The erythropoietin-derived peptide ARA 284 reduces tissue wasting and improves survival in a rat model of cancer cachexia.

BACKGROUND: Cancer cachexia (CC) is a severe complication during the last stages of the disease, which is characterized by the substantial loss of muscle and fat mass. Currently, there is no effective treatment of CC. Erythropoietin plays tissue-protective role in different tissues. Based on the structure of erythropoietin, small non-erythropoietic peptides were synthesized, which activate tissue-protective signalling pathways. METHODS: Here, we investigated the influence of the tissue-protective peptide ARA 284 on CC in rats using the Yoshida hepatoma model. RESULTS: Treatment with ARA 284 (1.7 µg/kg/day) counteracted the loss of body weight (12.46 ± 4.82% ARA 284 vs. 26.85 ± 0.88% placebo, P < 0.01), fat mass (P < 0.01), and lean mass (P < 0.01). It improved spontaneous activity of ARA 284-treated animals. Further, gastrocnemius mass was increased (13.2% ARA 284 vs. placebo, P < 0.01) in association with induced p-Akt (P < 0.01) and decreased in p-p38 MAPK, GSK-3ß, and myostatin (all P < 0.01), suggesting an induction of anabolic pathways. At the same time, we observed the significant increase in the survival of animals by high-dose ARA 284 treatment (hazard ratio: 0.46, 95% confidence interval: 0.23-0.94, P = 0.0325). CONCLUSIONS: Taken together these results suggest that ARA 284 can be considered beneficial in experimental CC and it remains to be seen, if it can have similar beneficial effects in CC patient.

Type of vaccine and immunosuppressive therapy but not diagnosis critically influence antibody response after COVID-19 vaccination in patients with rheumatic disease.

OBJECTIVE: The development of sufficient COVID-19 vaccines has been a big breakthrough in fighting the global SARS-CoV-2 pandemic. However, vaccination effectiveness can be reduced in patients with autoimmune rheumatic diseases (AIRD). The aim of this study was to identify factors that lead to a diminished humoral vaccination response in patients with AIRD. METHODS: Vaccination response was measured with a surrogate virus neutralisation test and by testing for antibodies directed against the receptor-binding-domain (RBD) of SARS-CoV-2 in 308 fully vaccinated patients with AIRD. In addition, 296 immunocompetent participants were investigated as a control group. Statistical adjusted analysis included covariates with a possible influence on antibody response. RESULTS: Patients with AIRD showed lower antibody responses compared with immunocompetent individuals (median neutralising capacity 90.8% vs 96.5%, p<0.001; median anti-RBD-IgG 5.6 S/CO vs 6.7 S/CO, p<0.001). Lower antibody response was significantly influenced by type of immunosuppressive therapy, but not by rheumatic diagnosis, with patients under rituximab therapy developing the lowest antibody levels. Patients receiving mycophenolate, methotrexate or janus kinase inhibitors also showed reduced vaccination responses. Additional negative influencing factors were vaccination with AZD1222, old age and shorter intervals between the first two vaccinations. CONCLUSION: Certain immunosuppressive therapies are associated with lower antibody responses after vaccination. Additional factors such as vaccine type, age and vaccination interval should be taken into account. We recommend antibody testing in at-risk patients with AIRD and emphasise the importance of booster vaccinations in these patients.

Hydroxychloroquine in patients with inflammatory and erosive osteoarthritis of the hands: results of the OA-TREAT study-a randomised, double-blind, placebo-controlled, multicentre, investigator-initiated trial.

OBJECTIVES: Hand osteoarthritis (OA) is a condition characterised by cartilage degradation and frequently erosive changes. Analgesics and non-steroidal anti-inflammatory drugs are used for symptomatic relief but are often poorly tolerated or contraindicated. Previous publications suggest hydroxychloroquine (HCQ) as a possible treatment for hand OA. The OA-TREAT study aimed to investigate the efficacy and safety of HCQ in patients with inflammatory and erosive hand OA (EOA). METHODS: OA-TREAT was an investigator-initiated, multicentre, randomised, double-blind, placebo (PBO)-controlled trial. Patients with inflammatory and EOA, according to the ACR criteria, with radiographically erosive disease were randomised 1:1 to HCQ 200-400 mg/day or PBO for 52 weeks (W52). Both groups received stable standard therapy. The primary endpoint was Australian Canadian Hand Osteoarthritis Index (AUSCAN) for pain and hand disability at W52. RESULTS: 75 patients were randomised to HCQ and 78 to PBO. At W52, mean AUSCAN pain was 26.7 in HCQ and 26.5 in PBO patients (p=0.92). Hand disability measured by AUSCAN function (mean) was 48.1 in HCQ and 51.3 in PBO patients (p=0.36). Changes in radiographic scores did not differ significantly (p>0.05) between treatment groups. There were 7 serious adverse events in the HCQ and 15 in the PBO group. CONCLUSIONS: OA-TREAT is the first large randomised PBO controlled trial focusing on EOA. HCQ was no more effective than PBO for changes in pain, function and radiographic scores in the 52-week period. Overall safety findings were consistent with the known profile of HCQ.

On the Feasibility of Fan-Out Wafer-Level Packaging of Capacitive Micromachined Ultrasound Transducers (CMUT) by Using Inkjet-Printed Redistribution Layers.

Fan-out wafer-level packaging (FOWLP) is an interesting platform for Microelectromechanical systems (MEMS) sensor packaging. Employing FOWLP for MEMS sensor packaging has some unique challenges, while some originate merely from the fabrication of redistribution layers (RDL). For instance, it is crucial to protect the delicate structures and fragile membranes during RDL formation. Thus, additive manufacturing (AM) for RDL formation seems to be an auspicious approach, as those challenges are conquered by principle. In this study, by exploiting the benefits of AM, RDLs for fan-out packaging of capacitive micromachined ultrasound transducers (CMUT) were realized via drop-on-demand inkjet printing technology. The long-term reliability of the printed tracks was assessed via temperature cycling tests. The effects of multilayering and implementation of an insulating ramp on the reliability of the conductive tracks were identified. Packaging-induced stresses on CMUT dies were further investigated via laser-Doppler velocimetry (LDV) measurements and the corresponding resonance frequency shift. Conclusively, the bottlenecks of the inkjet-printed RDLs for FOWLP were discussed in detail.

Fan-Out Wafer and Panel Level Packaging as Packaging Platform for Heterogeneous Integration.

Fan-out wafer level packaging (FOWLP) is one of the latest packaging trends in microelectronics. Besides technology developments towards heterogeneous integration, including multiple die packaging, passive component integration in packages and redistribution layers or package-on-package approaches, larger substrate formats are also targeted. Manufacturing is currently done on a wafer level of up to 12"/300 mm and 330 mm respectively. For a higher productivity and, consequently, lower costs, larger form factors are introduced. Instead of following the wafer level roadmaps to 450 mm, panel level packaging (PLP) might be the next big step. Both technology approaches offer a lot of opportunities as high miniaturization and are well suited for heterogeneous integration. Hence, FOWLP and PLP are well suited for the packaging of a highly miniaturized energy harvester system consisting of a piezo-based harvester, a power management unit and a supercapacitor for energy storage. In this study, the FOWLP and PLP approaches have been chosen for an application-specific integrated circuit (ASIC) package development with integrated SMD (surface mount device) capacitors. The process developments and the successful overall proof of concept for the packaging approach have been done on a 200 mm wafer size. In a second step, the technology was scaled up to a 457 × 305 mm2 panel size using the same materials, equipment and process flow, demonstrating the low cost and large area capabilities of the approach.

Sustained Increase of 25-Hydroxyvitamin D Levels in Healthy Young Women during Wintertime after Three Suberythemal UV Irradiations-The MUVY Pilot Study.

OBJECTIVES: Vitamin D (VitD) deficiency is a health problem prevalent not only in the elderly but also in young adults. The primary objective of our observational pilot study "MUVY" (Mood, UVR, Vitamin D in Young women) was to test both the short-term and long-term effects of a series of three suberythemal UV radiation (UVR) exposures on the VitD status and well-being of young healthy women during winter in a repeat measure design. METHODS: 20 healthy young women (Fitzpatrick skin types I-III, aged 21-25 years) received three full body broad band UVR exposures with an escalating erythemally weighted dose schedule during one week in winter, and completed self-report questionnaires monitoring symptoms of depression (Beck Depression Inventory, BDI) and affective state/well-being (Profile of Mood States, POMS) at baseline and three days after the last UVR exposure. 25-hydroxyvitamin D (25(OH)D) and 1,25-dihydroxyvitamin D (1,25(OH)2D) were measured in serum at baseline, and at study days 8, 36 and 50. RESULTS: Mean baseline 25(OH)D level was 54.3 nmol/L (standard deviation (s.d.) = 24.1), with seven women having VitD deficient status. Relevant symptoms of depression, as indicated by low BDI total scores (0-8), were absent. After the three UVR exposures the increment of 25(OH)D was an average of 13.9 nmol/L (95% confidence interval (CI) = 9.4-18.4) and 26.2 pmol/L (95%CI = 7.2-45.1) for 1,25(OH)2D. Δ25(OH)D, and corresponding baseline levels were significantly and inversely associated (rho = -0.493, p = 0.027). Only 25(OH)D remained significantly increased above baseline for at least six weeks after the last UVR exposure. A strong inverse correlation of the POMS subscale "Vigor/Activity" and the increment in 1,25(OH)2D was found (rho = -0.739, p<0.001) at day 8. CONCLUSIONS: Three suberythemal whole body UVR exposures during one week are a simple and suitable method for improving 25(OH)D levels during winter, for at least six weeks, and especially in young women with VitD deficient status. TRIAL REGISTRATION: German Clinical Trials Register (Deutsches Register Kinischer Studien) DRKS00009274.

Effects of treatment with etanercept versus methotrexate on sleep quality, fatigue and selected immune parameters in patients with active rheumatoid arthritis.

OBJECTIVES: To compare sleep quality, disease activity and patient-reported outcomes such as fatigue and immune parameters in patients with rheumatoid arthritis treated with etanercept (ETA) or methotrexate (MTX). METHODS: Of 36 patients (28-joint Disease Activity Score, DAS28CRP≥3.2) in this 16-week (w), open, prospective study, 19 (11 women) received MTX 12.5-17 mg/w, and 17 (14 women) received ETA 25 mg x 2/w, alone or in combination with MTX. Clinical (DAS28CRP, visual analogue scale), laboratory (C-reactive protein [CRP]), sleep (polysomnography), functional (Multidimensional Fatigue Inventory; Health Assessment Questionnaire-Disability Index (HAQ-DI); 36-item Short-Form Health Survey (SF-36), immunological (humoral/cellular) and neuroendocrine (hormonal) parameters were recorded at baseline (BL), w8 and w16. RESULTS: BL characteristics did not differ significantly between the ETA and MTX groups except disease duration: mean age (years): 48.6±8.8 vs. 49.4±16.6; mean disease duration (months): 19.6±46.3 vs. 81.2±79.2; and DAS28CRP: 4.4±0.9 vs. 4.4±1.7, respectively. DAS28CRP, SF-36, and HAQ-DI improved significantly in both groups from BL to w16 (p≤0.05). The DAS28CRP improvements at w16 (mean changes -1.8 in the ETA group, and -1.4 in MTX group), were not statistically significant from each other. The absolute values of sleep efficiency, total sleep time, and stage 2 sleep duration increased significantly in the ETA group, but no significant changes were reported in the MTX group. CONCLUSIONS: Both therapies improved disease activity, CRP, SF-36 and HAQ-DI, with faster, more pronounced changes in DAS28CRP in the ETA group, which alone had significantly improved sleep parameters.

Hydroxychloroquine in patients with inflammatory and erosive osteoarthritis of the hands (OA TREAT): study protocol for a randomized controlled trial.

BACKGROUND: Osteoarthritis (OA) is a heterogeneous group of conditions with disturbed integrity of articular cartilage and changes in the underlying bone. The pathogenesis of OA is multifactorial and not just a disease of older people. Hydroxychloroquine (HCQ) is a disease-modifying anti-rheumatic drug (DMARD) typically used for the treatment of various rheumatic and dermatologic diseases. Three studies of HCQ in OA, including one abstract and one letter, are available and use a wide variety of outcome measures in small patient populations. Despite initial evidence for good efficacy of HCQ, there has been no randomized, double-blind, and placebo-controlled trial in a larger patient group. In the European League Against Rheumatism (EULAR), evidence-based recommendations for the management of hand OA, HCQ was not included as a therapeutic option because of the current lack of randomized clinical trials. METHODS/DESIGN: OA TREAT is an investigator-initiated, multicenter, randomized, double-blind, placebo-controlled trial. A total of 510 subjects with inflammatory and erosive hand OA, according to the classification criteria of the American College of Rheumatology (ACR), with recent X-ray will be recruited across outpatient sites, hospitals and universities in Germany. Patients are randomized 1:1 to active treatment (HCQ 200 to 400 mg per day) or placebo for 52 weeks. Both groups receive standard therapy (non-steroidal anti-inflammatory drugs [NSAID], coxibs) for OA treatment, taken steadily two weeks before enrollment and continued further afterwards. If disease activity increases, the dose of NSAID/coxibs can be increased according to the drug recommendation. The co-primary clinical endpoints are the changes in Australian-Canadian OA Index (AUSCAN, German version) dimensions for pain and hand disability at week 52. The co-primary radiographic endpoint is the radiographic progression from baseline to week 52. A multiple endpoint test and analysis of covariance will be used to compare changes between groups. All analyses will be conducted on an intention-to-treat basis. DISCUSSION: The OA TREAT trial will examine the clinical and radiological efficacy and safety of HCQ as a treatment option for inflammatory and erosive OA over 12 months. OA TREAT focuses on erosive hand OA in contrast to other current studies on symptomatic hand OA, for example, HERO [Trials 14:64, 2013]. TRIAL REGISTRATION: ISRCTN46445413, date of registration: 05-10-2011.

Induction therapy with adalimumab plus methotrexate for 24 weeks followed by methotrexate monotherapy up to week 48 versus methotrexate therapy alone for DMARD-naive patients with early rheumatoid arthritis: HIT HARD, an investigator-initiated study.

OBJECTIVE: To investigate the long-term effects of induction therapy with adalimumab (ADA) plus methotrexate (MTX) in comparison with placebo (PBO) plus MTX in DMARD-naïve patients with active early rheumatoid arthritis (RA). METHODS: Patients with active early RA (disease duration of ≤12 months) were randomly assigned to receive 40 mg ADA subcutaneously every other week (eow) plus MTX 15 mg/week subcutaneously or PBO plus MTX subcutaneously at 15 mg/week over 24 weeks. Thereafter, all patients received MTX monotherapy up to week 48. The primary outcome was the Disease Activity Score 28 (DAS28) at week 48. Secondary outcomes included proportions of patients in remission (DAS28<2.6), ACR responses, Health Assessment Questionnaire (HAQ) score and radiographic progression. RESULTS: 87 patients were assigned to ADA/MTX and 85 patients to PBO/MTX. At baseline, DAS28 was 6.2±0.8 in the ADA/MTX and 6.3±0.9 in the PBO/MTX groups. At week 24, treatment with ADA/MTX compared with PBO/MTX resulted in a greater reduction in DAS28 (3.0±1.2 vs 3.6±1.4; p=0.009) and other secondary outcomes such as DAS28 remission rate (47.9% vs 29.5%; p=0.021) and HAQ (0.49±0.6 vs 0.72±0.6; p=0.0014). At week 48, the difference in clinical outcomes between groups was not statistically significant (DAS28: 3.2±1.4 vs 3.4±1.6; p=0.41). Radiographic progression at week 48 was significantly greater in patients administered PBO/MTX (Sharp/van der Heijde score: ADA/MTX 2.6 vs PBO/MTX 6.4; p=0.03, Ratingen score: 1.7 vs 4.2; p=0.01). CONCLUSIONS: A greater reduction in radiographic progression after initial combination therapy with ADA and MTX was seen at week 48, even after discontinuation of ADA treatment at week 24. This sustained effect was not found at the primary endpoint (DAS28 reduction).

Effects of biomaterials for Lab-on-a-chip production on cell growth and expression of differentiated functions of leukemic cell lines.

The rapid increase of the applications for Lab-on-a-chip devices has attracted the interest of researchers and engineers on standard process of the electronics industry for low production costs and large scale development, necessary for disposable applications. The printed circuit board technology could be used for this purpose, in particular for the wide range of materials available. In this paper, assays on biocompatibility of materials used for Lab-on-a-chip fabrication has been carried out using two tumor cell lines growing in suspension, the human chronic myelogenous leukemia K562 cell line, able to undergo erythroid differentiation when cultured with chemical inducers, and the lymphoblastoid cell line (LCL), extensively used for screening of cytotoxic T-lymphocytes (CTLs). We have demonstrated that some materials strongly inhibit cell proliferation of both the two cell lines to an extent higher that 70-75%, but only after a prolonged exposure of 3-6 days (Copper, Gold over Nickel, Aramid fiber filled epoxy uncured, b-stage epoxy die attach film, Tesa 4985 adhesive tape, Pyralux uncured, Copper + 1-octodecanethiol). However, when experiments were performed with short incubation time (1 h), only Aramid fiber filled epoxy uncured was cytotoxic. Variation of the results concerning the other materials was appreciable when the experiments performed on two cell lines were compared together. Furthermore, the effects of the materials on erythroid differentiation and CTL-mediated LCL lysis confirmed, in most of the cases, the data obtained in cytotoxic and antiproliferative tests.

The biocompatibility of materials used in printed circuit board technologies with respect to primary neuronal and K562 cells.

Printed circuit board (PCB) technology can be used for producing lab-on-a-chip (LOAC) devices. PCBs are characterized by low production costs and large-scale development, both essential elements in the frame of disposable applications. LOAC platforms have been employed not only for diagnostic and/or analytical purposes, but also for identification and isolation of eukaryotic cells, including cancer and stem cells. Accordingly, the compatibility of the employed materials with the biological system under analysis is critical for the development of LOAC devices to be proposed for efficient and safe cell isolation. In this study, we analyzed the in-vitro compatibility of a large set of materials and surface treatments used for LOAC development and evaluation with quasi-standard PCB processes. Biocompatibility was analyzed on hippocampal primary cells (a model of attached cell cultures), in comparison with the reference K562 cell line (a model of cells growing in suspension). We demonstrate here that some of the materials under study alter survival, organization, morphology and adhesion capacity of hippocampal cells, and inhibit growth and differentiation of K562 cells. Nonetheless, a subset of the materials tested did not negatively affect these functions, thus demonstrating that PCB technology, with some limitations, is suitable for the realization of LOAC devices well compatible at least with these preparations.

Doctor's perception of doctor-patient relationships in emergency departments: What roles do gender and ethnicity play?

BACKGROUND: Emergency departments continuously provide medical treatment on a walk-in basis. Several studies investigated the patient's perception of the doctor-patient relationship, but few have asked doctors about their views. Furthermore, the influence of the patient's ethnicity and gender on the doctor's perception remains largely unanswered. METHODS: Based on data collated in three gynaecology (GYN)/internal medicine (INT) emergency departments in Berlin, Germany, we evaluated the impact of the patient's gender and ethnicity on the doctors' satisfaction with the course of the treatment they provided. Information was gathered from 2.429 short questionnaires completed by doctors and the medical records of the corresponding patients. RESULTS: The patient's ethnicity had a significant impact on the doctors' satisfaction with the doctor-patient relationship. Logistic regression analysis showed that the odds ratio (OR) for physician satisfaction was significantly lower for patients of Turkish origin (OR = 2.6 INT and 5.5 GYN) than for those of German origin. The main reasons stated were problems with communication and a perceived lack of urgency for emergency treatment. The odds ratios for dissatisfaction due to a lack of language skills were 4.48 (INT) and 6.22 (GYN), and those due to perceived lack of urgency for emergency treatment were 0.75 (INT) and 0.63 (GYN). Sex differences caused minor variation. CONCLUSION: The results show that good communication despite language barriers is crucial in providing medical care that is satisfactory to both patient and doctors, especially in emergency situations. Therefore the use of professional interpreters for improved communication and the training of medical staff for improved intercultural competence are essential for the provision of adequate health care in a multicultural setting.