Label-Free Detection of Unbound Bilirubin and Nitrophenol Explosives in Water by a Mechanosynthesized Dual Functional Zinc Complex: Recognition of Picric Acid in Various Common Organic Media.

High levels of unconjugated bilirubin (UB) in serum lead to asymptomatic and neonatal jaundice and brain dysfunctions. Herein, we have reported the detection of UB at as low as 1 µM in an aqueous alkaline medium using a Zn(II) complex. The specificity of the complex has been validated by the HPLC in the concentration window 6-90 µM, which is rare. The sensory response of the probe at physiological pH against nitro explosives developed it as an instant-acting fluorosensor for picric acid (PA) and 2,4-dinitrophenol (2,4-DNP). Spectroscopic titration provided a binding constant of 4×105  M-1 with PA. The naked eye detection was found to be 15 µM. The solid-state photoluminescent nature of the complex enabled it for PA sensing in the solid phase. Interestingly, the probe remained fluorescent in various volatile and non-volatile organic solvents. As a result, it can also detect PA and 2,4-DNP in a wide range of common organic media. NMR studies revealed the coordination of PA, 2,4-DNP, and UB to the Zn(II) center of the probe, which is responsible for the observed quenching of the probe with the analytes.

Role of reinforcement learning for risk-based robust control of cyber-physical energy systems.

Critical infrastructures such as cyber-physical energy systems (CPS-E) integrate information flow and physical operations that are vulnerable to natural and targeted failures. Safe, secure, and reliable operation and control of CPS-E is critical to ensure societal well-being and economic prosperity. Automated control is key for real-time operations and may be mathematically cast as a sequential decision-making problem under uncertainty. Emergence of data-driven techniques for decision making under uncertainty, such as reinforcement learning (RL), have led to promising advances for addressing sequential decision-making problems for risk-based robust CPS-E control. However, existing research challenges include understanding the applicability of RL methods across diverse CPS-E applications, addressing the effect of risk preferences across multiple RL methods, and development of open-source domain-aware simulation environments for RL experimentation within a CPS-E context. This article systematically analyzes the applicability of four types of RL methods (model-free, model-based, hybrid model-free and model-based, and hierarchical) for risk-based robust CPS-E control. Problem features and solution stability for the RL methods are also discussed. We demonstrate and compare the performance of multiple RL methods under different risk specifications (risk-averse, risk-neutral, and risk-seeking) through the development and application of an open-source simulation environment. Motivating numerical simulation examples include representative single-zone and multizone building control use cases. Finally, six key insights for future research and broader adoption of RL methods are identified, with specific emphasis on problem features, algorithmic explainability, and solution stability.

Affinity Studies of Hemicyanine Derived Water Soluble Colorimetric Probes with Reactive Oxygen/Nitrogen/Sulfur Species.

Peroxynitrite (ONOO- ) is an essential endogenous reactive oxygen species (ROS) generated in mitochondria under various pathological and physiological conditions. An increase in its level in mitochondria is related to numerous diseases. Herein, we report a series of hemicyanine-derived water-soluble colorimetric probes (1-4) and the reactivity of which was studied with various reactive oxygen, nitrogen, and sulfur species. Probes 1-4 are formed by conjugating 1,2,3,3-tetramethyl-3H-indolium iodide and 4-hydroxybenzaldehyde or its derivatives through an alkene linkage formed by the Knoevenagel reaction. Oxidative cleavage of the electron-rich double bond of the conjugated hemicyanine dye revealed a discerning affinity of probe 3 towards peroxynitrite among all reactive oxygen species. The rapid change in color of 3 provides a sensitive and selective method for detecting peroxynitrite with a low detection limit of 180 nM. Notably, the water solubility of the probe displays excellent performance for the selective detection of peroxynitrite among ROS and reactive nitrogen (RNS)/sulfur species (RSS). UV-vis, 1 H NMR, and 13 C NMR spectroscopic data and results from theoretical calculations provide further information on the interaction of peroxynitrite with probe 3.

Enhanced photocatalytic activity of ceria-doped zinc oxide under UV illumination prepared via chemical precipitation.

Transition metal oxide has emerged as one of the most potential candidates for environment remediation by utilizing solar energy through photocatalysis. This study compares the optical characteristics of zinc oxide (ZnO) and ceria-doped zinc oxide (CeZnO) nanoparticles synthesized through a facile chemical precipitation method without using any assistant catalyst. The present work investigates the consequences of ceria (cerium dioxide, CeO2 ) intrusion on the photocatalytic activity of ZnO nanoparticles using methylene blue (MB) as a probe pollutant. The CeZnO showed an increase in photoactivity when compared to ZnO nanoparticles for degradation of MB in an aqueous solution under ultraviolet (UV) irradiance. The resulting heterojunction between ZnO and that of ceria enhances the charge separation efficiency showing a strong correlation between ZnO and CeO2 heterojunction on the charge transfer mechanism across the interface.

Studies on the interaction between oxido/dioxidovanadium(V) compounds and reactive oxygen species: Synthesis, characterization, and photophysical investigation.

Singlet oxygen (1O2) and hypochlorite (OCl-) are two principal non-radical reactive oxygen species (ROS) which, are produced in a number of biochemical processes. In cellular systems, these analytes play various important roles. In this article, we report two mononuclear oxido- and dioxidovanadium(V) compounds 1 and 2 of an intramolecularly hydrogen bonded luminescent zwitterion ligand (HL). Single crystal X-ray diffraction analysis and multinuclear (1H and 51V) NMR spectroscopy provided the identities of 1 and 2 in the solid and solution states, respectively. Both 1 and 2 are water soluble and fluorescent. Fluorescence of the ligand HL is responsible for the fluorescent nature of 1 and 2. Protonation of the hanging amine moiety of the ligand remained unchanged in the vanadium complexes 1 and 2. However, the intramolecular H-bonding is not present in 1 and 2. Hydrophilicity and luminescent nature of the vanadium complexes provided us the opportunity to study the interaction of 1 and 2 with different ROS. Excited state photophysical investigations revealed highly selective instant response of the probes 1 and 2 for singlet oxygen and hypochlorite. Specific response of the dioxidovanadium(V) complex 1 towards singlet oxygen/hypochlorite remained unchanged in presence of other challenging ROS. Spectrofluorimetric titration provided limit of detection around 180 nM for 1O2. 1H NMR and theoretical calculations provided further information on the interactions between vanadium compound and analyte.

Evaluation of the effects of repeated disinfection on medical exam gloves: Part 1. Changes in physical integrity.

COVID-19 has created shortages of personal protective equipment. In resource-constrained situations, limited cycles of disinfection and extended use of gloves is recommended by the U.S. Centers for Disease Control and Prevention to conserve supplies. However, these guidelines are based on limited evidence. In this study, serial cycles of hand hygiene were performed on gloved hands using an ethanol-based hand rub (six and 10 cycles), 0.1% sodium hypochlorite (bleach) solution (10 cycles), or soap and water (10 cycles) on latex and nitrile medical exam gloves from the United States and India. A modified water-leak test evaluated glove integrity after repeated applications of these disinfecting agents. When aggregated, dilute bleach demonstrated the lowest difference between treatment and control arms: -2.5 percentage points (95% CI: -5.3 to 0.3) for nitrile, 0.6 percentage points (95% CI: -2.6 to 3.8) for non-powdered latex. For U.S.-purchased gloves tested with six and 10 applications of ethanol-based hand rub, the mean difference in failure risk between treatment and control gloves was within the prespecified non-inferiority margin of five percentage points or less, though some findings were inconclusive since outside the margin. The aggregated difference in failure risk between treatment and control was 3.5 percentage points (0.6 to 6.4) for soap and water, and 2.3 percentage points (-0.5 to 5.0) and 5.0 percentage points (1.8 to 8.2) for 10 and 6 applications of ethanol-based hand rub, respectively. Most leaks occurred in the interdigital webs (35%) and on the fingers (34%). This indicates that some combinations of glove types and disinfection methods may allow for extended use. Ten applications of dilute bleach solution had the least impact on glove integrity. However, the majority of glove and exposure combinations were inconclusive. Additional testing of specific glove and disinfectant combinations may inform future strategies to guide extended use during glove shortages. Additional considerations, not evaluated here, include duration of use, disinfectant chemical permeation, and the effects of hand temperature, movement, and manipulation of instruments on glove integrity.

Evaluation of the effects of repeated disinfection on medical exam gloves: Part 2. Changes in mechanical properties.

Many healthcare professionals have been forced, under acute shortages, to extend medical exam gloves beyond their intended single use. Despite limited available literature, the CDC proposed a set of guidelines for repeated exam gloves use, indicating a maximum number of treatments for three widely available disinfectants. This study examines how these treatments affect the mechanical properties of latex and nitrile gloves. Furthermore, an acceptability threshold is proposed for changes in tensile property, specifically elastic modulus, as an indication of degradation. This proposed criterion was also applied to similar studies available in the literature to determine applicability and aid in recommendation development. Three different latex glove brands and three nitrile brands were exposed to repeated treatments of an alcohol-based hand rub, diluted bleach, or soap and water. Tensile tests of samples cut from untreated and treated gloves were performed to assess the change in elastic modulus induced by each treatment. The findings suggest that latex gloves performed well within the CDC recommended guidelines of six repeated treatments for an ethanol-based hand rub and 10 repeated treatments of either dilute bleach or soap and water. Nitrile exam gloves, on the other hand, showed significant changes in elastic modulus, with more inconclusive results among brands. This was especially true for treatment with dilute bleach and soap and water. Further research is needed to investigate the effects of disinfection products on the mechanical integrity of nitrile exam gloves. The results support the use of five repeated treatments of ethanol-based hand rub for nitrile exam gloves, a lower threshold than currently recommended by the CDC. This research also supports that the CDC recommendation of 10 repeated treatment with soap and water is appropriate for latex exam gloves, but not for nitrile exam gloves. Occupational safety and health professionals involved in the selection of disposable exam gloves for infection control should consider the compatibility of the glove polymer type with available disinfectants, especially if extended use with repeated disinfection becomes necessary.

Applying heat and humidity using stove boiled water for decontamination of N95 respirators in low resource settings.

Global shortages of N95 respirators have led to an urgent need of N95 decontamination and reuse methods that are scientifically validated and available world-wide. Although several large scale decontamination methods have been proposed (hydrogen peroxide vapor, UV-C); many of them are not applicable in remote and low-resource settings. Heat with humidity has been demonstrated as a promising decontamination approach, but care must be taken when implementing this method at a grassroots level. Here we present a simple, scalable method to provide controlled humidity and temperature for individual N95 respirators which is easily applicable in low-resource settings. N95 respirators were subjected to moist heat (>50% relative humidity, 65-80°C temperature) for over 30 minutes by placing them in a sealed container immersed in water that had been brought to a rolling boil and removed from heat, and then allowing the containers to sit for over 45 minutes. Filtration efficiency of 0.3-4.99 µm incense particles remained above 97% after 5 treatment cycles across all particle size sub-ranges. This method was then repeated at a higher ambient temperature and humidity in Mumbai, using standard utensils commonly found in South Asia. Similar temperature and humidity profiles were achieved with no degradation in filtration efficiencies after 6 cycles. Higher temperatures (>70°C) and longer treatment times (>40 minutes) were obtained by insulating the outer vessel. We also showed that the same method can be applied for the decontamination of surgical masks. This simple yet reliable method can be performed even without electricity access using any heat source to boil water, from open-flame stoves to solar heating, and provides a low-cost route for N95 decontamination globally applicable in resource-constrained settings.

Doping controlled Fano resonance in bilayer 1T'-ReS2: Raman experiments and first-principles theoretical analysis.

In the bilayer ReS2 channel of a field-effect transistor (FET), we demonstrate using Raman spectroscopy that electron doping (n) results in softening of frequency and broadening of linewidth for the in-plane vibrational modes, leaving the out-of-plane vibrational modes unaffected. The largest change is observed for the in-plane Raman mode at ∼151 cm-1, which also shows doping induced Fano resonance with the Fano parameter 1/q = -0.17 at a doping concentration of ∼3.7 × 1013 cm-2. A quantitative understanding of our results is provided by first-principles density functional theory (DFT), showing that the electron-phonon coupling (EPC) of in-plane modes is stronger than that of out-of-plane modes, and its variation with doping is independent of the layer stacking. The origin of large EPC is traced to 1T to 1T' structural phase transition of ReS2 involving in-plane displacement of atoms whose instability is driven by the nested Fermi surface of the 1T structure. Results are compared with those of the isostructural trilayer ReSe2.

Recharging and rejuvenation of decontaminated N95 masks.

N95 respirators comprise a critical part of the personal protective equipment used by frontline health-care workers and are typically meant for one-time usage. However, the recent COVID-19 pandemic has resulted in a serious shortage of these masks leading to a worldwide effort to develop decontamination and re-use procedures. A major factor contributing to the filtration efficiency of N95 masks is the presence of an intermediate layer of charged polypropylene electret fibers that trap particles through electrostatic or electrophoretic effects. This charge can degrade when the mask is used. Moreover, simple decontamination procedures (e.g., use of alcohol) can degrade any remaining charge from the polypropylene, thus severely impacting the filtration efficiency post-decontamination. In this report, we summarize our results on the development of a simple laboratory setup allowing measurement of charge and filtration efficiency in N95 masks. In particular, we propose and show that it is possible to recharge the masks post-decontamination and recover filtration efficiency.

Large scale validation of a new non-invasive and non-contact bilirubinometer in neonates with risk factors.

The study was aimed to evaluate the performance of a newly developed non-invasive and non-contact bilirubin measurement device (AJO-Neo) as an alternative to the conventional invasive biochemical method of total serum bilirubin (TSB) estimation in preterm and term neonates suffering from hyperbilirubinemia associated with risk factors, and/or undergoing phototherapy. The safety and efficacy of the device were assessed in 1968 neonates with gestational ages ranging from 28 to 41 weeks and suffering from incidences of hyperbilirubinemia. Linear regression analysis showed a good correlation between AJO-Neo and the conventional method of TSB (Pearson's coefficient, r = 0.79). The small bias (0.27 mg/dL) and limits of agreements (- 3.44 to 3.99 mg/dL) were within the range of clinical acceptance. The device was also precise in the measurement of bilirubin levels in all subgroups of the study. The receiver operator curve (ROC), that takes account of both sensitivity and specificity of a device showed high efficacy of the device (area under the curve, AUC = 0.83) in the detection of bilirubin. While monitoring the bilirubin level during phototherapy, the device indicated promising results showing good agreement with TSB. Specificities and sensitivities of the device indicated a much higher accuracy in neonates with associated risk factors for hyperbilirubinemia. Hence, the newly developed device (AJO-Neo) is reliable in measuring bilirubin level in preterm, and term neonates irrespective of gestational or postnatal age, sex, risk factors, feeding behavior or skin color.

Growth, structural and optical characterization of wurtzite GaP nanowires.

Bulk gallium phosphide (GaP) crystallizes in the zinc-blende (ZB) structure and has an indirect bandgap. However, GaP nanowires (NWs) can be synthesized in the wurtzite (WZ) phase as well. The contradictory theoretical predictions and experimental reports on the band structure of WZ GaP suggest a direct or a pseudo-direct bandgap. There are only a few reports of the growth and luminescence from WZ and ZB GaP NWs. We first present a comprehensive study of the gold-catalyzed growth of GaP NWs via metalorganic vapor phase epitaxy on various crystalline and amorphous substrates. We optimized the growth parameters like temperature, pressure and reactant flow rates to grow WZ GaP NWs with minimal taper. These wires were characterized using electron microscopy, x-ray diffraction, Raman scattering and photoluminescence spectroscopy. The luminescence studies of bare GaP NWs and GaP/AlGaP core-shell heterostructures with WZ- and ZB-phase GaP cores suggest that the WZ-phase GaP has a pseudo-direct bandgap with weak near-band-edge luminescence intensity.

A Novel Whole Spectrum-Based Non-Invasive Screening Device for Neonatal Hyperbilirubinemia.

OBJECTIVE: Careful screening of bilirubin level in newborns is mandatory as per American Academy of Pediatrics (2004), to reduce incidents of kernicterus and acute bilirubin encephalopathy. Although, invasive capillary collection of blood and subsequent biochemical test is considered a gold standard for jaundice detection in neonates, transcutaneous bilirubin measurement using various non-invasive instruments is also used sporadically across the globe. The major aim of this study was to develop a non-invasive spectrometry-based technique for measurement of neonatal bilirubin level as an alternative of total serum bilirubin (TSB) test without limitations of other available bilirubinometers. METHODS: The instrument comprises of a light source and a spectroscopic detector. A light beam from source incident on the neonatal nail plate through optical fibers. The retro reflected light is acquired using the detector. An indigenously developed software is used to acquire and analyze the optical signal and to calculate the bilirubin value. The instrument was calibrated and validated in reference to TSB on 1033 subjects. MAJOR RESULTS: The result (r = 0.95 and P < 0.001) indicates a strong correlation between the bilirubin value obtained from our method and TSB. Time variant analysis of the subjects undergoing phototherapy provided a good correlation (r = 0.98). The repeatability test result shows the mean coefficient of variation is less than 5.0%. CONCLUSIONS: The indigenously developed non-invasive technique successfully detects the bilirubin level in newborns under various physiological conditions with high accuracy and precision.

Facile synthesis of WS2 nanotubes by sulfurization of tungsten thin films: formation mechanism, and structural and optical properties.

While 2D layers of WS2 have been extensively studied, there are very few investigations of WS2 nanotubes. These have usually been grown via a 2-step process involving a WO3-x intermediate. We report a simple process for the synthesis of WS2 nanotubes via the sulfurization of tungsten films under appropriate conditions and present details of their structural and optical properties that help elucidate the formation mechanism. Electron-beam evaporated films of tungsten are sulfurized under flowing N2 gas at 950-1000 °C temperature under atmospheric pressure to obtain WS2 nanotubes. High-resolution scanning and transmission electron microscopy studies show that 2D WS2 flakes curl up and wrap around themselves to form nanotubes. Interlayer spacings in both 'a' and 'c' directions are slightly smaller than the corresponding values in bulk and thin film WS2. Micro-photoluminescence and micro-transmission studies show a resonance that seems intrinsic to the WS2 nanotubes since it cannot be related to the known optical characteristics of WS2 flakes.

Understanding the effect of nanowire orientation on time evolution of Raman spectra from laser irradiated InAs nanowire surface.

We investigate differences observed in the time evolution of Raman spectra for differently oriented (in plane) InAs nanowires (NWs), using polarized Raman spectroscopy. Specially designed polarized Raman spectroscopy experiments elucidate that laser irradiation leads to the formation of an oriented crystalline oxide film on the InAs NW surface. Both the formation of oriented crystalline oxides and Raman selection rules leading to the presence/absence of oxide peaks in the unpolarized Raman spectra are uncommon occurrences and can lead to incorrect interpretations of the oxidation process, if not looked into carefully. Further, the specially designed heating and cooling experiments for a mixed phase (wurtzite + zinc blende) InAs NW revealed the formation of specific allotropes of elemental As, i.e. gray-As (rhombohedral) and black-As (orthorhombic: metastable) at low (700-950 K) and high simulated temperatures (1000-1300 K) on the InAs NW surface, respectively. Both have high electrical conductivity due to a layered structure and control over the growth of only a few layers using laser irradiation envisages properties similar to graphene. This kind of surface of InAs NWs has the potential for novel device applications, where a semiconductor-insulator-metal heterostructure is required.

Probing in-plane anisotropy in few-layer ReS2 using low frequency noise measurement.

ReS2, a layered two-dimensional material popular for its in-plane anisotropic properties, is emerging as one of the potential candidates for flexible electronics and ultrafast optical applications. It is an n-type semiconducting material having a layer independent bandgap of 1.55 eV. In this paper we have characterized the intrinsic electronic noise level of few-layer ReS2 for the first time. Few-layer ReS2 field effect transistor devices show a 1/f nature of noise for frequency ranging over three orders of magnitude. We have also observed that not only the electrical response of the material is anisotropic; the noise level is also dependent on direction. In fact the noise is found to be more sensitive towards the anisotropy. This fact has been explained by evoking the theory where the Hooge parameter is not a constant quantity, but has a distinct power law dependence on mobility along the two-axes direction. The anisotropy in 1/f noise measurement will pave the way to quantify the anisotropic nature of two-dimensional (2D) materials, which will be helpful for the design of low-noise transistors in future.

In vitro drug release and in vivo safety of vitamin E and cysteamine loaded contact lenses.

Cystinosis is an orphan disease caused by a genetic mutation that leads to deposition of cystine crystals in many organs including cornea. Ophthalmic manifestation of the disease can be treated with hourly instillation of cysteamine eye drops. The hourly eye drop instillation is tedious to the patients leading to poor compliance and additionally, significant degradation of the drug occurs within one week of opening the bottle, which further complicates this delivery approach. This paper focuses on designing a contact lens to treat the disease with improved efficacy compared to eye drops, and also exploring safety of the drug eluding contact lens in an animal model. Our goal is to design a lens that is safe and that can deliver a daily therapeutic dose of cysteamine to the cornea while retaining drug stability. We show that cysteamine diffuses out rapidly from all lenses due to its small size. Vitamin E incorporation increases the release duration of both ACUVUE®OASYS® and ACUVUE® TruEyeTM but the effect is more pronounced in TruEyeTM likely due to the low solubility of vitamin E in the lens matrix and higher aspect ratio of the barriers. The barriers are not effective in hydrogel lenses, which along with the high aspect ratio in silicone hydrogels suggests that barriers could be forming at the interface of the silicone and hydrogel phases. The presence of vitamin E has an additional beneficial effect of reduction in the oxidation rates, likely due to a transport barrier between the oxygen diffusing through the silicone channels and drug located in the hydrogel phase. Based on this study, both Acuvue®OASYS® and ACUVUE® TruEyeTM can be loaded with vitamin E to design a cysteamine eluting contact lenses for effective therapy of cystinosis. The lenses must be worn for about 4-5 hr. each day, which is less than the typical duration of daily-wear. The vitamin E and cysteamine loaded lenses did not exhibit any toxicity in a rabbit model over a period of 7-days.

High Dose Ofloxacin-induced Bimodal Hallucinations in a 4 Years Old Child.

Ofloxacin is a commonly used quinolone antibiotic both in adults as well as children. It is generally safe and well tolerated. Rarely, neurological and psychiatric adverse reactions are reported to occur with ofloxacin. We report a case of a child who developed delirium after ofloxacin treatment, that resolved after medication discontinuation and treatment with low dose olanzapine.

Highly Anisotropic in-Plane Excitons in Atomically Thin and Bulklike 1T'-ReSe2.

Atomically thin materials such as graphene or MoS2 are of high in-plane symmetry. Crystals with reduced symmetry hold the promise for novel optoelectronic devices based on their anisotropy in current flow or light polarization. Here, we present polarization-resolved optical transmission and photoluminescence spectroscopy of excitons in 1T'-ReSe2. On reducing the crystal thickness from bulk to a monolayer, we observe a strong blue shift of the optical band gap from 1.37 to 1.50 eV. The excitons are strongly polarized with dipole vectors along different crystal directions, which persist from bulk down to monolayer thickness. The experimental results are well reproduced by ab initio calculations based on the GW-BSE approach within LDA+GdW approximation. The excitons have high binding energies of 860 meV for the monolayer and 120 meV for bulk. They are strongly confined within a single layer even for the bulk crystal. In addition, we find in our calculations a direct band gap in 1T'-ReSe2 regardless of crystal thickness, indicating weak interlayer coupling effects on the band gap characteristics. Our results pave the way for polarization-sensitive applications, such as optical logic circuits operating in the infrared spectral region.