RESUMO
Metastatic tumours are complex ecosystems; a community of multiple cell types, including cancerous cells, fibroblasts, and immune cells that exist within a supportive and specific microenvironment. The interplay of these cells, together with tissue specific chemical, structural and temporal signals within a three-dimensional (3D) habitat, direct tumour cell behavior, a subtlety that can be easily lost in 2D tissue culture. Here, we investigate a significantly improved tool, consisting of a novel matrix of functionally programmed peptide sequences, self-assembled into a scaffold to enable the growth and the migration of multicellular lung tumour spheroids, as proof-of-concept. This 3D functional model aims to mimic the biological, chemical, and contextual cues of an in vivo tumor more closely than a typically used, unstructured hydrogel, allowing spatial and temporal activity modelling. This approach shows promise as a cancer model, enhancing current understandings of how tumours progress and spread over time within their microenvironment.
RESUMO
For decades, the study of tissue-engineered skeletal muscle has been driven by a clinical need to treat neuromuscular diseases and volumetric muscle loss. The in vitro fabrication of muscle offers the opportunity to test drug-and cell-based therapies, to study disease processes, and to perhaps, one day, serve as a muscle graft for reconstructive surgery. This study developed a biofabrication technique to engineer muscle for research and clinical applications. A bioprinting protocol was established to deliver primary mouse myoblasts in a gelatin methacryloyl (GelMA) bioink, which was implanted in an in vivo chamber in a nude rat model. For the first time, this work demonstrated the phenomenon of myoblast migration through the bioprinted GelMA scaffold with cells spontaneously forming fibers on the surface of the material. This enabled advanced maturation and facilitated the connection between incoming vessels and nerve axons in vivo without the hindrance of a scaffold material. Immunohistochemistry revealed the hallmarks of tissue maturity with sarcomeric striations and peripherally placed nuclei in the organized bundles of muscle fibers. Such engineered muscle autografts could, with further structural development, eventually be used for surgical reconstructive purposes while the methodology presented here specifically has wide applications for in vitro and in vivo neuromuscular function and disease modelling.
RESUMO
The debilitating effects of muscle damage, either through ischemic injury or volumetric muscle loss (VML), can have significant impacts on patients, and yet there are few effective treatments. This challenge arises when function is degraded due to significant amounts of skeletal muscle loss, beyond the regenerative ability of endogenous repair mechanisms. Currently available surgical interventions for VML are quite invasive and cannot typically restore function adequately. In response to this, many new bioengineering studies implicate 3D bioprinting as a viable option. Bioprinting for VML repair includes three distinct phases: printing and seeding, growth and maturation, and implantation and application. Although this 3D bioprinting technology has existed for several decades, the advent of more advanced and novel printing techniques has brought us closer to clinical applications. Recent studies have overcome previous limitations in diffusion distance with novel microchannel construct architectures and improved myotubule alignment with highly biomimetic nanostructures. These structures may also enhance angiogenic and nervous ingrowth post-implantation, though further research to improve these parameters has been limited. Inclusion of neural cells has also shown to improve myoblast maturation and development of neuromuscular junctions, bringing us one step closer to functional, implantable skeletal muscle constructs. Given the current state of skeletal muscle 3D bioprinting, the most pressing future avenues of research include furthering our understanding of the physical and biochemical mechanisms of myotube development and expanding our control over macroscopic and microscopic construct structures. Further to this, current investigation needs to be expanded from immunocompromised rodent and murine myoblast models to more clinically applicable human cell lines as we move closer to viable therapeutic implementation.
RESUMO
Synthetic materials designed for improved biomimicry of the extracellular matrix must contain fibrous, bioactive, and mechanical cues. Self-assembly of low molecular weight gelator (LMWG) peptides Fmoc-DIKVAV (Fmoc-aspartic acid-isoleucine-lysine-valine-alanine-valine) and Fmoc-FRGDF (Fmoc-phenylalanine-arginine-glycine-aspartic acid-phenylalanine) creates fibrous and bioactive hydrogels. Polysaccharides such as agarose are biocompatible, degradable, and non-toxic. Agarose and these Fmoc-peptides have both demonstrated efficacy in vitro and in vivo. These materials have complementary properties; agarose has known mechanics in the physiological range but is inert and would benefit from bioactive and topographical cues found in the fibrous, protein-rich extracellular matrix. Fmoc-DIKVAV and Fmoc-FRGDF are synthetic self-assembling peptides that present bioactive cues "IKVAV" and "RGD" designed from the ECM proteins laminin and fibronectin. The work presented here demonstrates that the addition of agarose to Fmoc-DIKVAV and Fmoc-FRGDF results in physical characteristics that are dependent on agarose concentration. The networks are peptide-dominated at low agarose concentrations, and agarose-dominated at high agarose concentrations, resulting in distinct changes in structural morphology. Interestingly, at mid-range agarose concentration, a hybrid network is formed with structural similarities to both peptide and agarose systems, demonstrating reinforced mechanical properties. Bioactive-LMWG polysaccharide hydrogels demonstrate controllable microenvironmental properties, providing the ability for tissue-specific biomaterial design for tissue engineering and 3D cell culture.
Assuntos
Hidrogéis , Peptídeos , Materiais Biocompatíveis , Fenilalanina , PolissacarídeosRESUMO
For decades, electrode-tissue interfaces are pursued to establish electrical stimulation as a reliable means to control neuronal cells behavior. However, spreading of electrical currents in tissues limits its spatial precision. Thus, optical cues, such as near-infrared (NIR) light, are explored as alternatives. Presently, NIR stimulation requires higher energy input than electrical methods despite introduction of light absorbers, e.g., gold nanoparticles. As potential solution, NIR and electrical costimulation are proposed but with limited interfaces capable of sustaining this stimulation technique. Here, a novel electroactive nanocomposite with photoactive properties in the NIR range is constructed by N-(3-dimethylaminopropyl)-N'-ethylcarbodiimide hydrochloride/N-hydroxysulfosuccinimide sodium (EDC)/NHS conjugation of liquid crystal graphene oxide (LCGO) to protein-coated gold nanorods (AuNR). The liquid crystal graphene oxide-gold nanorod nanocomposite (LCGO-AuNR) is fabricated into a hydrophilic electrode-coating via drop-casting, making it appropriate for versatile electrode-tissue interface fabrication. UV-vis spectrophotometry results demonstrate that LCGO-AuNR presents an absorbance peak at 798 nm (NIR range). Cyclic voltammetry measurements further confirm its electroactive capacitive properties. Furthermore, LCGO-AuNR coating supports cell adhesion, proliferation, and differentiation of NG108-15 neuronal cells. This biocompatible interface is anticipated, with ideal electrical and optical properties for NIR and electrical costimulation, to enable further development of the technique for energy-efficient and precise neuronal cell modulation.
Assuntos
Materiais Biocompatíveis/química , Ouro/química , Grafite/química , Cristais Líquidos/química , Nanopartículas Metálicas/química , Nanotubos/química , Animais , Adesão Celular/efeitos dos fármacos , Diferenciação Celular/efeitos dos fármacos , Linhagem Celular , Proliferação de Células/efeitos dos fármacos , Camundongos , Microscopia de Força Atômica , Microscopia Eletrônica de Transmissão , Ratos , Espectroscopia de Infravermelho com Transformada de FourierRESUMO
The material properties of natural tissues, such as skeletal muscle, are highly sophisticated and are synthetically challenging to mimic. Using natural biomacromolecules to functionalize self-assembled peptide (SAP) hydrogels has the potential to increase the utility of these materials by more closely reproducing the natural cellular environment. Here, to demonstrate that a conserved co-assembly pathway can retain distinct function, the biocompatible peptide derivative Fmoc-FRGDF was co-assembled with either a sulfated polysaccharide, fucoidan, or the provisional matrix proteoglycan, versican. Our results demonstrate that thermodynamically driven co-assembly with biologically active macromolecules is facile, stable, and does not affect the final assembled nanostructure. Biologically, the incorporation of these functionally distinct molecules had no effect on C2C12 myoblast proliferation and viability but strongly altered their morphology. The surface area of myoblasts cultured on the fucoidan scaffold was reduced at 24 and 72 h post seeding, with a reduction in the formation of multinucleated syncytia. Myoblasts cultured on versican scaffolds were smaller compared to cells grown on the empty vector scaffolds at 24 h but not 72 h post seeding, with multinucleated syncytia formation being unaffected. This work allows programmed and distinct morphological effects of cell behavior, paving the way for further mechanistic studies.
Assuntos
Proliferação de Células , Mioblastos Esqueléticos/metabolismo , Nanoestruturas/química , Peptídeos/química , Polissacarídeos/química , Alicerces Teciduais/química , Versicanas/química , Sobrevivência Celular , Células HEK293 , Humanos , Mioblastos Esqueléticos/citologiaRESUMO
Self-assembling peptides (SAPs) are a relatively new class of low molecular weight gelators which immobilize their solvent through the spontaneous formation of (fibrillar) nanoarchitectures. As peptides are derived from proteins, these hydrogels are ideal for use as biocompatible scaffolds for regenerative medicine. Importantly, due to the propensity of peptide sequences to act as signals in nature, they are easily functionalized to be cell instructive via the inclusion of bioactive epitopes. In nature, the fibronectin peptide sequence, arginine-glycine-aspartic acid (RGD) synergistically promotes the integrin α5ß1 mediated cell adhesion with another epitope, proline-histidine-serine-arginine-asparagine (PHSRN); however most functionalization strategies focus on RGD alone. Here, for the first time, we discuss the biomimetic inclusion of both these sequences within a self-assembled minimalistic peptide hydrogel. Here, based on our work with Fmoc-FRGDF (N-flourenylmethyloxycarbonyl phenylalanine-arginine-glycine-aspartic acid-phenylalanine), we show it is possible to present two epitopes simultaneously via the assembly of the epitopes by the coassembly of two SAPs, and compare this to the effectiveness of the signals in a single peptide; Fmoc-FRGDF: Fmoc-PHSRN (N-flourenylmethyloxycarbonyl-proline-histidine-serine-arginine-asparagine) and Fmoc-FRGDFPHSRN (N-flourenylmethyloxycarbonyl-phenylalanine-arginine-glycine-asparticacid-phenylalanine-proline-histidine-serine-arginine-asparagine). We show both produced self-supporting hydrogel underpinned by entangled nanofibrils, however, the stiffness of coassembled hydrogel was over two orders of magnitude higher than either Fmoc-FRGDF or Fmoc-FRGDFPHSRN alone. In-vitro three-dimensional cell culture of human mammary fibroblasts on the hydrogel mixed peptide showed dramatically improved adhesion, spreading and proliferation over Fmoc-FRGDF. However, the long peptide did not provide effective cell attachment. The results demonstrated the selective synergy effect of PHSRN with RGD is an effective way to augment the robustness and functionality of self-assembled bioscaffolds.
RESUMO
The ability to fabricate artificial tissue constructs through the controlled organisation of cells, structures and signals within a biomimetic scaffold offers significant promise to the field of regenerative medicine, drug delivery and tissue engineering. Advances in additive manufacturing technologies have facilitated the printing of spatially defined cell-laden artificial tissue constructs capable of providing biomimetic spatiotemporal presentation of biological and physical cues to cells in a designed multicomponent structure. Despite significant progress in the field of bioprinting, a key challenge remains in developing and utilizing materials that can adequately recapitulate the complexities of the native extracellular matrix on a nanostructured, chemical level during the printing process. This gives rise to the need for suitable materials - particularly in establishing effective control over cell fate, tissue vascularization and innervation. Recently, significant interested has been invested into developing candidate materials using protein and peptide-derived biomaterials. The ability of these materials to form highly printable hydrogels which are reminiscent of the native ECM has seen significant use in a variety of regenative applications, including both organ bioprinting and non-organ bioprinting. Here, we discuss the emerging technologies for peptide-based bioprinting applications, highlighting bioink development and detailing bioprinter processors. Furthermore, this work presents application specific, peptide-based bioprinting approaches, and provides insight into current limitations and future perspectives of peptide-based bioprinting techniques.
Assuntos
Materiais Biocompatíveis/química , Bioimpressão/métodos , Peptídeos/química , Proteínas/química , Animais , Materiais Biocompatíveis/metabolismo , Biomimética/métodos , Matriz Extracelular/química , Matriz Extracelular/metabolismo , Humanos , Hidrogéis/química , Hidrogéis/metabolismo , Peptídeos/metabolismo , Proteínas/metabolismo , Medicina Regenerativa/métodos , Engenharia Tecidual/métodos , Alicerces Teciduais/químicaRESUMO
Enabling control over macromolecular ordering and the spatial distribution of structures formed via the mechanisms of molecular self-assembly is a challenge that could yield a range of new functional materials. In particular, using the self-assembly of minimalist peptides, to drive the incorporation of large complex molecules will allow a functionalization strategy for the next generation of biomaterial engineering. Here, for the first time, we show that co-assembly with increasing concentrations of a highly charged polysaccharide, fucoidan, the microscale ordering of Fmoc-FRGDF peptide fibrils and subsequent mechanical properties of the resultant hydrogel can be easily and effectively manipulated without disruption to the nanofibrillar structure of the assembly.
Assuntos
Materiais Biocompatíveis/química , Hidrogéis/química , Oligopeptídeos/química , Polissacarídeos/química , Configuração de Carboidratos , Fluorenos/química , Humanos , Substâncias Macromoleculares , Teste de Materiais , Polissacarídeos/ultraestrutura , ReologiaRESUMO
Microfluidic systems enable rapid diagnosis, screening and monitoring of diseases and health conditions using small amounts of biological samples and reagents. Despite these remarkable features, conventional microfluidic systems rely on bulky expensive external equipment, which hinders their utility as powerful analysis tools outside of research laboratories. 'Self-contained' microfluidic systems, which contain all necessary components to facilitate a complete assay, have been developed to address this limitation. In this review, we provide an in-depth overview of self-contained microfluidic systems. We categorise these systems based on their operating mechanisms into three major groups: passive, hand-powered and active. Several examples are provided to discuss the structure, capabilities and shortcomings of each group. In particular, we discuss the self-contained microfluidic systems enabled by active mechanisms, due to their unique capability for running multi-step and highly controllable diagnostic assays. Integration of self-contained microfluidic systems with the image acquisition and processing capabilities of smartphones, especially those equipped with accessory optical components, enables highly sensitive and quantitative assays, which are discussed. Finally, the future trends and possible solutions to expand the versatility of self-contained, stand-alone microfluidic platforms are outlined.