Investigating lytic polysaccharide monooxygenase-assisted wood cell wall degradation with microsensors.

Lytic polysaccharide monooxygenase (LPMO) supports biomass hydrolysis by increasing saccharification efficiency and rate. Recent studies demonstrate that H2O2 rather than O2 is the cosubstrate of the LPMO-catalyzed depolymerization of polysaccharides. Some studies have questioned the physiological relevance of the H2O2-based mechanism for plant cell wall degradation. This study reports the localized and time-resolved determination of LPMO activity on poplar wood cell walls by measuring the H2O2 concentration in their vicinity with a piezo-controlled H2O2 microsensor. The investigated Neurospora crassa LPMO binds to the inner cell wall layer and consumes enzymatically generated H2O2. The results point towards a high catalytic efficiency of LPMO at a low H2O2 concentration that auxiliary oxidoreductases in fungal secretomes can easily generate. Measurements with a glucose microbiosensor additionally demonstrate that LPMO promotes cellobiohydrolase activity on wood cell walls and plays a synergistic role in the fungal extracellular catabolism and in industrial biomass degradation.

Correlative Electrochemical Microscopy for the Elucidation of the Local Ionic and Electronic Properties of the Solid Electrolyte Interphase in Li-Ion Batteries.

The solid-electrolyte interphase (SEI) plays a key role in the stability of lithium-ion batteries as the SEI prevents the continuous degradation of the electrolyte at the anode. The SEI acts as an insulating layer for electron transfer, still allowing the ionic flux through the layer. We combine the feedback and multi-frequency alternating-current modes of scanning electrochemical microscopy (SECM) for the first time to assess quantitatively the local electronic and ionic properties of the SEI varying the SEI formation conditions and the used electrolytes in the field of Li-ion batteries (LIB). Correlations between the electronic and ionic properties of the resulting SEI on a model Cu electrode demonstrates the unique feasibility of the proposed strategy to provide the two essential properties of an SEI: ionic and electronic conductivity in dependence on the formation conditions, which is anticipated to exhibit a significant impact on the field of LIBs.

Scanning Electrochemical Cell Microscopy Investigation of Single ZIF-Derived Nanocomposite Particles as Electrocatalysts for Oxygen Evolution in Alkaline Media.

"Single entity" measurements are central for an improved understanding of the function of nanoparticle-based electrocatalysts without interference arising from mass transfer limitations and local changes of educt concentration or the pH value. We report a scanning electrochemical cell microscopy (SECCM) investigation of zeolitic imidazolate framework (ZIF-67)-derived Co-N-doped C composite particles with respect to the oxygen evolution reaction (OER). Surmounting the surface wetting issues as well as the potential drift through the use of a non-interfering Os complex as free-diffusing internal redox potential standard, SECCM could be successfully applied in alkaline media. SECCM mapping reveals activity differences relative to the number of particles in the wetted area of the droplet landing zone. The turnover frequency (TOF) is 0.25 to 1.5 s-1 at potentials between 1.7 and 1.8 V vs. RHE, respectively, based on the number of Co atoms in each particle. Consistent values at locations with varying number of particles demonstrates OER performance devoid of macroscopic film effects.

Local Activities of Hydroxide and Water Determine the Operation of Silver-Based Oxygen Depolarized Cathodes.

Local ion activity changes in close proximity to the surface of an oxygen depolarized cathode (ODC) were measured by scanning electrochemical microscopy (SECM). While the operating ODC produces OH- ions and consumes O2 and H2 O through the electrocatalytic oxygen reduction reaction (ORR), local changes in the activity of OH- ions and H2 O are detected by means of a positioned Pt microelectrode serving as an SECM tip. Sensing at the Pt tip is based on the pH-dependent reduction of PtO and obviates the need for prior electrode modification steps. It can be used to evaluate the coordination numbers of OH- ions and H2 O, and the method was exploited as a novel approach of catalyst activity assessment. We show that the electrochemical reaction on highly active catalysts can have a drastic influence on the reaction environment.

Micrometer-Precise Determination of the Thin Electrolyte Layer of a Spectroelectrochemical Cell by Microelectrode Approach Curves.

A spectroelectrochemical cell is presented that allows investigations of electrochemical reactions by means of attenuated total reflection infrared (ATR-IR) spectroscopy. The electrode holder for the working (WE), counter and reference electrode as mounted in the IR spectrometer cause the formation of a thin electrolyte layer between the internal reflection element (IRE) and the surface of the WE. The thickness of this thin electrolyte layer (dTL) was estimated by performing a scanning electrochemical microscopy-(SECM) like approach of a Pt microelectrode (ME), which was leveled with the WE toward the IRE surface. The precise lowering of the ME/WE plane toward the IRE was enabled by a micrometer screw. The approach curve was recorded in negative feedback mode of SECM and revealed the contact point of the ME and WE on the IRE, which was used as reference point to perform the electro-oxidation of ethanol over a drop-casted Pd/NCNT catalyst on the WE at different thin-layer thicknesses by cyclic voltammetry. The reaction products were detected in the liquid electrolyte by IR spectroscopy, and the effect of variations in dTL on the current densities and IR spectra were analyzed and discussed. The obtained data identify dTL as an important variable in thin-layer experiments with electrochemical reactions and FTIR readout.

The oxygen reduction reaction at the three-phase boundary: nanoelectrodes modified with Ag nanoclusters.

Silver nanoclusters are deposited on bifunctional Θ-shaped nanoelectrodes consisting of a carbon nanoelectrode combined with a hollow nanopipette. The Θ-nanoelectrodes are used as model systems to study interfacial mass transport in gas diffusion electrodes and in particular oxygen-depolarized cathodes (ODC) for the oxygen reduction reaction (ORR) in chlor-alkali electrolysers. By local delivery of O2 gas to the electroactive Ag nanoclusters through the adjacent nanopipette, enhanced currents for the ORR at the Ag nanoparticles are recorded which are not accountable when considering the low solubility and slow diffusion of O2 in highly alkaline media. Instead, local oversaturation of O2 leads to current enhancement at the Ag nanoclusters. Due to the intrinsic high mass transport rates at the nanometric electrodes accompanied by local delivery of reactants, the method generally allows to study electrochemical reactions at single nanoparticles beyond the limitations induced by slow diffusion and low reactant concentration. Kinetic and mechanistic information, for instance derived from Tafel slopes, can be obtained from kinetic regimes not accessible to standard techniques.

Co@Co3O4 Encapsulated in Carbon Nanotube-Grafted Nitrogen-Doped Carbon Polyhedra as an Advanced Bifunctional Oxygen Electrode.

Efficient reversible oxygen electrodes for both the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER) are vitally important for various energy conversion devices, such as regenerative fuel cells and metal-air batteries. However, realization of such electrodes is impeded by insufficient activity and instability of electrocatalysts for both water splitting and oxygen reduction. We report highly active bifunctional electrocatalysts for oxygen electrodes comprising core-shell Co@Co3O4 nanoparticles embedded in CNT-grafted N-doped carbon-polyhedra obtained by the pyrolysis of cobalt metal-organic framework (ZIF-67) in a reductive H2 atmosphere and subsequent controlled oxidative calcination. The catalysts afford 0.85 V reversible overvoltage in 0.1 m KOH, surpassing Pt/C, IrO2 , and RuO2 and thus ranking them among one of the best non-precious-metal electrocatalysts for reversible oxygen electrodes.

Assembling Paramagnetic Ceruloplasmin at Electrode Surfaces Covered with Ferromagnetic Nanoparticles. Scanning Electrochemical Microscopy in the Presence of a Magnetic Field.

Adsorption of ceruloplasmin (Cp) at a gold electrode modified with ferromagnetic iron nanoparticles encapsulated in carbon (Fe@C Nps) leads to a successful immobilization of the enzyme in its electroactive form. The proper placement of Cp at the electrode surface on top of the nanocapsules containing an iron core allowed a preorientation of the enzyme, hence allowing direct electron transfer between the electrode and the enzyme. Laser ablation coupled with inductively coupled plasma mass spectrometry indicated that Cp was predominantly located at the paramagnetic nanoparticles. Scanning electrochemical microscopy measurements in the sample-generation/tip-collection mode proved that Cp was ferrooxidative inactive if it was immobilized on the bare gold surface and reached the highest activity if it was adsorbed on Fe@C Nps in the presence of a magnetic field.