RESUMO
Reductant-activated functionalization is shown to enhance the methylation of chemically exfoliated MoS2 (ceMoS2) and ceWS2 by introducing excess negative charge to facilitate a nucleophilic attack reaction. Relative to methylation in the absence of a reductant, the reaction produces a twofold increase in coverage of ceWS2, from 25 to 52% coverage per WS2. However, at every potential, the methyl coverage on ceWS2 was â¼20% lower than that on ceMoS2. We applied grand canonical density functional theory to show that at constant potential, more negative charge is present on 1T'-MoS2 than on 1T'-WS2, making methylation both thermodynamically and kinetically more favorable for 1T'-MoS2 than 1T'-WS2. This effect was moderated when the reactions were compared at constant charge, emphasizing the importance of comparing the reactivity of materials at nominally identical electrode potentials.
RESUMO
The attachment of the 2,2'-bipyridine (bpy) moieties to the surface of planar silicon(111) (photo)electrodes was investigated using ab initio simulations performed on a new cluster model for methyl-terminated silicon. Density functional theory (B3LYP) with implicit solvation techniques indicated that adventitious chlorine atoms, when present in the organic linker backbone, led to instability at very negative potentials of the surface-modified electrode. In prior experimental work, chlorine atoms were present as a trace surface impurity due to required surface processing chemistry, and thus could plausibly result in the observed surface instability of the linker. Free energy calculations for the Cl-atom release process with model silyl-linker constructs revealed a modest barrier (14.9 kcal mol-1) that decreased as the electrode potential became more negative. A small library of new bpy-derived structures has additionally been explored computationally to identify strategies that could minimize chlorine-induced linker instability. Structures with fluorine substituents are predicted to be more stable than their chlorine analogues, whereas fully non-halogenated structures are predicted to exhibit the highest stability. The behavior of a hydrogen-evolving molecular catalyst Cp*Rh(bpy) (Cp* = pentamethylcyclopentadienyl) immobilized on a silicon(111) cluster was explored theoretically to evaluate differences between the homogeneous and surface-attached behavior of this species in a tautomerization reaction observed under reductive conditions for catalytic H2 evolution. The calculated free energy difference between the tautomers is small, hence the results suggest that use of reductively stable linkers can enable robust attachment of catalysts while maintaining chemical behavior on the electrode similar to that exhibited in homogeneous solution.
RESUMO
Integrated photoelectrochemical devices rely on the synergy between components to efficiently generate sustainable fuels from sunlight. The micro- and/or nanoscale characteristics of the components and their interfaces often control critical processes of the device, such as charge-carrier generation, electron and ion transport, surface potentials, and electrocatalysis. Understanding the spatial properties and structure-property relationships of these components can provide insight into designing scalable and efficient solar fuel components and systems. These processes can be probed ex situ or in situ with nanometer-scale spatial resolution using emerging scanning-probe techniques based on atomic force microscopy (AFM). In this Perspective, we summarize recent developments of AFM-based techniques relevant to solar fuel research. We review recent progress in AFM for (1) steady-state and dynamic light-induced surface photovoltage measurements; (2) nanoelectrical conductive measurements to resolve charge-carrier heterogeneity and junction energetics; (3) operando investigations of morphological changes, as well as surface electrochemical potentials, currents, and photovoltages in liquids. Opportunities for research include: (1) control of ambient conditions for performing AFM measurements; (2) in situ visualization of corrosion and morphological evolution of electrodes; (3) operando AFM techniques to allow nanoscale mapping of local catalytic activities and photo-induced currents and potentials.
RESUMO
A new aryl-imido polyoxometalate non-linear optical chromophore (POMophore) with a diphenylamino donor group attains the highest ßzzz, 0 value (196 × 10-30 esu by Hyper-Rayleigh Scattering, HRS), and best transparency/non-linearity trade off yet for such materials. Stark spectroscopic and DFT investigation of this compound, plus NMe2 and carbazole analogues, show that its high performance results from a combination of strongly dipolar electronic transitions, and strong electronic communication across the π-system.
RESUMO
A hybrid photoanode based on a molecular water oxidation precatalyst was prepared from TiO2-protected n- or p+-Si coated with multiwalled carbon nanotubes (CNT) and the ruthenium-based water oxidation precatalyst [RuIV(tda)(py-pyr)2(O)], 1(O) (tda2- is [2,2':6',2â³-terpyridine]-6,6â³-dicarboxylato and py-pir is 4-(pyren-1-yl)-N-(pyridin-4-ylmethyl)butanamide). The Ru complex was immobilized by π-π stacking onto CNTs that had been deposited by drop casting onto Si electrodes coated with 60 nm of amorphous TiO2 and 20 nm of a layer of sputtered C. At pH = 7 with 3 Sun illumination, the n-Si/TiO2/C/CNT/[1+1(O)] electrodes exhibited current densities of 1 mA cm-2 at 1.07 V vs NHE. The current density was maintained for >200 min at a constant potential while intermittently collecting voltammograms that indicated that over half of the Ru was still in molecular form after O2 evolution.
RESUMO
Ten organoimido polyoxometalate (POM)-based chromophores have been synthesized and studied by hyper-Rayleigh scattering (HRS), Stark and Resonance Raman spectroscopies, and density functional theory (DFT) calculations. HRS ß0 values for chromophores with resonance electron donors are significant (up to 139 × 10-30 esu, â¼5 times greater than that of the DAS+ cation), but systems with no donor, or the -NO2 acceptor show no activity, in some cases, despite large DFT-predicted ß-values. In active systems with short (phenyl) π-bridges, ß0 values comfortably exceed that of the purely organic structural analogue N,N-dimethyl-4-nitroaniline (DMPNA), and intrinsic ß-values, ß0/N3/2 (where N is the number of bridge π-electrons) thus appear to break empirical performance limits (ß0/N3/2 vs λmax) for planar organic systems. However, ß0 values obtained for extended systems with a diphenylacetylene bridge are comparable to or lower than that of their nitro analogue, N,N-dimethyl-4-[(4-nitrophenyl)ethynyl]-aniline (DMNPEA). Resonance Raman spectroscopy confirms the involvement of the POM in the electronic transitions, whether donor groups are present or not, but Stark spectroscopy indicates that, in their absence, the transitions have little dipolar character (hence, NLO inactive), consistent with DFT-calculated frontier orbitals, which extend over both POM and organic group. Stark and DFT also suggest that ß is enhanced in the short compounds because the extension of charge transfer (CT) onto the POM increases changes in the excited-state dipole moment. With extended π-systems, this effect does not increase CT distances, relative to a -NO2 acceptor, so ß0 values do not exceed that of DMNPEA. Overall, our results show that (i) the organoimido-POM unit is an efficient acceptor for second-order NLO, but an ineffective donor; (ii) the nature of electronic transitions in arylimido-POMs is strongly influenced by the substituents of the aryl group; and (iii) organoimido-POMs outperform organic acceptors with short π-bridges, but lose their advantage with extended π-conjugation.
RESUMO
Fourteen new dipolar cations have been synthesized, containing methoxy or tertiary amino electron donor groups attached to helquat (Hq) acceptors. These Hq derivatives have been characterized as their TfO- salts by using various techniques including NMR and electronic absorption spectroscopies. UV-vis spectra show intense, relatively low energy absorptions with λmax ≈ 400-600 nm, attributable to intramolecular charge-transfer (ICT) excitations. Single-crystal X-ray structures have been solved for two of the chromophores, one as its PF6- salt, revealing centrosymmetric packing arrangements (space groups Pbca and P1Ì ). Molecular quadratic nonlinear optical (NLO) responses have been determined directly by using hyper-Rayleigh scattering (HRS) with a 800 nm laser, and indirectly via Stark (electroabsorption) spectroscopy for the low energy absorption bands. The obtained static first hyperpolarizabilities ß0 range from moderate to large: (9-140) × 10-30 esu from HRS in MeCN and (44-580) × 10-30 esu from the Stark data in PrCN. The magnitude of ß0 increases upon either extending the π-conjugation length or replacing a methoxy with a tertiary amino electron donor substituent. Density functional theory (DFT) and time-dependent DFT calculations on selected tertiary amino chromophores confirm that the low energy absorptions have ICT character. Relatively good agreement between the simulated and experimental UV-vis absorption spectra is achieved by using the CAM-B3LYP functional with the 6-311G(d) basis set. The ßtot values predicted by using DFT at the same level of theory are large ((472-1443) × 10-30 esu in MeCN). Both the theoretical and experimental results show that para-conjugation between Hq and electron donor fragments is optimal, and enlarging the Hq unit is inconsequential with respect to the molecular quadratic NLO response.
RESUMO
The interfacial properties of electrolessly deposited Pt nanoparticles (Pt-NPs) on p-Si and p+ -Si electrodes were investigated on the nanometer scale using a combination of scanning probe methods. Atomic force microscopy (AFM) showed highly dispersed Pt-NPs with diameters of 20-150â nm on the Si surface. Conductive AFM measurements showed that only approximately half of the particles exhibited measurable contact currents, with a factor of 103 difference in current observed between particles at a given bias. Local current-voltage measurements revealed a rectifying junction with a resistance ≥10â MΩ at the Pt-NP/p-Si interface, whereas the Pt-NP/p+ -Si samples formed an ohmic junction with a local resistance ≥1â MΩ. The particles were strongly attached to the sample surface in air. However, in an electrolyte, the adhesion of the particles to the surface was substantially lower, and most of the particles had tip-contact currents that varied by a factor of approximately 10. Scanning electrochemical microscopy (SECM) showed smaller but more uniform electrochemical currents for the particles relative to the currents observed by conductive AFM. In accord with the conductive AFM measurements, the SECM measurements showed conductance through the substrate for only a minority of the particles. These results suggest that the electrochemical performance of the electrolessly deposited Pt nanoparticles on Si can be ascribed to: 1)â The high resistance of the contact between the particles and the substrate, 2)â the low (<50 %) fraction of particles that support high currents, and 3)â the low adhesion of the particles to the surface when in contact with the electrolyte.
Assuntos
Técnicas Eletroquímicas/métodos , Eletrodos , Microscopia de Força Atômica/métodos , Nanopartículas/química , Platina , Silício , Propriedades de SuperfícieRESUMO
Multimodal nano-imaging in electrochemical environments is important across many areas of science and technology. Here, scanning electrochemical microscopy (SECM) using an atomic force microscope (AFM) platform with a nanoelectrode probe is reported. In combination with PeakForce tapping AFM mode, the simultaneous characterization of surface topography, quantitative nanomechanics, nanoelectronic properties, and electrochemical activity is demonstrated. The nanoelectrode probe is coated with dielectric materials and has an exposed conical Pt tip apex of â¼200 nm in height and of â¼25 nm in end-tip radius. These characteristic dimensions permit sub-100 nm spatial resolution for electrochemical imaging. With this nanoelectrode probe we have extended AFM-based nanoelectrical measurements to liquid environments. Experimental data and numerical simulations are used to understand the response of the nanoelectrode probe. With PeakForce SECM, we successfully characterized a surface defect on a highly-oriented pyrolytic graphite electrode showing correlated topographical, electrochemical and nanomechanical information at the highest AFM-SECM resolution. The SECM nanoelectrode also enabled the measurement of heterogeneous electrical conductivity of electrode surfaces in liquid. These studies extend the basic understanding of heterogeneity on graphite/graphene surfaces for electrochemical applications.
RESUMO
Three new dipolar cations have been synthesised, containing ferrocenyl (Fc) electron donor groups attached to helquat (Hq) acceptors. These organometallic Hq derivatives have been characterised as their TfO- salts by using various techniques including NMR and electronic absorption spectroscopies and electrochemical measurements. UV-vis spectra show multiple intense low energy absorptions attributable to intramolecular charge-transfer (ICT) excitations. Each compound displays a reversible Fc+/0 redox process, together with two reversible one-electron reductions of the Hq fragment. Molecular quadratic nonlinear optical (NLO) responses have been determined by using hyper-Rayleigh scattering at 1064 nm, and Stark (electroabsorption) spectroscopic studies on the visible absorption bands. The obtained first hyperpolarizabilities ß are moderate, consistent with the relatively short π-conjugation lengths between the Fc and attached pyridinium group. A single-crystal X-ray structure has been solved for one of the complexes as its PF6- salt, revealing a centrosymmetric packing in the triclinic space group P1[combining macron]. Density functional theory (DFT) and time-dependent DFT calculations indicate that the lowest energy absorption bands have mainly metal-to-ligand charge-transfer character. The donor orbitals involved in the electronic transitions forming the next lowest energy ICT band also have substantial contributions from the Fe atom. Good agreement between the simulated and experimental UV-vis absorption spectra is achieved by using the PBE0 functional with the 6-311++G(d)/LANL2DZ mixed basis set, and the theoretical ß values are reasonably large. Oxidation of the Fc unit is predicted to cause the ßtot value to decrease by more than 80% in one of the complexes.
RESUMO
Helquat dyes combine a cationic hemicyanine with a helicene-like motif to form a new blueprint for chiral systems with large and tunable nonlinear optical (NLO) properties. We report a series of such species with characterization, including determination of static first hyperpolarizabilities ß0 via hyper-Rayleigh scattering and Stark spectroscopy. The measured ß0 values are similar to or substantially larger than that of the commercial chromophore E-4'-(dimethylamino)-N-methyl-4-stilbazolium. Density functional theory (DFT) and time-dependent DFT calculations on two of the new cations are used to probe their molecular electronic structures and optical properties. Related molecules are expected to show bulk second-order NLO effects in even nonpolar media, overcoming a key challenge in developing useful materials.
RESUMO
We report the synthesis and surface immobilization of two new pyrene-appended molecular metal complexes: a ruthenium tris(bipyridyl) complex (1) and a bipyridyl complex of [Cp*Ir] (2) (Cp* = pentamethylcyclopentadienyl). X-ray photoelectron spectroscopy confirmed successful immobilization on high surface area carbon electrodes, with the expected elemental ratios for the desired compounds. Electrochemical data collected in acetonitrile solution revealed a reversible reduction of 1 near -1.4 V, and reduction of 2 near -0.75 V. The noncovalent immobilization, driven by association of the appended pyrene groups with the surface, was sufficiently stable to enable studies of the molecular electrochemistry. Electroactive surface coverage of 1 was diminished by only 27% over three hours soaking in electrolyte solution as measured by cyclic voltammetry. The electrochemical response of 2 resembled its soluble analogues, and suggested that ligand exchange occurred on the surface. Together, the results demonstrate that noncovalent immobilization routes are suitable for obtaining fundamental understanding of immobilized metal complexes and their reductive electrochemical properties.
RESUMO
The electrocatalytic performance for hydrogen evolution has been evaluated for radial-junction n(+)p-Si microwire (MW) arrays with Pt or cobalt phosphide, CoP, nanoparticulate catalysts in contact with 0.50 M H2SO4(aq). The CoP-coated (2.0 mg cm(-2)) n(+)p-Si MW photocathodes were stable for over 12 h of continuous operation and produced an open-circuit photovoltage (Voc) of 0.48 V, a light-limited photocurrent density (Jph) of 17 mA cm(-2), a fill factor (ff) of 0.24, and an ideal regenerative cell efficiency (ηIRC) of 1.9% under simulated 1 Sun illumination. Pt-coated (0.5 mg cm(-2)) n(+)p-Si MW-array photocathodes produced Voc = 0.44 V, Jph = 14 mA cm(-2), ff = 0.46, and η = 2.9% under identical conditions. Thus, the MW geometry allows the fabrication of photocathodes entirely comprised of earth-abundant materials that exhibit performance comparable to that of devices that contain Pt.
RESUMO
Semiconductors with small band gaps (<2 eV) must be stabilized against corrosion or passivation in aqueous electrolytes before such materials can be used as photoelectrodes to directly produce fuels from sunlight. In addition, incorporation of electrocatalysts on the surface of photoelectrodes is required for efficient oxidation of H2O to O2(g) and reduction of H2O or H2O and CO2 to fuels. We report herein the stabilization of np(+)-Si(100) and n-Si(111) photoanodes for over 1200 h of continuous light-driven evolution of O2(g) in 1.0 M KOH(aq) by an earth-abundant, optically transparent, electrocatalytic, stable, conducting nickel oxide layer. Under simulated solar illumination and with optimized index-matching for proper antireflection, NiOx-coated np(+)-Si(100) photoanodes produced photocurrent-onset potentials of -180 ± 20 mV referenced to the equilibrium potential for evolution of O2(g), photocurrent densities of 29 ± 1.8 mA cm(-2) at the equilibrium potential for evolution of O2(g), and a solar-to-O2(g) conversion figure-of-merit of 2.1%.
RESUMO
Silicon surfaces terminated with a mixed monolayer containing both a propyl aldehyde functionality and methyl groups were prepared and used to control the interfacial chemical and electronic properties of Si(111) surfaces during atomic-layer deposition (ALD) of Al2O3 or MnO. Si(111) surfaces functionalized only with the aldehyde moiety exhibited surface recombination velocities, S, of 2500 ± 600 cm s(-1) whereas the mixed CH3-/HC(O)CH2CH2-Si(111) surfaces displayed S = 25 ± 7 cm s(-1). During the ALD growth of either Al2O3 or MnO, both the HC(O)CH2CH2-Si(111) and CH3-/HC(O)CH2CH2-Si(111) surfaces produced increased metal oxide deposition at low cycle number, relative to H-Si(111) or CH3-Si(111) surfaces. As detected by X-ray photoelectron spectroscopy after the ALD process, the CH3- and mixed CH3-/HC(O)CH2CH2- functionalized Si(111) surfaces exhibited less interfacial SiOx than was observed for ALD of metal oxides on H-Si(111) substrates.
RESUMO
Atomically flat, terraced H-Ge(111) was prepared by annealing in H2(g) at 850 °C. The formation of monohydride Ge-H bonds oriented normal to the surface was indicated by angle-dependent Fourier-transform infrared (FTIR) spectroscopy. Subsequent reaction in CCl3Br(l) formed Br-terminated Ge(111), as shown by the disappearance of the Ge-H absorption in the FTIR spectra concomitant with the appearance of Br photoelectron peaks in X-ray photoelectron (XP) spectra. The Br-Ge(111) surface was methylated by reaction with (CH3)2Mg. These surfaces exhibited a peak at 568 cm(-1) in the high-resolution electron energy loss spectrum, consistent with the formation of a Ge-C bond. The absorption peaks in the FTIR spectra assigned to methyl "umbrella" and rocking modes were dependent on the angle of the incident light, indicating that the methyl groups were bonded directly atop surface Ge atoms. Atomic-force micrographs of CH3-Ge(111) surfaces indicated that the surface remained atomically flat after methylation. Electrochemical scanning-tunneling microscopy showed well-ordered methyl groups that covered nearly all of the surface. Low-energy electron diffraction images showed sharp, bright diffraction spots with a 3-fold symmetry, indicating a high degree of order with no evidence of surface reconstruction. A C 1s peak at 284.1 eV was observed in the XP spectra, consistent with the formation of a C-Ge bond. Annealing in ultrahigh vacuum revealed a thermal stability limit of â¼400 °C of the surficial CH3-Ge(111) groups. CH3-Ge(111) surfaces showed significantly greater resistance to oxidation in air than H-Ge(111) surfaces.
RESUMO
Light absorbers with moderate band gaps (1-2 eV) are required for high-efficiency solar fuels devices, but most semiconducting photoanodes undergo photocorrosion or passivation in aqueous solution. Amorphous TiO2 deposited by atomic-layer deposition (ALD) onto various n-type semiconductors (Si, GaAs, GaP, and CdTe) and coated with thin films or islands of Ni produces efficient, stable photoanodes for water oxidation, with the TiO2 films protecting the underlying semiconductor from photocorrosion in pH = 14 KOH(aq). The links between the electronic properties of the TiO2 in these electrodes and the structure and energetic defect states of the material are not yet well-elucidated. We show herein that TiO2 films with a variety of crystal structures and midgap defect state distributions, deposited using both ALD and sputtering, form rectifying junctions with n-Si and are highly conductive toward photogenerated carriers in n-Si/TiO2/Ni photoanodes. Moreover, the photovoltage of these electrodes can be modified by annealing the TiO2 in reducing or oxidizing environments. All of the polycrystalline TiO2 films with compact grain boundaries investigated herein protected the n-Si photoanodes against photocorrosion in pH = 14 KOH(aq). Hence, in these devices, conduction through the TiO2 layer is neither specific to a particular amorphous or crystalline structure nor determined wholly by a particular extrinsic dopant impurity. The coupled structural and energetic properties of TiO2, and potentially other protective oxides, can therefore be controlled to yield optimized photoelectrode performance.
RESUMO
Reactively sputtered nickel oxide (NiOx) films provide transparent, antireflective, electrically conductive, chemically stable coatings that also are highly active electrocatalysts for the oxidation of water to O2(g). These NiOx coatings provide protective layers on a variety of technologically important semiconducting photoanodes, including textured crystalline Si passivated by amorphous silicon, crystalline n-type cadmium telluride, and hydrogenated amorphous silicon. Under anodic operation in 1.0 M aqueous potassium hydroxide (pH 14) in the presence of simulated sunlight, the NiOx films stabilized all of these self-passivating, high-efficiency semiconducting photoelectrodes for >100 h of sustained, quantitative solar-driven oxidation of water to O2(g).
RESUMO
We report the preparation of a dicobalt compound with two singly proton-bridged cobaloxime units linked by a central [BO4] bridge. Reaction of a doubly proton-bridged cobaloxime complex with trimethyl borate afforded the compound in good yield. Single-crystal X-ray diffraction studies confirmed the bridging nature of the [BO4] moiety. Using electrochemical methods, the dicobalt complex was found to be an electrocatalyst for proton reduction in acetonitrile solution. Notably, the overpotential for proton reduction (954 mV) was found to be higher than in the cases of two analogous single-site cobalt glyoximes under virtually identical conditions.
RESUMO
Silicon(111) surfaces have been functionalized with mixed monolayers consisting of submonolayer coverages of immobilized 4-vinyl-2,2'-bipyridyl (1, vbpy) moieties, with the remaining atop sites of the silicon surface passivated by methyl groups. As the immobilized bipyridyl ligands bind transition metal ions, metal complexes can be assembled on the silicon surface. X-ray photoelectron spectroscopy (XPS) demonstrates that bipyridyl complexes of [Cp*Rh], [Cp*Ir], and [Ru(acac)2] were formed on the surface (Cp* is pentamethylcyclopentadienyl, acac is acetylacetonate). For the surface prepared with Ir, X-ray absorption spectroscopy at the Ir LIII edge showed an edge energy as well as post-edge features that were essentially identical with those observed on a powder sample of [Cp*Ir(bpy)Cl]Cl (bpy is 2,2'-bipyridyl). Charge-carrier lifetime measurements confirmed that the silicon surfaces retain their highly favorable photoelectronic properties upon assembly of the metal complexes. Electrochemical data for surfaces prepared on highly doped, n-type Si(111) electrodes showed that the assembled molecular complexes were redox active. However the stability of the molecular complexes on the surfaces was limited to several cycles of voltammetry.