TEER and Ion Selective Transwell-Integrated Sensors System for Caco-2 Cell Model.

Monitoring of ions in real-time directly in cell culture systems and in organ-on-a-chip platforms represents a significant investigation tool to understand ion regulation and distribution in the body and ions' involvement in biological mechanisms and specific pathologies. Innovative flexible sensors coupling electrochemical stripping analysis (square wave anodic stripping voltammetry, SWASV) with an ion selective membrane (ISM) were developed and integrated in Transwell™ cell culture systems to investigate the transport of zinc and copper ions across a human intestinal Caco-2 cell monolayer. The fabricated ion-selective sensors demonstrated good sensitivity (1 × 10-11 M ion concentration) and low detection limits, consistent with pathophysiological cellular concentration ranges. A non-invasive electrochemical impedance spectroscopy (EIS) analysis, in situ, across a selected spectrum of frequencies (10-105 Hz), and an equivalent circuit fitting were employed to obtain useful electrical parameters for cellular barrier integrity monitoring. Transepithelial electrical resistance (TEER) data and immunofluorescent images were used to validate the intestinal epithelial integrity and the permeability enhancer effect of ethylene glycol-bis(2-aminoethylether)-N,N,N',N'-tetraacetic acid (EGTA) treatment. The proposed devices represent a real prospective tool for monitoring cellular and molecular events and for studies on gut metabolism/permeability. They will enable a rapid integration of these sensors into gut-on-chip systems.

Poly(l-lactide-co-caprolactone-co-glycolide)-Based Nanoparticles as Delivery Platform: Effect of the Surfactants on Characteristics and Delivery Efficiency.

Polymeric nanoparticles made of the copolymer Poly(L-lactide-co-caprolactone-co-glycolide) were prepared using the solvent evaporation method. Two different surfactants, polyvinyl alcohol and dextran, and a mixture of the two were employed. The three types of nanoparticles were used as hosting carriers of two chemotherapeutic drugs, the hydrophilic doxorubicin and the hydrophobic SN-38. The morphostructural characterization showed similar features for the three types of nanoparticles, while the drug encapsulation efficiency indicated that the dextran-based systems are the most effective with both drugs. Cellular studies with breast cancer cells were performed to compare the delivery capability and the cytotoxicity profile of the three nanosystems. The results show that the unloaded nanoparticles are highly biocompatible at the administered concentrations and confirmed that dextran-coated nanoparticles are the most efficient vectors to release the two drugs, exerting cytotoxic activity. PVA, on the other hand, shows limited drug release in vitro, probably due to strong interactions with both drugs. Data also show the release is more efficient for doxorubicin than for SN-38; indeed, the doxorubicin IC50 value for the dextran-coated nanoparticles was about 35% lower than the free drug. This indicates that these nanocarriers are suitable candidates to deliver hydrophilic drugs while needing further modification to host hydrophobic molecules.

How Microgels Can Improve the Impact of Organ-on-Chip and Microfluidic Devices for 3D Culture: Compartmentalization, Single Cell Encapsulation and Control on Cell Fate.

The Organ-on-chip (OOC) devices represent the new frontier in biomedical research to produce micro-organoids and tissues for drug testing and regenerative medicine. The development of such miniaturized models requires the 3D culture of multiple cell types in a highly controlled microenvironment, opening new challenges in reproducing the extracellular matrix (ECM) experienced by cells in vivo. In this regard, cell-laden microgels (CLMs) represent a promising tool for 3D cell culturing and on-chip generation of micro-organs. The engineering of hydrogel matrix with properly balanced biochemical and biophysical cues enables the formation of tunable 3D cellular microenvironments and long-term in vitro cultures. This focused review provides an overview of the most recent applications of CLMs in microfluidic devices for organoids formation, highlighting microgels' roles in OOC development as well as insights into future research.

Lipid-Based Nanovesicles for Simultaneous Intracellular Delivery of Hydrophobic, Hydrophilic, and Amphiphilic Species.

Lipid nanovesicles (NVs) are the first nanoformulation that entered the clinical use in oncology for the treatment of solid tumors. They are indeed versatile systems which can be loaded with either hydrophobic or hydrophilic molecules, for both imaging and drug delivery, and with high biocompatibility, and limited immunogenicity. In the present work, NVs with a lipid composition resembling that of natural vesicles were prepared using the ultrasonication method. The NVs were successfully loaded with fluorophores molecules (DOP-F-DS and a fluorescent protein), inorganic nanoparticles (quantum dots and magnetic nanoparticles), and anti-cancer drugs (SN-38 and doxorubicin). The encapsulation of such different molecules showed the versatility of the developed systems. The size of the vesicles varied from 100 up to 300 nm depending on the type of loaded species, which were accommodated either into the lipid bilayer or into the aqueous core according to their hydrophobic or hydrophilic nature. Viability assays were performed on cellular models of breast cancer (MCF-7 and MDA-MB-231). Results showed that NVs with encapsulated both drugs simultaneously led to a significant reduction of the cellular activity (up to 22%) compared to the free drugs or to the NVs encapsulated with only one drug. Lipidomic analysis suggested that the mechanism of action of the drugs is the same, whether they are free or encapsulated, but administration of the drugs by means of nanovesicles is more efficient in inducing cellular damage, likely because of a quicker internalization and a sustained release. This study confirms the versatility and the potential of lipid NVs for cancer treatment, as well as the validity of the ultrasound preparation method for their preparation.

Piezoelectricity and Biocompatibility of Flexible ScxAl(1-x)N Thin Films for Compliant MEMS Transducers.

There is huge research activity in the development of flexible and biocompatible piezoelectric materials for next-generation compliant micro electro-mechanical systems (MEMS) transducers to be exploited in wearable devices and implants. This work reports for the first time on the development of flexible ScxAl(1-x)N films deposited by sputtering technique onto polyimide substrates, assessing their piezoelectricity and biocompatibility. Flexible ScxAl(1-x)N films have been analyzed in terms of morphological, structural, and piezoelectric properties. ScxAl(1-x)N layer exhibits a good surface roughness of 4.40 nm and moderate piezoelectricity with an extracted effective piezoelectric coefficient (d33eff) value of 1.87 ± 0.06 pm/V, in good agreement with the diffraction pattern analysis results. Cell viability assay, performed to study the interaction of the ScxAl(1-x)N films with human cell lines, shows that this material does not have significant effects on tested cells. Furthermore, the ScxAl(1-x)N layer, integrated onto a flexible device and analyzed by bending/unbending measurements, shows a peak-to-peak open-circuit voltage (VOC) of 0.32 V and a short-circuit current (ISC) of 0.27 µA, with a generated power of 19.28 nW under optimal resistive load, thus demonstrating the potential of flexible ScxAl(1-x)N films as active layers for next-generation wearable/implantable piezoelectrics.

An insight on type I collagen from horse tendon for the manufacture of implantable devices.

Type I collagen is the most abundant protein of the human body. Due to its favourable properties, collagen extracted from animal tissues is adopted to manufacture a wide range of devices for biomedical applications. Compared to bovine and porcine collagens, which are the most largely used, equine collagen is free from the risk of zoonosis, has no reported immune reactions, and has not religious constraints. In this work, a recently available type I collagen extracted from horse tendon was evaluated and compared with a commercially available collagen isoform derived from the same species and tissue. Detailed physical, chemical and biological investigations were performed, in agreement with the requirements of the current standard for the characterization of type I collagen to be used for the manufacture of Tissue Engineering Medical Products. To the best of our knowledge, this is the first report on the complete primary structure of the investigated collagen.

Novel synthesis of platinum complexes and their intracellular delivery to tumor cells by means of magnetic nanoparticles.

Platinum-based drugs are popular in clinics as chemotherapeutic agents to treat solid tumors. However, severe side effects such as nephro- and neurotoxicity impose strict dosage limitations that can lead to the development of drug resistance and tumor relapse. To overcome these issues Pt(iv) prodrugs and platinum delivery systems might represent the next generation of platinum-based drugs. In this study four novel Pt(ii) complexes (namely, PEG-Glu-Pt-EDA, PEG-Glu-Pt-DACH, PEG-Mal-Pt-EDA and PEG-Mal-Pt-DACH) were synthesized and a general strategy to covalently bind them to iron oxide nanoparticles was developed. The intracellular uptake and cell distribution studies of Pt-tethered magnetic nanoparticles on breast and ovarian cancer cell line models indicate that binding of the Pt complexes to the nanoparticles facilitates, for all the complexes, cellular internalization. Moreover, the magnetic nanoparticles (MNPs), as shown in a magnetofection experiment, enhance the uptake of MNP-Pt conjugates if a magnet is placed beneath the culture dish of tumor cells. As shown by a Pt release experiment, intranuclear platinum quantification and TEM analysis on cell sections, the presence of a pH-sensitive dicarboxylic group coordinating the Pt complex, triggers platinum dissociation from the NP surface. In addition, the triazole moiety facilitates endosomal swelling and the leakage of platinum from the endosomes with intranuclear localization of platinum release by the NPs. Finally, as assessed by MTT, caspase, calcein/ethidium bromide live/dead assays, among the four NP-Pt conjugates, the NP-Glu-Pt-EDA complex having a glutamate ring and ethylenediamine as a chelating amine group of the platinum showed higher cytotoxicity than the other three MNP-platinum conjugates.

Exploiting Photo- and Electroluminescence Properties of FIrpic Organic Crystals.

In this work, we investigate the optical and structural properties of the well-known triplet emitter bis(4',6'-difluorophenylpyridinato)-iridium(III) picolinate (FIrpic), showing that its ability to pack in two different ordered crystal structures promotes attractive photophysical properties that are useful for solid-state lighting applications. This approach allows the detrimental effects of the nonradiative pathways on the luminescence performance in highly concentrated organic active materials to be weakened. The remarkable electro-optical behavior of sky-blue phosphorescent organic light-emitting diodes incorporating crystal domains of FIrpic, dispersed into an appropriate matrix as an active layer, has also been reported as well as the X-ray diffraction, nuclear magnetic resonance, electro-ionization mass spectrometry, and scanning electron microscopy analyses of the crystalline samples. We consider this result as a crucial starting point for further research aimed at the use of a crystal triplet emitter in optoelectronic devices to overcome the long-standing issue of luminescence self-quenching.

New biocompatible polymeric micelles designed for efficient intracellular uptake and delivery.

New amphiphilic block copolymers are easily synthesised by post-polymerisation modifications of poly(glycidyl methacrylate) chain derivatives. The obtained material, upon dispersion in water, is capable of self-assembling into robust micelles. These nanoparticles, which are also characterised by adaptable stability, were loaded with different thiophene based fluorophores. The photoluminescent micelles were administered to cultured cells revealing a high and rapid internalisation of structurally different fluorescent molecules by the same internalisation pathway. Appropriate pairs of chromophores were selected and loaded into the micelles to induce Förster resonance energy transfer (FRET). The disappearing of the FRET phenomenon, after cell uptaking, demonstrated the intracellular release of the nanoparticle contents. The studied nanomaterial and the loaded chromophores have also shown to be biocompatible and non toxic towards the tested cells.

Enzyme-responsive multifunctional surfaces for controlled uptake/release of (bio)molecules.

The current trend in the development of biomaterials is towards bioactive and biodegradable systems. In particular, enzyme-responsive structures are useful tools to realize biodegradable surfaces for the controlled delivery of biomolecules/drugs through a triggered surface erosion process. Up to now, enzyme-responsive structures have been designed by covalent linkage between synthetic polymers and biodegradable functionalities that are responsive to chemical and biological cues (i.e. proteases or pH) [1-4]. Here, we present a novel approach to achieve enzyme-responsive surface-attached networks by exploiting the non-covalent interaction between streptavidin and biotin. The functional component of this three-dimensional (3D) structure is a layer of biotinylated peptides that are degraded by the action of specific proteases. The system was stable under typical physiological conditions; however, it was efficiently degraded upon enzyme exposure. Further, the controlled release of biomolecules and drugs--previously entrapped into the surface-attached network--was demonstrated to occur as a consequence of the enzymatic cleavage. This versatile approach does not require complex chemical procedures. Interestingly, it can be easily adapted to different enzyme-peptide partners and therefore is very attractive for tissue replacement, drug delivery and biosensing.

Parylene C surface functionalization and patterning with pH-responsive microgels.

Parylene C is a polymer well-known for its inertness and chemical resistance, thus ideal for covering and sealing 3D substrates and structures by conformal coating. In the present study, the Parylene C surface is modified by functionalization with pH-responsive poly(methacrylic acid) microgels either over the whole surface, or in a pattern through a poly(dimethylsiloxane) stamp. The surface functionalization consists of two phases: first, an oxygen plasma treatment is used to make the surface superhydrophilic, inducing the formation of polar functional groups and surface topography modifications; then, the plasma-treated samples are functionalized by drop casting a solution of pH-responsive microgels, or in a pattern via microcontact printing of the same solution. While both techniques, namely, drop casting and microcontact printing, are easy to use, fast, and cheap, the microcontact printing was found to provide a more homogeneous functionalization and to be applicable to any shape of substrate. The functionalization effectiveness was tested by the repeated uptake and release of a fluorescent labeled monoclonal CD4 antibody at different pH values, thus suggesting a new sensing approach.

In situ formation and size control of gold nanoparticles into chitosan for nanocomposite surfaces with tailored wettability.

The in situ formation of gold nanoparticles into the natural polymer chitosan is described upon pulsed laser irradiation. In particular, hydrogel-type films of chitosan get loaded with the gold precursor, chloroauric acid salt (HAuCl(4)), by immersion in its aqueous solution. After the irradiation of this system with increasing number of ultraviolet laser pulses, we observe the formation of gold nanoparticles with increasing density and decreasing size. Analytical studies using absorption measurements, atomic force microscopy, scanning electron microscopy, and X-ray photoelectron spectroscopy of the nanocomposite samples throughout the irradiation procedure reveal that under the specific irradiation conditions there are two competing mechanisms responsible for the nanoparticles production: the photoreduction of the precursor responsible for the rising growth of gold particles with increasing size and the subsequent photofragmentation of these particles into smaller ones. The described method allows the localized formation of gold nanoparticles into specific areas of the polymeric films, expanding its potential applications due to its patterning capability. The size and density control of the gold nanoparticles, obtained by the accurate increase of the laser irradiation time, is accompanied by the simultaneously controlled increase of the wettability of the obtained gold nanocomposite surfaces. The capability of tailoring the hydrophilicity of nanocomposite materials based on natural polymer and biocompatible gold nanoparticles provides new potentialities in microfluidics or lab on chip devices for blood analysis or drugs transport, as well as in scaffold development for preferential cells growth.

pH controlled staining of CD4(+) and CD19(+) cells within functionalized microfluidic channel.

Herein proposed is a simple system to realize hands-free labeling and simultaneous detection of two human cell lines within a microfluidic device. This system was realized by novel covalent immobilization of pH-responsive poly(methacrylic acid) microgels onto the inner glass surface of an assembled polydimethylsiloxane/glass microfluidic channel. Afterwards, selected thiophene labeled monoclonal antibodies, specific for recognition of CD4 antigens on T helper/inducer cells and CD19 antigens on B lymphocytes cell lines, were encapsulated in their active state by the immobilized microgels. When the lymphocytes suspension, containing the two target subpopulations, was flowed through the microchannel, the physiological pH of the cellular suspension induced the release of the labeled antibodies from the microgels and thus the selective cellular staining. The selective pH-triggered staining of the CD4- and CD19-positive cells was investigated in this preliminary experimental study by laser scanning confocal microscopy. This approach represents an interesting and versatile tool to realize cellular staining in a defined module of lab-on-a-chip devices for subsequent detection and counting.