RESUMO
This study presents a scanning electron microscopy analysis of a failed PEEK retainer in an orthodontic patient. After 15 months of use, the patient reported a gap opening between teeth 41 and 42. The PEEK retainer was removed and sent for electron microscope analysis. To investigate the failure, scanning electron microscopy was employed to assess the microstructure and composition of the retainer at various magnifications. These findings suggest that the failure of the PEEK retainer was multifaceted, implicating factors such as material defects, manufacturing flaws, inadequate design, environmental factors, and patient-related factors. In conclusion, this scanning electron microscopy analysis offers valuable insights into the failure mechanisms of PEEK retainers in orthodontic applications. Further research is necessary to explore preventive strategies and optimize the design and fabrication of PEEK retainers, minimizing the occurrence of failures in orthodontic practice.
RESUMO
This study assessed the masticatory function of participants wearing clear aligners in order to determine whether these devices can be worn even when eating and therefore worn to extend treatment time and boost treatment effectiveness. An intercontrol test was conducted on 20 patients who received Invisalign® treatment. Each participant was instructed to chew two pieces of Hue-Check Gum® chewing gum (one pink and the other blue) in 5, 10, and 20 cycles both with and without aligners. After being removed from the oral cavity, the gum was dried and pressed using a 1 × 50 × 50 mm model that was 3D printed with a transparent layer in between. After being scanned on both sides with a flatbed scanner at 600 dpi, the samples were saved as jpg files and subjected to an optoelectronic examination using ViewGum software. To validate the procedure, a control group from a different institution (University of Bern) was used. A statistical analysis of the data was carried out. The Shapiro-Wilk test was used to confirm the normality of the samples. A one-way ANOVA test, a homogeneity of variance test, and a t-test did not reveal statistically significant differences between the two control groups, thus validating the methodology employed. In summary, clear aligners do not radically change the masticatory function while they are worn. As a result, clinicians can exploit the aligners for chewing to obtain a better fit of the plastic material to the dental surface and to attachments. Treatment times for patients could also be shorter.
RESUMO
INTRODUCTION: Mandibular setback surgery (MSS) is one of the treatment options to resolve mandibular prognathism in patients suffering from skeletal class III malocclusion, which cannot be treated with simple orthodontic treatment. The mandibular setback surgical operation can involve changes in the pharyngeal morphology, resulting in a narrowing of the posterior airway space (PAS). This aspect is associated with an increase in airflow resistance, which increases the risk of developing snoring or obstructive sleep apnea syndrome (OSAS). The aim of this study is to evaluate the medium- and long-term effects of mandibular setback surgery on the upper airways and its possible association with OSAS in patients suffering from class III skeletal malocclusion. MATERIAL AND METHODS: A total of 12 patients (5 males and 7 females) were enrolled in this study. The statistical tests highlighted a significant change in the PAS and BMI values in relation to T0, before surgery (PAS: 12.7 SD: 1.2; BMI: 21.7 SD: 1.2), and T1, after surgery (PAS: 10.3 SD: 0.6, p < 0.01; BMI: 23.8 SD: 1.2, p < 0.05). Sample size was calculated to detect an effect size of 0.9, with statistical power set at 0.8 and the significance level set at 0.05. RESULTS: No statistically significant correlation was found between the extent of mandibular setback, PAS and BMI change. CONCLUSION: This study confirms the effects of mandibular setback surgery on the upper airways, reporting a statistically significant PAS reduction in the medium- and long-term follow-up. On the other hand, no direct correlation was identified with OSAS risk, at least for the small mandibular setback (<8 mm), despite the statistically significant increase in BMI.
RESUMO
The aim of this study was to evaluate the masticatory function of subjects with clear aligners and to propose a simple and repeatable method for the clinical and experimental evaluation of masticatory function. For the testing we used almonds, a natural substance that can be easily found and stored, has intermediate consistency and hardness, is insoluble in saliva, and has the ability easily lose the moisture absorbed in the mouth. Thirty-four subjects using the Invisalign® (Align Technology, Santa Clara, CA, USA) protocol were randomly selected. This was an "intercontrol test", i.e., all subjects under the same conditions acted as controls but also as cases whilst wearing the clear aligners. Patients were asked to chew an almond for 20 s, once with aligners and once without aligners. The material was then dried, sieved, and weighted. Statistical analysis was performed to investigate any significative differences. In all our subjects, the efficiency of chewing with clear aligners was found to be comparable to the efficiency of chewing without clear aligners. In detail, the average weight after drying was 0.62 g without aligners and 0.69 g with aligners, while after sieving at 1 mm, the average weight was 0.08 g without aligners and 0.06 g with aligners. The average variation after drying was of 12%, and after sieving at 1 mm, it was 25%. In summary, there was no substantial difference between chewing with or without clear aligners. Despite some discomfort in chewing, the clear aligners were well tolerated by most subjects, who wore them without difficulty even during meals.
RESUMO
This preliminary retrospective study evaluates how effective the OrthoPulse® (Biolux Technology, Austria) is in increasing the predictability of orthodontic treatment in patients treated with Invisalign® clear aligners (Align Technology Inc., Tempe, AZ, USA). A group of 376 patients were treated with Invisalign® orthodontic clear aligners in association with an OrthoPulse®. The OrthoPulse® was prescribed for 10 min a day for the entire duration of the orthodontic treatment. The OrthoPulse® App remotely tracked the percentage compliance of each patient. The number of aligners planned with the ClinCheck software at the beginning of the treatment and the number of total aligners (including the adjunctive aligners) used to finish the treatment were then considered. After applying inclusion/exclusion criteria, a total of 40 patients remained in the study and were compared with a control group of 40 patients with the same characteristics as the study group. A statistical analysis was carried out to investigate whether using OrthoPulse® led to a statistical reduction in the number of adjunctive aligners, thus leading to a more accurate prediction of the treatment. The statistical analysis showed that patients who used OrthoPulse® needed fewer finishing aligners and a greater predictability of the treatment was obtained. In fact, in the treated group the average number of additional aligners represented 66.5% of the initial aligners, whereas in the control group 103.4% of the initially planned aligners were needed. In conclusion, in patients treated with clear aligners, OrthoPulse® would appear to increase the predictability of orthodontic treatment with clear aligners, thus reducing the number of finishing phase requirements.
RESUMO
Temporomandibular disorders (TMDs) are a condition which has multifactorial etiology. The most acknowledged method to classify TMDs is the diagnostic criteria (DC) introduced firstly by Dworkin. This protocol considers different aspects that are not only biological, but even psychosocial. Diagnosis is often based on anamnesis, physical examination and instrumental diagnosis. TMDs are classified as intra-articular and/or extra-articular disorders. Common signs and symptoms include jaw pain and dysfunction, earache, headache, facial pain, limitation to opening the mouth, ear pain and temporomandibular joint (TMJ) noises. This study regards two kind of clinicians that started in the last years to be more involved in the treatment of TMDs: osteopaths (OOs) and physiotherapists (PTs). The purpose is to analyze their attitude and clinical approach on patients affected by TMDs. Four hundred therapists answered an anonymous questionnaire regarding TMJ and TMDs. OOs showed greater knowledges on TMDs and TMJ and, the therapists with both qualifications seemed to be most confident in treating patients with TMDs. In conclusion this study highlights OOs and all the clinicians with this qualification, have a higher confidence in treating patients with TMD than the others. Dentists and orthodontists, according to this study, should co-work with OOs and PTs, because they are the specialists more requested by them than other kinds of specialists.
RESUMO
ABSTRACT: Through the analysis and evaluation of the size and morphology of teeth and jaws, it is possible to differentiate animal species including man, allowing the theory of human evolution to be established. Hominin evolution is characterized by two main features, the transition to bipedality and the increase in brain size. This had an important impact on the structure and function of the hominine skull. The aim of this article is to retrace the evolutionary steps that led to Homo Sapiens, the direct ancestor of modern man. For the following paper, scientific articles from Medline (PubMed) and Google Scholar database were used from 1929 to 2018. Hominid evolution is characterized by 2 main features, the transition to bipedality and the increase in brain size. The fossils found show that both trends have had an important impact on the morphology and function of the skull of modern man. The basicranial flexion and growth have led to the facial modifications typical of modern man. The main changes concern the mandibular evolution with the appearance of the chin, the formation of the Spee curve due to mandibular arch growth, the formation of the temporomandibular joint as a hinge joint with a sliding socket as the condyle and a better function and maximum efficiency than its predecessors thanks to respect for the divine proportions of the face. Knowledge of ontogenesis allows us to know the factors underlying human form and function, analyze and evaluate them in the clinical context.
Assuntos
Evolução Biológica , Hominidae , Animais , Face/anatomia & histologia , Fósseis , Humanos , Masculino , Base do Crânio/anatomia & histologiaRESUMO
ABSTRACT: Aesthetics and function of maxillofacial district are closely related and could interfere with patient psychological conditions. The aim of this paper is to describe and to analyze the procedures necessary for a proper surgical visualized treatment objective (VTO) realization through the use of the tracing on lateral head film, applying the divine proportion (or golden ratio) in certain steps. The method described is easy to realize, cheap and help both orthodontist and maxillo-facial surgeon to communicate each other and to the patients.For the following article, digital research and handheld research on surgical VTO planning for patients with skeletal or dentoalveolar severe deformities managed by surgeons and orthodontics were used. The research included articles in English published on dental and maxillofacial surgery journals.The surgical VTO consists of a "previsualization" of the objectives in order to make the desired changes for the individual patient. The result can thus be visualized and pre-evaluated rather than just imagined by the mind's eye. To simplify the procedure, the surgical VTO has been divided into 11 steps. The accurate model of the surgical result is fundamental in the treatment of dentofacial deformities. These predictions are intended to guide the treatment towards the desired result, to give the patient a reasonable preview of the outcome, and to ensure communication between the orthodontist and the surgeon.This technique proves to be effective in planning surgical treatment and it allows the clinician to view changes before, during, and after orthognathic surgery. The skeletal, dental, and aesthetic complete cephalometric evaluation is the key point to the long-term success of the results.
Assuntos
Estética Dentária , Procedimentos Cirúrgicos Ortognáticos , Cefalometria , Face/anatomia & histologia , Humanos , Planejamento de Assistência ao PacienteRESUMO
ABSTRACT: The purpose of this study was to investigate skeletal and dental changes affecting occlusal plane inclination after cervical headgear treatment with and without lower utility arch. In order to distinguish the orthodontic changes from natural growth a control group was employed.The sample of this study consisted by 20 Class II subjects (10 males, 10 females; mean age 8.54) treated by using cervical headgear, 19 class II children (19 males, 9 females; mean age 8.64) treated with cervical headgear and utility arch, and 21 Class II patients (11 males, 10 females; mean age 8.41) who had no therapy.Lateral head films were studied for all the patients before treatment (T1) and after therapy (T2) for all the treated groups and at the beginning and at the end of observational period for the control group; cephalometric analysis was carried out in order to seek for the modifications between time points and between groups.Means and standard deviation have been analyzed for all the groups. In order to compare the modification between the time points within the same group the ANOVA test was applied. The ANOVA test was used to compare the mean differences (T2-T1) of 3 groups.The study revealed that there were significant changes in occlusal plane inclination after the different treatment modalities employed instead control group. The treatment with cervical headgear and utility arch is more effective than cervical headgear alone in lowering occlusal plane posteriorly when it is compared with controls.
Assuntos
Oclusão Dentária , Má Oclusão Classe II de Angle , Cefalometria , Criança , Aparelhos de Tração Extrabucal , Feminino , Humanos , Masculino , Má Oclusão Classe II de Angle/diagnóstico por imagem , Má Oclusão Classe II de Angle/terapia , PescoçoRESUMO
BACKGROUND: Implantology, thanks to its predictability in oral rehabilitations, has become a widespread method for rehabilitating edentulous patients, offering excellent patient satisfaction. Improving the quality of oral health, especially if rehabilitation involves minimal short and long-term complications, leads to an improvement in the quality of life of our patients. METHODS: This clinical study was conducted to evaluate the short and long-term complications (up to 18 months) of implant-prosthetic rehabilitations performed with a new dental implant (FDS76®, Italy). RESULTS: The results showed a limited number of complications or implant failures. CONCLUSIONS: Knowing the latter could certainly help improve both surgical and dental materials performance.
Assuntos
Implantes Dentários , Arcada Edêntula , Boca Edêntula , Humanos , Qualidade de Vida , Taxa de SobrevidaRESUMO
The present study aimed to evaluate the accuracy of digitally designed surgical splints generated with milling technology (material subtractive procedure) and with 3D printing technology (material additive procedure) through a customized approach in the planning of surgical orthognathic splints. Cone beam computed tomography (CBCT) examinations and scanned dental models of 10 subjects who had required surgical treatment of skeletal malocclusion were included. Simulation of the orthognathic surgery was performed according to dento-skeletal and aesthetic characteristics of the subjects and the visual treatment objective (VTO), using Dolphin3D software (Dolphin Imaging, version 11.0, Chatsworth, CA, USA). Afterward, the Appliance Designer software (3Shape A/S, Copenhagen, Denmark) was used to digitally design the surgical splints that were generated twice using laser stereolithography technology (DWS 0.29D, DWS, Vicenza, Italy) and milling technology (Sirona inLab MC X5). Finally, each physical splint was digitalized using a desktop scanner (D500 3D, 3Shape A/S, Copenhagen, Denmark) in order to perform deviation analysis using the original project as a reference. The relative percentage of matching (trueness) was calculated (Geomagic Control X software (3D Systems, version 2018.1.1, 3D Systems, Rock Hill, SC, USA). An Independent Student's t-test was used to statistically analyze the data. The milled splints showed a lower value of root to mean square (RMS) relative to the original project (0.20 mm ± 0.018) compared to the prototyped splints (0.31 ± 0.021) (p < 0.001). According to the present findings, surgical splints generated with milling technology present higher trueness compared with 3D printing technology.
RESUMO
Coronavirus disease is now spreading in different countries of the world. The alarmism created through the media also creates confusion in people about virus spreading. The health care environments among which the dental practice could be places of spread of the virus, especially places where patients with systemic pathology could be exposed to this. The purpose of this article is to clarify coronavirus disease 2019 and its management in the dental practice. Only by following the normal guidelines on disinfection and sterilization of environments and operators, with some additional rules on the management of patients in the waiting room, it is possible to limit this risk. Limiting the risk of spreading the virus is one of the keys to its eradication.
RESUMO
INTRODUCTION: In recent years, interest has been given to the relationship between dental occlusion and athletes' performance. A correct occlusion allows for a correct position of the mandible in space and could be reached by wearing a splint made by a dentist. Achieving this condition appears to be an advantage for all athletes, and especially for those who have TMJ dysfunction. The purpose of the study was to investigate the hypothesis and common belief that correcting the occlusion or the use of a splint could improve an athlete's performance. EVIDENCE ACQUISITION: A search on electronic database has been performed and obtained 141 results; then, following the application of the inclusion criteria, only 11 articles were selected. EVIDENCE SYNTHESIS: A good occlusion seems to be an advantage for the athletes. CONCLUSIONS: The use of an occlusal splint should be evaluated in different sports, because the occlusion and TMJ conditions of the athletes are different and the efforts in which they are subjected could not be generalized because the sports have various rules and characteristics that involves the stomatognathic system differently.
Assuntos
Oclusão Dentária , MandíbulaRESUMO
Many people nowadays undergo treatments to improve their aesthetics, often neglecting the general state of health. Aesthetics and appearance have become of prime importance, perhaps correlating with of the advent of social networks and digital photographs. One of the most requested aesthetic treatments for dentists is dental bleaching through the use of whitening gels. Dental bleaching is a treatment which involves an improvement in the chrome of the teeth in a short time, and this treatment appears not invasive for the patients. In-office and at-home bleaching treatments can be found. The purpose of this scientific study is to evaluate all of the advantages and disadvantages of this medical treatment. In this study, were report information and items related to bleaching side effects. Dentists often find themselves in disagreement on this topic. The PICO (Population/Intervention/Comparison/Outcome) question investigated was: Are dental patients who have dental bleaching an increased risk of teeth damage? All of the data in the literature has been collected, and all of the side effects of this treatment were evaluated. 263 studies emerged from initial research; only 14 were screened after screening, as they contained sufficient data to evaluate the side effects of treatment. One certain thing emerged; among the contraindications to the treatment of dental bleaching dentinal hypersensitivity could be cited. In fact, one of the most reported undesirable effects regards this problem. Other studies have evaluated pain, color improvement and duration, or patient satisfaction. Dental bleaching is a treatment that aims to improve the aesthetics of our patients; this is also reflected from a psychological point of view and therefore has effects on general health. However, the whitening treatment is not suitable for everyone and must be carefully evaluated by a specialist. This treatment also entails maintenance by the patient and therefore better compliance to normal oral hygiene procedures.
RESUMO
The aim of this paper was to highlight the most widely antibiotic protocols applied to the dental field, especially in the surgical treatment of impacted wisdom teeth. Once these protocols were screened, all the possible advantages or disadvantages for each drug and each posology were recorded in this review. In recent years, the need to use these protocols has been debated in the literature. The data obtained by this review underlined how antibiotic protocols applied to oral surgery treatments only included surgeries performed on patients who did not present other systemic pathologies. The first literature review obtained 140 results, and then after the application of the inclusion criteria, 12 papers were selected. The results showed that the most commonly used protocol involved the use of penicillin and clavulanate, obtaining safe clinical and prophylactic results in the management of infections. This widely used protocol seems to guarantee high predictability and safety. The presented review highlights the current possibility of antibiotic resistance affecting patients due to drug misuse. Further clinical studies are required to state specific guidelines; however, oral surgeons involved in third molar surgery should evaluate the local and general health conditions of the patients before suggesting any drug measures for patients.
RESUMO
This manuscript aims to highlight all the clinical features of the herpes virus, with a particular focus on oral manifestations and in the maxillofacial district about Herpes Simplex Virus-1 (HSV-1) and Herpes Simplex Virus-2 (HSV-2). Oral herpes virus is a very common and often debilitating infectious disease for patients, affecting oral health and having important psychological implications. The collection of relevant data comes from the scientific databases Pubmed, Embase; initially this collection obtained an extremely high number of results, 1415. After applying the inclusion and exclusion criteria, as well as a manual screening, the results included in this review were limited to 14. The results were expressed by evaluating all the signs and symptoms that this pathology entails during the study, paying attention to the characteristics linked to the quality of life and the psychological implications. This pathology has numerous therapies, which often make the healing phase of the manifestations of this viral pathology more comfortable. The therapies currently used for the treatment of this viral infection are pharmacological, topical, systemic, or instrumental, for example with laser devices.
Assuntos
Infecções por Herpesviridae/epidemiologia , Infecções por Herpesviridae/virologia , Herpesviridae , Saúde Bucal , Qualidade de Vida , Antivirais/farmacologia , Antivirais/uso terapêutico , Herpesviridae/classificação , Herpesviridae/efeitos dos fármacos , Herpesviridae/isolamento & purificação , Infecções por Herpesviridae/diagnóstico , Infecções por Herpesviridae/tratamento farmacológico , Humanos , Vigilância em Saúde Pública , Ensaios Clínicos Controlados Aleatórios como Assunto , Avaliação de Sintomas , Resultado do TratamentoRESUMO
The aim of this study was to investigate the possible relationship between malocclusion and body posture anomalies. The original sample involved 127 children (45 males and 82 females) with mixed dentition. Clinical examination of oral cavity was performed by an orthodontist, who recorded molar and canine relationship, cross-bite, lower middle-line deviation, and centric relation (CR) considering mono or bilateral contacts in CR. Orthopedic examination of the body posture was clinically carried out by an orthopedist who detected anomalies such as scoliosis, false scoliosis or paramorphism, kyphosis and lordosis. Of the 127 subjects of the sample, 18 children were orthopedically normal, 80 patients had false scoliosis, 22 scoliosis and 7 showed kyphosis. In our study, we don't consider the 7 patients with kyphosis for the exiguity of the sample; so, our analysis was performed on 120 children (42 males and 78 females). The results obtained revealed that the cross-bite was more frequent when scoliosis became worse. We also found that the relationship between left cross-bite and contralateral side of deviation of the curve of the spine in subjects with scoliosis is statistically significant (p = 0.002). Furthermore, the relationship between lower midline and contralateral side of deviation of the curve of the spine in patients with false scoliosis is statistically significant (p = 0.003). In conclusion, it seems that posture anomalies are correlated to cross-bite and mandible abnormal position.
RESUMO
Cases of correlations between posture and the temporomandibular joint have long been reported in the literature. In particular, occlusal anomalies, and therefore malocclusion, could have negative implications for the spine. The objective of this study was to review the literature and bring to light any correlations between temporomandibular joints (TMJ) and posturology. The literature search was conducted in the PubMed and Embase scientific search engines with the aim of obtaining the most possible results in the initial search, the number of results initially obtained was 263. Subsequently, the inclusion and exclusion criteria were reduced first to 83 and subsequently to manual analysis of the articles, those included remained only 11. The results show a correlation between anomalies of the TMJ and dysfunctions of the vertebral column. Not all the articles considered are in agreement with each other regarding epidemiological data, but surely this study can represent an important starting point for a much more careful evaluation of the dental patient and at the same time for the request for counseling by a dentist in case of postural abnormalities.
RESUMO
Elastics are the simplest device that can be used during a class correction in orthodontics, and despite the simplicity of a latex band, they are very effective and powerful. The resultant inter-maxillary force affects not only the teeth, but even the mandibular position, and consequently the temporomandibular joints (TMJ). The purpose of our work is to simplify the use of elastics, and to reduce the amount of inventory for orthodontists, because there is a lot of merceology available on the market, and different ways of using the elastics. The use of elastics in clinical practice is based on the force extension values, which are given by the manufacturer for the different sizes of the elastics, generally when they are stretched to three times their lumen size. Various configurations allow for the correction of different malocclusions. We propose a new classification and a new device, the elastic selector gauge, in order to allow clinicians to quickly and easily choose the right elastic in all conditions.