Geographic source of bats killed at wind-energy facilities in the eastern United States.

Bats subject to high rates of fatalities at wind-energy facilities are of high conservation concern due to the long-term, cumulative effects they have, but the impact on broader bat populations can be difficult to assess. One reason is the poor understanding of the geographic source of individual fatalities and whether they constitute migrants or more local individuals. Here, we used stable hydrogen isotopes, trace elements and species distribution models to determine the most likely summer geographic origins of three different bat species (Lasiurus borealis, L. cinereus, and Lasionycteris noctivagans) killed at wind-energy facilities in Ohio and Maryland in the eastern United States. In Ohio, 41.6%, 21.3%, 2.2% of all individuals of L. borealis, L. cinereus, and L. noctivagans, respectively, had evidence of movement. In contrast, in Maryland 77.3%, 37.1%, and 27.3% of these same species were classified as migrants. Our results suggest bats killed at a given wind facility are likely derived from migratory as well as resident populations. Finally, there is variation in the proportion of migrants killed between seasons for some species and evidence of philopatry to summer roosts. Overall, these results indicate that the impact of wind-energy facilities on bat populations occurs across a large geographic extent, with the proportion of migrants impacted likely to vary across species and sites. Similar studies should be conducted across a broader geographic scale to understand the impacts on bat populations from wind-energy facilities.

pH sensing through a single optical fibre using SERS and CMOS SPAD line arrays.

Full exploitation of fibre Raman probes has been limited by the obstruction of weak Raman signals by background fluorescence of the sample and the intrinsic Raman signal of the delivery fibre. Here we utilised functionalised gold nanoshells (NS) to take advantage of the surface-enhanced Raman spectroscopy (SERS) effect to enhance the pH responsive spectrum of 4-mercaptobenzoic acid (MBA). However, the fibre background is still dominant. Using the photon arrival time-resolving capability of a CMOS single-photon avalanche diode (SPAD) based line sensor, we recover the SERS spectrum without a fibre background in a 10 s measurement. In this manner, pH sensing through a multimode fibre at a low excitation power that is safe for future in vivo applications, with short acquisition times (10 or 60 s), is demonstrated. A measurement precision of ± 0.07 pH units is thus achieved.

Endoscopic sensing of alveolar pH.

Previously unobtainable measurements of alveolar pH were obtained using an endoscope-deployable optrode. The pH sensing was achieved using functionalized gold nanoshell sensors and surface enhanced Raman spectroscopy (SERS). The optrode consisted of an asymmetric dual-core optical fiber designed for spatially separating the optical pump delivery and signal collection, in order to circumvent the unwanted Raman signal generated within the fiber. Using this approach, we demonstrate a ~100-fold increase in SERS signal-to-fiber background ratio, and demonstrate multiple site pH sensing with a measurement accuracy of ± 0.07 pH units in the respiratory acini of an ex vivo ovine lung model. We also demonstrate that alveolar pH changes in response to ventilation.

Chemical analysis of multicellular tumour spheroids.

Conventional two dimensional (2D) monolayer cell culture has been considered the 'gold standard' technique for in vitro cellular experiments. However, the need for a model that better mimics the three dimensional (3D) architecture of tissue in vivo has led to the development of Multicellular Tumour Spheroids (MTS) as a 3D tissue culture model. To some extent MTS mimic the environment of in vivo tumours where, for example, oxygen and nutrient gradients develop, protein expression changes and cells form a spherical structure with regions of proliferation, senescence and necrosis. This review focuses on the development of techniques for chemical analysis of MTS as a tool for understanding in vivo tumours and a platform for more effective drug and therapy discovery. While traditional monolayer techniques can be translated to 3D models, these often fail to provide the desired spatial resolution and z-penetration for live cell imaging. More recently developed techniques for overcoming these problems will be discussed with particular reference to advances in instrument technology for achieving the increased spatial resolution and imaging depth required.

Simultaneous intracellular redox potential and pH measurements in live cells using SERS nanosensors.

Intracellular redox potential is a highly regulated cellular characteristic and is critically involved in maintaining cellular health and function. The dysregulation of redox potential can result in the initiation and progression of numerous diseases. Redox potential is determined by the balance of oxidants and reductants in the cell and also by pH. For this reason a technique for quantitative measurement of intracellular redox potential and pH is highly desirable. In this paper we demonstrate how surface enhanced Raman scattering (SERS) nanosensors can be used for multiplexed measurement of both pH and redox potential in live single cells.

Non-equilibrium cobalt(iii) "click" capsules.

Cobalt(iii) tetrahedral capsules have been prepared using an assembly-followed-by-oxidation protocol from a cobalt(ii) precursor and a readily derivatizable pyridyl-triazole ligand system. Experiments designed to probe the constitutional dynamics show that these architectures are in a non-equilibrium state. A preliminary investigation into the host-guest chemistry of a water-soluble derivative shows it can bind and differentiate a range of different neutral organic molecules. The stability of this ensemble also permits the study of guest-binding at high salt concentrations.

Development of a PCR-free electrochemical point of care test for clinical detection of methicillin resistant Staphylococcus aureus (MRSA).

An MRSA assay requiring neither labeling nor amplification of target DNA has been developed. Sequence specific binding of fragments of bacterial genomic DNA is detected at femtomolar concentrations using electrochemical impedance spectroscopy (EIS). This has been achieved using systematic optimisation of probe chemistry (PNA self-assembled monolayer film on gold electrode), electrode film structure (the size and nature of the chemical spacer) and DNA fragmentation, as these are found to play an important role in assay performance. These sensitivity improvements allow the elimination of the PCR step and DNA labeling and facilitate the development of a simple and rapid point of care test for MRSA. Assay performance is then evaluated and specific direct detection of the MRSA diagnostic mecA gene from genomic DNA, extracted directly from bacteria without further treatment is demonstrated for bacteria spiked into saline (10(6) cells per mL) on gold macrodisc electrodes and into human wound fluid (10(4) cells per mL) on screen printed gold electrodes. The latter detection level is particularly relevant to clinical requirements and point of care testing where the general threshold for considering a wound to be infected is 10(5) cells per mL. By eliminating the PCR step typically employed in nucleic acid assays, using screen printed electrodes and achieving sequence specific discrimination under ambient conditions, the test is extremely simple to design and engineer. In combination with a time to result of a few minutes this means the assay is well placed for use in point of care testing.

Single-ion nuclear clock for metrology at the 19th decimal place.

The 7.6(5) eV nuclear magnetic-dipole transition in a single 229Th3+ ion may provide the foundation for an optical clock of superb accuracy. A virtual clock transition composed of stretched states within the 5F(5/2) electronic ground level of both nuclear ground and isomeric manifolds is proposed. It is shown to offer unprecedented systematic shift suppression, allowing for clock performance with a total fractional inaccuracy approaching 1×10(-19).

Wigner crystals of 229Th for optical excitation of the nuclear isomer.

We have produced laser-cooled Wigner crystals of 229Th3+ in a linear Paul trap. The magnetic dipole (A) and electric quadrupole (B) hyperfine constants for four low-lying electronic levels and the relative isotope shifts with respect to 232Th3+ for three low-lying optical transitions are measured. Using the hyperfine B constants in conjunction with prior atomic structure calculations, a new value of the spectroscopic nuclear electric quadrupole moment Q=3.11(16) eb is deduced. These results are a step towards optical excitation of the low-lying isomer level in the 229Th nucleus.

Multiply charged thorium crystals for nuclear laser spectroscopy.

We have produced laser-cooled crystals of 232Th3+ in a linear rf Paul trap. This is the first time that a multiply charged ion has been laser cooled. Our work opens an avenue for excitation of the nuclear transition in a trapped, cold 229Th3+ ion. Laser excitation of nuclear states would establish a new bridge between atomic and nuclear physics, with the promise of new levels of metrological precision.

Molecular recognition with DNA nanoswitches: effects of single base mutations on structure.

This paper investigates the properties of a simple DNA-based nanodevice capable of detecting single base mutations in unlabeled nucleic acid target sequences. Detection is achieved by a two-stage process combining first complementary-base hybridization of a target and then a conformational change as molecular recognition criteria. A probe molecule is constructed from a single DNA strand designed to adopt a partial cruciform structure with a pair of exposed (unhybridized) strands. Upon target binding, a switchable cruciform construct (similar to a Holliday junction) is formed which can adopt open and closed junction conformations. Switching between these forms occurs by junction folding in the presence of divalent ions. It has been shown from the steady-state fluorescence of judiciously labeled constructs that there are differences between the fluorescence resonance energy transfer (FRET) efficiencies of closed forms, dependent on the target sequence near the branch point, where the arms of the cruciform cross. This difference in FRET efficiency is attributed to structural variations between these folded junctions with their different branch point sequences arising from the single base mutations. This provides a robust means for the discrimination of single nucleotide mismatches in a specific region of the target. In this paper, these structural differences are analyzed by fitting observed time-resolved donor fluorescence decay data to a Gaussian distribution of donor-acceptor separations. This shows the closest mean separation (approximately 40 A) for the perfectly matched case, whereas larger separations (up to 50 A) are found for the single point mutations. These differences therefore indicate a structural basis for the observed FRET differences in the closed configuration which underpins the operation of these devices as biosensors capable of resolving single base mutations.

Dual-species matter qubit entangled with light.

We propose and demonstrate an atomic qubit based on a cold 85Rb-87Rb isotopic mixture, entangled with a frequency-encoded optical qubit. The interface of an atomic qubit with a single spatial light mode, and the ability to independently address the two atomic qubit states, should provide the basic interferometrically robust element of a quantum network.

Time-resolved FRET and FLIM of four-way DNA junctions.

Conformational transitions in a 4-way DNA junction when titrated with ionic solutions are studied using time-resolved fluorescence resonance energy transfer. Parameters characterising the transition in terms of critical ion concentration (c1/2) and the Hill coefficient for ion binding are obtained by fitting a simple two-state model using steady-state spectra. Data obtained from a fluorescence lifetime plate reader and analysed by fitting a single exponential to donor fluorescence lifetime decays are shown to be in good agreement with the parameters obtained from steady-state measurements. Fluorescence lifetimes, however, offer advantages, particularly in being independent of fluorophore concentration, output intensity, inhomogeneity in the excitation source and output wavelength. We demonstrate preliminary FRET-FLIM images of DNA junction solutions obtained using a picosecond gated CCD which are in agreement with results from a fluorescence lifetime plate reader. The results suggest that time-resolved FRET-FLIM is sensitive to subtle structural changes and may be useful in assays based on 4-way DNA junctions.

The stability and characteristics of a DNA Holliday junction switch.

A Holliday junction (HJ) consists of four DNA double helices, with a branch point discontinuity at the intersection of the component strands. At low ionic strength, the HJ adopts an open conformation, with four widely spaced arms, primarily due to strong electrostatic repulsion between the phosphate groups on the backbones. At high ionic strength, screening of this repulsion induces a switch to a more compact (closed) junction conformation. Fluorescent labelling with dyes placed on the HJ arms allows this conformational switch to be detected optically using fluorescence resonance energy transfer (FRET), producing a sensitive fluorescent output of the switch state. This paper presents a systematic and quantitative survey of the switch characteristics of such a labelled HJ. A short HJ (arm length 8 bp) is shown to be prone to dissociation at low switching ion concentration, whereas an HJ of arm length 12 bp is shown to be stable over all switching ion concentrations studied. The switching characteristics of this HJ have been systematically and quantitatively studied for a variety of switching ions, by measuring the required ion concentration, the sharpness of the switching transition and the fluorescent output intensity of the open and closed states. This stable HJ is shown to have favourable switch characteristics for a number of inorganic switching ions, making it a promising candidate for use in nanoscale biomolecular switch devices.

Cutting into Solids with Micropatterned Gels.

Hydrogel stamps can microstructure solid surfaces, i.e., modify the surface topology of metals, glasses, and crystals. It is demonstrated that stamps soaked in an appropriate etchant can remove material with micrometer-scale precision. The Figure shows an array of concentric circles etched in glass using the immersion wet stamping process described (scale bar: 500 µm).

Multicolour micropatterning of thin films of dry gels.

Micropatterning of surfaces with several chemicals at different spatial locations usually requires multiple stamping and registration steps. Here, we describe an experimental method based on reaction-diffusion phenomena that allows for simultaneous micropatterning of a substrate with several coloured chemicals. In this method, called wet stamping (WETS), aqueous solutions of two or more inorganic salts are delivered onto a film of dry, ionically doped gelatin from an agarose stamp patterned in bas relief. Once in conformal contact, these salts diffuse into the gelatin, where they react to give deeply coloured precipitates. Separation of colours in the plane of the surface is the consequence of the differences in the diffusion coefficients, the solubility products, and the amounts of different salts delivered from the stamp, and is faithfully reproduced by a theoretical model based on a system of reaction-diffusion partial differential equations. The multicolour micropatterns are useful as non-binary optical elements, and could potentially form the basis of new applications in microseparations and in controlled delivery.

Molecular signatures for diagnosis of infection: application of microarray technology.

Technological developments such as microarray-based DNA, RNA and protein detection have opened new fields in genomics and proteomics. This review aims to highlight the potential value and limitation of this methodology to design and extract signature-based diagnostic markers for infectious disease.

Absorption of water by thin, ionic films of gelatin.

This paper discusses absorption of water by thin, dry films of gelatin. Experiments using a wet-stamping technique were performed to characterize water uptake in terms of (i) equilibrium profiles of the water density inside the gel and (ii) the kinetics of water absorption. It was found that, in contrast to pure gelatin films, which absorb water approximately uniformly, films of gelatin doped with ionic additives have exponentially decaying equilibrium water profiles. The process of water absorption by both doped and undoped gels was described by a theoretical model based on the minimization of grand potential functional. The results of this model are in agreement with the experiment.

The transcriptional corepressor NAB2 blocks Egr-1-mediated growth factor activation and angiogenesis.

Effective tissue repair results from a rapid, temporally orchestrated series of events. At the site of local tissue injury, the production of many growth factors and cytokines is, in part, stimulated by the early growth response transcription factors such as Egr-1. Egr-1 protein binds to a family of corepressor proteins called NAB which function to block or limit Egr-1 trans-activation of cognate target genes. NAB2 blocks Egr-1 activation of the tissue factor (TF) promoter, Egr-1 stimulated production of PDGF-AB, HGF, TGFbeta(1), and VEGF and the endogenous expression of PDGF-AB and TGFbeta(1). Expression of a wild-type NAB2 but not a dominant negative NAB2 mutant abrogates Egr-1 driven TF promoter activity and tubule formation in an in vitro model of angiogenesis. These findings may have importance in any tissue that is subject to scarring after acute or chronic injury.

Fecal analysis of ovarian cycles in female black-handed spider monkeys (Ateles geoffroyi).

An enzyme immunoassay (EIA) was applied to characterize the reproductive endocrinology of adult female black-handed spider monkeys (Ateles geoffroyi). Analysis of paired urine and fecal samples, collected from two females housed at San Diego Zoo, confirmed that the EIAs employed provided quantitative measurements of ovarian sex steroid hormones. Fecal metabolite levels were significantly correlated with those in urine, confirming that feces are a valid source of steroid metabolites in this species. The excretion of these metabolites in feces lagged urinary excretion by 1-2 days. The ovarian cycle profiles of the two captive females and five free-ranging females are comparable, with an average length of approximately 20-23 days. Cyclical bleeding, as previously reported, was observed in one of the two captive females. Pregnancy was detected in four free-ranging females, and early fetal loss for one female was indicated by hormonal data.