On the antimicrobial properties and endurance of eugenol and 2-phenylphenol functionalized sol-gel coatings.

Preventing microbiological surface contamination in public spaces is nowadays of high priority. The proliferation of a microbial infection may arise through air, water, or direct contact with infected surfaces. Chemical sanitization is one of the most effective approaches to avoid the proliferation of microorganisms. However, extended contact with chemicals for cleaning purposes such as chlorine, hydrogen peroxide or ethanol may lead to long-term diseases as well as drowsiness or respiratory issues, not to mention environmental issues associated to their use. As a potentially safer alternative, in the present work, the efficacy and endurance of the antimicrobial activity of different sol-gel coatings were studied, where one or two biocides were added to the coating matrix resulting on active groups exposed on the surface. Specifically, the coating formulations were synthesized by the sol-gel method. Using the alkoxide route with acid catalysis a hybrid silica-titania-methacrylate matrix was obtained where aromatic liquid eugenol was added with a double function: as a complexing agent for the chelation of the reaction precursor titanium isopropoxide, and as a biocide. In addition, 2-Phenylphenol, ECHA approved biocide, has also been incorporated to the coating matrix. The antibacterial effect of these coatings was confirmed on Gram-positive (Staphylococcus aureus) and Gram-negative bacteria (Escherichia coli). Additionally, the coatings were non cyto-toxic and displayed virucidal activity. The coating chemical composition was characterized by 29Si NMR, and ATR-FTIR. Furthermore, the thickness and the mechanical properties were characterized by profilometry and nanoindentation, respectively. Finally, the durability of the coatings was studied with tribology tests. Overall, our data support the efficacy of the tested sol-gel coatings and suggest that added features may be required to improve endurance of the antimicrobial effects on operational conditions.

Comparison of Physical-chemical and Mechanical Properties of Chlorapatite and Hydroxyapatite Plasma Sprayed Coatings.

Chlorapatite can be considered a potential biomaterial for orthopaedic applications. Its use as plasma-sprayed coating could be of interest considering its thermal properties and particularly its ability to melt without decomposition unlike hydroxyapatite. Chlorapatite (ClA) was synthesized by a high-temperature ion exchange reaction starting from commercial stoichiometric hydroxyapatites (HA). The ClA powder showed similar characteristics as the original industrial HA powder, and was obtained in the monoclinic form. The HA and ClA powders were plasma-sprayed using a low-energy plasma spraying system with identical processing parameters. The coatings were characterized by physical-chemical methods, i.e. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and Raman spectroscopy, including distribution mapping of the main phases detected such as amorphous calcium phosphate (ACP), oxyapatite (OA), and HA or ClA. The unexpected formation of oxyapatite in ClA coatings was assigned to a side reaction with contaminating oxygenated species (O2, H2O). ClA coatings exhibited characteristics different from HA, showing a lower content of oxyapatite and amorphous phase. Although their adhesion strength was found to be lower than that of HA coatings, their application could be an interesting alternative, offering, in particular, a larger range of spraying conditions without formation of massive impurities.

Histomorphometric study of ion implantation and diamond-like carbon as dental implant surface treatments in beagle dogs.

PURPOSE: Improvements in the bone-implant interface can provide clinical benefits, such as increasing the amount of bone in contact with the implant and shortening the time required to achieve sufficient bone appositioning to allow early prosthetic loading. The present study describes the results obtained with 2 new surface treatments: (a) CO ion implantation; and (b) diamond-like carbon (DLC) coating. MATERIALS AND METHODS: Each group (ion implantation, DLC, and the control group, turned titanium) consisted of 12 samples. Beagle dogs subjected to previous partial edentulation were used. Dual histologic evaluation was made of percentage bone-implant contact (% BIC) of all samples based on conventional histomorphometric analysis and environmental scanning electron microscopy (ESEM). RESULTS: The results obtained after 3 and 6 months of dental implant placement showed greater and faster bone integration in the CO ion implantation group (61% and 62% BIC, respectively) compared with the DLC group (47% and 50%); the data corresponding to the ion implanted samples were statistically significant compared with the control group (33% and 49% BIC after 3 and 6 months, respectively). CONCLUSIONS: The results showed improved % BIC for implants with ion-implanted surfaces in comparison to DLC coating and machined controls. Furthermore, bone integration appeared to be accelerated in the ion implantation group, since high % BIC values were recorded in the early stages after in vivo implantation.