Application of electrochemically generated ozone to the discoloration and degradation of solutions containing the dye Reactive Orange 122.

Aqueous solutions containing the commercial azo dye Reactive Orange 122 (RO122) were ozonated in acid and alkaline conditions. Ozone was electrochemically generated using a laboratory-made electrochemical reactor and applied using semi-batch conditions and a column bubble reactor. A constant ozone application rate of 0.25gh(-1) was used throughout. Color removal and degradation efficiency were evaluated as function of ozonation time, pH and initial dye concentration by means of discoloration kinetics and COD-TOC removal. Experimental findings revealed that pH affects both discoloration kinetics and COD-TOC removal. A single pseudo-first-order kinetic rate constant, k(obs), for discoloration was found for ozonation carried out in alkaline solutions, contrary to acidic solutions where k(obs) depends on ozonation time. COD-TOC removal supports degradation of RO122 is more pronounced for alkaline conditions. Evaluation of the oxidation feasibility by means of the COD/TOC ratio indicates that the ozonation process in both acid and alkaline conditions leads to a reduction in recalcitrance of the soluble organic matter.

Electrochemical Investigation of oligonucleotide-DNA hybridization on poly(4-methoxyphenethylamine).

This work describes the immobilization of purine and pyrimidine bases and immobilization/hybridization of synthetic oligonucleotides on graphite electrodes modified with poly(4-methoxyphenethylamine) produced in acid medium. The immobilization of adenine, guanine, cytosine and thymine on these modified electrodes was efficient, producing characteristic peaks. Another relevant observation is that, according to the literature, pyrimidine bases, cytosine and thymine are more difficult to detect. However, when immobilized onto the poly(4-methoxyphenethylamine), a significant increase in the magnitude of the current was obtained. The observation of the hybridization between the poly(GA) probe and its complementary, poly(CT) target, was possible by monitoring the guanosine and adenosine peaks or through methylene blue indicator, using differential pulse voltammetry. Hybridization results in a decrease of the peak current of guanosine and adenosine or the signal of methylene blue accumulated on the modified electrode surface. The hybridization with the complementary target was also investigated by electrochemical impedance spectroscopy. The results showed a significant modification in the Nyquist plot, after addition of the complementary target, with increase of the charge transference resistance.