Light Intensity- and Spectrum-Dependent Redox Regulation of Plant Metabolism.

Both light intensity and spectrum (280-800 nm) affect photosynthesis and, consequently, the formation of reactive oxygen species (ROS) during photosynthetic electron transport. ROS, together with antioxidants, determine the redox environment in tissues and cells, which in turn has a major role in the adjustment of metabolism to changes in environmental conditions. This process is very important since there are great spatial (latitude, altitude) and temporal (daily, seasonal) changes in light conditions which are accompanied by fluctuations in temperature, water supply, and biotic stresses. The blue and red spectral regimens are decisive in the regulation of metabolism because of the absorption maximums of chlorophylls and the sensitivity of photoreceptors. Based on recent publications, photoreceptor-controlled transcription factors such as ELONGATED HYPOCOTYL5 (HY5) and changes in the cellular redox environment may have a major role in the coordinated fine-tuning of metabolic processes during changes in light conditions. This review gives an overview of the current knowledge of the light-associated redox control of basic metabolic pathways (carbon, nitrogen, amino acid, sulphur, lipid, and nucleic acid metabolism), secondary metabolism (terpenoids, flavonoids, and alkaloids), and related molecular mechanisms. Light condition-related reprogramming of metabolism is the basis for proper growth and development of plants; therefore, its better understanding can contribute to more efficient crop production in the future.

Triploid Hybrid Vigor in Above-Ground Growth and Methane Fermentation Efficiency of Energy Willow.

Hybrid vigor and polyploidy are genetic events widely utilized to increase the productivity of crops. Given that bioenergy usage needs to be expanded, we investigated triploid hybrid vigor in terms of the biology of biomass-related willow traits and their relevance to the control of biomethane production. To produce triploid hybrid genotypes, we crossed two female diploid Swedish cultivars (Inger, Tordis) with two male autotetraploid willow (Salix viminalis) variants (PP-E7, PP-E15). Field studies at two locations and in two successive years recorded considerable midparent heterosis (MPH%) in early shoot length that ranged between 11.14 and 68.85% and in the growth rate between 34.12 and 97.18%. The three triploid hybrids (THs) developed larger leaves than their parental cultivars, and the MPH% for their CO2 assimilation rate varied between 0.84 and 25.30%. The impact of hybrid vigor on the concentrations of plant hormones in these TH genotypes reflected essentially different hormonal statuses that depended preferentially on maternal parents. Hybrid vigor was evinced by an elevated concentration of jasmonic acid in shoot meristems of all the three THs (MPH:29.73; 67.08; 91.91%). Heterosis in auxin-type hormones, such as indole-3-acetic acid (MPH:207.49%), phenylacetic acid (MPH:223.51%), and salicylic acid (MPH:27.72%) and benzoic acid (MPH:85.75%), was detectable in the shoots of TH21/2 plants. These hormones also accumulated in their maternal Inger plants. Heterosis in cytokinin-type hormones characterized the shoots of TH3/12 and TH17/17 genotypes having Tordis as their maternal parent. Unexpectedly, we detected abscisic acid as a positive factor in the growth of TH17/17 plants with negative MPH percentages in stomatal conductance and a lower CO2 assimilation rate. During anaerobic digestion, wood raw materials from the triploid willow hybrids that provided positive MPH% in biomethane yield (6.38 and 27.87%) showed negative MPH in their acid detergent lignin contents (from -8.01 to -14.36%). Altogether, these insights into controlling factors of above-ground growth parameters of willow genotypes support the utilization of triploid hybrid vigor in willow breeding to expand the cultivation of short rotation energy trees for renewable energy production.

The Effect of White Light Spectrum Modifications by Excess of Blue Light on the Frost Tolerance, Lipid- and Hormone Composition of Barley in the Early Pre-Hardening Phase.

It is well established that cold acclimation processes are highly influenced, apart from cold ambient temperatures, by light-dependent environmental factors. In this study we investigated whether an extra blue (B) light supplementation would be able to further improve the well-documented freezing tolerance enhancing effect of far-red (FR) enriched white (W) light. The impact of B and FR light supplementation to white light (WFRB) on hormone levels and lipid contents were determined in winter barley at moderate (15 °C) and low (5 °C) temperatures. Low R:FR ratio effectively induced frost tolerance in barley plantlets, but additional B light further enhanced frost hardiness at both temperatures. Supplementation of WFR (white light enriched with FR light) with B had a strong positive effect on abscisic acid accumulation while the suppression of salicylic acid and jasmonic acid levels were observed at low temperature which resembles the shade avoidance syndrome. We also observed clear lipidomic differences between the individual light and temperature treatments. WFRB light changed the total lipid content negatively, but monogalactosyldiacylglycerol (MGDG) content was increased, nonetheless. Our results prove that WFRB light can greatly influence phytohormone dynamics and lipid contents, which eventually leads to more efficient pre-hardening to avoid frost damage.

The Effect of Foliar Selenium (Se) Treatment on Growth, Photosynthesis, and Oxidative-Nitrosative Signalling of Stevia rebaudiana Leaves.

Selenium (Se) enrichment of Stevia rebaudiana Bertoni can serve a dual purpose, on the one hand to increase plant biomass and stress tolerance and on the other hand to produce Se fortified plant-based food. Foliar Se spraying (0, 6, 8, 10 mg/L selenate, 14 days) of Stevia plantlets resulted in slightly decreased stevioside and rebaudioside A concentrations, and it also caused significant increment in stem elongation, leaf number, and Se content, suggesting that foliar Se supplementation can be used as a biofortifying approach. Furthermore, Se slightly limited photosynthetic CO2 assimilation (AN, gsw, Ci/Ca), but exerted no significant effect on chlorophyll, carotenoid contents and on parameters associated with photosystem II (PSII) activity (FV/FM, F0, Y(NO)), indicating that Se causes no photodamage in PSII. Further results indicate that Se is able to activate PSI-cyclic electron flow independent protection mechanisms of the photosynthetic apparatus of Stevia plants. The applied Se activated superoxide dismutase (SOD) isoenzymes (MnSOD1, FeSOD1, FeSOD2, Cu/ZnSOD1, Cu/ZnSOD2) and down-regulated NADPH oxidase suggesting the Se-induced limitation of superoxide anion levels and consequent oxidative signalling in Stevia leaves. Additionally, the decrease in S-nitrosoglutathione reductase protein abundance and the intensification of protein tyrosine nitration indicate Se-triggered nitrosative signalling. Collectively, these results suggest that Se supplementation alters Stevia shoot morphology without significantly affecting biomass yield and photosynthesis, but increasing Se content and performing antioxidant effects, which indicates that foliar application of Se may be a promising method in Stevia cultivation.

Changes in physiological and photosynthetic parameters in tomato of different ethylene status under salt stress: Effects of exogenous 1-aminocyclopropane-1-carboxylic acid treatment and the inhibition of ethylene signalling.

Although ethylene (ET) is an important participant in plant responses to salt stress, its role in the early period of acclimation, especially in the case of photosynthesis has not been revealed in detail. In this study, the effects of tolerable (100 mM) or lethal (250 mM) NaCl concentrations were investigated in hydroponically grown tomato (Solanum lycopersicum L. cv. Ailsa Craig) plants of different ET status, in wild type (WT) plants, in WT plants pre-treated with the ET generator 1-aminocyclopropane-1-carboxylic acid (ACC) and in ET insensitive, Never ripe (Nr/Nr) mutants for 1-, 6- and 24 h. In the leaves ACC treatment reduced the osmotic effect of salt stress, while Nr mutation enhanced not only osmotic but ionic component of salt stress at 100 mM NaCl. ET insensitivity caused greater decline in stomatal conductance and photosynthetic CO2 assimilation rate than in the controls under tolerable salt stress, but both ACC treatment and Nr mutation helped to maintain positive carbon assimilation under lethal salt stress after 24 h. Nr mutant leaves showed highly enhanced regulated non-photochemical quenching (NPQ) and therefore lower quantum yield of photosystem II (PSII), due to more intensive cyclic electron flow around photosystem I (CEF-PSI), which was further increased under high salinity. Exogenous ACC treatment lowered CEF-PSI and enhanced PSII photochemistry after 6 h of lethal salt stress. Controlling PSI photoinhibition, ET is suggested to be an important regulator of CEF-PSI and photoprotection under salt stress. Furthermore, the altered ET status could cause contrasting effects under different stress severity.

Virtual surgical planning: Balancing esthetics, practicality, and anticipated stability in a complex Class III patient.

The treatment of skeletal Class III malocclusion with anterior open bite is a complex and challenging aspect of orthodontics. Facial esthetic factors, practicality and the anticipated stability of a provisional surgical plan must all be factored into the final decision of the actual orthodontic-orthognathic treatment. This case report presents the multidisciplinary treatment of a 39-year-old female patient with skeletal Class III, severe open bite with first dental contact being on the second molars, lateral crossbite, and crowding in both arches. The nonextraction treatment started with aligning and leveling of the teeth in both arches followed by an initial surgical plan based on the clinical evaluation of the smile esthetics. Precise surgical planning information was imported into the Virtual Surgica (VSP Orthognathics) workflow to visualize the direction and amount of movement necessary. The final plan was adjusted because of anticipated practical limitations of the surgery as well as to insure the stability. LeFort I, bilateral sagittal split osteotomies, and setback genioplasty were thus performed. After the surgery, the treatment concluded with the fine adjustment of the occlusion. In the end, good esthetic and functional outcomes with long-term stability were achieved as a result of this delicate multidisciplinary approach.

Comparison of changes in water status and photosynthetic parameters in wild type and abscisic acid-deficient sitiens mutant of tomato (Solanum lycopersicum cv. Rheinlands Ruhm) exposed to sublethal and lethal salt stress.

Abscisic acid (ABA) regulates many salt stress-related processes of plants such as water balance, osmotic stress tolerance and photosynthesis. In this study we investigated the responses of wild type (WT) and the ABA-deficient sitiens mutant of tomato (Solanum lycopersicum cv. Rheinlands Ruhm) to sublethal and lethal salt stress elicited by 100 mM and 250 mM NaCl, respectively. Sitiens mutants displayed much higher decrease in water potential, stomatal conductance and net CO2 assimilation rate under high salinity, especially at lethal salt stress, than the WT. However, ABA deficiency in sitiens caused more severe osmotic stress and more moderate ionic stress, higher K+/Na+ ratio, in leaf tissues of plants exposed to salt stress. The higher salt concentration caused irreversible damage to Photosystem II (PSII) reaction centres, severe reduction in the linear photosynthetic electron transport rate and in the effective quantum yields of PSII and PSI in sitiens plants. The cyclic electron transport (CET) around PSI, which is an effective defence mechanism against the damage caused by photoinhibition in PSI, decreased in sitiens mutants, while WT plants were able to increase CET under salt stress. This suggests that the activation of CET needs active ABA synthesis and/or signalling. In spite of ABA deficiency, proline accumulation could alleviate the stress injury at sublethal salt stress in the mutants but its accumulation was not sufficient at lethal salt stress.

H2O2 homeostasis in wild-type and ethylene-insensitive Never ripe tomato in response to salicylic acid treatment in normal photoperiod and in prolonged darkness.

Ethylene proved to be an important modulator of salicylic acid (SA) signalling pathway. Since SA may regulate both the production and scavenging of hydrogen peroxide (H2O2), which show light-dependency, the aim of this study was to compare H2O2 metabolism in the leaves of SA-treated wild-type (WT) tomato (Solanum lycopersicum L. cv. Ailsa Craig) and in ethylene receptor Never-ripe (Nr) mutants grown in normal photoperiod or in prolonged darkness. H2O2 accumulation was higher in the WT than in the mutants in normal photoperiod after 1 mM SA treatment, while Nr leaves contained more H2O2 after light deprivation. The expression of certain superoxide dismutase (SOD) genes and activity of the enzyme followed the same tendency as H2O2, which was scavenged by different enzymes in the two genotypes. Catalase (CAT, EC 1.11.1.6) activity was inhibited by SA in WT, while the mutants maintained enhanced enzyme activity in the dark. Thus, in WT, CAT inhibition was the major component of the H2O2 accumulation elicited by 1 mM SA in a normal photoperiod, since the expression and/or activity of ascorbate (APX, EC 1.11.1.11) and guaiacol peroxidases (POD, EC 1.11.1.7) were induced in the leaves. The absence of APX and POD activation in mutant plants suggests that the regulation of these enzymes by SA needs functional ethylene signalling. While the block of ethylene perception in Nr mutants was overwritten in the transcription and activity of certain SOD and CAT isoenzymes during prolonged darkness, the low APX and POD activities led to H2O2 accumulation in these tissues.

Salt stress-induced production of reactive oxygen- and nitrogen species and cell death in the ethylene receptor mutant Never ripe and wild type tomato roots.

The salt stress triggered by sublethal, 100 mM and lethal, 250 mM NaCl induced ethylene production as well as rapid accumulation of superoxide radical and H2O2 in the root tips of tomato (Solanum lycopersicum cv. Ailsa Craig) wild type and ethylene receptor mutant, Never ripe (Nr/Nr) plants. In the wild type plants superoxide accumulation confined to lethal salt concentration while H2O2 accumulated more efficiently under sublethal salt stress. However, in Nr roots the superoxide production was higher and unexpectedly, H2O2 level was lower than in the wild type under sublethal salt stress. Nitric oxide production increased significantly under sublethal and lethal salt stress in both genotypes especially in mutant plants, while peroxynitrite accumulated significantly under lethal salt stress. Thus, the nitro-oxidative stress may be stronger in Nr roots, which leads to the programmed death of tissues, characterized by the DNA and protein degradation and loss of cell viability under moderate salt stress. In Nr mutants the cell death was induced in the absence of ethylene perception. Although wild type roots could maintain their potassium content under moderate salt stress, K(+) level significantly declined leading to small K(+)/Na(+) ratio in Nr roots. Thus Nr mutants were more sensitive to salt stress than the wild type and the viability of root cells decreased significantly under moderate salt stress. These changes can be attributed to a stronger ionic stress due to the K(+) loss from the root tissues.

Does thread design influence relative bone-to-implant contact rate of palatal implants?

AIM: To determine histologically whether (a) changing the thread design between first- and second-generation palatal implants (Straumann, Basel, Switzerland) influences the bone-to-implant contact (BIC) rate of palatal implants subjected to conventional loading, and (b) whether histological evidence of peri-implantitis appears in this setting. PATIENTS AND METHODS: Patients who had received an orthodontic palatal implant for skeletal anchorage between January 1998 and December 2007 were examined. First-generation palatal implants (Straumann, Basel, Switzerland) 3.3 mm in diameter and 6 mm or 4 mm long were used, as were second-generation implants 4.1 mm in diameter and 4.2 mm long. After completion of active orthodontic treatment, the implants were removed and prepared for histological investigation. This study was designed as a comparative analysis of a series of two cases: 28 explanted first-generation (n = 14) and second-generation (n = 14) palatal implants were analyzed. RESULTS: Bone healing was achieved with all implants. Both types of implants revealed a mean bone-to-implant contact (BIC) rate that was nearly equal: 80.7% (SD 10.7%) for the first-generation and 81% (SD 13.1%) for the second-generation implants. Bone resorption was only observed in 5 palatal implants (3/14 of the first, and 2/14 of the second generation). CONCLUSION: Despite differing thread designs, second-generation palatal implants revealed similar bone-to-implant contact rates as did those of the first generation. Few patients presented bone resorption in the peri-implant bone.

Use of 3-dimensional surface acquisition to study facial morphology in 5 populations.

INTRODUCTION: The aim of this study was to assess the use of 3-dimensional facial averages for determining morphologic differences from various population groups. METHODS: We recruited 473 subjects from 5 populations. Three-dimensional images of the subjects were obtained in a reproducible and controlled environment with a commercially available stereo-photogrammetric camera capture system. Minolta VI-900 (Konica Minolta, Tokyo, Japan) and 3dMDface (3dMD LLC, Atlanta, Ga) systems were used. Each image was obtained as a facial mesh and orientated along a triangulated axis. All faces were overlaid, one on top of the other, and a complex mathematical algorithm was performed until average composite faces of 1 man and 1 woman were achieved for each subgroup. These average facial composites were superimposed based on a previously validated superimposition method, and the facial differences were quantified. RESULTS: Distinct facial differences were observed among the groups. The linear differences between surface shells ranged from 0.37 to 1.00 mm for the male groups. The linear differences ranged from 0.28 and 0.87 mm for the women. The color histograms showed that the similarities in facial shells between the subgroups by sex ranged from 26.70% to 70.39% for men and 36.09% to 79.83% for women. The average linear distance from the signed color histograms for the male subgroups ranged from -6.30 to 4.44 mm. The female subgroups ranged from -6.32 to 4.25 mm. CONCLUSIONS: Average faces can be efficiently and effectively created from a sample of 3-dimensional faces. Average faces can be used to compare differences in facial morphologies for various populations and sexes. Facial morphologic differences were greatest when totally different ethnic variations were compared. Facial morphologic similarities were present in comparable groups, but there were large variations in concentrated areas of the face.

Three-dimensional comparison of facial morphology in white populations in Budapest, Hungary, and Houston, Texas.

INTRODUCTION: The aim of this study was to assess the use of 3-dimensional facial averages in determining facial morphologic differences in 2 white population groups. METHODS: Three-dimensional images were obtained in a reproducible and controlled environment from a commercially available stereo-photogrammetric camera capture system. The 3dMDface system (3dMD, Atlanta, Ga) photographed 200 subjects from 2 population groups (Budapest, Hungary, and Houston, Tex); each group included 50 men and 50 women, aged 18 to 30 years. Each face was obtained as a facial mesh and orientated along a triangulated axis. All faces were overlaid, one on top of the other, and a complex mathematical algorithm was used until an average composite face of 1 man and 1 woman was obtained for each subgroup (Hungarian men, Hungarian women, Texas men, and Texas women). These average facial composites were superimposed (men and women) based on a previously validated superimposition method, and the facial differences were quantified. RESULTS: Distinct facial differences were observed between the population groups. These differences could be seen in the nasal, malar, lips, and lower facial regions. In general, the mean facial differences were 0.55 +/- 0.60 mm between the Hungarian and Texas women, and 0.44 +/- 0.42 mm between the Hungarian and Texas men. The ranges of differences were -2.02 to 3.77 and -2.05 to 1.94 mm for the female and male pairings, respectively. CONCLUSIONS: Three-dimensional facial averages representing the facial soft-tissue morphology of adults can be used to assess diagnostic and treatment regimens for patients by population. Each population is different with respect to their soft-tissue structures, and traditional soft-tissue normative data (eg, white norms) should be altered and used for specific groups.

Primary loading of palatal implants for orthodontic anchorage--a pilot animal study.

OBJECTIVES: This study aimed at evaluating the clinical performance and osseointegration of short orthodontic implants immediately loaded with orthodontic forces. MATERIAL AND METHODS: The investigation was designed as an experimental animal study. Eight palatal implants of the Ortho-system were immediately loaded with 100 cN after palatal insertion in 4 female German shepherd dogs. Xylene orange and calcein green were used for polychrome sequential labelling. Histological preparation utilized the cutting and grinding technique. Outcome variables were clinical implant success, histological osseointegration and bone-to-implant contact rates. RESULTS: All (8/8) implants were clinically successful and stable when the animals were sacrificed. One implant showed fibrous encapsulation and was histologically classified as "failed" for "osseointegration". Upon morphometrical analysis, bone to implant contact rates for newly formed or remodelled bone were 19% at 4 weeks and 26% at 6 months. The fluorochrome labelling indicated substantial mineral apposition on the surface of the implants at the end of the first and the second postoperative months. CONCLUSION: This study revealed borderline reliability of osseointegration for immediately loaded palatal implants but reasonable bone formation at the 4th postoperative week. Thus, two clinical concepts are both supported: early orthodontic loading after 4 weeks as well as improvement of primary stability to provide a biomechanical basis for immediate orthodontic loading.