The Influence of Mesoscopic Surface Structure on the Electrocatalytic Selectivity of CO2 Reduction with UHV-Prepared Cu(111) Single Crystals.

The key role of morphological defects (e.g., irregular steps and dislocations) on the selectivity of model Cu catalysts for the electrocatalytic reduction of CO2 (CO2RR) is illustrated here. Cu(111) single-crystal surfaces prepared under ultrahigh vacuum (UHV) conditions and presenting similar chemical and local microscopic surface features were found to display different product selectivity during the CO2RR. In particular, changes in selectivity from hydrogen-dominant to hydrocarbon-dominant product distributions were observed based on the number of CO2RR electrolysis pretreatment cycles performed prior to a subsequent UHV surface regeneration treatment, which lead to surfaces with seemingly identical chemical composition and local crystallographic structure. However, significant mesostructural changes were observed through a micron-scale microscopic analysis, including a higher density of irregular steps on the samples producing hydrocarbons. Thus, our findings highlight that step edges are key for C-C coupling in the CO2RR and that not only atomistic but also mesoscale characterization of electrocatalytic materials is needed in order to comprehend complex selectivity trends.

Covalent Adsorption of N-Heterocyclic Carbenes on a Copper Oxide Surface.

Tuning the properties of oxide surfaces through the adsorption of designed ligands is highly desirable for several applications, such as catalysis. N-Heterocyclic carbenes (NHCs) have been successfully employed as ligands for the modification of metallic surfaces. On the other hand, their potential as modifiers of ubiquitous oxide surfaces still needs to be developed. Here we show that a model NHC binds covalently to a copper oxide surface under UHV conditions. In particular, we report the first example of a covalent bond between NHCs and oxygen atoms from the oxide layer. This study demonstrates that NHC can also act as a strong anchor on oxide surfaces.

High-Resolution X-ray Photoelectron Spectroscopy of Organometallic (C5H4SiMe3)3LnIII and [(C5H4SiMe3)3LnII]1- Complexes (Ln = Sm, Eu, Gd, Tb).

The capacity of X-ray photoelectron spectroscopy (XPS) to provide information on the electronic structure of molecular organometallic complexes of Ln(II) ions (Ln = lanthanide) has been examined for the first time. XPS spectra were obtained on the air-sensitive molecular trivalent 4fn Cp'3LnIII complexes (Ln = Sm, Eu, Gd, Tb; Cp' = C5H4SiMe3) and compared to those of the highly reactive divalent complexes, [K(crypt)][Cp'3LnII] (crypt = 2.2.2-cryptand), which have either 4fn+1 (Sm, Eu) or 4fn5d1 electron configurations (Gd, Tb). The Ln 4d, Si 2p, and C 1s regions of the Ln(III) and Ln(II) complexes were identified and compared. The metal 4d peaks of these molecular lanthanide complexes were used diagnostically to compare oxidation states. The valence region of the Gd(III) and Gd(II) complexes was also examined with XPS and density function theory/random phase approximation (DFT/RPA) calculations, and this led to the tentative assignment of a signal from the 5d1 electron consistent with a 4f75d1 electron configuration for Gd(II).

Exploring the Solvation of Acetic Acid in Water Using Liquid Jet X-ray Photoelectron Spectroscopy and Core Level Electron Binding Energy Calculations.

Liquid jet X-ray photoelectron spectroscopy was used to investigate changes in the local electronic structure of acetic acid in the bulk of aqueous solutions induced by solvation effects. These effects manifest themselves as shifts in the difference in the carbon 1s binding energy (ΔBE) between the methyl and carboxyl carbons of acetic acid. Furthermore, molecular dynamics simulations, coupled with correlated electronic structure calculations of the first solvation sphere, provide insight into the number of water molecules directly interacting with the carboxyl group that are required to match the ΔBE from the photoelectron spectroscopy experiments. This comparison shows that a single water molecule in the first solvation shell describes the photoelectron ΔBE of acetic acid while at least 20 water molecules are required for the conjugate base, acetate, in aqueous solutions.

Development of a single crystal sample holder for interfacing ultrahigh vacuum and electrochemical experimentation.

Electrocatalyst surfaces prepared under ultrahigh vacuum (UHV) conditions can create model surfaces to better connect theoretical calculations with experimental studies. The development of a single crystal sample holder and inert electrochemical cells prepared with modularity and chemical stability in mind would allow for expensive single crystals to be reused indefinitely in both UHV and electrochemical settings. This sample holder shows reproducible surface preparations for single crystal samples and consistent electrochemical experiments without the introduction of impurities into the surface. The presented setup has been used as a critical piece for the characterization of Cu(111) surfaces under CO2 electrochemical reduction reaction conditions as a test case.

Identifying Structure-Selectivity Correlations in the Electrochemical Reduction of CO2 : A Comparison of Well-Ordered Atomically Clean and Chemically Etched Copper Single-Crystal Surfaces.

The identification of the active sites for the electrochemical reduction of CO2 (CO2 RR) to specific chemical products is elusive, owing in part to insufficient data gathered on clean and atomically well-ordered electrode surfaces. Here, ultrahigh vacuum based preparation methods and surface science characterization techniques are used with gas chromatography to demonstrate that subtle changes in the preparation of well-oriented Cu(100) and Cu(111) single-crystal surfaces drastically affect their CO2 RR selectivity. Copper single crystals with clean, flat, and atomically ordered surfaces are predicted to yield hydrocarbons; however, these were found experimentally to favor the production of H2 . Only when roughness and defects are introduced, for example by electrochemical etching or a plasma treatment, are significant amounts of hydrocarbons generated. These results show that structural and morphological effects are the key factors determining the catalytic selectivity of CO2 RR.

Characterization of Fe2+ Aqueous Solutions with Liquid Jet X-ray Photoelectron Spectroscopy: Chloride Depletion at the Liquid/Vapor Interface Due to Complexation with Fe2.

Liquid jet X-ray photoelectron spectroscopy is used under near ambient pressure conditions to characterize Fe2+ aqueous solutions. Counter ions, such as Cl- and Br- ions, added to the solution lead to changes in the first solvation sphere of the Fe-aqua complex in solution. Binding energy shifts of 0.4 eV to lower binding energy are observed in the Cl 2p spectra, 2 eV to higher binding energy in the Fe 2p spectra and no shifts are observed in the Br 3d spectra. Depletion of the Cl- species is observed at the interface, caused by coordination with Fe2+. Depletion of Cl- at the liquid/vapor interface may have significant impacts on oxidative chemistry at the interface of atmospheric aerosols that contain both chloride and iron. The Cl- complexation with the Fe2+ ions will also affect the Fenton chemistry that is dependent on this metal ion.

Electric and Photoelectric Properties of 3,4-Ethylenedioxythiophene-Functionalized n-Si/PEDOT:PSS Junctions.

Organic/inorganic solid-state junctions play a critical role in tandem artificial photosynthetic devices supported by conducting polymer membranes. Recent work with n-Si/poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) ( PEDOT: PSS) hybrid junctions has shown that the electrical behavior is dominated by the passivating groups present on the silicon surface. In this work, the photovoltaic behavior of n-Si/ PEDOT: PSS was investigated with methyl, thiophene, and 3,4-ethylenedioxythiophene (EDOT) groups covalently attached to the Si(111) surface. X-ray photoelectron spectroscopy results demonstrated that complete monolayer coverage was achieved in 3 h and that the organic passivating groups were retained over two months of exposure to ambient conditions with minimal silicon oxidation. All surfaces investigated exhibited similar light-limited photocurrents and bulk-limited open-circuit voltages, and thiophene produced a dramatic reduction of the fill factor attributed to the formation of trap states at the interface. Furthermore, shunt behavior observed near the power-producing regions for the thiophene and EDOT surfaces is indicative of increased recombination events under forward bias and suggests that hole transport across the interface is enhanced. Thus, thiophene- and EDOT-functionalized Si(111) offer similar stabilities and efficiencies to those of methylated surfaces as well as enhanced hole transport to the PEDOT: PSS interface from the n-Si surfaces.

Electrical Characteristics of the Junction between PEDOT:PSS and Thiophene-Functionalized Silicon Microwires.

Thiophene moieties have been attached to Si microwires (Si MWs) by a two-step chlorination/alkylation reaction method. X-ray photoelectron spectroscopy indicated that saturation of the surface occurred after 30 min of reaction time. Electrical measurements using a standard probe station indicated that the junction between individual thiophene-functionalized Si MWs and the conducting polymer poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate) ( PEDOT: PSS) became more ohmic as more thiophene was added to the MW surface. Under a light-limited current of 20 nA, representative of operation of Si MWs under 1 Sun illumination conditions, the iR loss of thiophene-n-Si MW/PEDOT-PSS contacts was 20 mV, representing an order of magnitude reduction compared with PEDOT-PSS junctions formed with methyl terminated n-Si MWs. Such iR losses are much less than typical catalytic overpotentials for fuel formation, and hence the thiophene-functionalized Si MW contacts will not limit the performance of a Si MW array-based solar fuels device under 1 Sun illumination.

Covalent Attachment of Ferrocene to Silicon Microwire Arrays.

A fully integrated, freestanding device for photoelectrochemical fuel generation will likely require covalent attachment of catalysts to the surface of the photoelectrodes. Ferrocene has been utilized in the past as a model system for molecular catalyst integration on planar silicon; however, the surface structure of high-aspect ratio silicon microwires envisioned for a potential device presents potential challenges with respect to stability, characterization, and mass transport. Attachment of vinylferrocene to Cl-terminated surfaces of silicon microwires was performed thermally. By varying the reaction time, solutions of vinylferrocene in di-n-butyl ether were employed to control the extent of functionalization. X-ray photoelectron spectroscopy (XPS) and electrochemistry were used to estimate the density and surface coverage of the silicon microwire arrays with ferrocenyl groups, which could be controllably varied from 1.23 × 10(-11) to 4.60 × 10(-10) mol cm(-2) or 1 to 30% of a monolayer. Subsequent backfill of the remaining Si-Cl sites with methyl groups produced ferrocenyl-terminated surfaces that showed unchanged cyclic volammograms following two months in air, under ambient conditions, and repeated electrochemical cycling.