Evaporative Drying Induced Self-Assembly of Epicuticular Wax: A Biomimetic Approach in Tuning Surface Roughness.

Epicuticular wax is an example of a naturally created functional material that forms a layer on the outermost surface of plants with the objective to protect them from adverse environmental conditions, such as UV-solar radiation, uncontrolled water loss, microbial attacks, and so forth. Their functionalities are often attributed to the chemical composition of the wax as well as the physical structuration formed by the wax crystals on the surface. With this work, we present a simple, one-step biomimetic approach to replicate similar surface structures, on model substrate, using wax extracted from Euphorbia Cerifera (Candelilla wax). First, we describe formation of structured wax due to self-assembly induced by evaporative drying on quartz plates. Subsequently, we highlight the fundamental physical parameters required to tune the surface morphology. Our experiments reveal that it is possible to achieve considerably diverse surface morphologies depending on the solvent properties and deposition temperature. This diversity is due to the kinetics of recrystallization of wax during evaporation of solvent which, in turn, is primarily driven by the solubility of wax as well as evaporation rate of the solvent. Thus, the final morphology that we obtain is an interplay between recrystallization kinetics and solvent evaporation. Additionally, the degree of crystallinity of the structured films could also be tuned by solvent polarity. Surprisingly, X-ray diffraction indicates that the crystalline structure at the molecular level remains similar to that of bulk Candelilla wax. Our results provide fundamental insights into the replication of epicuticular wax films and identification of tuning parameters to obtain different surface morphologies with the same wax material for potential bioinspired multifunctional coatings in cosmetic applications.

Synthetic styrene-based bioinspired model of the [FeFe]-hydrogenase active site for electrocatalytic hydrogen evolution.

Integration of molecular catalysts inside polymeric scaffolds has gained substantial attention over the past decade, as it provides a path towards generating systems with enhanced stability as well as enzyme-like morphologies and properties. In the context of solar fuels research and chemical energy conversion, this approach has been found to improve both rates and energy efficiencies of a range of catalytic reactions. However, system performance still needs to be improved to reach technologically relevant currents and stability, parameters that are heavily influenced by the nature of the incorporated molecular catalyst. Here, we have focused on the integration of a biomimetic {Fe2(µ-adt)(CO)6} (-CH2NHCH2S-, azadithiolate or adt2-) based active site ("[2Fe2S]adt"), inspired by the catalytic cofactor of [FeFe] hydrogenases, within a synthetic polymeric scaffold using free radical polymerization. The resulting metallopolymers [2Fe2S]adtk[DMAEMA]l[PyBMA]m (DMAEMA = dimethylaminoethyl methacrylate as water soluble monomer; PyBMA = 4-(pyren-1-yl)-butyl methacrylate as hydrophobic anchor for heterogenization) were found to be active for electrochemical H2 production in neutral aqueous media. The pyrene content was varied to optimize durability and activity. Following immobilization on multiwalled carbon nanotubes (MWNT) the most active metallopolymer, containing ∼2.3 mol% of PyBMA, could reach a turnover number for hydrogen production (TONH2) of ∼0.4 ×105 over 20 hours of electrolysis at an overpotential of 0.49 V, two orders of magnitude higher than the isolated catalyst counterpart. The study provides a synthetic methodology for incorporating catalytic units featuring second coordination sphere functional groups, and highlights the benefit of the confinement within the polymer matrix for catalytic performance.

Water-borne synthesis of multi-responsive and biodegradable chitosan-crosslinked microgels: Towards self-assembled films with adaptable properties.

The present study aims in the synthesis of new biodegradable stimuli-responsive microgels with controllable microstructure and with the ability to form cohesive films. Such self-assembled films by water evaporation at ambient conditions without any chemicals but just physical entanglements between soft colloid shell, present adaptable mechanical, adhesive and mechano-electrical properties. For that, oligo(ethylene glycol)-based stimuli-responsive microgels have been synthesized using biodegradable chitosan-methacrylates (Chi-MAs) with different degree of substitution (DS) as unique cross-linking agents by precipitation polymerization in water, for the first time. In all the cases, the microgels present thermo-responsiveness with hysteresis between heating and cooling cycles. However, this behavior is tuned and controlled using different types and amounts of Chi-MAs. In addition, the type of Chi-MA used can control microgels' microstructure as well as their enzymatic biodegradation. In addition, spontaneous cohesive films formation from colloidal aqueous dispersion with sol-gel transition is demonstrated. The films present tunable mechanical and adhesive properties through microgels' microstructure and enhanced mechano-electrical properties triggered by simple finger pressure (10-15 N). As self-supported films are able to encapsulate different types of active molecules, this study paves the way for suitable self-assembled microgel films for skincare applications as transdermal delivery systems.

Soft Self-Assembled Mechanoelectrical Transducer Films from Conductive Microgel Waterborne Dispersions.

The present study aims in the developing of new soft transducers based on sophisticated stimuli-responsive microgels that exhibit spontaneous self-assembly forming cohesive films with conductive and mechanoelectrical properties. For that, oligo(ethylene glycol)-based stimuli-responsive microgels have been synthesized using bio-inspired catechol cross-linkers by one-step batch precipitation polymerization in aqueous media. Then, 3,4-ethylene dioxyyhiophene (EDOT) has been directly polymerized onto stimuli-responsive microgels using catechol groups as the unique dopant. PEDOT location is dependent on the cross-linking density of microgel particles and EDOT amount used. Moreover, the spontaneous cohesive film formation ability of the waterborne dispersion after evaporation at soft application temperature is demonstrated. The films obtained present conductivity and enhanced mechanoelectrical properties triggered by simple finger compression. Both properties are function of the cross-linking density of the microgel seed particles and PEDOT amount incorporated. In addition, to obtain maximum electrical potential generated and the possibility to amplify it, several films in series were demonstrated to be efficient. The present material can be a potential candidate for biomedical, cosmetic, and bioelectronic applications.

Electrode-modified block copoly-ionic liquid boosting the CO2 reduction toward CO in water-based media.

Coupling polymer and ionic liquids with electrodes for catalysis is a promising tool for optimization of electrocatalytic CO2 reduction reaction (CO2RR). Here, block copolymer ionic liquids BCPILs were synthesized via controlled radical polymerization and nucleophilic post-substitution to introduce imidazole moieties. We show that, thanks to these PIL functionalities, the BCPIL/Re@HPC/GDL electrode can keep the selectivity toward CO when a higher amount of water is present in the electrolyte than the raw Re@HPC/GDL system. Our results help to understand the development of solid-state ionic liquids for enhanced CO2RR in water-based electrolyte.

Selenium-decorated biocompatible honeycomb films with redox-switchable surface for controlling cell adhesion/detachment.

HYPOTHESIS: Selenium (Se)-containing compound is sensitive to redox stimulation, showing hydrophobic-hydrophilic reversible transition. Introduction of such compound into honeycomb film could confer on it redox-switchable surface wettability, which is expected to control cell adhesion/detachment behavior. EXPERIMENTS: Didodecyl selenide was designed and mixed with polystyrene to prepare honeycomb films using "breath figure" method. The film microstructures were characterized by scanning electron microscope and atomic force microscopy, and the arrangement of Se atoms in honeycomb film was determined by X-ray photoelectron spectroscopy and energy dispersive spectrometry. The variation of film wettability upon the alternating stimulation of H2O2 and Vc was examined. Then the cell adhesion, proliferation, and controlled detachment on honeycomb films were conducted. FINDINGS: The introduction of didodecyl selenide helps to form ordered honeycomb film, and Se atoms were found to located on the bottom, pore walls, and top surface of the film. The presence of didodecyl selenide not only greatly improves film biocompatibility by enhancing cell thioredoxin reductase activity, but also imparts the film with H2O2-/vitamin C-regulated tunable wettability that controls cell adhesion and detachment. H2O2 treatment produces a hydrophilic surface for cell adhesion and proliferation, whereas the addition of vitamin C generates hydrophobic surfaces and allows cells to detach while remaining alive with high activity.

Photoswitchable assembly of long-lived azobenzenes in water using visible light.

HYPOTHESIS: Switchable assemblies relevant for bio-applications may be accessed from water-soluble tetra-ortho-substituted azobenzenes that reversibly self-assemble and form complexes with ß-cyclodextrin under visible light. EXPERIMENTS: Two azobenzenes bearing either four fluorines or two chlorines and two fluorines in the ortho positions were synthesised with short poly(ethylene oxide) tails for water solubility. Photophysical properties were determined by UV-vis and 1H NMR spectroscopies, complexation with ß-cyclodextrin was assessed by 1H NMR spectroscopy, and self-assembly in water was investigated by static and dynamic light scattering. FINDINGS: Both molecules underwent trans-cis isomerization at 530 nm and cis-trans isomerization at 415 nm, with the cis forms exhibiting thermal half-lives > 300 days at room temperature. Both molecules formed inclusion complexes with ß-cyclodextrin in water, with cis-4F-AZO-PEO binding 3-fold stronger than trans, and 2Cl2F-AZO-PEO binding significantly weaker. Self-assembly of pure 2Cl2F-AZO-PEO in water showed an open association process regardless of configuration, while 4F-AZO-PEO showed an open association process for cis (Nagg increasing from 30 to 1000) but a closed association process for trans (Nagg stable at âˆ¼ 170). Aqueous solutions of 2Cl2F-AZO-PEO showed cloud points close to 45 °C, while the 4F-AZO-PEO isomers presented well-separated cloud points allowing reversible and all-visible transition between clear and turbid states at room temperature.

Non-Covalent Integration of a [FeFe]-Hydrogenase Mimic to Multiwalled Carbon Nanotubes for Electrocatalytic Hydrogen Evolution.

Surface integration of molecular catalysts inspired from the active sites of hydrogenase enzymes represents a promising route towards developing noble metal-free and sustainable technologies for H2 production. Efficient and stable catalyst anchoring is a key aspect to enable this approach. Herein, we report the preparation and electrochemical characterization of an original diironhexacarbonyl complex including two pyrene groups per catalytic unit in order to allow for its smooth integration, through π-interactions, onto multiwalled carbon nanotube-based electrodes. In this configuration, the grafted catalyst could reach turnover numbers for H2 production (TONH2 ) of up to 4±2×103 within 20 h of bulk electrolysis, operating at neutral pH. Post operando analysis of catalyst functionalized electrodes revealed the degradation of the catalytic unit occurred via loss of the iron carbonyl units, while the anchoring groups and most part of the ligand remained attached onto multiwalled carbon nanotubes.

Heterogenised Molecular Catalysts for Sustainable Electrochemical CO2 Reduction.

There has been a rapid rise in interest regarding the advantages of support materials to protect and immobilise molecular catalysts for the carbon dioxide reduction reaction (CO2 RR) in order to overcome the weaknesses of many well-known catalysts in terms of their stability and selectivity. In this Review, the state of the art of different catalyst-support systems for the CO2 RR is discussed with the intention of leading towards standard benchmarking for comparison of such systems across the most relevant supports and immobilisation strategies, taking into account these multiple pertinent metrics, and also enabling clearer consideration of the necessary steps for further progress. The most promising support systems are described, along with a final note on the need for developing more advanced experimental and computational techniques to aid the rational design principles that are prerequisite to prospective industrial upscaling.

Spontaneously Self-Assembled Microgel Film as Co-Delivery System for Skincare Applications.

Nowadays, the design of innovative delivery systems is driving new product developments in the field of skincare. In this regard, serving as potential candidates for on-demand drug delivery and fulfilling advanced mechanical and optical properties together with surface protection, spontaneously self-assembled microgel films can be proposed as ideal smart skincare systems. Currently, the high encapsulation of more than one drug simultaneously in a film is a very challenging task. Herein, different ratios (1:1, 3:1, 9:1) of different mixtures of hydrophilic/hydrophobic UVA/UVB-absorbers working together in synergy and used for skin protection were encapsulated efficiently into spontaneously self-assembled microgel films. In addition, in vitro release profiles show a controlled release of the different active molecules regulated by the pH and temperature of the medium. The analysis of the release mechanisms by the Peppas-Sahlin model indicated a superposition of diffusion-controlled and swelling-controlled releases. Finally, the distribution of active molecule mixtures into the film was studied by confocal Raman microscopy imaging corroborating the release profiles obtained.

CO2-Triggered ON/OFF Wettability Switching on Bioinspired Polylactic Acid Porous Films for Controllable Bioadhesion.

Bioinspired honeycomb-like porous films with switchable properties have drawn much attention recently owing to their potential application in scenarios in which the conversion between two opposite properties is required. Herein, the CO2-gas-triggered ON/OFF switching wettability of biocompatible polylactic acid (PLA) honeycomb porous films is fabricated. Highly ordered porous films with diameters between 2.0 and 2.8 µm are separately prepared from complexes of nonresponsive PLA and a CO2-sensitive melamine derivative [N2,N4,N6-tris(3-(dimethylamino)propyl)-1,3,5-triazine-2,4,6-triamine, MET] via the breath figure method. The hydrophilic CO2-sensitive groups can be precisely arranged in the pore's inner surface and/or top surface of the films by simply changing the PLA/MET ratio. The sensitive groups in the pore's inner surface act as a switch triggered by CO2 gas controlling water to enter the pores or not, thus resulting in ON/OFF switching wettability. The largest response of the water contact angle of honeycomb films reaches 35°, from 100 to 65°, leading to an obvious hydrophobic-hydrophilic conversion. The improved surface wettability enhances the interaction between the cell and honeycomb film surface, thus resulting in a better cell attachment. Such smart properties accompanying the biocompatible polymer and biological gas trigger facilitate possible biomedical and bioengineering applications in the future for these films.

Microgels self-assembly at liquid/liquid interface as stabilizers of emulsion: Past, present & future.

The most recent developments on Pickering emulsions deal with the design of responsive emulsions able to undergo fast destabilization under the effect of an external stimulus. In this scenario, soft colloidal particles like microgels are considered novel class suitable emulsifiers. Microgels particles self-assemblies are highly deformable at interfaces covering higher surfaces than hard particles and their interfacial behavior strongly depends on external-stimuli. Microgels are very diverse owing to the large variety of them from the point of view of possible combinations of stimuli-responsiveness and different microstructures (crosslinking density and distribution). Herein, we illustrate the use of different types of responsive microgels not only from a structural point of view but also even from physical one. For that, the effect of different microgels parameters such as internal structure and charge density on mechanical properties of the interface will be discussed.

Microstructure-driven self-assembly and rheological properties of multi-responsive soft microgel suspensions.

HYPOTHESES: The deformation and swelling ability of microgels is influenced by the crosslinking distribution. Varying microgels microstructure is expected to obtain suspensions with different flow behavior and thereby, different rheological properties. EXPERIMENTS: Different multi-responsive microgels were synthesized using two different crosslinkers and varying their amounts: N,N-methylene bis-acrylamide (MBA) and oligo(ethylene glycol) diacrylate (OEGDA). The rheological results were obtained by zero-shear viscosity and long-time creep measurements on concentrated microgel suspensions Microgel microstructure was analyzed by 1H nuclear magnetic resonance transverse relaxation measurements. FINDINGS: At a constant crosslinking rate, we show that the viscosity of OEGDA-crosslinked microgels diverges at a higher concentration than MBA ones, suggesting a looser shell and less restricted dangling chains at the periphery for the later. By scaling with the effective volume fraction, the viscosity curves of the different microgel suspensions reduce into a single curve and closely follow hard sphere models up to ϕeff < 0.45. The results from creep tests revealed a much higher yield stress for MBA-crosslinked microgels, strengthening the hypothesis of a looser shell for the later. Finally, transverse relaxation (T2) NMR measurements demonstrated that, although all microgels exhibit a core-shell microstructure, MBA samples present a less crosslinked shell corroborating with the rheological results.

Bio-Inspired Silica Films Combining Block Copolymers Self-Assembly and Soft Chemistry: Paving the Way toward Artificial Exosqueleton of Seawater Diatoms.

This review is in line with the principles of bio-inspiration and biomimicry in order to envisage a softer and more environmentally friendly chemistry. Here, the source of inspiration is a microalga from the oceans with the ability to build an exoskeleton of silica under ambient conditions. Following this model, this review is interested in different ways of creating porous silica films with a hierarchical porosity similar to diatoms. For this purpose, polymeric/hybrid/inorganic films structured in honeycomb using the breath figure method are reported. This versatile and easy to implement method based on the principle of rapid evaporation of a solvent in a humid atmosphere is widely used in the formation of structured films with micron-sized pores. In addition to this, the self-assembly of copolymer at the nanoscale can be addressed to obtain a hierarchically structured film. Following this structuration step, the degradation of a sacrificial block is then described from the most energy-intensive to soft process, allowing an added nanoporosity to the micron porosity of the BF method. Finally, hierarchical porous silica films are described using the sol-gel process, which is known as a soft chemistry process.

When a pH-triggered nanopatterned shape transition drives the wettability of a hierarchically self-organized film: A bio-inspired effect of "sea Anemone".

HYPOTHESIS: Hierarchically structured surfaces including sensitive materials presents the advantage to exalt wettability variation due to the combination of micro structure effect directed by Cassie Baxter and/or Wenzel behaviour which is tuned by the surface energy variation of sensitive polymer films. EXPERIMENTS: Herein is reported the synthesis and the hierarchical structuration of a pH sensitive diblock copolymer P(S-stat-MMA)-b-P4VP with a pH-sensitive Poly 4-vinylpyridine P4VP block. Applying the Breath Figure method casting (minute time scale process), this diblock copolymer allows to obtain a micro porous honeycomb film while a wall nano-structuration due to self-assembly of diblock copolymer is observed. FINDINGS: The pH-triggered wettability is studied and correlated with the morphology evolution of P4VP nano-domains investigated by AFM in a liquid cell. Indeed, a nano-dots to nano-rings/donuts transition is highlighted when decreasing the pH below the pKa of the P4VP. This nano "sea Anemone" shape transition induces the macroscopic changes of the wettability of a hierarchically self-organized honeycomb film, explained by the protonation of P4VP chains inducing electrostatic repulsion and then hydrophilic surface.

Immobilization of a Molecular Re Complex on MOF-derived Hierarchical Porous Carbon for CO2 Electroreduction in Water/Ionic Liquid Electrolyte.

The development of molecular catalysts for CO2 electroreduction within electrolyzers requests their immobilization on the electrodes. While a variety of methods have been explored for the heterogenization of homogeneous complexes, a novel approach using a hierarchical porous carbon material, derived from a metal-organic framework, is reported as a support for the well-known molecular catalyst [Re(bpy)(CO)3 Cl] (bpy=2,2'-bipyridine). This cathodic hybrid material, named Re@HPC (HPC=hierarchical porous carbon), has been tested for CO2 electroreduction using a mixture of an ionic liquid (1-ethyl-3-methylimidazolium tetrafluoroborate, EMIM) and water as the electrolyte. Interestingly, it catalyzes the conversion of CO2 into a mixture of carbon monoxide and formic acid, with a selectivity that depends on the applied potential. The present study thus reveals that Re@HPC is a remarkable catalyst, enjoying excellent activity (turnover numbers for CO2 reduction of 7835 after 2 h at -1.95 V vs. Fc/Fc+ with a current density of 6 mA cm-2 ) and good stability. These results emphasize the advantages of integrating molecular catalysts onto such porous carbon materials for developing novel, stable and efficient, catalysts for CO2 reduction.

Microwave-Assisted Ultrafast RAFT Miniemulsion Polymerization of Biobased Terpenoid Acrylates.

There is a growing preference to move away from traditional petrochemical-based polymers toward biobased alternatives. Here, we report the microwave-assisted RAFT polymerization of several terpenoid acrylates (tetrahydrogeraniol, cyclademol, nopol, and citronellol). These biobased monomers give polymers with a broad range of glass transition temperatures and are excellent candidates to substitute oil-based (meth)acrylates in applications such as coatings and adhesives. First, the process was studied in miniemulsion, finding that all terpenoid acrylates showed a substantial increase in both polymerization rate and reaction control when microwave irradiation was applied. These observations were attributed to nonthermal microwave effects, namely, to changes in the kinetic coefficients under irradiation. The reactions were also carried out in solution, where an amplified nonthermal microwave effect was observed. The results indicate that nonthermal microwave effects allow RAFT polymerization of these terpenoid acrylates to proceed with both improved control and at higher polymerization rates compared to using conventional heating.

A nanopatterned dual reactive surface driven by block copolymer self-assembly.

Herein, we report the selective functionalization of nano-domains obtained by the self-assembly of a polystyrene-block-poly(vinyl benzyl azide) PS-b-PVBN3 copolymer synthesized in three steps. First, a polystyrene macro-initiator was synthesized, and then extended with vinyl benzyl chloride by nitroxide mediated polymerization to form polystyrene-block-poly(vinyl benzyl chloride) PS-b-PVBC. Nucleophilic substitution of vinyl benzyl chloride into a vinyl benzyl azide moiety is finally performed to obtain PS-b-PVBN3 which self-assembled into nano-domains of vinyl benzyl azide PVBN3. Click chemistry was then used to bind functional gold nanoparticles and poly(N-isopropylacrylamide) (PNIPAM) on PVBN3 domains due to the specific anchoring at the surface of the nanopatterned film. Atomic force microscopy (AFM) was used to observe the block copolymer self-assembly and the alignment of the gold nanoparticles at the surface of the PVBN3 nanodomains. Thorough X-ray photoelectron spectroscopy (XPS) analysis of the functional film showed evidence of the sequential grafting of nanoparticles and PNIPAM. The hybrid surface expresses thermo-responsive properties and serves as a pattern to perfectly align and control the assembly of inorganic particles at the nanoscale.

Core@Corona Functional Nanoparticle-Driven Rod-Coil Diblock Copolymer Self-Assembly.

Herein, a novel strategy to overcome the influence of π-π stacking on the rod-coil copolymer organization is reported. A diblock copolymer poly(3-hexylthiophene)-block-poly(ethylene glycol methyl ether methacrylate) (P3HT-b-PEGMA) was synthesized by the Huisgen cycloaddition, so-called "click chemistry", combining the PEGMA and P3HT blocks synthesized by atom transfer radical polymerization and Kumada catalyst transfer polymerization, respectively. Using a dip-coating process, we controlled the original film organization of the diblock copolymer by the crystallization of the P3HT block via π-π stacking. The morphology of the P3HT-b-PEGMA films was influenced by the incorporation of gold nanoparticles (GNPs) coated by poly(ethylene glycol) ligands. Indeed, the crystalline structuration of the P3HT sequence was counterbalanced by the addition in the film of gold nanoparticles finely localized within the copolymer PEGMA matrix. Transmission electron microscopy and time-of-flight secondary ion mass spectrometry analysis validated the GNP homogeneous localization into the compatible PEGMA phase. Differential scanning calorimetry showed the rod block crystallization disruption. A morphological transition of the self-assembly is observed by atomic force microscopy from P3HT fibrils into out-of-plane cylinders driven by the nanophase segregation.