Label-free electrochemical biosensor for direct detection of Oncostatin M (OSM) inflammatory bowel diseases (IBD) biomarker in human serum.

Oncostatin M (OSM) is an interleukin-6 (IL-6) member family cytokine implicated in the pathogenesis of chronic diseases including inflammatory bowel disease (IBD). OSM is a novel diagnostic biomarker over-expressed in the serum of IBD patients. This paper reports on the first electrochemical OSM immunosensor, developed using a multistep fabrication process aimed at covalently immobilizing OSM antibodies on a mixed self-assembled monolayer coated gold working electrode. Cyclic voltammetry, atomic force microscopy (AFM), IR spectroscopy and optical characterizations were used to validate the sensor functionalization protocol. Electrochemical impedance spectroscopy (EIS) measurements were performed to assess the reliability of the immunosensor preparation and to verify the antibody-antigen complexes formation. The label-free immunosensor showed high sensitivity identifying OSM at clinically relevant concentrations (37-1000 pg mL-1) with low detection limit of 2.86 pg mL-1. Both sensitivity and selectivity of the proposed immunosensor were also demonstrated in human serum in the presence of interfering biomarkers, making it an innovative potential platform for the OSM biomarker detection in IBD patients' serum.

Residential combustion of coal: Effect of the fuel and combustion stage on emissions.

Worldwide coal is still used for household heating purposes not only because it is available and cheap but also due to behavioural issues. Regional variability in fuels and combustion appliances make accurate emission estimates from this source hard to achieve. In the present study, gaseous (CO, VOCs, SO2 and NOX) and particulate matter (TSP) emission factors (EFs) were determined for Spanish household coal combustion covering three commercial coals and distinct combustion stages and mimicking usage patterns in real households. TSP samples were analysed to determine water-soluble inorganic ions, metal(loid)s, and organic and elemental carbon (OC and EC). Additionally, the morphology of the emitted particles was also characterised. CO (3.43-169 g kg-1), NOX (1.29-6.00 g kg-1) and SO2 (8.96-22.3 g kg-1) EFs showed no trend regarding the combustion stage or coal type tested. On the other hand, VOC, TSP and EC EFs were higher for the ignition/devolatilisation combustion stage, regardless of the fuel tested. TSP EFs (0.085-1.08 g kg-1) increased with increasing coal volatile matter while the opposite trend was recorded for VOC emissions (0.045-3.39 gC kg-1). TSP carbonaceous matter was dominated by EC while OC represented a small fraction of the particulate mass emitted (less than 8 %wt.). Inorganic compounds composed an important fraction of the TSP samples. Sulphate particulate mass fractions (8.66-22.9 %wt.) appeared to increase with coal S-content. Coal combustion released particles with diverse morphologies, including silicate-rich particles, ferro- and glassy-spheres. This study provides novel emission factors to update emission inventories of residential coal combustion. Additionally, detailed chemical profiles were obtained for source apportionment.

Understanding the local and remote source contributions to ambient O3 during a pollution episode using a combination of experimental approaches in the Guadalquivir valley, southern Spain.

The Guadalquivir Valley is one of three major O3 hotspots in Spain. An airborne and surface measurement campaign was carried out from July 9th to 11th, 2019 to quantify the local/regional O3 contributions using experimental approaches. Air quality and meteorology data from surface measurements, a microlight aircraft, a helium balloon, and remote sensing data (TROPOMI-NO2-ESA) were used to obtain the 3D distribution of O3 and various tracer pollutants. O3 accumulation over 2.5 days started with inputs from oceanic air masses transported inland by sea breezes, which drew O3 and its precursors from a local/regional origin to the northeastern end of the basin. The orographic-meteorological setting of the valley caused vertical recirculation of the air masses inside the valley that caused the accumulation by increasing regional background O3 concentration by 25-30 ppb. Furthermore, possible Mediterranean O3 contributions and additional vertical recirculation through the entrainment zone of the convective boundary layer also contributed. Using particulate matter finer than 2.5 µm (PM2.5), ultrafine particles (UFP), and black carbon (BC) as tracers of local sources, we calculated that local contributions increased regional O3 levels by 20 ppb inside specific pollution plumes transported by the breeze into the valley, and by 10 ppb during midday when flying over an area with abundant agricultural burning during the morning. Air masses that crossed the southern boundaries of the Betic system at mid-altitude (400-1850 m a.s.l.) on July 10th and 11th may have provided additional O3. Meanwhile, a decreasing trend at high altitudes (3000-5000 m a.s.l.) was observed, signifying that the impact of stratospheric O3 intrusion decreased during the campaign.

Source contribution and origin of PM10 and arsenic in a complex industrial region (Huelva, SW Spain).

Air pollution coming from industrial activities is a matter of interest since their emissions can seriously affect to the human health of nearby populations. A more detailed study about industrial emissions is required in order to discriminate different activities contributing to pollutant sources. In this sense, gaseous pollutants (NO2, SO2 and O3) and PM10 levels has been studied in a complex industrial area in the southwest of Spain (La Rabida and the nearby city of Huelva) during the period 1996-2017. Hourly, daily, monthly and annual variations of PM10 and gaseous pollutants concentrations point to the industrial activity as the main SO2 source. Furthermore, traffic and resuspension emissions contribute to the NO2 and PM10 levels, respectively. Results from chemical composition of PM10 at both sites during the period 2015-2017 are characterized by high concentrations of the crustal components derived from natural and local resuspension. Arsenic is found to be the main geochemical anomaly at La Rabida (annual mean of 7 ng m-3), exceeding the European annual target of 6 ng m-3, which supposes a risk for the nearby population. An emission source from Cu-smelter has been identified in La Rabida and Huelva. A second source corresponding to emissions from polymetallic sulfides handling in a port area has been described for the first time in La Rabida. In addition, arsenic speciation results have identified three different As impacts scenarios as a function of the dominant wind direction, the SO2 episodes and the As extraction efficiency: impact of the Cu-smelter, impact of the bulk polymetallic sulfides and a mixed impact of both sources.

Hydrogen fluoride concentrations in ambient air of an urban area based on the emissions of a major phosphogypsum deposit (SW, Europe).

Hydrogen fluoride (HF) is one of the most toxic gaseous compounds in air, the primary anthropogenic source of which is industrial activity, specifically fertilizer and waste. HF concentrations in an urban area (Huelva, SW Spain) related to a nearby major phosphogypsum (PG) deposit were measured by passive sampling during summer and winter months from 2014 to 2017 and high-resolution sampling during 2017 and 2017-2018 using an HF analyser. An HF geochemical anomaly was found in the PG pond with average concentrations of up to 19.1 µg/m3, and concentrations of up to 1.6 µg/m3 were exhibited in the nearest urban area. The concentrations were associated with the HF emissions from the PG deposit. Emission factors were calculated by field and laboratory experiments, and the brines exhibited the highest emission factor (2.7 kg/ha day). Several impacts of HF (>0.1 µg/m3) in the city were recorded throughout the year, occurring at noon in the summer and during fog events in the winter. Consequently, the PG system should be restored to protect the population living in Huelva from the impacts of HF emission.

Long term geochemical variation of brines derived from a major phosphogypsum pond of SW Europe.

The chemical evolution of brines resulting from an inactive phosphogypsum pond derived of fertilizer industry located in Huelva (Spain, SW Europe) has been studied based on a weekly sampling from 2014 to 2017. Long-range time variation of metals and ions concentrations in brines are expected to depend on environmental parameters such as rainfall and evaporation. The results show that brines are enriched in F- (1.7-2.0 g/l), Cl- (13-24 g/l), SO42- (7.2-9.3 g/l), V (70-128 mg/l) and U (55-98 mg/l). A great variation of chemical concentrations has been found, due to dilution, recharge and evaporation processes. Most of the elements show peak concentrations in summer, coinciding with the lowest pH values (<1), high conductivity (>133 mS/cm), and high evaporation rates as expected. Nonetheless, F- shows an opposite behaviour, varying its concentrations between 0.9 g/l in summer and 3.7 g/l in the rainy season. According to the results, a future restoration plan for PG ponds should include the removal of brines and layered salts during summer in order to avoid the annual generation of brines and their impact on the environment.

Reactive Oxygen Species Production Is a Major Factor Directing the Postantibiotic Effect of Fluoroquinolones in Streptococcus pneumoniae.

We studied the molecular mechanisms involved in the postantibiotic effect of the fluoroquinolones levofloxacin and moxifloxacin in Streptococcus pneumoniae Wild-type strain R6 had postantibiotic effects of 2.05 ± 0.10 h (mean ± standard deviation [SD]) and 3.23 ± 0.45 h at 2.5× and 10× MIC of levofloxacin, respectively. Moxifloxacin exhibited lower effects of 0.87 ± 0.1 and 2.41 ± 0.29 h at 2.5× and 10× MIC, respectively. Fluoroquinolone-induced chromosome fragmentation was measured at equivalent postantibiotic effects for levofloxacin (2.5× MIC) and moxifloxacin (10× MIC). After 2 h of drug removal, reductions were approximately 7-fold for levofloxacin and 3-fold for moxifloxacin, without further decreases at later times. Variations in reactive oxygen species production were detected after 4 to 6 h of drug withdrawals, with decreases ≥400-fold for levofloxacin and ≥800-fold for moxifloxacin at 6 h. In accordance, after 4 to 6 h of drug withdrawal, the levofloxacin-induced upregulation of the fatCDEB operon, introducing iron in the bacteria, decreased up to 2- to 3-fold, and the moxifloxacin-induced upregulation of several genes involved in the production of pyruvate was reduced 3- to 7-fold. In accordance, lower postantibiotic effects (up to 1 h) were observed in strain R6 ΔspxB, lacking the main enzyme involved in oxygen peroxide production, than in R6. Although no change in the recovery of chromosome fragmentation was observed between R6 and R6 ΔspxB, 3.5 × 103-fold lower reactive oxygen species production was observed in R6 ΔspxB, without changes after drug removal. These results show that reactive oxygen species are the main factors directing the postantibiotic effect of levofloxacin and moxifloxacin in S. pneumoniae.

Chemical composition and source apportionment of PM10 at an urban background site in a high-altitude Latin American megacity (Bogota, Colombia).

Bogota registers frequent episodes of poor air quality from high PM10 concentrations. It is one of the main Latin American megacities, located at 2600 m in the tropical Andes, but there is insufficient data on PM10 source contribution. A characterization of the chemical composition and the source apportionment of PM10 at an urban background site in Bogota was carried out in this study. Daily samples were collected from June 2015 to May 2016 (a total of 311 samples). Organic carbon (OC), elemental carbon (EC), water soluble compounds (SO42-, Cl-, NO3-, NH4+), major elements (Al, Fe, Mg, Ca, Na, K, P) and trace metals (V, Cd, Pb, Sr, Ba, among others) were analyzed. The results were interpreted in terms of their variability during the rainy season (RS) and the dry season (DS). The data obtained revealed that the carbonaceous fraction (∼51%) and mineral dust (23%) were the main PM10 components, followed by others (15%), Secondary Inorganic Compounds (SIC) (11%) and sea salt (0.4%). The average concentrations of soil, SIC and OC were higher during RS than DS. However, peak values were observed during the DS due to photochemical activity and forest fires. Although trace metals represented <1% of PM10, high concentrations of toxic elements such as Pb and Sb on RS, and Cu on DS, were obtained. By using a PMF model, six factors were identified (∼96% PM10) including fugitive dust, road dust, metal processing, secondary PM, vehicles exhaust and industrial emissions. Traffic (exhaust emissions + road dust) was the major PM10 source, accounting for ∼50% of the PM10. The results provided novel data about PM10 chemical composition, its sources and its seasonal variability during the year, which can help the local government to define control strategies for the main emission sources during the most critical periods.

Assessing the Relationship between Vitamin D Status and Impairments in Cognitive and Physical Performance in Older Adults Using a Dual Task Physical Performance Test.

BACKGROUND: Vitamin D deficiency has been associated with an increased risk of falls in older adults. Several studies have demonstrated an association between vitamin D deficiency and gait and cognitive impairments, which are two risk factors for falls in the elderly. There is lack of research about the role of vitamin D in cognitive function in the context of mobility. OBJECTIVE: The purpose of this study was to evaluate the association between vitamin D status with the age-related changes in mobility through higher order cognitive function using a dual task physical performance test. DESIGN: Cross-sectional. SETTING: Community-dwelling older adult population located in Miami, Fl. PARTICIPANTS: Healthy participants over the age of 55 (n=97) who participated in the parent interventional study. MEASUREMENTS: Participants completed assessments that included serum levels of vitamin D, surveys, and dual task physical performance tests. Spearman's correlations, independent t-tests, repeated measures ANOVAs and multiple logistic regressions were used to examine the relationship between vitamin D insufficiency (25-hydroxyvitamin D <30 ng/ml) and sufficiency (≥30 ng/ml) and dual task physical performance variables. The significance level was set at α=0.05. RESULTS: There were no significant associations between vitamin D insufficiency and gait velocity during either task. Using Spearman correlations, slower single (P=0.011) and dual task counting rates (P=0.006) were significantly associated with vitamin D insufficiency. Independent t-tests showed dual and single task counting rates were significantly lower in the vitamin D insufficient group compared to the sufficient group (P=0.018 and P=0.028, respectively). The results for the ANOVAs indicated that velocities and counting rates were not significantly different by vitamin D status (Wilk's Lambda =0.999; F (1, 95) =.11, P=.740) (Wilk's Lambda =.999, F(1,95)=.13, P=.718). Vitamin D status was not significantly associated with dual task physical performance (defined as the difference in dual and single task) in gait velocity (OR=1.00, 95% CI: 0.98; 1.02, P=0.772) and counting rate (OR=1.684, 95% CI: 0.15; 19.57, P=0.677), when controlling for confounders. CONCLUSIONS: Since counting backward is a mental tracking task, which is a component of executive function, our results suggest a relationship between vitamin D insufficiency and executive dysfunction. Executive dysfunction has been previously associated with fall risks in the elderly, and it could be a possible mediator between vitamin D and falls. Our data suggest that cognition may play a significant role in vitamin D's influence on falls, while motor function may play a lesser role.

Complete analysis of ensemble inequivalence in the Blume-Emery-Griffiths model.

We study inequivalence of canonical and microcanonical ensembles in the mean-field Blume-Emery-Griffiths model. This generalizes previous results obtained for the Blume-Capel model. The phase diagram strongly depends on the value of the biquadratic exchange interaction K, the additional feature present in the Blume-Emery-Griffiths model. At small values of K, as for the Blume-Capel model, lines of first- and second-order phase transitions between a ferromagnetic and a paramagnetic phase are present, separated by a tricritical point whose location is different in the two ensembles. At higher values of K the phase diagram changes substantially, with the appearance of a triple point in the canonical ensemble, which does not find any correspondence in the microcanonical ensemble. Moreover, one of the first-order lines that starts from the triple point ends in a critical point, whose position in the phase diagram is different in the two ensembles. This line separates two paramagnetic phases characterized by a different value of the quadrupole moment. These features were not previously studied for other models and substantially enrich the landscape of ensemble inequivalence, identifying new aspects that had been discussed in a classification of phase transitions based on singularity theory. Finally, we discuss ergodicity breaking, which is highlighted by the presence of gaps in the accessible values of magnetization at low energies: it also displays new interesting patterns that are not present in the Blume-Capel model.

Emissions from the combustion of eucalypt and pine chips in a fluidized bed reactor.

Interest in renewable energy sources has increased in recent years due to environmental concerns about global warming and air pollution, reduced costs and improved efficiency of technologies. Under the European Union (EU) energy directive, biomass is a suitable renewable source. The aim of this study was to experimentally quantify and characterize the emission of particulate matter (PM2.5) resulting from the combustion of two biomass fuels (chipped residual biomass from pine and eucalypt), in a pilot-scale bubbling fluidized bed (BFB) combustor under distinct operating conditions. The variables evaluated were the stoichiometry and, in the case of eucalypt, the leaching of the fuel. The CO and PM2.5 emission factors were lower when the stoichiometry used in the experiments was higher (0.33±0.1 g CO/kg and 16.8±1.0 mg PM2.5/kg, dry gases). The treatment of the fuel by leaching before its combustion has shown to promote higher PM2.5 emissions (55.2±2.5 mg/kg, as burned). Organic and elemental carbon represented 3.1 to 30 wt.% of the particle mass, while carbonate (CO3(2-)) accounted for between 2.3 and 8.5 wt.%. The particulate mass was mainly composed of inorganic matter (71% to 86% of the PM2.5 mass). Compared to residential stoves, BFB combustion generated very high mass fractions of inorganic elements. Chloride was the water soluble ion in higher concentration in the PM2.5 emitted by the combustion of eucalypt, while calcium was the dominant water soluble ion in the case of pine.

Effect of BMI and fat mass on HIV disease progression in HIV-infected, antiretroviral treatment-naïve adults in Botswana.

An obesity paradox has been proposed in many conditions including HIV. Studies conducted to investigate obesity and its effect on HIV disease progression have been inconclusive and are lacking for African settings. This study investigated the relationship between overweight/obesity (BMI≥25 kg/m2) and HIV disease progression in HIV+ asymptomatic adults not on antiretroviral treatment (ART) in Botswana over 18 months. A cohort study in asymptomatic, ART-naïve, HIV+ adults included 217 participants, 139 with BMI of 18·0-24·9 kg/m2 and seventy-eight participants with BMI≥25 kg/m2. The primary outcome was time to event (≥25 % decrease in cluster of differentiation 4 (CD4) cell count) during 18 months of follow-up; secondary outcomes were time to event of CD4 cell count<250 cells/µl and AIDS-defining conditions. Proportional survival hazard models were used to compare hazard ratios (HR) on time to events of HIV disease progression over 18 months. Higher baseline BMI was associated with significantly lower risk of an AIDS-defining condition during the follow-up (HR 0·218; 95 % CI 0·068, 0·701; P=0·011). Higher fat mass at baseline was also significantly associated with decreased risk of AIDS-defining conditions during the follow-up (HR 0·855; 95 % CI 0·741, 0·987; P=0·033) and the combined outcome of having CD4 cell count≤250/µl and AIDS-defining conditions, whichever occurred earlier (HR 0·918; 95 % CI 0·847, 0·994; P=0·036). All models were adjusted for covariates. Higher BMI and fat mass among the HIV-infected, ART-naïve participants were associated with slower disease progression. Mechanistic research is needed to evaluate the association between BMI, fat mass and HIV disease progression.

Trends and sources vs air mass origins in a major city in South-western Europe: Implications for air quality management.

This study presents a 17-years air quality database comprised of different parameters corresponding to the largest city in the south of Spain (Seville) where atmospheric pollution is frequently attributed to traffic emissions and is directly affected by Saharan dust outbreaks. We identify the PM10 contributions from both natural and anthropogenic sources in this area associated to different air mass origins. Hourly, daily and seasonal variation of PM10 and gaseous pollutant concentrations (CO, NO2 and SO2), all of them showing negative trends during the study period, point to the traffic as one of the main sources of air pollution in Seville. Mineral dust, secondary inorganic compounds (SIC) and trace elements showed higher concentrations under North African (NAF) air mass origins than under Atlantic. We observe a decreasing trend in all chemical components of PM10 under both types of air masses, NAF and Atlantic. Principal component analysis using more frequent air masses in the area allows the identification of five PM10 sources: crustal, regional, marine, traffic and industrial. Natural sources play a more relevant role during NAF events (20.6 µg · m(-3)) than in Atlantic episodes (13.8 µg · m(-3)). The contribution of the anthropogenic sources under NAF doubles the one under Atlantic conditions (33.6 µg · m(-3) and 15.8 µg · m(-3), respectively). During Saharan dust outbreaks the frequent accumulation of local anthropogenic pollutants in the lower atmosphere results in poor air quality and an increased risk of mortality. The results are relevant when analysing the impact of anthropogenic emissions on the exposed population in large cities. The increase in potentially toxic elements during Saharan dust outbreaks should also be taken into account when discounting the number of exceedances attributable to non-anthropogenic or natural origins.

Reactive Oxygen Species Contribute to the Bactericidal Effects of the Fluoroquinolone Moxifloxacin in Streptococcus pneumoniae.

We studied the transcriptomic response of Streptococcus pneumoniae to the fluoroquinolone moxifloxacin at a concentration that inhibits DNA gyrase. Treatment of the wild-type strain R6, at a concentration of 10× the MIC, triggered a response involving 132 genes after 30 min of treatment. Genes from several metabolic pathways involved in the production of pyruvate were upregulated. These included 3 glycolytic enzymes, which ultimately convert fructose 6-phosphate to pyruvate, and 2 enzymes that funnel phosphate sugars into the glycolytic pathway. In addition, acetyl coenzyme A (acetyl-CoA) carboxylase was downregulated, likely leading to an increase in acetyl-CoA. When coupled with an upregulation in formate acetyltransferase, an increase in acetyl-CoA would raise the production of pyruvate. Since pyruvate is converted by pyruvate oxidase (SpxB) into hydrogen peroxide (H2O2), an increase in pyruvate would augment intracellular H2O2. Here, we confirm a 21-fold increase in the production of H2O2 and a 55-fold increase in the amount of hydroxyl radical in cultures treated during 4 h with moxifloxacin. This increase in hydroxyl radical through the Fenton reaction would damage DNA, lipids, and proteins. These reactive oxygen species contributed to the lethality of the drug, a conclusion supported by the observed protective effects of an SpxB deletion. These results support the model whereby fluoroquinolones cause redox alterations. The transcriptional response of S. pneumoniae to moxifloxacin is compared with the response to levofloxacin, an inhibitor of topoisomerase IV. Levofloxacin triggers the transcriptional activation of iron transport genes and also enhances the Fenton reaction.

Modeling and evaluation of urban pollution events of atmospheric heavy metals from a large Cu-smelter.

Metal smelting and processing are highly polluting activities that have a strong influence on the levels of heavy metals in air, soil, and crops. We employ an atmospheric transport and dispersion model to predict the pollution levels originated from the second largest Cu-smelter in Europe. The model predicts that the concentrations of copper (Cu), zinc (Zn), and arsenic (As) in an urban area close to the Cu-smelter can reach 170, 70, and 30 ng m−3, respectively. The model captures all the observed urban pollution events, but the magnitude of the elemental concentrations is predicted to be lower than that of the observed values; ~300, ~500, and ~100 ng m−3 for Cu, Zn, and As, respectively. The comparison between model and observations showed an average correlation coefficient of 0.62 ± 0.13. The simulation shows that the transport of heavy metals reaches a peak in the afternoon over the urban area. The under-prediction in the peak is explained by the simulated stronger winds compared with monitoring data. The stronger simulated winds enhance the transport and dispersion of heavy metals to the regional area, diminishing the impact of pollution events in the urban area. This model, driven by high resolution meteorology (2 km in horizontal), predicts the hourly-interval evolutions of atmospheric heavy metal pollutions in the close by urban area of industrial hotspot.

Glioblastoma stem cells: radiobiological response to ionising radiations of different qualities.

Glioblastoma multiforme (GBM) is the most common and malignant primary brain tumour, with very poor prognosis. The high recurrence rate and failure of conventional treatments are expected to be related to the presence of radio-resistant cancer stem cells (CSCs) inside the tumour mass. CSCs can both self-renew and differentiate into the heterogeneous lineages of cancer cells. Recent evidence showed a higher effectiveness of C-ions and protons in inactivating CSCs, suggesting a potential advantage of Hadrontherapy compared with conventional radiotherapy for GBM treatment. To investigate the mechanisms involved in the molecular and cellular responses of CSCs to ionising radiations, two GBM stem cell (GSC) lines, named lines 1 and 83, which were derived from patients with different clinical outcomes and having different metabolic profiles (as shown by NMR spectroscopy), were irradiated with (137)Cs photons and with protons or C-ions of 62 MeV u(-1) in the dose range of 5-40 Gy. The biological effects investigated were: cell death, cell cycle progression, and DNA damage induction and repair. Preliminary results show a different response to ionising radiation between the two GSC lines for the different end points investigated. Further experiments are in progress to consolidate the data and to get more insights on the influence of radiation quality.

Induction and Repair of DNA DSB as Revealed by H2AX Phosphorylation Foci in Human Fibroblasts Exposed to Low- and High-LET Radiation: Relationship with Early and Delayed Reproductive Cell Death.

The spatial distribution of radiation-induced DNA breaks within the cell nucleus depends on radiation quality in terms of energy deposition pattern. It is generally assumed that the higher the radiation linear energy transfer (LET), the greater the DNA damage complexity. Using a combined experimental and theoretical approach, we examined the phosphorylation-dephosphorylation kinetics of radiation-induced γ-H2AX foci, size distribution and 3D focus morphology, and the relationship between DNA damage and cellular end points (i.e., cell killing and lethal mutations) after exposure to gamma rays, protons, carbon ions and alpha particles. Our results showed that the maximum number of foci are reached 30 min postirradiation for all radiation types. However, the number of foci after 0.5 Gy of each radiation type was different with gamma rays, protons, carbon ions and alpha particles inducing 12.64 ± 0.25, 10.11 ± 0.40, 8.84 ± 0.56 and 4.80 ± 0.35 foci, respectively, which indicated a clear influence of the track structure and fluence on the numbers of foci induced after a dose of 0.5 Gy for each radiation type. The γ-H2AX foci persistence was also dependent on radiation quality, i.e., the higher the LET, the longer the foci persisted in the cell nucleus. The γ-H2AX time course was compared with cell killing and lethal mutation and the results highlighted a correlation between cellular end points and the duration of γ-H2AX foci persistence. A model was developed to evaluate the probability that multiple DSBs reside in the same gamma-ray focus and such probability was found to be negligible for doses lower than 1 Gy. Our model provides evidence that the DSBs inside complex foci, such as those induced by alpha particles, are not processed independently or with the same time constant. The combination of experimental, theoretical and simulation data supports the hypothesis of an interdependent processing of closely associated DSBs, possibly associated with a diminished correct repair capability, which affects cell killing and lethal mutation.

High-Q resonant cavities for terahertz quantum cascade lasers.

We report on the realization and characterization of two different designs for resonant THz cavities, based on wire-grid polarizers as input/output couplers, and injected by a continuous-wave quantum cascade laser (QCL) emitting at 2.55 THz. A comparison between the measured resonators parameters and the expected theoretical values is reported. With achieved quality factor Q ≈ 2.5 × 10(5), these cavities show resonant peaks as narrow as few MHz, comparable with the typical Doppler linewidth of THz molecular transitions and slightly broader than the free-running QCL emission spectrum. The effects of the optical feedback from one cavity to the QCL are examined by using the other cavity as a frequency reference.

Arsenic species in atmospheric particulate matter as tracer of the air quality of Doñana Natural Park (SW Spain).

Sampling and chemical analyses, including major compounds and trace elements, of atmospheric particulate matter (PM10 and PM2.5) have been performed during 2006-2007 in a regional background monitoring station located within the Doñana Natural Park (SW of Spain). This region is strategic for air quality and climate change studies, representing a meeting place of the European and African continents, and the Atlantic Ocean and Mediterranean Sea. The present study based on meteorological parameters demonstrated long-range transport and impact of industrial plumes on the Doñana Natural. Inorganic arsenic species (arsenate and arsenite) have been analyzed in particulate matter (PM) to characterize the impact of near Cu-smelter plumes and demonstrated the long-range transport of industrial pollutants. As(V) is the main specie of As and varies between 95% and 98% of total As in PM10 and 96-97% in PM2.5. The As(V)/As(III) ratio measured in emission plumes of a Cu-smelter are similar to the ratio found in the Doñana Natural Park. The application of Positive Matrix Factorization (PMF) to atmospheric particulate matter estimated the contributions and chemical profiles of natural and anthropogenic sources impacting the Natural Park, demonstrating the industrial origin of the As and other toxic elements in the air.

Integration of Monte Carlo simulations with PFGE experimental data yields constant RBE of 2.3 for DNA double-strand break induction by nitrogen ions between 125 and 225 keV/µm LET.

The number of small radiation-induced DNA fragments can be heavily underestimated when determined from measurements of DNA mass fractions by gel electrophoresis, leading to a consequent underestimation of the initial DNA damage induction. In this study we reanalyzed the experimental results for DNA fragmentation and DNA double-strand break (DSB) yields in human fibroblasts irradiated with γ rays and nitrogen ion beams with linear energy transfer (LET) equal to 80, 125, 175 and 225 keV/µm, originally measured by Höglund et al. (Radiat Res 155, 818-825, 2001 and Int J Radiat Biol 76, 539-547, 2000). In that study the authors converted the measured distributions of fragment masses into DNA fragment distributions using mid-range values of the measured fragment length intervals, in particular they assumed fragments with lengths in the interval of 0-48 kbp had the mid-range value of 24 kbp. However, our recent detailed simulations with the Monte Carlo code PARTRAC, while reasonably in agreement with the mass distributions, indicate significantly increased yields of very short fragments by high-LET radiation, so that the actual average fragment lengths, in the interval 0-48 kbp, 2.4 kbp for 225 keV/µm nitrogen ions were much shorter than the assumed mid-range value of 24 kbp. When the measured distributions of fragment masses are converted into fragment distributions using the average fragment lengths calculated by PARTRAC, significantly higher yields of DSB related to short fragments were obtained and resulted in a constant relative biological effectiveness (RBE) for DSB induction yield of 2.3 for nitrogen ions at 125-225 keV/µm LET. The previously reported downward trend of the RBE values over this LET range for DSB induction appears to be an artifact of an inadequate average fragment length in the smallest interval.