The future of maxillofacial prosthodontics in North America: The role of advanced digital technology and artificial intelligence - A discussion document.

STATEMENT OF PROBLEM: Maxillofacial prosthodontists were advanced digital technology (ADT) adopters early in the new Millennium. The past two decades saw a range of digital enablers emerge including digital imaging (internal and surface), digital surgical planning, digital functional assessment, subtractive and additive manufacturing, navigation, and robotics among others. Artificial Intelligence (AI) is the latest ADT arrival that will be a challenging disruptive technology. ADT has served as a profound change agent in maxillofacial prosthodontics. The intent was to explore the process and level of ADT engagement in maxillofacial prosthodontics. PURPOSE: The purpose was twofold. Firstly, to explore maxillofacial prosthodontic engagement of ADT. Secondly, to develop a discussion document to assist the American Academy of Maxillofacial Prosthetics (AAMP) with establishing a collective awareness and considered opinion on the future of maxillofacial prosthodontics in the digital era. MATERIAL AND METHODS: AAMP member interest in ADT was assessed through analysis of AAMP annual congress programs and publications in the Journal of Prosthetic Dentistry (JPD). The history of the maxillofacial prosthodontic journey to the digital era was undertaken with a selective literature review. The perceptions maxillofacial prosthodontists hold on ADT engagement was assessed through a survey of AAMP members. Developing an understanding of the influence AI was conducted with a review of pertinent literature. RESULTS: From 2011-2020, an annual mean of 38% of papers published in the JPD involved clinical use of ADT. From 2017-2019, 44% of invited presentations at AAMP annual congresses included clinical use of ADT. The journey to the digital era distinguished three periods with formative and consolidation periods influencing the innovation digital era. The AAMP member survey had a 59% response rate and studied 10 domains through 31 questions. Of the respondents, 89% thought ADT important to the future of maxillofacial prosthodontics. CONCLUSIONS: The discussion document will assist the AAMP in developing a collective consciousness and considered opinion on ADT in the future of maxillofacial prosthodontics. Members of the AAMP have a developed interest in clinical applications of ADT. A great challenge is that no formal education, training, or clinical competency requirements for ADT could be identified. Clinical competency requirements are important to prepare maxillofacial prosthodontics for the inevitability of a digital era future. The discussion document poses the fundamental question of whether maxillofacial prosthodontists will remain as passive end users of ADT and AI or will they become engaged knowledge workers that have determined clinical competency in ADT and AI in patient care. Without this knowledge worker role, maxillofacial prosthodontists may experience difficulty being part of the inevitable ADT-AI driven future.

The future of maxillofacial prosthodontics in North America: Part II - A survey.

STATEMENT OF PROBLEM: Head and neck care has been transformed by the introduction of advanced digital technologies that will continue to be important change drivers for maxillofacial prosthodontics. Insight into these changes is important in answering the question of whether maxillofacial prosthodontics is appropriately prepared to contribute effectively to future multidisciplinary care of the head and neck. PURPOSE: The purpose of this survey was to gain insight into the perception of changes experienced by maxillofacial prosthodontists in relation to clinical practice. The findings of this survey may assist the future development of the subspecialty. MATERIAL AND METHODS: An exploratory cross-sectional survey was conducted by using a convenience sample of members of the American Academy of Maxillofacial Prosthetics. The survey considered 10 domains and 31 questions. Fully completed surveys (164) provided a 59% response. Descriptive statistics used percentage responses to reduce and characterize perceptions across respondents. RESULTS: Eighty-four percent of the respondents were from the United States. Results should be interpreted based on this cohort. Respondents reported a change in care delivered over the past 10 years (72%), with the most important causes of change attributed to surgery (60%) and advanced digital technologies (56%). Respondents perceived advanced digital technologies as being central to the future of maxillofacial prosthodontics (89%) and important in attracting younger colleagues (88%). Sixty-three percent believed training programs were not providing adequate education and training in the use of advanced digital technology. CONCLUSIONS: The perception of maxillofacial prosthodontists regarding changes taking place in care delivery was that the most important changes in the past 10 years were attributed to surgery and advanced digital technologies, that persisting pressures related to few institutional positions, that the subspecialty was poorly visible, that remuneration for care was inadequate and referring disciplines did not understand the subspecialty, that advanced digital technologies were considered central to the future of maxillofacial prosthodontics and important to attract younger colleagues to the subspecialty, that barriers to advanced digital technology use included funding for equipment acquisition, institutional funding support, and remuneration for their use in care delivery, and that maxillofacial prosthodontic programs were not providing adequate education and training in advanced digital technologies.

The future of maxillofacial prosthodontics in North America: Part I-Journey to the present.

STATEMENT OF PROBLEM: Understanding how maxillofacial prosthodontists are perceiving changes in head and neck care and the impact of advanced digital technologies on maxillofacial prosthodontics is important. However, no studies could be identified that specifically addressed these subjects. PURPOSE: The purpose of this review of selected literature was to identify issues that guided the development of maxillofacial prosthodontics and the concerns that persist. The review also considered contemporary influences that will affect the future of maxillofacial prosthodontics. The conclusions of the review were used to interpret the results of the exploratory survey reported in Part II. MATERIAL AND METHODS: The review of selected literature was related to the development of maxillofacial prosthodontics in North America between 1950 and 2018. Literature that was considered relevant to the purpose of the review was included. RESULTS: The review yielded 37 references of interest: 34 peer-reviewed publications, 1 guideline, 1 historical publication, and 1 website. Periods in the development of maxillofacial prosthodontics in North America were identified as formation, consolidation, and innovation. CONCLUSIONS: It was concluded that concerns in subspecialty programs and clinical practice had origins in the formation and consolidation periods. These persisting concerns extended into the innovation period. Contemporary influences in head and neck surgery will continue to affect the future of maxillofacial prosthodontics. Advanced digital technologies appeared to be central to driving change. Understanding the evolution of maxillofacial prosthodontics was an important first step in providing context when interpreting the results of a survey of maxillofacial prosthodontists reported as Part II of this work.

Autologous Reconstruction of a Face Transplant Candidate.

Since 2005, facial transplantation has emerged as a viable reconstructive option for the most severe defects not amenable to conventional reconstructive techniques, with promising aesthetic and functional outcomes to date. Key facial subunits and midface structures such as the eyelids, lips, and nose are now able to be successfully replaced rather than reconstructed, enabling adequate functional outcomes in even the most extensive defects. However, even in cases of severe facial disfigurement, the decision to proceed with transplantation versus autologous reconstruction remains a source of debate, with no current consensus regarding precise indications and inclusion/exclusion criteria. This report details the case of a candidate referred for face transplantation who ultimately underwent autologous facial reconstruction. Through this representative case, our objective is to clarify the criteria that make a patient a suitable face transplant candidate, as well as to demonstrate the outcomes achievable with a conventional autologous reconstruction, using a methodically planned, multistaged approach.

Three-Dimensional Analysis of Donor Masks for Facial Transplantation.

BACKGROUND: Face transplant teams have an ethical responsibility to restore the donor's likeness after allograft procurement. This has been achieved with masks constructed from facial impressions and three-dimensional printing. The authors compare the accuracy of conventional impression and three-dimensional printing technology. METHODS: For three subjects, a three-dimensionally-printed mask was created using advanced three-dimensional imaging and PolyJet technology. Three silicone masks were made using an impression technique; a mold requiring direct contact with each subject's face was reinforced by plaster bands and filled with silicone. Digital models of the face and both masks of each subject were acquired with Vectra H1 Imaging or Artec scanners. Each digital mask model was overlaid onto its corresponding digital face model using a seven-landmark coregistration; part comparison was performed. The absolute deviation between each digital mask and digital face model was compared with the Mann-Whitney U test. RESULTS: The absolute deviation (in millimeters) of each digitally printed mask model relative to the digital face model was significantly smaller than that of the digital silicone mask model (subject 1, 0.61 versus 1.29, p < 0.001; subject 2, 2.59 versus 2.87, p < 0.001; subject 3, 1.77 versus 4.20, p < 0.001). Mean cost and production times were $720 and 40.2 hours for three-dimensionally printed masks, and $735 and 11 hours for silicone masks. CONCLUSIONS: Surface analysis shows that three-dimensionally-printed masks offer greater surface accuracy than silicone masks. Greater donor resemblance without additional risk to the allograft may make three-dimensionally-printed masks the superior choice for face transplant teams. CLINICAL QUESTION/LEVEL OF EVIDENCE: Therapeutic, V.

Dental considerations and the role of prosthodontics and maxillofacial prosthetics in facial transplantation.

BACKGROUND: Facial transplantation (FT) is a challenging reconstructive endeavor that requires the expertise of a multidisciplinary team. The specific role of maxillofacial prosthodontists has not yet been reported in detail. METHODS: This review considers the contributions of prosthodontists throughout the FT process, from patient selection and dental evaluation to long-term dental rehabilitation of the transplant patient postoperatively. Moreover, considerations of dental management are evaluated. RESULTS: In the almost 40 FT reported in the literature, the most consistently documented contribution by prosthodontists is the fabrication of a donor mask to maintain donor integrity. Though infrequently reported, prosthodontists have the potential to plan and perform a variety of dental procedures and follow-up plans. CONCLUSIONS: When applicable, facial transplant teams are tasked with providing optimal stomatognathic function and dental occlusion to recipients with severe facial disfigurement. The maxillofacial prosthodontist's contribution is crucial to the long-term dental restoration of the edentulous facial transplant candidate, in addition to the fabrication of the donor mask which fulfills the team's ethical responsibilities. PRACTICAL IMPLICATIONS: Maxillofacial prosthodontists play a pivotal role in facial transplantation, particularly when jaw segments are intended for transplantation.

Jaw in a Day: State of the Art in Maxillary Reconstruction.

BACKGROUND: Reconstruction of maxillary defects following tumor extirpation is challenging because of combined aesthetic and functional roles of the maxilla. One-stage reconstruction combining osseous free flaps with immediate osseointegrated implants are becoming the standard for mandibular defects, and have similar potential for maxillary reconstruction. METHODS: A woman with maxillary Ewing sarcoma successfully treated at age 9 with neoadjuvant chemotherapy, right hemimaxillectomy, and obturator prosthetic reconstruction presented for definitive reconstruction, complaining of poor obturator fit, and hypernasality. Her reconstruction was computer-simulated by a multidisciplinary team, consisting of left hemi-Lefort I advancement and right maxillary reconstruction with a free fibula flap with immediate osseointegrated implants and dental prosthesis. RESULTS: Full dental restoration, midface projection, and oral fistula corrections were achieved in 1 operative stage using this approach. CONCLUSIONS: This patient demonstrates a successful approach for maxillary reconstruction using computer-planned orthognathic surgery with free fibula reconstruction and immediate osseointegrated implants with dental prosthesis.

Total Face, Eyelids, Ears, Scalp, and Skeletal Subunit Transplant Cadaver Simulation: The Culmination of Aesthetic, Craniofacial, and Microsurgery Principles.

BACKGROUND: The application of aesthetic, craniofacial, and microsurgical principles in the execution of face transplantation may improve outcomes. Optimal soft-tissue face transplantation can be achieved by incorporating subunit facial skeletal replacement and subsequent tissue resuspension. The purpose of this study was to establish a reconstructive solution for a full face and scalp burn and to evaluate outcome precision and consistency. METHODS: Seven mock face transplants (14 cadavers) were completed in the span of 1 year. Components of the vascularized composite allograft included the eyelids, nose, lips, facial muscles, oral mucosa, total scalp, and ears; and skeletal subunits of the zygoma, nasal bone, and genial segment. Virtual surgical planning was used for osteotomy selection, and to evaluate postoperative precision of hard- and soft-tissue elements. RESULTS: Each transplant experience decreased each subsequent transplant surgical time. Prefabricated cutting guides facilitated a faster dissection of both donor and recipient tissue, requiring minimal alteration to the allograft for proper fixation of bony segments during inset. Regardless of donor-to-recipient size discrepancy, ample soft tissue was available to achieve tension-free allograft inset. Differences between virtual transplant simulation and posttransplant measurements were minimal or insignificant, supporting replicable and precise outcomes. CONCLUSIONS: This facial transplant model was designed to optimize reconstruction of extensive soft-tissue defects of the craniofacial region representative of electrical, thermal, and chemical burns, by incorporating skeletal subunits within the allograft. The implementation of aesthetic, craniofacial, and microsurgical principles and computer-assisted technology improves surgical precision, decreases operative time, and may optimize function.

Total Face, Eyelids, Ears, Scalp, and Skeletal Subunit Transplant Research Procurement: A Translational Simulation Model.

BACKGROUND: Cadaveric face transplant models are routinely used for technical allograft design, perfusion assessment, and transplant simulation but are associated with substantial limitations. The purpose of this study was to describe the experience of implementing a translational donor research facial procurement and solid organ allograft recovery model. METHODS: Institutional review board approval was obtained, and a 49-year-old, brain-dead donor was identified for facial vascularized composite allograft research procurement. The family generously consented to donation of solid organs and the total face, eyelids, ears, scalp, and skeletal subunit allograft. RESULTS: The successful sequence of computed tomographic scanning, fabrication and postprocessing of patient-specific cutting guides, tracheostomy placement, preoperative fluorescent angiography, silicone mask facial impression, donor facial allograft recovery, postprocurement fluorescent angiography, and successful recovery of kidneys and liver occurred without any donor instability. Preservation of the bilateral external carotid arteries, facial arteries, occipital arteries, and bilateral thyrolinguofacial and internal jugular veins provided reliable and robust perfusion to the entirety of the allograft. Total time of facial procurement was 10 hours 57 minutes. CONCLUSIONS: Essential to clinical face transplant outcomes is the preparedness of the institution, multidisciplinary face transplant team, organ procurement organization, and solid organ transplant colleagues. A translational facial research procurement and solid organ recovery model serves as an educational experience to modify processes and address procedural, anatomical, and logistical concerns for institutions developing a clinical face transplantation program. This methodical approach best simulates the stressors and challenges that can be expected during clinical face transplantation. CLINICAL QUESTION/LEVEL OF EVIDENCE: Therapeutic, V.

Comparative Study of Early Secondary Nasal Revisions and Costs in Patients With Clefts Treated With and Without Nasoalveolar Molding.

The present study aims to determine the risk of early secondary nasal revisions in patients with complete unilateral and bilateral cleft lip and palate (U/BCLP) treated with and without nasoalveolar molding (NAM) and examine the associated costs of care. A retrospective cohort study from 1990 to 1999 was performed comparing the risk of early secondary nasal revision surgery in patients with a CLP treated with NAM and surgery (cleft lip repair and primary surgical nasal reconstruction) versus surgery alone in a private practice and tertiary level clinic. The NAM treatment group consisted of 172 patients with UCLP and 71 patients with BCLP, whereas the non-NAM-prepared group consisted of 28 patients with UCLP and 5 with BCLP. The risk of secondary nasal revision for patients with UCLP was 3% in the NAM group and 21% in the non-NAM group. The risk of secondary nasal revision for patients with BCLP was 7% in the NAM group compared with 40% in the non-NAM group. Using multicenter averages, the non-NAM revision rates were calculated at 37.8% and 48.5% for U/BCLP, respectively. Applying these risks of revision, NAM treatment led to an estimated savings of between $491 and $4893 depending on the type of cleft. In conclusion, NAM can reduce the number of early secondary nasal revision surgeries and, therefore, reduce the overall cost of care.

Functional outcomes of virtually planned free fibula flap reconstruction of the mandible.

BACKGROUND: The free fibula osteocutaneous flap has become the criterion standard for reconstruction of complex mandibular defects. The authors present their institutional experience with optimization of flap contouring and inset using virtual planning and prefabricated cutting jigs. METHODS: All free fibula-based mandible reconstructions performed at the authors' institution using virtual planning technology between 2009 and 2012 were retrospectively analyzed. The authors evaluated a variety of patient and procedural variables and outcomes. A series of cases performed before virtual planning was reviewed for comparison purposes. RESULTS: Fifty-four reconstructions were performed in 52 patients. Patients were divided evenly between a private university-affiliated medical center and a large county hospital. The most common indications were malignancy (43 percent), ameloblastoma (26 percent), and osteonecrosis/osteomyelitis (23 percent). Thirty percent of patients had irradiation of the recipient site and 38 percent had previous surgery. Sixty-three percent of patients received dental implants, with 47 percent achieving functional dentition. Twenty-five percent of patients had immediate dental implant placement, and 9 percent had immediate dental restoration. Postoperative imaging demonstrated excellent precision and accuracy of flap positioning. Comparison with cases performed before virtual planning demonstrated increased complexity of flap design along with reduced operative time in the virtually planned group. CONCLUSIONS: Preoperative virtual planning along with use of prefabricated cutting jigs allows for precise contouring and positioning of microvascular fibula free flaps in mandibular reconstruction. Using this technique, the authors have achieved unprecedented rates of dental rehabilitation along with reduced operative times. The authors believe that virtual planning technologies are an emerging criterion standard in mandible reconstruction. CLINICAL QUESTION/LEVEL OF EVIDENCE: Therapeutic, IV.

Conventional prosthodontic management of partial edentulism with a resilient attachment-retained overdenture in a patient with a cleft lip and palate: a clinical report.

Recent advances in surgery and orthodontics have resulted in improvements in the management of patients with a cleft lip or palate. Early surgical intervention and bone-grafting procedures have frequently been used to ensure closure of the cleft and continuity of the alveolar bone. However, a need for the prosthodontic management of patients with a cleft palate still exists. Most frequently, the indication is to restore the edentulous spaces located anteriorly in the vicinity of the residual cleft defect. In addition to improving the esthetic outcome, prosthodontic management also is required to restore function, especially occlusion and speech. This clinical report illustrates the management of an adult patient with a unilateral cleft of the lip and palate who required prosthodontic rehabilitation after surgery. The patient had previously undergone multiple surgeries and did not want to consider implant therapy as a treatment option. Thus, the patient was managed with fixed and removable prosthodontics with a maxillary overdenture prosthesis retained by microextracoronal resilient attachments, which were laser welded onto crowns on abutment teeth to obtain a functionally and esthetically acceptable result.

Jaw in a day: total maxillofacial reconstruction using digital technology.

BACKGROUND: Tumors of the mandible are complex, often requiring replacement of bone, soft tissue, and teeth. The fibula flap has become a routine procedure in large tumors of the jaw, providing bone and soft tissue at the time of the resection. In current practice, dental reconstruction is delayed for 3 to 6 months, leaving the patient without teeth in the interim. This can be disfiguring and anxiety provoking for the patient. METHODS: In this article, the authors present three patients with benign tumors of the mandible who underwent virtually guided resection, fibula reconstruction, and insertion of an implant-retained dental prosthesis in one operation. In addition, the authors report their early experience using this technique in the maxilla. RESULTS: The authors present a case series of three patients with benign mandibular tumors and one patient with a benign maxillary tumor who underwent total reconstruction using computer-aided design and computer-aided manufacturing technology in a single stage. CONCLUSIONS: In the right situation, total mandibular reconstruction is possible in a single stage. This is demonstrated by the successful outcomes of these patients. CLINICAL QUESTION/LEVEL OF EVIDENCE: Therapeutic, V.

Incidence of oronasal fistula formation after nasoalveolar molding and primary cleft repair.

The incidence of postoperative complications in cleft care is low. In this 19-year retrospective analysis of cleft lip and palate patients treated with preoperative nasoalveolar molding, we examine the incidence of postoperative oronasal fistulae. The charts of 178 patients who underwent preoperative nasoalveolar molding by the same orthodontist/prosthodontist team and primary cleft lip/palate repair by the same surgeon over a 19-year period were reviewed. Millard, Mohler, Cutting, or Mulliken-type techniques were used for cleft lip repairs. Oxford-, Bardach-, or von Langenbeck-type techniques were used for cleft palate repairs. One nasolabial fistula occurred after primary cleft lip repair (0.56% incidence) and was repaired surgically. Four palatal fistulae (3 at the junction between soft and hard palate and 1 at the right anterior palate near the incisive foramen) occurred, but 3 healed spontaneously. Only 1 palatal fistula (0.71%) required surgical repair. All 5 fistulae occurred within the first 8 years of the study period, with 4 (80%) of 5 occurring within the first 3 years. Although fistula rate may be related to surgeon experience and the evolution of presurgical techniques, nasoalveolar molding in conjunction with nasal floor closure contributes to a low incidence of oronasal fistulae.

Presurgical nasoalveolar molding and primary gingivoperiosteoplasty reduce the need for bone grafting in patients with bilateral clefts.

Preoperative nasoalveolar molding (NAM) in combination with primary gingivoperiosteoplasty (GPP) reduces the need for secondary alveolar bone grafting by 60% in patients with unilateral cleft lip and palate (CL/P). Herein, we investigate the efficacy of NAM and primary GPP in patients with bilateral CL/P. All patients (n = 38) with bilateral CL/P who underwent NAM and primary GPP from 1988 to 1998 with at least 14 years of follow-up were included in this study. Panoramic and periapical radiographs were used to assess dentoalveolar bone formation. A total of 38 patients were identified with median follow-up of 18 years (range 14-26 years). Of the 27 patients who underwent bilateral GPP, 14 (51%) patients had successful dentoalveolar bone formation bilaterally and 13 (49%) had unilateral bone formation. No patient had a bilateral failure. Of the 11 patients who underwent unilateral GPP, 7 (63%) patients had successful dentoalveolar bone formation. Bilateral successful dentoalveolar bone formation following primary bilateral GPP has a dependent probability of 52% and a conditional probability of 82%.

2012 American Board of Pediatric Dentistry College of Diplomates annual meeting: the role of pediatric dentists in the presurgical treatment of infants with cleft lip/cleft palate utilizing nasoalveolar molding.

The pediatric dentist plays a crucial role in the treatment and management of infants born with cleft deformities of the lip, alveolus, and palate. At New York University Langone Medical Center in New York City, 70% of infants with cleft lip/cleft palate (CLCP) are detected on prenatal ultrasound analysis. Thus, the role of the pediatric dentist can start as early as prenatal counseling. Nasoalveolar molding (NAM) is delivered during the first 3 to 5 months of life. During this stage of treatment, the pediatric dentist establishes the foundation of the "cleft dental" home and initiates the first stage of anticipatory guidance. Consequently, parents are educated and motivated to initiate oral hygiene care upon eruption of the first primary teeth. The purpose of this paper was to describe the role of the pediatric dentist in performing nasoalveolar molding and also describe its indications, appliance design, fabrication, biomechanics, complications, and patient management.

A 12-year anthropometric evaluation of the nose in bilateral cleft lip-cleft palate patients following nasoalveolar molding and cutting bilateral cleft lip and nose reconstruction.

BACKGROUND: Patients with bilateral cleft lip-cleft palate have nasal deformities including reduced nasal tip projection, widened ala base, and a deficient or absent columella. The authors compare the nasal morphology of patients treated with presurgical nasoalveolar molding followed by primary lip/nasal reconstruction with age-matched noncleft controls. METHODS: A longitudinal, retrospective review of 77 nonsyndromic patients with bilateral cleft lip-cleft palate was performed. Nasal tip protrusion, alar base width, alar width, columella length, and columella width were measured at five time points spanning 12.5 years. A one-sample t test was used for statistical comparison to an age-matched noncleft population published by Farkas. RESULTS: All five measurements demonstrated parallel, proportional growth in the treatment group relative to the noncleft group. The nasal tip protrusion, alar base width, alar width, columella length, and columella width were not statistically different from those of the noncleft, age-matched control group at age 12.5 years. The nasal tip protrusion also showed no difference in length at 7 and 12.5 years. The alar width and alar base width were significantly wider at the first four time points. CONCLUSIONS: This is the first study to describe nasal morphology following nasoalveolar molding and primary surgical repair in patients with bilateral cleft lip-cleft palate through the age of 12.5 years. In this investigation, the authors have shown that patients with bilateral cleft lip-cleft palate treated at their institution with nasoalveolar molding and primary nasal reconstruction, performed at the time of their lip repair, attained nearly normal nasal morphology through 12.5 years of age.

Nasoalveolar molding improves appearance of children with bilateral cleft lip-cleft palate.

BACKGROUND: Bilateral cleft lip-cleft palate is associated with nasal deformities typified by a short columella. The authors compared nasal outcomes of cleft patients treated with banked fork flaps to those of patients who underwent nasoalveolar molding and primary retrograde nasal reconstruction. METHODS: A retrospective review of 26 consecutive patients with bilateral cleft lip-cleft palate was performed. Group 1 patients (n = 13) had a cleft lip repair and nasal correction with banked fork flaps. Group 2 patients (n = 13) had nonsurgical columellar elongation with nasoalveolar molding followed by cleft lip closure and primary retrograde nasal correction. Group 3 patients (n = 13) were age-matched controls. Columellar length was measured at presentation and at 3 years of age. The number of nasal operations was recorded to 9 years. The Kruskal-Wallis and Tukey-Kramer tests were used for statistical analysis. RESULTS: Initial columellar length was 0.49 +/- 0.37 mm in group 1 and 0.42 +/- 0.62 mm in group 2. Post-nasoalveolar molding columellar length was 4.5 +/- 0.76 mm in group 2. By 3 years of age, columellar length was 3.03 +/- 1.47 mm in group 1, 5.98 +/- 1.09 mm in group 2, and 6.35 +/- 0.99 mm in group 3. Group 2 columellar length was significantly greater (p < 0.001) than that of group 1 and not statistically different from that of group 3 (p > 0.05). All group 1 patients (13 of 13) needed secondary nasal surgery. No nasoalveolar molding patients (zero of 13, group 2) required secondary nasal surgery. CONCLUSION: Nonsurgical columellar elongation with nasoalveolar molding followed by primary retrograde nasal reconstruction restored columellar length to normal by 3 years and significantly reduced the need for secondary nasal surgery.