RESUMO
The adoption of innovative advanced materials holds vast potential, contingent upon addressing safety and sustainability concerns. The European Commission advocates the integration of Safe and Sustainable by Design (SSbD) principles early in the innovation process to streamline market introduction and mitigate costs. Within this framework, encompassing ecological, social, and economic factors is paramount. The NanoSafety Cluster (NSC) delineates key safety and sustainability areas, pinpointing unresolved issues and research gaps to steer the development of safe(r) materials. Leveraging FAIR data management and integration, alongside the alignment of regulatory aspects, fosters informed decision-making and innovation. Integrating circularity and sustainability mandates clear guidance, ensuring responsible innovation at every stage. Collaboration among stakeholders, anticipation of regulatory demands, and a commitment to sustainability are pivotal for translating SSbD into tangible advancements. Harmonizing standards and test guidelines, along with regulatory preparedness through an exchange platform, is imperative for governance and market readiness. By adhering to these principles, the effective and sustainable deployment of innovative materials can be realized, propelling positive transformation and societal acceptance.
RESUMO
The past few decades of managing the uncertain risks associated with nanomaterials have provided valuable insights (knowledge gaps, tools, methods, etc.) that are equally important to promote safe and sustainable development and use of advanced materials. Based on these insights, the current paper proposes several actions to optimize the risk and sustainability governance of advanced materials. We emphasise the importance of establishing a European approach for risk and sustainability governance of advanced materials as soon as possible to keep up with the pace of innovation and to manage uncertainty among regulators, industry, SMEs and the public, regarding potential risks and impacts of advanced materials. Coordination of safe and sustainable advanced material research efforts, and data management according to the Findable, Accessible, Interoperable and Reusable (FAIR) principles will enhance the generation of regulatory-relevant knowledge. This knowledge is crucial to identify whether current regulatory standardised and harmonised test methods are adequate to assess advanced materials. At the same time, there is urgent need for responsible innovation beyond regulatory compliance which can be promoted through the Safe and Sustainable Innovation Approach. that combines the Safe and Sustainable by Design concept with Regulatory Preparedness, supported by a trusted environment. We further recommend consolidating all efforts and networks related to the risk and sustainability governance of advanced materials in a single, easy-to-use digital portal. Given the anticipated complexity and tremendous efforts required, we identified the need of establishing an organisational structure dedicated to aligning the fast technological developments in advanced materials with proper risk and sustainability governance. Involvement of multiple stakeholders in a trusted environment ensures a coordinated effort towards the safe and sustainable development, production, and use of advanced materials. The existing infrastructures and network of experts involved in the governance of nanomaterials would form a solid foundation for such an organisational structure.
RESUMO
A roadmap was developed to strengthen standardisation activities for risk governance of nanotechnology. Its baseline is the available standardised and harmonised methods for nanotechnology developed by the International Organization for Standardization (ISO), the European Committee for Standardization (CEN), and the Organisation for Economic Co-operation and Development (OECD). In order to identify improvements and needs for new themes in standardisation work, an analysis of the state-of-the-art concepts and interpretations of risk governance of nanotechnology was performed. Eleven overall areas of action were identified, each including a subset of specific topics. Themes addressed include physical chemical characterisation, assessment of hazard, exposure, risk and socio-economic factors, as well as education & training and social dialogue. This has been visualised in a standardisation roadmap spanning a timeframe of ten years and including key outcomes and highlights of the analysis. Furthermore, the roadmap indicates potential areas of action for harmonisation and standardisation (H&S) for nanomaterials and nanotechnology. It also includes an evaluation of the current level (limited, moderate, intense) of ongoing H&S activities and indicates the time horizon for the different areas of action. As the identified areas differ in their state of development, the number and type of actions varied widely amongst the different actions towards achieving standardisation. Thus, priority areas were also identified. The overall objective of these actions is to strengthen risk governance towards a safe use of nanomaterials and nano-related products. Though not explicitly addressed, risk-based legislation and policies are supported via the proposed H&S actions.
Assuntos
Nanoestruturas , Nanotecnologia , Fatores Econômicos , Escolaridade , Padrões de ReferênciaRESUMO
Genotoxicity testing for nanomaterials remains challenging as standard testing approaches require some adaptation, and further development of nano-specific OECD Test Guidelines (TGs) and Guidance Documents (GDs) are needed. However, the field of genotoxicology continues to progress and new approach methodologies (NAMs) are being developed that could provide relevant information on the range of mechanisms of genotoxic action that may be imparted by nanomaterials. There is a recognition of the need for implementation of new and/or adapted OECD TGs, new OECD GDs, and utilization of NAMs within a genotoxicity testing framework for nanomaterials. As such, the requirements to apply new experimental approaches and data for genotoxicity assessment of nanomaterials in a regulatory context is neither clear, nor used in practice. Thus, an international workshop with representatives from regulatory agencies, industry, government, and academic scientists was convened to discuss these issues. The expert discussion highlighted the current deficiencies that exist in standard testing approaches within exposure regimes, insufficient physicochemical characterization, lack of demonstration of cell or tissue uptake and internalization, and limitations in the coverage of genotoxic modes of action. Regarding the latter aspect, a consensus was reached on the importance of using NAMs to support the genotoxicity assessment of nanomaterials. Also highlighted was the need for close engagement between scientists and regulators to (i) provide clarity on the regulatory needs, (ii) improve the acceptance and use of NAM-generated data, and (iii) define how NAMs may be used as part of weight of evidence approaches for use in regulatory risk assessments.
Assuntos
Nanoestruturas , Organização para a Cooperação e Desenvolvimento Econômico , Testes de Mutagenicidade/métodos , Nanoestruturas/toxicidade , Nanoestruturas/química , Medição de RiscoRESUMO
Over the recent years, EU chemicals legislation, guidance and test guidelines have been developed or adapted for nanomaterials to facilitate safe use of nanomaterials. This paper provides an overview of the information requirements across different EU regulatory areas. For each information requirement, a group of 22 experts identified potential needs for further action to accommodate guidance and test guidelines to nanomaterials. Eleven different needs for action were identified, capturing twenty-two information requirements that are specific to nanomaterials and relevant to multiple regulatory areas. These were further reduced to three overarching issues: 1) resolve issues around nanomaterial dispersion stability and dosing in toxicity testing, in particular for human health endpoints, 2) further develop tests or guidance on degradation and transformation of organic nanomaterials or nanomaterials with organic components, and 3) further develop tests and guidance to measure (a)cellular reactivity of nanomaterials. Efforts towards addressing these issues will result in better fit-for-purpose test methods for (EU) regulatory compliance. Moreover, it secures validity of hazard and risk assessments of nanomaterials. The results of the study accentuate the need for a structural process of identification of information needs and knowledge generation, preferably as part of risk governance and closely connected to technological innovation policy.
Assuntos
Segurança Química , Nanoestruturas , Humanos , Nanoestruturas/toxicidade , Políticas , Medição de Risco/métodos , Testes de Toxicidade/métodosRESUMO
Manufacturing and functionalizing materials at the nanoscale has led to the generation of a whole array of nanoforms (NFs) of substances varying in size, morphology, and surface characteristics. Due to financial, time, and ethical considerations, testing every unique NF for adverse effects is virtually impossible. Use of hypothesis-driven grouping and read-across approaches, as supported by the GRACIOUS Framework, represents a promising alternative to case-by-case testing that will make the risk assessment process more efficient. Through application of appropriate grouping hypotheses, the Framework facilitates the assessment of similarity between NFs, thereby supporting grouping and read-across of information, minimizing the need for new testing, and aligning with the 3R principles of replacement, reduction, and refinement of animals in toxicology studies. For each grouping hypothesis an integrated approach to testing and assessment (IATA) guides the user in data gathering and acquisition to test the hypothesis, following a structured format to facilitate efficient decision-making. Here we present the template used to generate the GRACIOUS grouping hypotheses encompassing information relevant to "Lifecycle, environmental release, and human exposure", "What they are: physicochemical characteristics", "Where they go: environmental fate, uptake, and toxicokinetics", and "What they do: human and environmental toxicity". A summary of the template-derived hypotheses focusing on human health is provided, along with an overview of the IATAs generated by the GRACIOUS project. We discuss the application and flexibility of the template, providing the opportunity to expand the application of grouping and read-across in a logical, evidence-based manner to a wider range of NFs and substances.
Assuntos
Substâncias Perigosas , Animais , Humanos , Medição de Risco , Substâncias Perigosas/toxicidade , Substâncias Perigosas/química , ToxicocinéticaRESUMO
The risk of each nanoform (NF) of the same substance cannot be assumed to be the same, as they may vary in their physicochemical characteristics, exposure and hazard. However, neither can we justify a need for more animal testing and resources to test every NF individually. To reduce the need to test all NFs, (regulatory) information requirements may be fulfilled by grouping approaches. For such grouping to be acceptable, it is important to demonstrate similarities in physicochemical properties, toxicokinetic behaviour, and (eco)toxicological behaviour. The GRACIOUS Framework supports the grouping of NFs, by identifying suitable grouping hypotheses that describe the key similarities between different NFs. The Framework then supports the user to gather the evidence required to test these hypotheses and to subsequently assess the similarity of the NFs within the proposed group. The evidence needed to support a hypothesis is gathered by an Integrated Approach to Testing and Assessment (IATA), designed as decision trees constructed of decision nodes. Each decision node asks the questions and provides the methods needed to obtain the most relevant information. This White paper outlines existing and novel methods to assess similarity of the data generated for each decision node, either via a pairwise analysis conducted property-by-property, or by assessing multiple decision nodes simultaneously via a multidimensional analysis. For the pairwise comparison conducted property-by-property we included in this White paper: The x-fold, Bayesian and Arsinh-OWA distance algorithms performed comparably in the scoring of similarity between NF pairs. The Euclidean distance was also useful, but only with proper data transformation. The x-fold method does not standardize data, and thus produces skewed histograms, but has the advantage that it can be implemented without programming knowhow. A range of multidimensional evaluations, using for example dendrogram clustering approaches, were also investigated. Multidimensional distance metrics were demonstrated to be difficult to use in a regulatory context, but from a scientific perspective were found to offer unexpected insights into the overall similarity of very different materials. In conclusion, for regulatory purposes, a property-by-property evaluation of the data matrix is recommended to substantiate grouping, while the multidimensional approaches are considered to be tools of discovery rather than regulatory methods.
Assuntos
Nanoestruturas , Animais , Teorema de Bayes , Nanoestruturas/química , Medição de Risco/métodosRESUMO
Similarity assessment is one of the means of optimally using scarcely available experimental data on the fate and hazards of nanoforms (NFs) for regulatory purposes. For a set of NFs that are shown to be similar it is allowed in a regulatory context to apply the information available on any of the NFs within the group to the whole set of NFs. Obviously, a proper justification for such a similarity assessment is to be provided. Within the context of exemplifying such a justification, a case study was performed aimed at assessing the similarity of a set of spherical metallic NFs that different with regard to chemical composition (three metals) and particle size (three different sizes). The endpoints of assessment were root elongation and biomass increase of lettuce (Lactuca sativa L.) seedlings and exposure assessment was performed in order to express the actual exposure concentration in terms of time-weighted average particle concentrations. The results of the study show that for the specific endpoints assessed, chemical composition is driving NF toxicity and this is mostly due to impacts on the fate of the NFs. On the other hand, particle size of Cu NFs had a negligible impact on the dose-response relationships for the specific endpoints assessed. It is thus concluded that hazard data available on spherical Cu NF tested in our case can be used to inform on the hazards of any spherical Cu NF within the size range of 25-100 nm, but only applies for the certain endpoints. Also, toxicity data for the Cu2+-ion are suited for such a similarity assessment.
Assuntos
Lactuca , Nanopartículas Metálicas , Lactuca/fisiologia , Nanopartículas Metálicas/efeitos adversos , Metais , Tamanho da Partícula , Medição de Risco/métodosRESUMO
In recent years, various ecotoxicological test guidelines and (technical) guidance documents have been evaluated and updated with regard to their applicability to nanomaterials (NMs). Several of these have currently reached official regulatory status. Ensuring their harmonized implementation with previously recognized methods for ecotoxicity testing of chemicals is a crucial next step towards effective and efficient regulation of NMs. In the present study, we evaluated the feasibility of assessing multigenerational effects in the first generation of offspring derived from exposed Daphnia magna whilst maintaining test conditions in accordance with regulatory test guidelines and guidance documents for NMs. To do so, we integrated the recommendations for ecotoxicological testing of NMs as defined in OECD Guidance Document 317 into an extended long-term D. magna reproduction test method (OECD Test Guideline 211) and assessed effects of two poorly soluble NMs (nTiO2 and nCeO2). Our results show adverse effects on life-history parameters of D. magna exposed to the selected nanomaterials within the range of reported environmental concentrations. We argue that conforming to OECD test guidelines and accompanying guidance for nanomaterials is feasible when performing D. magna reproduction tests and can minimize unnecessary duplication of similar experiments, even when extensions to the standardized test setup are added.
Assuntos
Nanoestruturas , Poluentes Químicos da Água , Animais , Daphnia , Ecotoxicologia/métodos , Nanoestruturas/toxicidade , Reprodução , Poluentes Químicos da Água/toxicidadeRESUMO
Identifying and characterising nanomaterials require additional information on physico-chemical properties and test methods, compared to chemicals in general. Furthermore, regulatory decisions for chemicals are usually based upon certain toxicological properties, and these effects may not be equivalent to those for nanomaterials. However, regulatory agencies lack an authoritative decision framework for nanomaterials that links the relevance of certain physico-chemical endpoints to toxicological effects. This paper investigates various physico-chemical endpoints and available test methods that could be used to produce such a decision framework for nanomaterials. It presents an overview of regulatory relevance and methods used for testing fifteen proposed physico-chemical properties of eleven nanomaterials in the OECD Working Party on Manufactured Nanomaterials' Testing Programme, complemented with methods from literature, and assesses the methods' adequacy and applications limits. Most endpoints are of regulatory relevance, though the specific parameters depend on the nanomaterial and type of assessment. Size (distribution) is the common characteristic of all nanomaterials and is decisive information for classifying a material as a nanomaterial. Shape is an important particle descriptor. The octanol-water partitioning coefficient is undefined for particulate nanomaterials. Methods, including sample preparation, need to be further standardised, and some new methods are needed. The current work of OECD's Test Guidelines Programme regarding physico-chemical properties is highlighted.
Assuntos
Nanoestruturas/química , Humanos , Organização para a Cooperação e Desenvolvimento Econômico , Tamanho da Partícula , Água/químicaRESUMO
The terms "Safe innovation" and "Safe(r)-by-design" are currently popular in the field of nanotechnology. These terms are used to describe approaches that advocate the consideration of safety aspects already at an early stage of the innovation process of (nano)materials and nanoenabled products. Here, we investigate the possibilities of considering safety aspects during various stages of the innovation process of graphene, outlining what information is already available for assessing potential hazard, exposure, and risks. In addition, we recommend further steps to be taken by various stakeholders to promote the safe production and safe use of graphene.
RESUMO
In the current paper, a new strategy for risk assessment of nanomaterials is described, which builds upon previous project outcomes and is developed within the FP7 NANoREG project. NANoREG has the aim to develop, for the long term, new testing strategies adapted to a high number of nanomaterials where many factors can affect their environmental and health impact. In the proposed risk assessment strategy, approaches for (Quantitative) Structure Activity Relationships ((Q)SARs), grouping and read-across are integrated and expanded to guide the user how to prioritise those nanomaterial applications that may lead to high risks for human health. Furthermore, those aspects of exposure, kinetics and hazard assessment that are most likely to be influenced by the nanospecific properties of the material under assessment are identified. These aspects are summarised in six elements, which play a key role in the strategy: exposure potential, dissolution, nanomaterial transformation, accumulation, genotoxicity and immunotoxicity. With the current approach it is possible to identify those situations where the use of nanospecific grouping, read-across and (Q)SAR tools is likely to become feasible in the future, and to point towards the generation of the type of data that is needed for scientific justification, which may lead to regulatory acceptance of nanospecific applications of these tools.
Assuntos
Nanopartículas/toxicidade , Nanotecnologia/métodos , Testes de Toxicidade/métodos , Animais , Biotransformação , Carga Corporal (Radioterapia) , Qualidade de Produtos para o Consumidor , Humanos , Sistema Imunitário/efeitos dos fármacos , Estrutura Molecular , Testes de Mutagenicidade , Nanopartículas/química , Nanopartículas/metabolismo , Segurança do Paciente , Relação Quantitativa Estrutura-Atividade , Medição de Risco , SolubilidadeRESUMO
Physicochemical properties of chemicals affect their exposure, toxicokinetics/fate and hazard, and for nanomaterials, the variation of these properties results in a wide variety of materials with potentially different risks. To limit the amount of testing for risk assessment, the information gathering process for nanomaterials needs to be efficient. At the same time, sufficient information to assess the safety of human health and the environment should be available for each nanomaterial. Grouping and read-across approaches can be utilised to meet these goals. This article presents different possible applications of grouping and read-across for nanomaterials within the broader perspective of the MARINA Risk Assessment Strategy (RAS), as developed in the EU FP7 project MARINA. Firstly, nanomaterials can be grouped based on limited variation in physicochemical properties to subsequently design an efficient testing strategy that covers the entire group. Secondly, knowledge about exposure, toxicokinetics/fate or hazard, for example via properties such as dissolution rate, aspect ratio, chemical (non-)activity, can be used to organise similar materials in generic groups to frame issues that need further attention, or potentially to read-across. Thirdly, when data related to specific endpoints is required, read-across can be considered, using data from a source material for the target nanomaterial. Read-across could be based on a scientifically sound justification that exposure, distribution to the target (fate/toxicokinetics) and hazard of the target material are similar to, or less than, the source material. These grouping and read-across approaches pave the way for better use of available information on nanomaterials and are flexible enough to allow future adaptations related to scientific developments.
Assuntos
Nanoestruturas/toxicidade , Meio Ambiente , Humanos , Medição de Risco/métodos , SegurançaRESUMO
In recent years, an increasing number of applications and products containing or using nanomaterials have become available. This has raised concerns that some of these materials may introduce new risks for humans or the environment. A clear definition to discriminate nanomaterials from other materials is prerequisite to include provisions for nanomaterials in legislation. In October 2011 the European Commission published the 'Recommendation on the definition of a nanomaterial', primarily intended to provide unambiguous criteria to identify materials for which special regulatory provisions might apply, but also to promote consistency on the interpretation of the term 'nanomaterial'. In this paper, the current status of various regulatory frameworks of the European Union with regard to nanomaterials is described, and major issues relevant for regulation of nanomaterials are discussed. This will contribute to better understanding the implications of the choices policy makers have to make in further regulation of nanomaterials. Potential issues that need to be addressed and areas of research in which science can contribute are indicated. These issues include awareness on situations in which nano-related risks may occur for materials that fall outside the definition, guidance and further development of measurement techniques, and dealing with changes during the life cycle.
Assuntos
Política de Saúde/legislação & jurisprudência , Nanoestruturas , Formulação de Políticas , União Europeia , Humanos , Nanoestruturas/efeitos adversos , Nanotecnologia/legislação & jurisprudência , Medição de Risco/legislação & jurisprudênciaRESUMO
Regarding impact on ecological soil functioning, metal pollution is often considered a constant factor for certain sampling sites. However, especially bioavailable concentrations may differ in space and time. This aspect was investigated on four sites along a metal-polluted river, differing in soil characteristics and metal concentrations. Every four weeks earthworm densities, soil characteristics, and metal concentrations in soil and earthworms were determined. Earthworm biomass and density fluctuated in time and increased with increasing metal contamination, indicating the presence of compensating factors. Multivariate analysis suggested organic matter and moisture content to be the main factors explaining earthworm biomass. Metal concentrations in the earthworms increased with increasing total or 0.01M CaCl(2) extractable soil concentrations, but no time-related trends were seen. Cadmium concentrations in the earthworms exceeded background values, suggesting a potential risk. The neutral red retention biomarker assay, however, did not show any signs of metal stress in the earthworms.
Assuntos
Metais Pesados/metabolismo , Oligoquetos/metabolismo , Rios , Poluentes do Solo/metabolismo , Animais , Biomarcadores/metabolismo , Monitoramento Ambiental , Metais Pesados/análise , Países Baixos , Vermelho Neutro/metabolismo , Densidade Demográfica , Solo , Poluentes do Solo/análise , Fatores de TempoRESUMO
An urgent need exists for incorporating heterocyclic compounds and (bio)transformation products in ecotoxicological test schemes and risk assessment of polycyclic aromatic compounds (PACs). The aim of the present study therefore was to determine the chronic effects of (heterocyclic) PACs on two terrestrial invertebrates, the springtail Folsomia candida and the enchytraeid Enchytraeus crypticus. The effects of 11 PACs were determined in chronic experiments using reproduction and survival as endpoints. The results demonstrated that as far as narcosis-induced mortality is concerned, effects of both homocyclic and heterocyclic PACs are well described by the relationship between estimated pore-water 50% lethal concentrations and log Kow. In contrast, specific effects on reproduction varied between species and between compounds as closely related as isomers, showing up as deviations from the relationship between pore-water 50% effect concentrations and log Kow. These unpredictable specific effects on reproduction force one to test the toxicity of these PACs to populations of soil invertebrates to obtain reliable effect concentrations for use in risk assessment of PACs.
Assuntos
Insetos/efeitos dos fármacos , Hidrocarbonetos Policíclicos Aromáticos/toxicidade , Animais , Dose Letal Mediana , Solo/análise , Especificidade da EspécieRESUMO
Heterocyclic compounds by far outnumber the homocyclic PAHs. In addition, they are often more soluble in water, which may imply a greater biological significance of these heterocycles. Yet, most research focuses on the homocyclics, based on the implicit assumption that the mostly higher concentration of the homocyclics rank these compounds as priority compounds. This review critically examines the available evidence and poses questions on the biological activity and environmental risk of one small group of heterocyclics, the azaarenes, which contain one nitrogen atom in one of the aromatic rings. In different sections, the biotransformation and different types of toxicity are discussed in comparison to those of homocyclic PAHs. The last section focuses on the implications for risk assessment of PAHs. Two- and three-ringed azaarenes can be relatively easily transformed by bacteria, fungi, invertebrates, and vertebrates. The presence of the N-moiety in the smaller azaarenes leads to metabolic routes that partly differ from those of the homoaromatic analogues. Major metabolic products of the azaarenes appear to be ketones and mono- or dihydroxylated azaarenes. Microorganisms can further degrade these into multiple oxygen-containing compounds or they can open up the aza-containing aromatic ring and fully metabolize the products. Fungi and vertebrates were shown to produce the mutagenic dihydrodiol metabolites. The metabolism of the larger azaarenes in vertebrates proceeds analogous to homoaromatic PAH, because in these larger molecules the N-moiety has less influence. Transformation of the larger azaarenes by microorganisms proceeds much slower if occurring at all. Direct toxicity data of azaarenes are mostly restricted to the effects of acridine and quinoline on a relatively small number of species. From this limited set it becomes clear that differences between species are relatively small. As with homocyclic PAHs, toxicity generally increases with increasing number of rings, and baseline toxicity models based on homocyclic PAHs do apply. Toxicity differences between isomers indicate that azaarene toxicity cannot be explained by molecular size-related parameters alone, indicating that electronic forces may be important as well. Considering chronic toxicity it becomes clear that the often-used acute-to-chronic-ratios often underestimate specific chronic toxicity, even within the very limited set of chronic data available. In contrast with homocyclic PAHs, photodegradation of azaarenes shows the same degradation products as biological transformation involving monooxygenases. In general, as for homocyclic PAHs, the degree of phototoxicity is related to the UV absorption characteristics of the azaarenes, which makes it possible to apply the QSAR models developed for homocyclic PAHs to azaarenes as well. Recent research on algae showed that UV-A is the main cause of photoenhanced toxicity. Together with the fact that in the water column UV-B is almost absent, this clearly demonstrates the relevance of phototoxicity in the field. Mutagenicity of azaarenes generally proceeds through similar pathways as in homocyclic PAHs, with bay region diol epoxides as major genotoxic metabolites. The N-moiety can, however, result in differences in genotoxic activities between isomers. Carcinogenicity of azaarenes in mammals is generally restricted to four-ringed and larger structures, and mechanisms leading to cancer are similar to those of homocyclic aromatics. An exception to this general pattern is quinoline, which has been shown to induce liver cancer. The present risk assessment for PAHs is solely based on homocyclic PAHs. Yet, from the present review it becomes clear that this approach fails to protect against a vast number of heterocyclic compounds and biotransformation products that may exhibit stronger or other toxic effects than their homocyclic analogues. Therefore, incorporating the role of heterocyclic compounds and their metabolism appears to be a necessity for a reliable risk assessment for polycyclic aromatic compounds. In addition, reliable long-term protection against PAHs demands data on chronic toxicity, including teratogenicity, both for homocyclic as for heterocyclic compounds.