Observations of specimen morphology effects on near-zone-axis convergent-beam electron diffraction patterns.

This work presents observations of symmetry breakages in the intensity distributions of near-zone-axis convergent-beam electron diffraction (CBED) patterns that can only be explained by the symmetry of the specimen and not the symmetry of the unit cell describing the atomic structure of the material. The specimen is an aluminium-copper-tin alloy containing voids many tens of nanometres in size within continuous single crystals of the aluminium host matrix. Several CBED patterns where the incident beam enters and exits parallel void facets without the incident beam being perpendicular to these facets are examined. The symmetries in their intensity distributions are explained by the specimen morphology alone using a geometric argument based on the multislice theory. This work shows that it is possible to deduce nanoscale morphological information about the specimen in the direction of the electron beam - the elusive third dimension in transmission electron microscopy - from the inspection of CBED patterns.

Combination of Chemotherapy and Mild Hyperthermia Using Targeted Nanoparticles: A Potential Treatment Modality for Breast Cancer.

Despite the clinical benefits that chemotherapeutics has had on the treatment of breast cancer, drug resistance remains one of the main obstacles to curative cancer therapy. Nanomedicines allow therapeutics to be more targeted and effective, resulting in enhanced treatment success, reduced side effects, and the possibility of minimising drug resistance by the co-delivery of therapeutic agents. Porous silicon nanoparticles (pSiNPs) have been established as efficient vectors for drug delivery. Their high surface area makes them an ideal carrier for the administration of multiple therapeutics, providing the means to apply multiple attacks to the tumour. Moreover, immobilising targeting ligands on the pSiNP surface helps direct them selectively to cancer cells, thereby reducing harm to normal tissues. Here, we engineered breast cancer-targeted pSiNPs co-loaded with an anticancer drug and gold nanoclusters (AuNCs). AuNCs have the capacity to induce hyperthermia when exposed to a radiofrequency field. Using monolayer and 3D cell cultures, we demonstrate that the cell-killing efficacy of combined hyperthermia and chemotherapy via targeted pSiNPs is 1.5-fold higher than applying monotherapy and 3.5-fold higher compared to using a nontargeted system with combined therapeutics. The results not only demonstrate targeted pSiNPs as a successful nanocarrier for combination therapy but also confirm it as a versatile platform with the potential to be used for personalised medicine.

From nanoparticles to crystals: one-pot programmable biosynthesis of photothermal gold structures and their use for biomedical applications.

Inspired by nature, green chemistry uses various biomolecules, such as proteins, as reducing agents to synthesize metallic nanostructures. This methodology provides an alternative route to conventional harsh synthetic processes, which include polluting chemicals. Tuning the resulting nanostructure properties, such as their size and shape, is challenging as the exact mechanism involved in their formation is still not well understood. This work reports a well-controlled method to program gold nanostructures' shape, size, and aggregation state using only one protein type, mucin, as a reduction and capping material in a one-pot bio-assisted reaction. Using mucin as a gold reduction template while varying its tertiary structure via the pH of the synthesis, we demonstrate that spherical, coral-shaped, and hexagonal gold crystals can be obtained and that the size can be tuned over three orders of magnitude. This is achieved by leveraging the protein's intrinsic reducing properties and pH-induced conformational changes. The systematic study of the reaction kinetics and growth steps developed here provides an understanding of the mechanism behind this phenomenon. We further show that the prepared gold nanostructures exhibit tunable photothermal properties that can be optimized for various hyperthermia-induced antibacterial applications.

Stoichiometry-grain size-specific capacitance interrelationships in nickel oxide.

Nickel oxide exhibits almost the highest theoretical specific capacitance (C s), which includes contributions from non-faradaic double layer charging and faradaic OH- adsorption. However, the realistic and tangible C s is due to the faradaic process, which can be influenced by chemical (i.e. stoichiometry) and structural (i.e. grain size) changes. Hence, it is necessary to investigate the interrelationships among chemical and structural features and charge storage capacity. Here, a non-stoichiometric nickel oxide (Ni x O) containing Ni2+ and Ni3+ was synthesized by a sol-gel method at 620, 720 and 920 °C using Ni(NO3)2·6H2O and citric acid. The grain size as estimated from X-ray diffraction increases from 55 to 194 nm with increase in the synthesis temperature. The stoichiometry measured through Ni2+ (or Ni3+) fraction from X-ray photoelectron spectroscopy also increases from 70.3 to 99.2 atom% with synthesis temperature. The C s due to faradaic OH- adsorption was estimated from cyclic voltammetry in 2 M KOH within -0.05 to +0.60 V vs. Hg/Hg2Cl2/KCl (sat. in water). This C s increases from 7.5 to 92.4 F g-1 with a decrease in the grain size and stoichiometry (increase in Ni3+) due to possibly the increased conductivity and NiOOH formation through OH- adsorption. The deviation from stoichiometry at lower grain size mainly stems from nickel vacancy accommodation, according to the thermodynamic model proposed here. The interrelationships among stoichiometry, grain size and the specific capacitance of nickel oxide are investigated.

Chemical Fingerprinting of Polymers Using Electron Energy-Loss Spectroscopy.

Electron energy-loss spectroscopy (EELS) is becoming an important tool in the characterization of polymeric materials. The sensitivity of EELS to changes in the chemical structure of polymeric materials dictates its applicability. In particular, it is important for compositional analysis to have reference spectra of pure components. Here, we report the spectra of the carbon K-edge of six polymers (polyethylene, polypropylene, polybutylene terephthalate, and polylactic acid) including copolymers (styrene acrylonitrile and acrylonitrile butadiene styrene), to be used as reference spectra for future EELS studies of polymers. We have successfully decomposed the carbon K-edge of each of the polymers and assigned the observed peaks to bonding transitions. The spectra have been acquired in standard experimental conditions, and electron beam damage has been taken into account during establishment of spectral-structural relationships. We found that the more commonly available low-energy resolution spectrometers are adequate to chemically fingerprint linear saturated hydrocarbons such as PE, PP, and PLA. We have thus moved a step closer toward creating an atlas of polymer EELS spectra, which can be subsequently used for chemical bond mapping of polymeric materials with nanoscale spatial resolution.

Precipitation kinetics, microstructure evolution and mechanical behavior of a developed Al-Mn-Sc alloy fabricated by selective laser melting.

The dynamic metallurgical characteristics of the selective laser melting (SLM) process offer fabricated materials with non-equilibrium microstructures compared to their cast and wrought counterparts. To date, few studies on the precipitation kinetics of SLM processed heat-treatable alloys have been reported, despite the importance of obtaining such detailed knowledge for optimizing the mechanical properties. In this study, for the first time, the precipitation behavior of an SLM fabricated Al-Mn-Sc alloy was systematically investigated over the temperature range of 300-450 °C. The combination of in-situ synchrotron-based ultra-small angle X-ray scattering (USAXS), small angle X-ray scattering (SAXS) and X-ray diffraction (XRD) revealed the continuous evolution of Al6Mn and Al3Sc precipitates upon isothermal heating in both precipitate structure and morphology, which was confirmed by ex-situ transmission electron microscopy (TEM) studies. A pseudo-delay nucleation and growth phenomenon of the Al3Sc precipitates was observed for the SLM fabricated Al-Mn-Sc alloy. This phenomenon was attributed to the preformed Sc clusters in the as-fabricated condition due to the intrinsic heat treatment effect induced by the unique layer-by-layer building nature of SLM. The growth kinetics for the Al6Mn and Al3Sc precipitates were established based on the in-situ X-ray studies, with the respective activation energies determined to be (74 ± 4) kJ/mol and (63 ± 9) kJ/mol. The role of the precipitate evolution on the final mechanical properties was evaluated by tensile testing, and an observed discontinuous yielding phenomenon was effectively alleviated with increased aging temperatures.

Transforming solid-state precipitates via excess vacancies.

Many phase transformations associated with solid-state precipitation look structurally simple, yet, inexplicably, take place with great difficulty. A classic case of difficult phase transformations is the nucleation of strengthening precipitates in high-strength lightweight aluminium alloys. Here, using a combination of atomic-scale imaging, simulations and classical nucleation theory calculations, we investigate the nucleation of the strengthening phase θ' onto a template structure in the aluminium-copper alloy system. We show that this transformation can be promoted in samples exhibiting at least one nanoscale dimension, with extremely high nucleation rates for the strengthening phase as well as for an unexpected phase. This template-directed solid-state nucleation pathway is enabled by the large influx of surface vacancies that results from heating a nanoscale solid. Template-directed nucleation is replicated in a bulk alloy as well as under electron irradiation, implying that this difficult transformation can be facilitated under the general condition of sustained excess vacancy concentrations.

Mechanical, Electrical, and Crystallographic Property Dynamics of Bent and Strained Ge/Si Core-Shell Nanowires As Revealed by in situ Transmission Electron Microscopy.

Research on electromechanical properties of semiconducting nanowires, including plastic behavior of Si nanowires and superb carrier mobility of Ge and Ge/Si core-shell nanowires, has attracted increasing attention. However, to date, there have been no direct experimental studies on crystallography dynamics and its relation to electrical and mechanical properties of Ge/Si core-shell nanowires. In this Letter, we in parallel investigated the crystallography changes and electrical and mechanical behaviors of Ge/Si core-shell nanowires under their deformation in a transmission electron microscope (TEM). The core-shell Ge/Si nanowires were bent and strained in tension to high limits. The nanowire Young's moduli were measured to be up to ∼191 GPa, and tensile strength was in a range of 3-8 GPa. Using high-resolution imaging, we confirmed that under large bending strains, Si shells had irregularly changed to the polycrystalline/amorphous state, whereas Ge cores kept single crystal status with the local lattice strains on the compressed side. The nanowires revealed cyclically changed electronic properties and had decent mechanical robustness. Electron diffraction patterns obtained from  in situ TEM, paired with theoretical simulations, implied that nonequilibrium phases of polycrystalline/amorphous Si and ß-Sn Ge appearing during the deformations may explain the regarded mechanical robustness and varying conductivities under straining. Finally, atomistic simulations of Ge/Si nanowires showed the pronounced changes in their electronic structure during bending and the appearance of a conductive channel in compressed regions which might also be responsible for the increased conductivity seen in bent nanowires.

Photocatalysis with Pt-Au-ZnO and Au-ZnO Hybrids: Effect of Charge Accumulation and Discharge Properties of Metal Nanoparticles.

Metal-semiconductor hybrid nanomaterials are becoming increasingly popular for photocatalytic degradation of organic pollutants. Herein, a seed-assisted photodeposition approach is put forward for the site-specific growth of Pt on Au-ZnO particles (Pt-Au-ZnO). A similar approach was also utilized to enlarge the Au nanoparticles at epitaxial Au-ZnO particles (Au@Au-ZnO). An epitaxial connection at the Au-ZnO interface was found to be critical for the site-specific deposition of Pt or Au. Light on-off photocatalysis tests, utilizing a thiazine dye (toluidine blue) as a model organic compound, were conducted and confirmed the superior photodegradation properties of Pt-Au-ZnO hybrids compared to Au-ZnO. In contrast, Au-ZnO type hybrids were more effective toward photoreduction of toluidine blue to leuco-toluidine blue. It was deemed that photoexcited electrons of Au-ZnO (Au, ∼5 nm) possessed high reducing power owing to electron accumulation and negative shift in Fermi level/redox potential; however, exciton recombination due to possible Fermi-level equilibration slowed down the complete degradation of toluidine blue. In the case of Au@Au-ZnO (Au, ∼15 nm), the photodegradation efficiency was enhanced and the photoreduction rate reduced compared to Au-ZnO. Pt-Au-ZnO hybrids showed better photodegradation and mineralization properties compared to both Au-ZnO and Au@Au-ZnO owing to a fast electron discharge (i.e. better electron-hole seperation). However, photoexcited electrons lacked the reducing power for the photoreduction of toluidine blue. The ultimate photodegradation efficiencies of Pt-Au-ZnO, Au@Au-ZnO, and Au-ZnO were 84, 66, and 39%, respectively. In the interest of effective metal-semiconductor type photocatalysts, the present study points out the importance of choosing the right metal, depending on whether a photoreduction and/or photodegradation process is desired.

Topologically Enclosed Aluminum Voids as Plasmonic Nanostructures.

Recent advances in the ability to synthesize metallic nanoparticles with tailored geometries have led to a revolution in the field of plasmonics. However, studies of the important complementary system, an inverted nanostructure, have so far been limited to two-dimensional sphere-segment voids or holes. Here we reveal the localized surface plasmon resonances (LSPRs) of nanovoids that are topologically enclosed in three-dimensions: an "anti-nanoparticle". We combine this topology with the favorable plasmonic properties of aluminum to observe strongly localized field enhancements with LSPR energies in the extreme UV range, well beyond those accessible with noble metals or yet achieved with aluminum. We demonstrate the resonance tunability by tailoring the shape and size of the nanovoids, which are truncated octahedra in the 10-20 nm range. This system is pristine: the nanovoid cavity is free from any oxide or supporting substrate that would affect the LSPRs. We exploit this to infer LSPRs of pure, sub-20-nm Al nanoparticles, which have yet to be synthesized. Access to this extreme UV range will allow applications in LSPR-enhanced UV photoemission spectroscopy and photoionization.

Nanostructured photoelectrochemical solar cell for nitrogen reduction using plasmon-enhanced black silicon.

Ammonia (NH3) is one of the most widely produced chemicals worldwide. It has application in the production of many important chemicals, particularly fertilizers. It is also, potentially, an important energy storage intermediate and clean energy carrier. Ammonia production, however, mostly uses fossil fuels and currently accounts for more than 1.6% of global CO2 emissions (0.57 Gt in 2015). Here we describe a solar-driven nanostructured photoelectrochemical cell based on plasmon-enhanced black silicon for the conversion of atmospheric N2 to ammonia producing yields of 13.3 mg m(-2) h(-1) under 2 suns illumination. The yield increases with pressure; the highest observed in this work was 60 mg m(-2) h(-1) at 7 atm. In the presence of sulfite as a reactant, the process also offers a direct solar energy route to ammonium sulfate, a fertilizer of economic importance. Although the yields are currently not sufficient for practical application, there is much scope for improvement in the active materials in this cell.

Direct mapping of Li-enabled octahedral tilt ordering and associated strain in nanostructured perovskites.

Self-assembled nanostructures with periodic phase separation hold great promise for creating two- and three-dimensional superlattices with extraordinary physical properties. Understanding the mechanism(s) driving the formation of such superlattices demands an understanding of their underlying atomic structure. However, the nanoscale structural fluctuations intrinsic to these superlattices pose a new challenge for structure determination methods. Here we develop an optimized atomic-level imaging condition to measure TiO6 octahedral tilt angles, unit-cell-by-unit-cell, in perovskite-based Li(0.5-3x)Nd(0.5+x)TiO3, and thereby determine the mathematical formula governing this nanoscale superstructure. We obtain a direct real-space correlation of the octahedral tilt modulation with the superstructure geometry and lattice-parameter variations. This reveals a composition-dependent, self-ordered octahedral superlattice. Amazingly, we observe a reversible annihilation/reconstruction of the octahedral superlattice correlated with the delithiation/lithiation process in this promising Li-ion conductor. This approach to quantify local octahedral tilt and correlate it with strain can be applied to characterize complex octahedral behaviours in other advanced oxide systems.

Interpretation of angular symmetries in electron nanodiffraction patterns from thin amorphous specimens.

The interpretation of angular symmetries in electron nanodiffraction patterns from thin amorphous specimens is examined. It is found that in general there are odd symmetries in experimental electron nanodiffraction patterns. Using simulation, it is demonstrated that this effect can be attributed to dynamical scattering, rather than other divergences from the ideal experimental conditions such as probe-forming lens aberrations and camera noise. The departure of opposing diffracted intensities from Friedel's law in the phase grating formalism is calculated using a general structure factor for disordered materials. On the basis of this, a simple correction procedure is suggested to recover the kinematical angular symmetries, and thus readily interpretable information that reflects the symmetries of the original projected object. This correction is numerically tested using both the phase object and multislice calculations, and is demonstrated to fully recover all the kinematical diffracted symmetries from a simulated atomic model of a metallic glass.

Plasmonic Ge-doped ZnO nanocrystals.

We present the first colloidal synthesis of Ge-doped ZnO nanocrystals, which are produced by a scalable method that uses only air and moisture stable precursors. The incorporation of tetravalent Ge ions within ZnO nanocrystals generates a surface plasmon resonance in the near-mid infrared, and induces a change in morphology, from isotropic spheroidal nanocrystals to rod-like, elongated structures with a distinctive c-axis orientation.

A multi-responsive intrinsically disordered protein (IDP)-directed green synthesis of fluorescent gold nanoclusters.

Herein we demonstrate the green synthesis of fluorescent gold nanoclusters (AuNCs) using a multi-responsive intrinsically disordered protein (IDP) polymer, Rec1-resilin, as a multi-functional template. In a controlled environment, Rec1-resilin acts simultaneously as the directing agent and the reducer, and performs the role of a highly efficient stabilizer once AuNCs are formed. The evolution of the photophysical properties and the chemical states of AuNCs formed are measured using UV-Vis, fluorescence and X-ray photoelectron spectroscopy. Circular dichroism (CD) spectroscopy measures the intrinsically disordered nature of Rec1-resilin stabilizing AuNCs. High resolution transmission electron microscopy (HR-TEM) reveals the detailed structure and morphology of the generated AuNCs of <1.5 nm size. A local ordering resembling that of a face-centered cubic (FCC) structure with evidence of twinning was observed for the generated AuNCs. The AuNCs so formed exclude the use of toxic reducing agents and display excellent water dispersibility, photostability and environmental stability towards aggregation.

Nanofabrication of highly ordered, tunable metallic mesostructures via quasi-hard-templating of lyotropic liquid crystals.

The synthesis of metal frameworks perforated with nanotunnels is a challenge because metals have high surface energies that favor low surface area structures; traditional liquid-crystal templating techniques cannot achieve the synthetic control required. We report a synthetic strategy to fabricate metal nanomaterials with highly ordered, tunable mesostructures in confined systems based on a new quasi-hard-templating liquid-crystals mechanism. The resulting platinum nanowires exhibit long range two-dimensional hexagonally ordered mesopore structures. In addition, single crystalline hexagonal mesoporous platinum nanowires with dominant {110} facets have been synthesized. Finally, we demonstrate that the mesostructures of metal nanomaterials can be tuned from hexagonal to lamellar mesostructures.

Ending aging in super glassy polymer membranes.

Aging in super glassy polymers such as poly(trimethylsilylpropyne) (PTMSP), poly(4-methyl-2-pentyne) (PMP), and polymers with intrinsic microporosity (PIM-1) reduces gas permeabilities and limits their application as gas-separation membranes. While super glassy polymers are initially very porous, and ultra-permeable, they quickly pack into a denser phase becoming less porous and permeable. This age-old problem has been solved by adding an ultraporous additive that maintains the low density, porous, initial stage of super glassy polymers through absorbing a portion of the polymer chains within its pores thereby holding the chains in their open position. This result is the first time that aging in super glassy polymers is inhibited whilst maintaining enhanced CO2 permeability for one year and improving CO2/N2 selectivity. This approach could allow super glassy polymers to be revisited for commercial application in gas separations.

Efficient atomic-scale kinetics through a complex heterophase interface.

Atomic-scale imaging and first-principles modeling are applied to the heterophase interface between the Al-Cu solid solution (αCu) and θ' (Al2Cu) phases. Contrary to recent studies, our observations reveal a diffuse interface of complex but well-defined structure that enables the progression from αCu to θ' over a distance of ≈1 nm. We demonstrate that, surprisingly, the observed interfacial structure is not preferred on energetic grounds. Rather, the excess in interfacial energy is compensated by efficient atomic-scale kinetics of the αCu→θ' phase transformation.

Compositional uniformity, domain patterning and the mechanism underlying nano-chessboard arrays.

We propose that systems exhibiting compositional patterning at the nanoscale, so far assumed to be due to some kind of ordered phase segregation, can be understood instead in terms of coherent, single phase ordering of minority motifs, caused by some constrained drive for uniformity. The essential features of this type of arrangement can be reproduced using a superspace construction typical of uniformity-driven orderings, which only requires the knowledge of the modulation vectors observed in the diffraction patterns. The idea is discussed in terms of a simple two-dimensional lattice-gas model that simulates a binary system in which the dilution of the minority component is favoured. This simple model already exhibits a hierarchy of arrangements similar to the experimentally observed nano-chessboard and nano-diamond patterns, which are described as occupational modulated structures with two independent modulation wavevectors and simple step-like occupation modulation functions.

Gold nanothorns-macroporous silicon hybrid structure: a simple and ultrasensitive platform for SERS.

We synthesised a novel gold-on-porous silicon hybrid material that exhibits a highly sensitive and reproducible surface-enhanced Raman spectroscopy (SERS) response. The material was fabricated simply by reducing gold chloride with hydrofluoric acid on the surface of macro-porous silicon (macro-PSi). The material consists of thorn-shaped gold nanocrystals with characteristic shapes and sizes on the surface of macro-PSi.