Understanding the complexity of deinking plastic waste: An assessment of the efficiency of different treatments to remove ink resins from printed plastic film.

Plastic packaging is usually heavily printed with inks to provide functional benefits. However, the presence of inks strongly impedes the closed-loop recycling of plastic films. Various media have already been studied for the deinking of plastic films, but there is little scientific insight into the effectiveness of different deinking techniques. Therefore, this study aims to obtain a systematic understanding by measuring the liquefaction and maximum solubility of 14 chemically different polymer resins in seven different media typically used in plastic deinking, such as acetone, ethyl acetate, sodium hydroxide solution, cetyltrimethylammonium bromide solution, formic acid, sulfuric acid, and N,N-dimethylcyclohexylamine. Our findings show that acid-based media are able to remove a broader range of polymer resins. Organic solvents are particularly effective against acrylics and related polymer resins. The deinking efficiency tests on pure resins are also confirmed by deinking four printed plastic films containing different classes of polymer resins. A basic cost and environmental impact analysis is given to evaluate scale-up potential of the deinking medium.

Indirect Solid Freeform Fabrication of an Initiator-Free Photocrosslinkable Hydrogel Precursor for the Creation of Porous Scaffolds.

In the present work, a photopolymerized urethane-based poly(ethylene glycol) hydrogel is applied as a porous scaffold material using indirect solid freeform fabrication (SFF). This approach combines the benefits of SFF with a large freedom in material selection and applicable concentration ranges. A sacrificial 3D poly(ε-caprolactone) structure is generated using fused deposition modeling and used as template to produce hydrogel scaffolds. By changing the template plotting parameters, the scaffold channel sizes vary from 280 to 360 µm, and the strut diameters from 340 to 400 µm. This enables the production of scaffolds with tunable mechanical properties, characterized by an average hardness ranging from 9 to 43 N and from 1 to 6 N for dry and hydrated scaffolds, respectively. Experiments using mouse calvaria preosteoblasts indicate that a gelatin methacrylamide coating of the scaffolds results in an increased cell adhesion and proliferation with improved cell morphology.