominent bioreceptors is given with a focus on electrochemical and optical apta-assays, as well as on aptamer-modified magnetic bead-based miniaturized extraction techniques in food control. Critical aspects that affect interaction of aptamers with target molecules, as well as the possible side effects caused by aptamer interaction with other molecules due to non-specific binding, are discussed. Challenges concerning the real potential and limitations of aptamers as bioreceptors when facing analytical problems in food control are addressed.
Assuntos
Aptâmeros de Nucleotídeos/química , Análise de Alimentos/métodos , Fenômenos Magnéticos , Microesferas , Técnicas Biossensoriais , Microbiologia de Alimentos , Ouro , NanocompostosRESUMO
Peptide nucleic acids (PNAs) are a class of artificial oligonucleotide mimics that have garnered much attention as precision biotherapeutics for their efficient hybridization properties and their exceptional biological and chemical stability. However, the poor cellular uptake of PNA is a limiting factor to its more extensive use in biomedicine; encapsulation in nanoparticle carriers has therefore emerged as a strategy for internalization and delivery of PNA in cells. In this study, we demonstrate that PNA can be readily loaded into porous silicon nanoparticles (pSiNPs) following a simple salt-based trapping procedure thus far employed only for negatively charged synthetic oligonucleotides. We show that the ease and versatility of PNA chemistry also allows for producing PNAs with different net charge, from positive to negative, and that the use of differently charged PNAs enables optimization of loading into pSiNPs. Differently charged PNA payloads determine different release kinetics and allow modulation of the temporal profile of the delivery process. In vitro silencing of a set of specific microRNAs using a pSiNP-PNA delivery platform demonstrates the potential for biomedical applications.
Assuntos
MicroRNAs , Nanopartículas , Ácidos Nucleicos Peptídicos , MicroRNAs/genética , Nanopartículas/química , Oligonucleotídeos , Ácidos Nucleicos Peptídicos/química , Porosidade , Silício/químicaRESUMO
Scaffolds made from biocompatible polymers provide physical cues to direct the extension of neurites and to encourage repair of damaged nerves. The inclusion of neurotrophic payloads in these scaffolds can substantially enhance regrowth and repair processes. However, many promising neurotrophic candidates are excluded from this approach due to incompatibilities with the polymer or with the polymer processing conditions. This work provides one solution to this problem by incorporating porous silicon nanoparticles (pSiNPs) that are pre-loaded with the therapeutic into a polymer scaffold during fabrication. The nanoparticle-drug-polymer hybrids are prepared in the form of oriented poly(lactic-co-glycolic acid) nanofiber scaffolds. We test three different therapeutic payloads: bpV(HOpic), a small molecule inhibitor of phosphatase and tensin homolog (PTEN); an RNA aptamer specific to tropomyosin-related kinase receptor type B (TrkB); and the protein nerve growth factor (NGF). Each therapeutic is loaded using a loading chemistry that is optimized to slow the rate of release of these water-soluble payloads. The drug-loaded pSiNP-nanofiber hybrids release approximately half of their TrkB aptamer, bpV(HOpic), or NGF payload in 2, 10, and >40 days, respectively. The nanofiber hybrids increase neurite extension relative to drug-free control nanofibers in a dorsal root ganglion explant assay.
RESUMO
Integrating dynamic DNA nanotechnology with protein-controlled actuation will expand our ability to process molecular information. We have developed a strategy to actuate strand displacement reactions using DNA-binding proteins by engineering synthetic DNA translators that convert specific protein-binding events into trigger inputs through a programmed conformational change. We have constructed synthetic DNA networks responsive to two different DNA-binding proteins, TATA-binding protein and Myc-Max, and demonstrated multi-input activation of strand displacement reactions. We achieved protein-controlled regulation of a synthetic RNA and of an enzyme through artificial DNA-based communication, showing the potential of our molecular system in performing further programmable tasks.
Assuntos
DNA/química , Ácidos Nucleicos/química , Proteínas/química , Nanoestruturas/química , Ligação ProteicaRESUMO
DNA nanodevices have been developed as platforms for the manipulation of gene expression, delivery of molecular payloads, and detection of various molecular targets within cells and in other complex biological settings. Despite efforts to translate DNA nanodevices from the test tube (in vitro) to living cells, their intracellular trafficking and functionality remain poorly understood. Herein, quantitative and super-resolution microscopy approaches were employed to track and visualise, with nanometric resolution, the molecular interactions between a synthetic DNA nanosensor and transcription factors in intracellular compartments. Specifically, fluorescence resonance energy transfer microscopy, fluorescence correlation spectroscopy, fluorescence lifetime imaging microscopy and multicolour single-molecule localisation microscopy were employed to probe the specific binding of the DNA nanosensor to the nuclear factor kappa-light-chain-enhancer of activated B cells (NF-κB). We monitored the mobility, subcellular localisation and degradation of the DNA nanosensor inside living prostate cancer PC3 cells. Super-resolution imaging enabled the direct visualisation of the molecular interactions between the synthetic DNA nanosensors and the NF-κB molecules in cells. This study represents a significant advance in the effective detection as well as understanding of the intracellular dynamics of DNA nanosensors in a complex biological milieu.
Assuntos
NF-kappa B , Transdução de Sinais , DNA , Proteínas de Ligação a DNA , Transferência Ressonante de Energia de Fluorescência , Humanos , Masculino , NF-kappa B/genética , NF-kappa B/metabolismoRESUMO
The fundamental concept of effective molarity is observed in a variety of biological processes, such as protein compartmentalization within organelles, membrane localization and signaling paths. To control molecular encountering and promote effective interactions, nature places biomolecules in specific sites inside the cell in order to generate a high, localized concentration different from the bulk concentration. Inspired by this mechanism, scientists have artificially recreated in the lab the same strategy to actuate and control artificial DNA-based functional systems. Here, it is discussed how harnessing effective molarity has led to the development of a number of proximity-induced strategies, with applications ranging from DNA-templated organic chemistry and catalysis, to biosensing and protein-supported DNA assembly.
Assuntos
DNA/análise , DNA/química , Técnicas Biossensoriais , Catálise , Química Orgânica , Proteínas/químicaRESUMO
Synthetic DNA-based oligonucleotides are loaded into porous silicon nanoparticles (pSiNPs) and incorporated into nanofibers of poly(lactide-co-glycolide) (PLGA), poly-l-lactic acid (PLA), or polycaprolactone (PCL). The resulting hybrid nanofibers are characterized for their ability to release the functional oligonucleotide payload under physiologic conditions. Under temperature and pH conditions mimicking physiological values, the PLGA-based nanofibers release >80% of their DNA cargo within 5 days, whereas the PLA and PCL-based fibers require 15 days to release >80% of their cargo. The quantity of DNA released scales with the quantity of DNA-loaded pSiNPs embedded in the nanofibers; mass loadings of between 2.4 and 9.1% (based on mass of DNA-pSiNP construct relative to mass of polymer composite) are investigated. When a responsive DNA-based nanodevice (i.e. molecular beacon) is used as a payload, it retains its functionality during the release period, independent of the polymer used for the formation of the nanofibers.
Assuntos
DNA/química , Nanopartículas/química , Oligonucleotídeos/química , Polímeros/química , Silício/química , Preparações de Ação Retardada/química , Concentração de Íons de Hidrogênio , Teste de Materiais , Nanofibras , Poliésteres/química , Ácido Poliglicólico/química , Copolímero de Ácido Poliláctico e Ácido Poliglicólico/química , Porosidade , Medicina Regenerativa , Razão Sinal-RuídoRESUMO
Biocompatible hydrogels are materials that hold great promise in medicine and biology since the porous structure, the ability to entrap a large amount of water, and the tunability of their mechanical and tissue adhesive properties make them suitable for several applications, including wound healing, drug and cell delivery, cancer treatment, bioelectronics, and tissue regeneration. Among the possible developed systems, injectable hydrogels, owing to their properties, are optimal candidates for in vivo minimally invasive procedures. To be injectable, a hydrogel must be liquid before and during the injection, but it must quickly jellify after injection to form a soft, self-standing, solid material. The possibility to work with a liquid precursor encoding the functions that will be available after gelation allows the development of biocompatible materials that can be employed in surgery and, in particular, in noninvasive procedures. The underlying idea is to reach the target tissue by using just a needle, or by exploiting the natural body orifices, reducing surgery procedure time, induced pain, and risk of infections. Hydrogels with different properties can be obtained by changing the type of cross-linking, the cross-linking density or the molecular weight of the polymer, or by introducing pending functional groups. The introduction of a nanofiller in the hydrogel network allows for expanding the suite of the structural and functional properties and for better mimicking native tissues. In this Account, we discuss how to provide a hydrogel network with designed properties by playing with both the polymeric chains and the fillers. We present selected examples from the literature that show how to introduce stiffness, stretchability, adhesiveness, self-healing, anisotropy, antimicrobial activity, biodegradability, and conductivity in injectable hydrogels. We further describe how the chemical composition, the mechanical properties, and the microarchitecture of the hydrogel influence cell adhesion, proliferation, and differentiation. Examples of injectable hydrogels for innovative minimally invasive procedures are then discussed in detail; in particular, we showcase the use of hydrogels for tumor resection and as vascular chemoembolization agents. We further discuss how one can improve the rheological properties of injectable hydrogels to exploit them in osteochondral tissue engineering. The effect of the introduction of a conductive filler is then presented in relation to the development of electroactive scaffolds for cardiac-tissue engineering and neural and nerve repair. We believe that the rational design of biocompatible, injectable hybrid hydrogels with tunable properties will likely play a crucial role in reducing the invasiveness and improving the outcome of several clinical and surgical setups.
Assuntos
Materiais Biocompatíveis/química , Procedimentos Cirúrgicos Minimamente Invasivos/métodos , Nanogéis/química , Alicerces Teciduais/química , Animais , Materiais Biocompatíveis/administração & dosagem , Cartilagem/metabolismo , Humanos , Injeções , Nanogéis/administração & dosagem , Porosidade , Engenharia Tecidual/métodosRESUMO
Silencing of aberrantly expressed microRNAs (miRNAs or miRs) has emerged as one of the strategies for molecular targeted cancer therapeutics. In particular, miR-21 is an oncogenic miRNA overexpressed in many tumors, including ovarian cancer. To achieve efficient administration of anti-miR therapeutics, delivery systems are needed that can ensure local accumulation in the tumor environment, low systemic toxicity, and reduced adverse side effects. In order to develop an improved anti-miR therapeutic agent for the treatment of ovarian cancer, a nanoformulation is engineered that leverages biodegradable porous silicon nanoparticles (pSiNPs) encapsulating an anti-miR-21 locked nucleic acid payload and displaying a tumor-homing peptide for targeted distribution. Targeting efficacy, miR-21 silencing, and anticancer activity are optimized in vitro on a panel of ovarian cancer cell lines, and a formulation of anti-miR-21 in a pSiNP displaying the targeting peptide CGKRK is identified for in vivo evaluation. When this nanoparticulate agent is delivered to mice bearing tumor xenografts, a substantial inhibition of tumor growth is achieved through silencing of miR-21. This study presents the first successful application of tumor-targeted anti-miR porous silicon nanoparticles for the treatment of ovarian cancer in a mouse xenograft model.
Assuntos
Portadores de Fármacos , MicroRNAs , Nanopartículas , Neoplasias Ovarianas , Silício , Animais , Linhagem Celular Tumoral , Portadores de Fármacos/química , Portadores de Fármacos/farmacologia , Feminino , Humanos , Camundongos , Camundongos Nus , MicroRNAs/química , MicroRNAs/genética , MicroRNAs/farmacologia , Nanopartículas/química , Nanopartículas/uso terapêutico , Neoplasias Ovarianas/tratamento farmacológico , Neoplasias Ovarianas/genética , Neoplasias Ovarianas/metabolismo , Neoplasias Ovarianas/patologia , Porosidade , Silício/química , Silício/farmacologia , Ensaios Antitumorais Modelo de XenoenxertoRESUMO
The emerging field of RNA nanotechnology harnesses the versatility of RNA molecules to generate nature-inspired systems with programmable structure and functionality. Such methodology has therefore gained appeal in the fields of biosensing and diagnostics, where specific molecular recognition and advanced input/output processing are demanded. The use of RNA modules and components allows for achieving diversity in structure and function, for processing information with molecular precision, and for programming dynamic operations on the grounds of predictable non-covalent interactions. When RNA nanotechnology meets bioanalytical chemistry, sensing of target molecules can be performed by harnessing programmable interactions of RNA modules, advanced field-ready biosensors can be manufactured by interfacing RNA-based devices with supporting portable platforms, and RNA sensors can be engineered to be genetically encoded allowing for real-time imaging of biomolecules in living cells. In this article, we report recent advances in RNA-based sensing technologies and discuss current trends in RNA nanotechnology-enabled biomedical diagnostics. In particular, we describe programmable sensors that leverage modular designs comprising dynamic aptamer-based units, synthetic RNA nanodevices able to perform target-responsive regulation of gene expression, and paper-based sensors incorporating artificial RNA networks. Graphical Abstract á .
Assuntos
Técnicas Biossensoriais/métodos , Nanotecnologia/métodos , RNA/genéticaRESUMO
The intracellular delivery of nucleic acids and proteins remains a key challenge in the development of biological therapeutics. In gene therapy, the inefficient delivery of small interfering RNA (siRNA) to the cytosol by lipoplexes or polyplexes is often ascribed to the entrapment and degradation of siRNA payload in the endosomal compartments. A possible mechanism by which polyplexes rupture the endosomal membrane and release their nucleic acid cargo is commonly defined as the "proton sponge effect". This is an osmosis-driven process triggered by the proton buffering capacity of polyplexes. Herein, we investigate the molecular basis of the "proton sponge effect" through direct visualization of the siRNA trafficking process, including analysis of individual polyplexes and endosomes, using stochastic optical reconstruction microscopy. We probe the sequential siRNA trafficking steps through single molecule super-resolution analysis of subcellular structures, polyplexes, and silencing RNA molecules. Specifically, individual intact polyplexes released in the cytosol upon rupture of the endosomes, the damaged endosomal vesicles, and the disassembly of the polyplexes in the cytosol are examined. We find that the architecture of the polyplex and the rigidity of the cationic polymer chains are crucial parameters that control the mechanism of endosomal escape driven by the proton sponge effect. We provide evidence that in highly branched and rigid cationic polymers, such as glycogen or polyethylenimine, immobilized on silica nanoparticles, the proton sponge effect is effective in inducing osmotic swelling and rupture of endosomes.
Assuntos
Citoplasma/metabolismo , Endossomos/metabolismo , Membranas Intracelulares/metabolismo , Prótons , RNA Interferente Pequeno/metabolismo , Transporte Biológico , Citoplasma/ultraestrutura , Endossomos/ultraestrutura , Humanos , Membranas Intracelulares/ultraestrutura , Nanopartículas/química , Células PC-3 , RNA Interferente Pequeno/ultraestrutura , Imagem Individual de Molécula/métodosRESUMO
Peptide Nucleic Acids (PNAs) are oligonucleotide mimics that can be used as drugs as they can interact with DNA and RNA targets in organisms. Loading PNAs into inorganic nanocarriers can improve their cellular uptake and co-delivering them together with drugs can improve the therapy efficacy by synergic effects. Furthermore, the functionalization of the carriers with labels allows theranostics, and the possibility to monitor the efficacy of the therapy in real time. The present protocol describes the synthesis of Zeolites-L nanocrystals and mesoporous silica nanoparticles and their loading with cationic PNAs and other smaller molecular weight payloads towards theranostics applications.
Assuntos
Ácidos Nucleicos Peptídicos/química , Dióxido de Silício/química , Zeolitas/química , Sistemas de Liberação de Medicamentos , Células HeLa , Humanos , Peso Molecular , Nanoestruturas/química , Nanomedicina TeranósticaRESUMO
Transcription factor DNA binding activity is of pivotal importance in living systems because of its primary involvement in the regulation of genetic machinery. The analysis of transient expression levels of transcription factors in response to a certain cell status is a powerful means for investigating cellular dynamics at the biomolecular level. Herein, a DNA-based molecular switch that enables probing of transcription factor DNA binding activity is directly used in living cells. We demonstrate that the DNA nanoswitch allows for dynamic fluorescence imaging of NF-κB and quantification of downstream gene silencing in real time. The present strategy is based on a functional DNA nanodevice that transduces, through a binding-induced conformational change, the recognition of a specific transcription factor into a fluorescent signal. In addition, stochastic optical resolution microscopy, a super-resolution microscopy technique, is used to track the internalization and intracellular trafficking of the DNA nanodevice with high spatial resolution. Overall, it has been shown that a rationally designed DNA nanodevice can be used to achieve rapid, simple, and cost-effective real-time determination of transcription factor binding activity and downstream gene silencing.
Assuntos
DNA , Inativação Gênica , Nanotecnologia , Ligação Proteica , Fatores de Transcrição/metabolismo , Regulação da Expressão Gênica , Humanos , Microscopia Confocal , NF-kappa B/metabolismo , Células PC-3 , Transcrição GênicaRESUMO
One of the most intriguing ways through which nature achieves regulation of biological pathways encompasses the coordination of noncovalent interactions that bring biomolecules to be colocalized in a designated restricted space. Inspired by this mechanism, we have explored the possibility of using antibodies as bivalent biomolecular substrates for the templated assembly of a functional RNA structure. We have developed a biosupramolecular complementation assay by assembling a fluorescent Spinach aptamer, which is a synthetic RNA mimic of the Green Fluorescent Protein, from its split segments. We have employed two antigen-tagged RNA strands that, upon binding to the target antibody, are colocalized in a confined space and can reassemble into the native Spinach conformation, yielding a measurable fluorescence emission as a function of the templating antibody concentration. We have demonstrated the generality of our approach using two different antigen/antibody systems and found that both platforms show high binding affinity, specificity for the target antibody, and enough selectivity to work in crude cellular extracts. This study highlights the potential of biosupramolecular RNA engineering for the development of innovative biomimetic tools for nanobiotechnology and bioanalytical assays.