RESUMO
The widespread abuse of traditional antibiotics has led to a global rise in antibiotic-resistant bacteria, which give in return unprecedented health risks. Therefore, there is a large and urgent need for the development of new, smart antibacterial agents able to efficiently kill or inhibit bacterial growth. In this study, we investigated the antibacterial activity of S, N-doped Graphene Quantum Dots (GQDs) as a light-triggered antibacterial agent. Gamma irradiation was employed as a tool to achieve one-step modification of GQDs in the presence of L-cysteine amino acid as a source of heteroatoms. X-ray Photoelectron Spectroscopy (XPS), nuclear magnetic resonance (NMR), and zeta potential measurements provided the necessary data to clarify the structure of modified dots and verify the introduction of both S- and N-atoms in GQDs structure, but also severe changes in the aromatic, sp2 domains. Namely, γ-irradiation caused a bonding of S atoms in 1.14 at.% mainly as thiol groups, and N in 1.81 at.% as amino groups, but sp2 contribution in GQD structure was lowered from 63.00 to 4.86 at.%, as measured in dots irradiated at a dose of 200 kGy. Fluorescence quenching measurements showed that L-cysteine-modified dots are able to bind to human serum albumin. The antibacterial activity of GQDs combined with 1 and 6 h of blue light (470 nm) irradiation was tested against 8 bacterial strains. GQD-cys-25 sample provided the best results, with minimum inhibitory concentration (MIC) as low as 125 µg/mL against S. aureus, E. faecalis, and E. coli after only 1 h of blue light exposure.
Assuntos
Grafite , Pontos Quânticos , Humanos , Pontos Quânticos/química , Grafite/farmacologia , Grafite/química , Cisteína , Escherichia coli , Staphylococcus aureus , Antibacterianos/farmacologiaRESUMO
Extracellular vesicles (EVs) represent pivotal mediators in cell-to-cell communication. They are lipid-membranous carriers of several biomolecules, which can be produced by almost all cells. In the current Era of precision medicine, EVs gained growing attention thanks to their potential in both biomarker discovery and nanotherapeutics applications. However, current technical limitations in isolating and/or detecting EVs restrain their standard use in clinics. This review explores all the state-of-the-art analytical technologies which are currently overcoming these issues. On one end, several innovative optical-, electrical-, and spectroscopy-based detection methods represent advantageous label-free methodologies for faster EV detection. On the other end, microfluidics-based lab-on-a-chip tools support EV purification from low-concentrated samples. Altogether, these technologies will strengthen the routine application of EVs in clinics.
RESUMO
The large number of deaths induced by carcinoma and infections indicates that the need for new, better, targeted therapy is higher than ever. Apart from classical treatments and medication, photodynamic therapy (PDT) is one of the possible approaches to cure these clinical conditions. This strategy offers several advantages, such as lower toxicity, selective treatment, faster recovery time, avoidance of systemic toxic effects, and others. Unfortunately, there is a small number of agents that are approved for usage in clinical PDT. Novel, efficient, biocompatible PDT agents are, thus, highly desired. One of the most promising candidates is represented by the broad family of carbon-based quantum dots, such as graphene quantum dots (GQDs), carbon quantum dots (CQDs), carbon nanodots (CNDs), and carbonized polymer dots (CPDs). In this review paper, these new smart nanomaterials are discussed as potential PDT agents, detailing their toxicity in the dark, and when they are exposed to light, as well as their effects on carcinoma and bacterial cells. The photoinduced effects of carbon-based quantum dots on bacteria and viruses are particularly interesting, since dots usually generate several highly toxic reactive oxygen species under blue light. These species are acting as bombs on pathogen cells, causing various devastating and toxic effects on those targets.
RESUMO
Due to the increasing number of bacterial infections and the development of resistivity toward antibiotics, new materials and approaches for treatments must be urgently developed. The production of new materials should be ecologically friendly considering overall pollution with chemicals and economically acceptable and accessible to the wide population. Thus, the possibility of using biocompatible graphene quantum dots (GQDs) as an agent in photodynamic therapy was studied. First, dots were obtained using electrochemical cutting of graphite. In only one synthetic step using gamma irradiation, GQDs were doped with N atoms without any reagent. Obtained dots showed blue photoluminescence, with a diameter of 19-89 nm and optical band gap of 3.23-4.73 eV, featuring oxygen-containing, amino, and amide functional groups. Dots showed antioxidative activity; they quenched â¢OH at a concentration of 10 µg·mL-1, scavenged DPPH⢠radicals even at 5 µg·mL-1, and caused discoloration of KMnO4 at 30 µg·mL-1. Under light irradiation, dots were able to produce singlet oxygen, which remained stable for 10 min. Photoinduced effects by GQDs were studied on several bacterial strains (Listeria monocytogenes, Bacillus cereus, clinical strains of Streptococcus mutans, S. pyogenes, and S. sangunis, Pseudomonas aeruginosa, and one yeast strain Candida albicans) but antibacterial effects were not noticed.
RESUMO
Structural modification of different carbon-based nanomaterials is often necessary to improve their morphology and optical properties, particularly the incorporation of N-atoms in graphene quantum dots (GQDs). Here, a clean, simple, one-step, and eco-friendly method for N-doping of GQDs using gamma irradiation is reported. GQDs were irradiated in the presence of the different ethylenediamine (EDA) amounts (1 g, 5 g, and 10 g) and the highest % of N was detected in the presence of 10 g. N-doped GQDs emitted strong, blue photoluminescence (PL). Photoluminescence quantum yield was increased from 1.45, as obtained for non-irradiated dots, to 7.24% for those irradiated in the presence of 1 g of EDA. Modified GQDs were investigated as a PL probe for the detection of insecticide Carbofuran (2,2-Dimethyl-2,3-dihydro-1-benzofuran-7-yl methylcarbamate) and herbicide Amitrole (3-amino-1,2,4-triazole). The limit of detection was 5.4 µmol L-1 for Carbofuran. For the first time, Amitrole was detected by GQDs in a turn-off/turn-on mechanism using Pd(II) ions as a quenching agent. First, Pd(II) ions were quenched (turn-off) PL of GQDs, while after Amitrole addition, PL was recovered linearly with Amitrole concentration (turn-on). LOD was 2.03 µmol L-1. These results suggest that modified GQDs can be used as an efficient new material for Carbofuran and Amitrole detection. Furthermore, the phototoxicity of dots was investigated on both Gram-positive and Gram-negative bacterial strains. When bacterial cells were exposed to different GQD concentrations and illuminated with light of 470 nm wavelength, the toxic effects were not observed.
RESUMO
During the last 20 years, the scientific community has shown growing interest towards carbonaceous nanomaterials due to their appealing mechanical, thermal, and optical features, depending on the specific nanoforms. Among these, graphene quantum dots (GQDs) recently emerged as one of the most promising nanomaterials due to their outstanding electrical properties, chemical stability, and intense and tunable photoluminescence, as it is witnessed by a booming number of reported applications, ranging from the biological field to the photovoltaic market. To date, a plethora of synthetic protocols have been investigated to modulate the portfolio of features that GQDs possess and to facilitate the use of these materials for target applications. Considering the number of publications and the rapid evolution of this flourishing field of research, this review aims at providing a broad overview of the most widely established synthetic protocols and offering a detailed review of some specific applications that are attracting researchers' interest.
RESUMO
Nowadays, a larger number of aggressive and corrosive chemical reagents as well as toxic solvents are used to achieve structural modification and cleaning of the final products. These lead to the production of residual, waste chemicals, which are often reactive, cancerogenic, and toxic to the environment. This study shows a new approach to the modification of graphene quantum dots (GQDs) using gamma irradiation where the usage of reagents was avoided. We achieved the incorporation of S and N atoms in the GQD structure by selecting an aqueous solution of L-cysteine as an irradiation medium. GQDs were exposed to gamma-irradiation at doses of 25, 50 and 200 kGy. After irradiation, the optical, structural, and morphological properties, as well as the possibility of their use as an agent in bioimaging and photodynamic therapy, were studied. We measured an enhanced quantum yield of photoluminescence with the highest dose of 25 kGy (21.60%). Both S- and N-functional groups were detected in all gamma-irradiated GQDs: amino, amide, thiol, and thione. Spin trap electron paramagnetic resonance showed that GQDs irradiated with 25 kGy can generate singlet oxygen upon illumination. Bioimaging on HeLa cells showed the best visibility for cells treated with GQDs irradiated with 25 kGy, while cytotoxicity was not detected after treatment of HeLa cells with gamma-irradiated GQDs.
RESUMO
The continuous progress of printing technologies over the past 20 years has fueled the development of a plethora of applications in materials sciences, flexible electronics, and biotechnologies. More recently, printing methodologies have started up to explore the world of Artificial Biology, offering new paradigms in the direct assembly of Artificial Biosystems (small condensates, compartments, networks, tissues, and organs) by mimicking the result of the evolution of living systems and also by redesigning natural biological systems, taking inspiration from them. This recent progress is reported in terms of a new field here defined as Printing Biology, resulting from the intersection between the field of printing and the bottom up Synthetic Biology. Printing Biology explores new approaches for the reconfigurable assembly of designed life-like or life-inspired structures. This work presents this emerging field, highlighting its main features, i.e., printing methodologies (from 2D to 3D), molecular ink properties, deposition mechanisms, and finally the applications and future challenges. Printing Biology is expected to show a growing impact on the development of biotechnology and life-inspired fabrication.
Assuntos
Materiais Biomiméticos , Biotecnologia , Biologia Sintética , Materiais Biomiméticos/química , Materiais Biomiméticos/normas , Biotecnologia/tendências , Impressão Tridimensional , Biologia Sintética/tendênciasRESUMO
Organic Photovoltaics (OPVs) based on Bulk Heterojunction (BHJ) blends are a mature technology. Having started their intensive development two decades ago, their low cost, processability and flexibility rapidly funneled the interest of the scientific community, searching for new solutions to expand solar photovoltaics market and promote sustainable development. However, their robust implementation is hampered by some issues, concerning the choice of the donor/acceptor materials, the device thermal/photo-stability, and, last but not least, their morphology. Indeed, the morphological profile of BHJs has a strong impact over charge generation, collection, and recombination processes; control over nano/microstructural morphology would be desirable, aiming at finely tuning the device performance and overcoming those previously mentioned critical issues. The employ of compatibilizers has emerged as a promising, economically sustainable, and widely applicable approach for the donor/acceptor interface (D/A-I) optimization. Thus, improvements in the global performance of the devices can be achieved without making use of more complex architectures. Even though several materials have been deeply documented and reported as effective compatibilizing agents, scientific reports are quite fragmentary. Here we would like to offer a panoramic overview of the literature on compatibilizers, focusing on the progression documented in the last decade.
Assuntos
Modelos Químicos , Energia SolarRESUMO
Self-assembled monolayers (SAMs) deposited on bottom electrodes are commonly used to tune charge carrier injection or blocking in optoelectronic devices. Beside the enhancement of device performance, the fabrication of multifunctional devices in which the output can be modulated by multiple external stimuli remains a challenging target. In this work, we report the functionalization of an indium tin oxide (ITO) electrode with a SAM of a diarylethene derivative designed for optically control the electronic properties. Following the demonstration of dense SAM formation and its photochromic activity, as a proof-of-principle, an organic light-emitting diode (OLED) embedding the light-responsive SAM-covered electrode was fabricated and characterized. Optically addressing the two-terminal device by irradiation with ultraviolet light doubles the electroluminescence. The original value can be restored reversibly by irradiation with visible light. This expanded functionality is based on the photoinduced modulation of the electronic structure of the diarylethene isomers, which impact the charge carriers' confinement within the emissive layer. This approach could be successfully exploited in the field of opto-communication technology, for example to fabricate opto-electronic logic circuits.
RESUMO
Upon light-induced isomerization, diarylethenes (DAEs) equipped with reactive aldehyde moieties rearrange selectively in the presence of amines, accompanied by decoloration. In a comprehensive study, the probe structure was optimized with regard to its inherent reactivity in the nucleophile-triggered rearrangement reaction. Detailed structure-reactivity relationships could be derived, in particular with regard to the type of integrated (het)aryl moieties as well as the location of the formyl residue, and the probes' intrinsic reactivity with primary and secondary amines was optimized. Utilizing an ancillary base, the initially formed rearrangement product can engage in a subsequent catalytic cycle, leading to an amplified decoloration process. This additional catalytic pathway allows us to enhance the sensitivity of our method and successfully discriminate between amines and thiols. Moreover, probes that exhibit strong analyte-induced fluorescence modulation have been designed to further decrease the detection limit by using a more sensitive read-out. The optimized DAE probes are promising molecular components for future programmable sensing materials and devices.
RESUMO
Hydrogels are soft materials that have found multiple applications in biomedicine and represent a good platform for the introduction of molecular switches and synthetic machines into macromolecular networks. Tuning their mechanical properties reversibly with light is appealing for a variety of advanced applications and has been demonstrated in the past; however, their activation typically requires the use of UV light, which displays several drawbacks related to its damaging character and limited penetration in tissues and materials. This study circumvents this limitation by introducing all-visible ortho-fluoroazobenzene switches into a hydrophilic network, which, as a result, can be activated with green or blue light. Photoisomerization of the photochromic moieties is accompanied by a reversible tuning of the elastic modulus. The translation of molecular isomerization within the network into macroscopic modulation of its mechanical properties is attributed to different aggregation tendencies of the E and Z isomers of the azobenzene derivatives.
Assuntos
Compostos Azo/química , Hidrogéis/química , Luz , Elasticidade , Interações Hidrofóbicas e Hidrofílicas , Estrutura Molecular , EstereoisomerismoRESUMO
Some rare indigo derivatives have been known for a long time to be photochromic upon irradiation with red light, which should be advantageous for many applications. However, the absence of strategies to tune their thermal half-lives by modular molecular design as well as the lack of proper synthetic methods to prepare a variety of such molecules from the parent indigo dye have so far precluded their use. In this work, several synthetic protocols for N-functionalization have been developed, and a variety of N-alkyl and N-aryl indigo derivatives have been prepared. By installation of electron-withdrawing substituents on the N-aryl moieties, the thermal stability of the Z-isomers could be enhanced while maintaining the advantageous photoswitching properties upon irradiation with red light (660 nm LED). Both experimental data and computational results suggest that the ability to tune thermal stability without affecting the dyes' absorption maxima originates from the twisted geometry of the N-aryl groups. The new indigo photoswitches reported are expected to have a large impact on the development of optical methods and applications in both life and material sciences.
RESUMO
Our new, simple, and accurate colorimetric method is based on diarylethenes (DAEs) for the rapid detection of a wide range of primary and secondary amines. The probes consist of aldehyde- or ketone-substituted diarylethenes, which undergo an amine-induced decoloration reaction, selectively to give the ring-closed isomer. Thus, these probes can be activated at the desired moment by light irradiation, with a sensitivity that allows the detection of amines at concentrations as low as 10-6 m in solution. In addition, the practical immobilization of DAEs on paper makes it possible to detect biogenic amines, such as cadaverine, in the gas phase above a threshold of 12â ppbv within 30â seconds.
RESUMO
Among bistable photochromic molecules, diarylethenes (DAEs) possess the distinct feature that upon photoisomerization they undergo a large modulation of their π-electronic system, accompanied by a marked shift of the HOMO/LUMO energies and hence oxidation/reduction potentials. The electronic modulation can be utilized to remote-control charge- as well as energy-transfer processes and it can be transduced to functional entities adjacent to the DAE core, thereby regulating their properties. In order to exploit such photoswitchable systems it is important to precisely adjust the absolute position of their HOMO and LUMO levels and to maximize the extent of the photoinduced shifts of these energy levels. Here, we present a comprehensive study detailing how variation of the substitution pattern of DAE compounds, in particular using strongly electron-accepting and chemically stable trifluoromethyl groups either in the periphery or at the reactive carbon atoms, allows for the precise tuning of frontier molecular orbital levels over a broad energy range and the generation of photoinduced shifts of more than 1â eV. Furthermore, the effect of different DAE architectures on the transduction of these shifts to an adjacent functional group is discussed. Whereas substitution in the periphery of the DAE motif has only minor implications on the photochemistry, trifluoromethylation at the reactive carbon atoms strongly disturbs the isomerization efficiency. However, this can be overcome by using a nonsymmetrical substitution pattern or by combination with donor groups, rendering the resulting photoswitches attractive candidates for the construction of remote-controlled functional systems.
RESUMO
Herein, the ability of gamma irradiation to enhance the photoluminescence properties of graphene quantum dots (GQDs) was investigated. Different doses of γ-irradiation were used on GQDs to examine the way in which their structure and optical properties can be affected. The photoluminescence quantum yield was increased six times for the GQDs irradiated with high doses compared to the nonirradiated material. Both photoluminescence lifetime and values of optical band gap were increased with the dose of applied gamma irradiation. In addition, the exploitation of the gamma-irradiated GQDs as photosensitizers was examined by monitoring the production of singlet oxygen under UV illumination. The main outcome was that the GQDs irradiated at lower doses act as better photoproducers than the ones irradiated at higher doses. These results corroborate that the structural changes caused by gamma irradiation have a direct impact on GQD ability to produce singlet oxygen and their photostability under prolonged UV illumination. This makes low-dose irradiated GQDs promising candidates for photodynamic therapy.
Assuntos
Raios gama , Grafite/química , Luminescência , Fotoquimioterapia/métodos , Pontos Quânticos/química , Espectroscopia de Ressonância de Spin Eletrônica , Microscopia de Força Atômica , Tamanho da Partícula , Fármacos Fotossensibilizantes/farmacologia , Oxigênio Singlete/química , Espectrofotometria Ultravioleta , Espectroscopia de Infravermelho com Transformada de FourierRESUMO
Five perylene bisimide (PBI) derivatives were designed and synthesized, on the basis of quantum-chemical calculations. The influence of halogen substituents on the shape and energy of the frontier orbitals and the Raman spectra were calculated, in the prospect use in surface-enhanced resonance Raman scattering (SERRS) studies. The corresponding experiments confirmed a very strong SERRS response in the presence of pristine (i.e., uncoated) gold nanoparticles. These spectra can be used for multiplexing measurements, namely measurements in which, by using a single laser excitation, one can recognize the simultaneous presence of several analytes.
Assuntos
Imidas/química , Perileno/análogos & derivados , Análise Espectral Raman/instrumentação , Estrutura Molecular , Perileno/químicaRESUMO
[(N,N'-Bis(2-(trimethylammonium)ethylene) perylene 3,4,9,10-tetracarboxylic acid bisimide)(PF6)2] (1) was observed to spontaneously adsorb on nanocrystalline WO3 surfaces via aggregation/hydrophobic forces. Under visible irradiation (λ > 435 nm), the excited state of 1 underwent oxidative quenching by electron injection (kinj > 10(8) s(-1)) to WO3, leaving a strongly positive hole (Eox ≈ 1.7 V vs SCE), which allows to drive demanding photo-oxidation reactions in photoelectrochemical cells (PECs). The casting of IrO2 nanoparticles (NPs), acting as water oxidation catalysts (WOCs) on the sensitized electrodes, led to a 4-fold enhancement in photoanodic current, consistent with hole transfer from oxidized dye to IrO2 occurring on the microsecond time scale. Once the interaction of the sensitizer with suitable WOCs is optimized, 1/WO3 photoanodes may hold potentialities for the straightforward building of molecular level devices for solar fuel production.
Assuntos
Imidas/química , Nanopartículas/química , Óxidos/química , Perileno/análogos & derivados , Processos Fotoquímicos , Luz Solar , Tungstênio/química , Água/química , Transporte de Elétrons , Modelos Moleculares , Conformação Molecular , Perileno/químicaRESUMO
A novel bis-pyrene tweezer anchored on a rigid polyoxometalate scaffold fosters a unique interplay of hydrophobic and electrostatic supramolecular interactions, to shape carbon nanostructures (CNSs)-based extended architectures.