RESUMO
Organic waste management is challenging in low-middle income countries. Environmental impacts and high management costs affect the sustainable development of cities, an issue that is exacerbated by the lack of social involvement. The research conducted in Iran aims to assess the benefits of organic waste home composting in Shiraz to improve solid waste management (SWM) sustainability. The introduction of a pilot project to assess home composting systems was described, together with an economic, social and environmental analysis. The current SWM system (S0) has been compared with the new strategy proposed (S1), where home composting is considered to be introduced to collect about 10% of the municipal solid waste generated in a 10-year horizon. An economic balance related to the capital costs and operational costs of both systems was introduced, in parallel with a life cycle assessment (LCA) of the SWM system, and a questionnaire survey of the local population. Results showed that S1 leads to around 5% economic savings for the municipality due to the avoidance of organic waste transportation and disposal. Environmental benefits include a lowering of CO2-Eq emissions of about 19,076 tonnes year-1. In addition, about 28% of the interviewed (n = 319) agreed to employ the home composting system at home (CI 5.5%, 95% of confidence level) supporting the theory that about 10% of the organic waste can be segregated and home-composted. The research underlines that home composting can contribute to improve the sustainability of SWM systems in developing countries.
RESUMO
The study focuses on an Italian composting plant and aims to investigate the impact of the presence of plastic impurities in the collected biowaste on the environmental and economic performance of the plant. The study is divided into two main steps: firstly, a material flow analysis was conducted to quantify the number of impurities (e.g., conventional plastics and compostable plastics) before and after the composting process. Secondly, a life cycle assessment (LCA) and a complementary life cycle costing (LCC) of the composting process were conducted. The results of the material flow analysis confirmed the initial assumption that conventional plastic remains almost constant before and after the composting treatment, while compostable plastic almost disappears. As far as the life cycle analyses are concerned, the most environmentally damaging phases of the process were the shredding and mixing phases, while the operating costs (OPEX) contributed the most to the total annual costs of the company. Finally, a further scenario analysis was performed, assuming that the plastic contaminants in the treated biowaste consisted exclusively of compostable plastics. The comparison with this ideal scenario can support decision-makers to understand the potential improvements achievable by addressing the presence of plastic impurities in the biowaste. The results show that the treatment of plastic impurities causes relevant environmental and economic impacts, being responsible for 46% of the total waste to treat at the end of the process, almost 7% of the total annual costs covered by the plant owners, and about 30% of all negative externalities.
Assuntos
Plásticos Biodegradáveis , Compostagem , Gerenciamento de Resíduos , Animais , Análise Custo-Benefício , Estágios do Ciclo de VidaRESUMO
The road and construction sectors consume a large number of natural resources and energy, contributing significantly to waste generation and greenhouse gas emissions (GHG). The use of recycled aggregate from construction and demolition waste as a substitute for virgin aggregate is a current practice in the construction of new road sections. Additionally, in recent years, there has been an increasing focus on finding alternatives to bitumen for binders used in asphalt mixes. This study investigates and compares the impacts associated with two porous asphalt mixtures produced with CDW aggregates, virgin aggregates, and a polyolefin-based synthetic transparent binder through an LCA methodology. A cradle-to-gate approach was employed. Model characterization for calculating the potential environmental impacts of each porous asphalt mixture was performed using the ReCipe 2016 assessment method at the midpoint and endpoint levels. The results are presented with reference to a baseline scenario corresponding to a porous asphalt mixture, confirming the benefits associated with the use of recycled aggregates and in some cases the benefits of not using bitumen-based binders. This work contributes to the understanding of the importance of choosing the least environmentally damaging solution during the production or rehabilitation of road pavement infrastructure.
RESUMO
Waste collection is the first step of waste management, and its characteristics impact workers' health and safety. Arising out of the challenge for waste collection operators to design sustainable systems of work, the authors review the literature on ergonomics and socio-economic sustainability and design a theoretical framework for assessing the sustainability of waste collection. The framework quantitatively assess the impact of the door-to-door collection system on the health and safety of the workers to provide indications to waste collection operators on how the load carried by workers can be minimised and the economic and social sustainability can be improved. As a case study, this paper investigates the musculoskeletal disorders derived from the manual material handling of waste containers affecting the workers in charge of door-to-door sorted collection of paper waste with the goal of optimizing the workers well-being and overall waste collection system performance The research study was conducted in collaboration with a company which operates in solid waste collection for Italian municipalities. For this purpose, the ergo-quality level of two paper waste collection systems is evaluated. For each system, ten scenarios of door-to-door paper waste collection are considered. The analysis is complemented by an economic analysis, which estimates the costs associated with the collection system under consideration, and a social life-cycle assessment. Results suggest that using 120-litres capacity bins would effectively improve ergonomics and optimise the costs of the investigated activity. More specifically, due to mechanised collection, the more limited number of lifting and carrying operations would expose the workers to lower ergonomic risk.
Assuntos
Eliminação de Resíduos , Gerenciamento de Resíduos , Humanos , Análise Custo-Benefício , Resíduos Sólidos , Gerenciamento de Resíduos/métodos , Cidades , ErgonomiaRESUMO
Effective and efficient urban waste management systems (WMSs) are a cornerstone for a sustainable society. Life cycle costing (LCC) provides a useful framework for the joint analysis of economic and environmental impacts of a WMS, by considering both financial and external costs. The present study applies the methodology of societal LCC to the WMS of the Italian region of Emilia-Romagna to provide a case study on how the available information on waste flows and budget costs of a real WMS can be used to obtain an estimate of the total cost of waste management, including externalities. The results evidence that the main source of negative externality in the analyzed WMS is the transportation of waste, with only a minor role of external burdens due to incinerators and landfills. However, the positive externality resulting from recycling more than compensates those impacts, leading to a net external benefit associated to the WMS. The contribution of both uncertain unit external costs and environmental benefits imputable to recycled materials to the overall uncertainty of the result is systematically investigated by parametric uncertainty analysis. The most critical parameters in determining the sensitivity of the result are the monetary values attributed to primary energy consumption and CO2 emissions, together with assumptions on energy savings related to recycling. Eventually, it is shown how the developed LCC model can be used as decision-support tool to preliminarily investigate the implications of alternative management options on the financial and external costs of the WMS.
Assuntos
Eliminação de Resíduos , Gerenciamento de Resíduos , Animais , Incineração , Itália , Estágios do Ciclo de Vida , ReciclagemRESUMO
GRAPHICAL ABSTRACT: [Formula: see text].
Assuntos
Eliminação de Resíduos , Gerenciamento de Resíduos , Resíduos Sólidos/análiseRESUMO
The level of One Health (OH), or "One Health-ness," of health interventions has been defined as the capacity to operate according to six dimensions concerning OH operations and OH infrastructures, respectively (thinking, planning, and working; and information sharing, reciprocal learning, and systemic organization). Although health initiatives and research increasingly claim their orientation toward OH, such a capacity is rarely assessed. The objective of this study is to evaluate the One Health-ness of the academic team of the University of Bologna (UNIBO Team) working in the "ELEPHANT" project (Empowering universities' Learning and rEsearch caPacities in the one Health Approach for the maNagement of animals at the wildlife, livestock and human interface in SouTh Africa). This project involves universities, six from South Africa and two from Europe, and aims at embedding OH in research and learning to enable the control of diseases at the human, animal, and environmental interface, and to emphasize the interests of local African communities with wildlife conservation. The methodology adopts the NEOH method, developed in 2018 by the EU-COST Action, "Network for the Evaluation of One Health." The approach is based on questionnaires delivered to participants, which focus on the six OH dimensions, and then translate answers into quantitative metrics through the OH Index (OHI) and the OH Ratio (OHR). The following two evaluation levels are foreseen: the whole project and the single partner institutions. The evaluations are carried on in parallel, with preliminary, mid-term, and final assessments, to monitor the efficacy of the project actions. The preliminary evaluation of the UNIBO Team resulted in the OHI of 0.23 and the OHR of 1.69 which indicate a low degree of OH-ness and an imbalance between OH operation and OH infrastructure. The UNIBO case study will be the baseline for the evaluation of the other partner institutions involved in the ELEPHANT project. This type of evaluation can support the implementation of OH practices inside a project and underpin the strategies that allow to achieving more effective results. Any improvement in the OH-ness of each single academic team can be also considered as a result of the ELEPHANT project, thus showing its multiplier effect in the context.
Assuntos
Saúde Única , Animais , Europa (Continente) , Humanos , África do Sul , UniversidadesRESUMO
There is an urgent need to assess European citizens' perspective regarding their plastic consumption and to evaluate their awareness of the direct and indirect effect of plastics on human health in order to influence current behavior trends. In this study, the evaluation has been cross-related with scientific facts, with the final aim of detecting the most recommendable paths in increasing human awareness, reducing plastic consumption, and consequently impacting human health. A statistical analysis of quantitative data, gathered from 1000 European citizens via an online survey in the period from May to June 2020, showed that a general awareness about the direct impact of plastic consumption and contamination (waste) on human health is high in Europe. However, only a few participants (from a higher educational group) were aware of the indirect negative effects that oil extraction and industrial production of plastic can have on human health. This finding calls for improved availability of this information to general public. Despite the participants' positive attitude toward active plastic reduction (61%), plastic consumption on a daily basis is still very high (86%). The most common current actions toward plastic reduction are plastic bag usage, reusage, or replacement with sustainable alternatives (e.g., textile bags) and selecting products with less plastic packaging. The participants showed important criticism toward the information available to the general public about plastics and health. This awareness is important since significant relation has been found between the available information and the participants' decisions on the actions they might undertake to reduce plastic consumption. The study clearly showed the willingness of the participants to take action, but they also requested to be strongly supported with joint efforts from government, policies, and marketing, defining it as the most successful way toward implementing these changes.
Assuntos
Plásticos , Embalagem de Produtos , Europa (Continente) , Humanos , Inquéritos e QuestionáriosRESUMO
Waste prevention (WP) can play a significant role in pursuing both sustainable development and decarbonization. Nevertheless, a general method to monitor and evaluate WP does not exist yet. This study proposes a framework for the sustainability assessment and prioritisation of waste prevention measures (WPMs), at consumption level. Firstly, some WPMs are selected, based on relevant criteria. Secondly, their impacts are assessed, in terms of environmental, economic, and social sustainability, in a life-cycle perspective. Then, a set of significant effectiveness and efficiency indicators are chosen and calculated. Finally, an algorithm for the prioritisation is proposed. This methodological approach might be useful to guide the financing choices of the public decision-makers, to assess and promote WPMs, and to develop WP strategies. Moreover, the results can be used in waste management planning and to motivate local actors through benchmarking. The designed framework has been applied to 17 projects implemented by Municipalities in the Emilia-Romagna Region (Italy), as case study. The projects, whose aim is the reduction of waste from plastic disposable goods, can be grouped in three different categories: i) drinking water dispensers in towns/cities, ii) drinking water dispensers in schools and iii) replacement of disposable goods in school canteens. The project category of drinking water dispensers in towns proved to be the most sustainable one, achieving a score of 0,4265, while the other categories scored around 0,28. The study confirms that WP should be promoted, despite being very difficult to monitor. The political institutions should invest in implementing a specific monitoring system, also able to reveal potential integration of WP strategies with other policy areas. Finally, an improved institutional framework might help the Municipalities in overcoming barriers to the identification and implementation of WPMs, by allowing for coordination and networking of individual projects and by encouraging the spread of good practices.
RESUMO
The evidence of the impact of the mismanagement of plastic goods in the environment has captured the attention of scientists, policy makers and manufacturers. Urgent measures, regarding a combination of preventing plastic use and massively improving waste management, have been acclaimed by different stakeholders with the common goal to make a more resilient and competitive plastic industry. European Commission has pledged itself publishing the first EU-wide policy framework on plastics. The new recycling targets and calculation method put under pressure the current waste management system (WMS), characterized by fragmentation in responsibilities and underperforming cost-benefit balance. In addition, the public-private governance and the increasing number in waste consortia and platforms contribute to make the waste streams traceability challenging. The following study, resulting from a collaboration between the University of Bologna (UNIBO), the Emilia-Romagna Region (ERR), and the Regional Agency for Prevention, Environment and Energy (ARPAE), investigates the current panorama of plastic waste recycling system in ERR (Italy) with the aim to find out to what extent the current performance fulfils the future scenario established by the European Commission. The market of secondary plastics (SPs) has been investigated as well. The secondary resources, which are no longer waste, are not registered and monitored by official data collection scheme. Data extrapolated from official waste databases are integrated with results coming from individual questionnaire submitted to local recyclers. The identification of the main polymeric streams and, therefore, the exploitation of economic potential represent the preliminary actions to strategically plan an after-use plastic economy whose main goal is having all recyclable and/or recycled plastic packaging by 2030.
Assuntos
Plásticos , Gerenciamento de Resíduos , Itália , Embalagem de Produtos , ReciclagemRESUMO
Over the last 50 years, conventional fossil-based plastics have become an integral part of our everyday lives. Apart from their low production costs, this is due to a number of their unique properties, including durability, strength, lightness, electrical and thermal insulation, resistance to chemicals and corrosion. The production of plastics has increased from 1.5 million metric tons in 1950 to 359 million metric tons in 2018. Of this total, 61.8 million metric tons were produced in Europe. There are various problems associated with plastic use and disposal that pose a serious threat to both the physical environment and human health. Since public behaviour plays a key role when it comes to the use of plastic, this paper reports on a study that focused on an assessment of attitudes towards plastics and bioplastics in Europe. The results showed that packaging is the most frequent modality of plastic used among participants. In addition, majority of participants are aware that plastic waste can affect environment and human health and therefore segregate and properly dispose plastics. Also, even though most respondents were aware of the environmental problems related to plastic use and showed a positive inclination towards using bioplastic materials, their limited availability and lack of relevant information about bioplastics pose a problem for wider use. Departing from the assumption that the public attitude is a determining factor in the consumption of plastics as a whole and bioplastics in particular, this paper also sheds some light on the current situation, identifying some trends and information gaps which should be addressed in order to encourage a more rational use of plastics in Europe.
Assuntos
Plásticos , Embalagem de Produtos , Atitude , Europa (Continente) , HumanosRESUMO
This article focuses on quantitative prevention of municipal solid waste among the 28 member countries of the European Union. A strict definition of waste prevention is used, including waste avoidance, waste reduction at source or in process, and product reuse, while recycling is outside the scope of this article. In order to provide a solid overview of the European situation, the study selected six countries (Belgium, Bulgaria, Italy, the Netherlands, Romania and Spain). Several selection requirements have been considered, such as geographic location or municipal solid waste per capita production trends from 1995 to 2017. A review of prevention programmes and other national strategic documents has been conducted. Extended producer responsibility, Pay-As-You-Throw schemes, Deposit-Refund Systems and Environmental Taxes implementation among the selected countries have been studied in order to understand how these market-based instruments can be used for the sake of waste prevention. Each market-based instrument has been further analysed using the Drivers Pressures State Impact Response model. Based on the results of this study, the effectiveness of market-based instruments implementation is strictly related to the context they are enforced in. It is particularly important to tailor the market-based instruments based on the implementation area. Nevertheless, market-based instruments, which are now mostly meant to boost the recycling sector of the considered Member States, should be designed to improve waste prevention performances, ensuring the achievement of the highest level of waste hierarchy promoted by the European Union.
Assuntos
Eliminação de Resíduos , Gerenciamento de Resíduos , Bélgica , Bulgária , União Europeia , Itália , Países Baixos , Reciclagem , Romênia , Resíduos Sólidos , EspanhaRESUMO
Pesticides are commonly applied in conventional agricultural systems, but they can lead to serious environmental contamination. The calculation of on-field pesticide emissions in Life Cycle Assessment (LCA) studies is challenging, because of the difficulty in the calculation of the fate of pesticides and, therefore, several literature approaches based on different dispersion models have been developed. PestLCI 2.0 model can provide simultaneous assessment of the emission fractions of a pesticide to air, surface water and groundwater based on many parameters. The goal of this study is to exploit the extent of PestLCI 2.0 sensitivity to soil variations, with the ultimate goal of increasing the robustness of the modelling of pesticide emissions in LCA studies. The model was applied to maize cultivation in an experimental farm in Northern Italy, considering three tests, which evaluated the distribution of pesticides among environmental compartments obtained considering different soil types. Results show that small variations in soil characteristics lead to great variation of PestLCI 2.0, with a significance that depends on the type of environmental compartment. The compartment most affected by soil variations was groundwater, whereas surface waters were dominated by meteorological conditions, pesticides' physical and chemical properties and wind drift, which are independent from soil characteristics. Therefore, the use of specific soil data in PestLCI 2.0 results in the availability of a comprehensive set of emission data in the different compartments, which represents a relevant input for the inventory phase of LCA studies and can increase their robustness. Nevertheless, PestLCI 2.0 requires a great effort for the data collection and a specific expertise in soil science for interpreting the results. Moreover, characterization factors for pesticide groundwater emissions should be developed, in order to exploit these detailed results in the impact assessment phase, Finally, the study provides further insights into future improvement of PestLCI 2.0.
RESUMO
Indoor air quality (IAQ) management in public spaces is assuming a remarkable importance. Busy environments, like airport terminals, are currently regarded as possible hotspots and IAQ is a crucial element for passengers and staff protection, as well as a key aspect of airport passenger experience. A one-month monitoring period has been performed on IAQ in the airport of Bologna (Italy), as prototypal example of large regional airport. Four strategic areas within the airport have been equipped with electronic monitoring platforms, including different contaminants and two microclimatic sensors. Data suggest that daily variation in IAQ parameters typically follow the activity pattern of the different environments under study (i.e., passengers' flows) for gaseous contaminants, where particulate matter counts oscillate in a definite range, with a significant role played by ventilation system. Gaseous contaminants show a correlation between indoor and outdoor concentrations, mainly due to airside activities. Micro-climatic comfort parameters have been tested to match with standards for commercial environments. As results appears in line with typical households IAQ values, the current air ventilation system appears to be adequate. Nevertheless, an integrated air management system, based on real-time monitoring, would lead to optimization and improvement in environmental and economical sustainability.
RESUMO
Most paper industry waste is in the form of sludge from paper production and recycle process paper. There has been an increasing use of paper sludge in environmental restoration, a practice that requires particular attention. This issue presents a case which demonstrates how the biogas production related to this kind of recovery system can represent a problem for environmental protection and public health. The case history relates to a former quarry area restored by means of paper sludge. After the filling, a substantial quantity of biogas was produced, with an external diffusion to sensible target as well. Initial investigations showed that the area was characterized by a large amount of paper mill sludge made unstable by anaerobic conditions. To date there are no proven technologies for this kind of treatment. In this case, for safety and naturalization as agricultural area, new methods of bioremediation were used and, in particular, an innovative physical, mechanical and biological intervention, based on bio-stabilization of paper mill sludge. The treatment is site-specific, based on the in-site paper sludge biostabilisation. To complete the intervention and in order to demonstrate its validity an important monitoring activity was performed, testing all the phases affected by the biological transformation.
Assuntos
Papel , Esgotos/análise , Aerobiose , Biodegradação Ambiental , Biocombustíveis/análise , Eletricidade , Gases/análise , Oxigênio/análise , Projetos Piloto , Solo/análiseRESUMO
Multi-criteria analysis (MCA) is a family of decision-making tools that can be used in strategic environmental assessment (SEA) procedures to ensure that environmental, social and economic aspects are integrated into the design of human development strategies and planning, in order to increase the contribution of the environment and natural resources to poverty reduction. The aim of this paper is to highlight the contribution of a particular multi-criteria technique, the analytic hierarchy process (AHP), in two stages of the SEA procedure applied to water programmes in developing countries: the comparison of alternatives and monitoring. This proposal was validated through its application to a case study in Brazilian semi-arid region. The objective was to select and subsequently monitor the most appropriate programme for safe water availability. On the basis of the SEA results, a project was identified and implemented with successful results. In terms of comparisons of alternatives, AHP meets the requirements of human development programme assessment, including the importance of simplicity, a multidisciplinary and flexible approach, and a focus on the beneficiaries' concerns. With respect to monitoring, the study shows that AHP contributes to SEA by identifying the most appropriate indicators, in order to control the impacts of a project.