Remarkable Toughening of Plastic with Monodispersed Nano-CaCO3: From Theoretical Predictions to Experimental Validation.

The structure-property relationship of poly(vinyl chloride) (PVC)/CaCO3 nanocomposites is investigated by all-atom molecular dynamics (MD) simulations. MD simulation results indicate that the dispersity of nanofillers, interfacial bonding, and chain mobility are imperative factors to improve the mechanical performance of nanocomposites, especially toughness. The tensile behavior and dissipated work of the PVC/CaCO3 model demonstrate that 12 wt % CaCO3 modified with oleate anion and dodecylbenzenesulfonate can impart high toughness to PVC due to its good dispersion, favorable interface interaction, and weak migration of PVC chains. Under the guidance of MD simulation, we experimentally prepared a transparent PVC/CaCO3 nanocomposite with good mechanical properties by in situ polymerization of monodispersed CaCO3 in vinyl chloride monomers. Interestingly, experimental tests indicate that the optimum toughness of a nanocomposite (a 368% increase in the elongation at break and 204% improvement of the impact strength) can be indeed realized by adding 12 wt % CaCO3 modified with oleic acid and dodecylbenzenesulfonic acid, which is remarkably consistent with the MD simulation prediction. In short, this work provides a proof-of-concept of using MD simulation to guide the experimental synthesis of PVC/CaCO3 nanocomposites, which can be considered as an example to develop other functional nanocomposites.

Designing 3d Transition Metal Cation-Doped MRuOx As Durable Acidic Oxygen Evolution Electrocatalysts for PEM Water Electrolyzers.

The continuous dissolution and oxidation of active sites in Ru-based electrocatalysts have greatly hindered their practical application in proton exchange membrane water electrolyzers (PEMWE). In this work, we first used density functional theory (DFT) to calculate the dissolution energy of Ru in the 3d transition metal-doped MRuOx (M = Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, and Zn) to evaluate their stability for acidic oxygen evolution reaction (OER) and screen out ZnRuOx as the best candidate. To confirm the theoretical predictions, we experimentally synthesized these MRuOx materials and found that ZnRuOx indeed displays robust acidic OER stability with a negligible decay of η10 after 15 000 CV cycles. Of importance, using ZnRuOx as the anode, the PEMWE can run stably for 120 h at 200 mA cm-2. We also further uncover the stability mechanism of ZnRuOx, i.e., Zn atoms doped in the outside of ZnRuOx nanocrystal would form a "Zn-rich" shell, which effectively shortened average Ru-O bond lengths in ZnRuOx to strengthen the Ru-O interaction and therefore boosted intrinsic stability of ZnRuOx in acidic OER. In short, this work not only provides a new study paradigm of using DFT calculations to guide the experimental synthesis but also offers a proof-of-concept with 3d metal dopants as RuO2 stabilizer as a universal principle to develop high-durability Ru-based catalysts for PEMWE.

A general descriptor for single-atom catalysts decorated with axial ligand.

Decoration of an axial coordination ligand (ACL) on the active metal site is a highly effective and versatile strategy to tune activity of single-atom catalysts (SACs). However, the regulation mechanism of ACLs on SACs is still incompletely known. Herein, we investigate diversified combinations of ACL-SACs, including all 3d-5d transition metals and ten prototype ACLs. We identify that ACLs can weaken the adsorption capability of the metal atom (M) by raising the bonding energy levels of the M-O bond while enhancing dispersity of the d orbital of M. Through examination of various local configurations and intrinsic parameters of ACL-SACs, a general structure descriptor σ is constructed to quantify the structure-activity relationship of ACL-SACs which solely based on a few key intrinsic features. Importantly, we also identified the axial ligand descriptor σACL, as a part of σ, which can serve as a potential descriptor to determine the rate-limiting steps (RLS) of ACL-SACs in experiment. And we predicted several ACL-SACs, namely, CrN4-, FeN4-, CoN4-, RuN4-, RhN4-, OsN4-, IrN4- and PtN4-ACLs, that entail markedly higher activities than the benchmark catalysts of Pt and IrO2, thereby supporting that the general descriptor σ can provide a simple and cost-effective method to assess efficient electrocatalysts.

Molecular Engineering for Modulating Photocatalytic Hydrogen Evolution of Fully Conjugated 3D Covalent Organic Frameworks.

Covalent organic frameworks (COFs) have recently shown great potential for photocatalytic hydrogen production. Currently almost all reports are focused on two-dimensional (2D) COFs, while the 3D counterparts are rarely explored due to their non-conjugated frameworks derived from the sp3 carbon based tetrahedral building blocks. Here, we rationally designed and synthesized a series of fully conjugated 3D COFs by using the saddle-shaped cyclooctatetrathiophene derivative as the building block. Through molecular engineering strategies, we thoroughly discussed the influences of key factors including the donor-acceptor structure, hydrophilicity, specific surface areas, as well as the conjugated/non-conjugated structures on their photocatalytic hydrogen evolution properties. The as-synthesized fully conjugated 3D COFs could generate the hydrogen up to 40.36 mmol h-1 g-1. This is the first report on intrinsic metal-free 3D COFs in photocatalytic hydrogen evolution application. Our work provides insight on the structure design of 3D COFs for highly-efficient photocatalysis, and also reveals that the semiconducting fully conjugated 3D COFs could be a useful platform in clear energy-related fields.

Sustainable Anionic Redox by Inhibiting Li Cross-Layer Migration in Na-Based Layered Oxide Cathodes.

The irrational utilization of an anionic electron often accompanies structural degradation with an irreversible cation migration process upon cycling in sodium-layered oxide cathodes. Moreover, the insufficient understanding of the anionic redox involved cation migration makes the design strategies of high energy density electrodes even less effective. Herein, a P3-Na0.67Li0.2Fe0.2Mn0.6O2 (P3-NLFM) cathode is proposed with the in-plane disordered Li distribution after an in-depth remolding of the Li ribbon-ordered P3-Na0.6Li0.2Mn0.8O2 (P3-NLM) layered oxide. The disordered Li sublattice in the transition metal slab of P3-NLFM leads to the dispersed |O2p orbitals, the lowered charge transfer gap, and the suppressed phase transition at high voltages. Then the enhanced Mn-O interaction and electronic stability are disclosed by the crystal orbital Hamilton population (COHP) analysis at high voltage in P3-NLFM. Furthermore, ab initio molecular dynamics (AIMD) simulation suggests the order/disorder of the transition metal layer is highly correlated with the stability of the Li sublattice. The cross-layer migration and loss of Li in P3-NLM are suppressed in P3-NLFM to enable the high reversibility upon cycling. As a result, the P3-NLFM delivers a high capacity of 163 mAh g-1 without oxygen release and an enhanced capacity retention of 81.9% (vs 42.9% in P3-NLM) after 200 cycles, which constitutes a promising approach for sustainable oxygen redox in rechargeable batteries.

A Novel Homoconjugated Propellane Triimide: Synthesis, Structural Analyses, and Gas Separation.

Rigid three-dimensional (3D) polycyclic propellanes have garnered interest due to their unique conformational spaces, which display great potential use in selectivity, separation and as models to study through-space electronic interactions. Herein we report the synthesis of a novel rigid propellane, trinaphtho[3.3.3]propellane triimide, which comprises three imide groups embedded on a trinaphtho[3.3.3]propellane. This propellane triimide exhibits large bathochromic shift, amplified molar absorptivity, enhanced fluorescence, and lower reduction potential when compared to the subunits. Computational and experimental studies reveal that the effective through-space π-orbitals interacting (homoconjugation) occurs between the subunits. Single-crystal XRD analysis reveals that the propellane triimide has a highly quasi-D3h symmetric skeleton and readily crystallizes into different superstructures by changing alkyl chains at the imide positions. In particular, the porous 3D superstructure with S-shaped channels is promising for taking up ethane (C2H6) with very good selectivity over ethylene (C2H4), which can purify C2H4 from C2H6/C2H4 in a single separation step. This work showcases a new class of rare 3D polycyclic propellane with intriguing electronic and supramolecular properties.

Single Atom Ru Doped Ni2P/Fe3P Heterostructure for Boosting Hydrogen Evolution for Water Splitting.

Modulating the chemical composition and structure has been considered as one of the most promising strategies for developing high-efficient water splitting catalysts. Here, a single-atom Ru doped Ni2P/Fe3P catalyst is synthesized by introducing the dispersed Ru atoms to adjust Ni2P/Fe3P heterostructure. Single atom Ru provides effective hydrogen evolution reaction (HER) active sites for boosting catalytic activities. The catalyst with only 0.2 wt.% content of Ru exhibits an overpotential of 19.3 mV at 10 mA cm-2, which is obviously lower than 146.1 mV of Ni2P/Fe3P. Notably, an alkaline overall water electrolyzer based on Ru-Ni2P/Fe3P catalysts achieves a cell voltage of 1.47 V and operates over 600 h at 10 mA cm-2, which is superior to that of benchmark RuO2//Pt/C (1.61 V). The theoretical calculations further confirm that Ru single atom doping can effectively optimize the hydrogen/water adsorption free energy of the active site and therefore improve the HER activity of heterostructure. This work provides a valuable reference to design high-activity and durability catalyst for water splitting through the double modulation of interface-effect and atomic doping.

Robust Ru-VO2 Bifunctional Catalysts for All-pH Overall Water Splitting.

Designing robust bifunctional catalysts for oxygen evolution reaction (OER) and hydrogen evolution reaction in all-pH conditions for overall water splitting (OWS) is an effective way to achieve sustainable development. Herein, a composite Ru-VO2 containing Ru-doped VO2 and Ru nanoparticles (NPs) is synthesized, and it shows a high OWS performance in full-pH range due to their synergist effect. In particular, the OER mass activities of Ru-VO2 at 1.53 V (vs RHE) in acidic, alkaline, and PBS solutions are ≈65, 36, and 235 times of commercial RuO2 in the same conditions. The "Ru-VO2 || Ru-VO2 " two-electrode electrolyzer only needs a voltage of 1.515 V (at 10 mA cm-2 ) in acidic water splitting, which can operate stably for 125 h at 10 mA cm-2 without significant voltage decay. In situ Raman spectra and in situ differential electrochemical mass spectrometry prove that the OER of Ru-VO2 in acid follows the adsorption evolution mechanism. Density functional theory calculations further reveal the synergistic effect between Ru NP and Ru-doped VO2 , which breaks the hydrogen bond network formed by *OH adsorbed on the Ru single-atom site, and thereby significantly enhances the OER activity. This work provides new insights into the design of novel bifunctional pH-universal catalysts for OWS.

Multicomponent Synthesis of Imidazole-Linked Fully Conjugated 3D Covalent Organic Framework for Efficient Electrochemical Hydrogen Peroxide Production.

The semiconducting properties and applications of three dimensional (3D) covalent organic frameworks (COFs) are greatly hampered because of their long-ranged non-conjugated skeletons and relatively unstable linkages. Here, a robust imidazole-linked fully conjugated 3D covalent organic framework (BUCT-COF-7) is synthesized through the one-pot multicomponent Debus-Radziszewski reaction of the saddle-shaped aldehyde-substituted cyclooctatetrathiophene, pyrene-4,5,9,10-tetraone, and ammonium acetate. The semiconducting BUCT-COF-7, as a metal-free catalyst, shows excellent two electron oxygen reduction reaction (ORR) activity in alkaline medium with high hydrogen peroxide (H2 O2 ) selectivity of 83.4 %. When the BUCT-COF-7 as cathode catalyst is assembled into the electrolyzer, the devices showed high electrochemical production rate of H2 O2 up to 326.9 mmol g-1 h-1 . The accumulative amount of H2 O2 could totally degrade the dye methylene blue via Fenton reaction for wastewater treatment. This is the first report about intrinsic 3D COFs for efficient electrochemical synthesis of H2 O2 , revealing the promising applications of fully conjugated 3D COFs in the environment-related field.

Novel 2D carbon material T-graphene supported 3d transition metal single atoms as efficient oxygen reduction catalysts.

Carbon-based support anchored 3d transition metal (TM) single atom catalysts (SACs) have been widely considered as promising candidates for the oxygen reduction reaction (ORR), and their intrinsic activity is closely related to the geometric and electronic structures of the supports. T-graphene was predicted to have high conductivity and stability, so it may be also a promising support for loading SACs for electrocatalysis. Here, we systematically evaluate the ORR activity of T-graphene supported TM single atoms (TMN4-Tgra and TMC4-Tgra, TM = Sc-Zn) and their graphene supported counterparts (TMN4-Gra and TMC4-Gra). The TM(dxz)-O(px), TM(dyz)-O(py) and TM(dz2)-O(pz + s) orbital hybridizations between the active central metal and the *OH intermediate determine the ORR activity. Compared to graphene, T-graphene increases the d-band center (especially the ß-spin state) of single atoms and reduces the *OH adsorption strength, which thus improves the ORR activity of the catalysts located in the left leg of the ORR activity volcano plot. Interestingly, we found that for the catalysts with different TMs anchored on the same support, the adsorption strength of oxygen intermediates increases with the increase of the d-band center of the active site, while for the catalysts with the same metal anchored on different supports, the adsorption strength of oxygen intermediates weakens with the increase of the d-band center of the active site, which can serve as a d-band center dependence law on supports and active sites for designing ORR catalysts.

Strain Engineering of the NiTe/Ni2P Heterostructure to Boost the Oxygen Evolution Reaction.

Discovering highly efficient and stable non-precious metal catalysts for the oxygen evolution reaction (OER) is crucial for energy conversion in water splitting. However, preparing high-performance OER catalysts and elucidating the structural changes in the process are still challenging. Herein, we synthesize the NiTe/Ni2P heterostructure and demonstrate the strain engineering of NiTe/Ni2P via the lattice incompatibility between the phosphide and the telluride. The strain engineering of the NiTe/Ni2P heterostructure not only significantly boosts the OER activity but also effectively stabilizes the intrinsic structure of the catalyst after the OER process by using the in situ-produced metal salt as a protection layer. After the OER stability test, no oxyhydroxide phase is observed, and in situ Raman spectroscopy reveals that a voltage-dependent phase transition appears during the OER, which is different from most previously reported Ni-based catalysts, for which the generation of irreversible NiOOH occurs after the OER. Density functional theory calculations further reveal that the tensile strain of Ni2P will inhibit the presence of irreversible phase transitions of Ni2P into NiOOH due to the weak adsorption ability of the oxygen species caused by strain engineering. In short, this work opens a new gate for using strain nanotechnology to design high-performance OER catalysts.

Tensile-Strained Holey Pd Metallene toward Efficient and Stable Electrocatalysis.

Noble metal-based metallenes are attracting intensive attention in energy catalysis, but it is still very challenging to precisely control the surface structures of metallenes for higher catalytic properties on account of their intrinsic thermodynamic instability. Herein, the synthesis of tensile-strained holey Pd metallene by oxidative etching is reported using hydrogen peroxide, which exhibits highly enhanced catalytic activity and stability in comparison with normal Pd metallene toward both oxygen reduction reaction and formic acid oxidation. The pre-prepared Pd metallene functions as a catalyst to decompose hydrogen peroxide, and the Pd atoms in amorphous regions of Pd metallene are preferentially removed by the introduced hydrogen peroxide during the etching process. The greatly enhanced ORR activity is mainly determined by the strong electrostatic repulsion between intermediate O* and the dopant O, which balances the adsorption strength of O* on Pd sites, ultimately endowing a weakened adsorption energy of O* on TH-Pd metallene. This work creates a facile and economical strategy to precisely shape metallene-based nanoarchitectures with broad applications for energy systems and sensing devices.

Simple Solution Preparation of Cs2SnI6 Films and Their Applications in Solid-State DSSCs.

Cs2SnI6 powder is, for the first time, solution-prepared via the formula CsI + SnI2 + I2 → Cs2SnI6. The product is highly pure and air/thermal stable. It is found that N,N-dimethylformamide (DMF) and methanol induce severe Cs2SnI6 deterioration with the appearance of a CsI phase in film preparation from Cs2SnI6 powder, while solvents of γ-butyrolactone (GBL) and ethylene glycol methyl ether (EGME) (Film-EGME) give better results. Then, by introducing EGME solvent, in situ preparation of Cs2SnI6 films (Film-1 to Film-4) is realized under solution reaction, which is found to be dominated by thermal dynamic process, i.e., highly pure/oriented Film-4 is obtained under the maximum reagent-concentration. Besides, for good reaction, the solubility of solvent should be balanced among all the reagents and products. Solid-state dye sensitized solar cells (ss-DSSCs) comprising a Cs2SnI6 electrolyte are investigated. The power conversion efficiencies (PCEs) of the ss-DSSCs based on solution-casted Film-EGME and the in situ-prepared Film-4 are 1.81% and 3.30%, respectively. Particularly, with the in situ prepared Cs2SnI6 films, it is found that the open circuit voltages of the ss-DSSCs are closely related to their gap states. When additive is added in Cs2SnI6 electrolyte, a PCE of 6.14% is obtained in an ss-DSSC. Our work highlights the importance of solvent in film preparation and the role of Cs2SnI6 gap states in device performance.

Atomically Dispersed Zn-Pyrrolic-N4 Cathode Catalysts for Hydrogen Fuel Cells.

To achieve practical application of fuel cell, it is vital to develop highly efficient and durable Pt-free catalysts. Herein, we prepare atomically dispersed ZnNC catalysts with Zn-Pyrrolic-N4 moieties and abundant mesoporous structure. The ZnNC-based anion-exchange membrane fuel cell (AEMFC) presents an ultrahigh peak power density of 1.63 and 0.83 W cm-2 in H2 -O2 and H2 -air (CO2 -free), and also exhibits long-term stability with more than 120 and 100 h for H2 -air (CO2 -free) and H2 -O2 , respectively. Density functional calculations further unveil that the Zn-Pyrrolic-N4 structure is the origin of high activity of as-synthesized ZnNC catalyst, while the Zn-Pyridinic-N4 moiety is inactive for oxygen reduction reaction (ORR), which successfully explain the puzzle why most Zn-metal-organic framework -derived ZnNC catalysts in previous reports did not present good ORR activity because of their Zn-Pyridinic-N4 moieties. This work offers a new route for speeding up development of AEMFCs.

Designing Thiophene-Enriched Fully Conjugated 3D Covalent Organic Framework as Metal-Free Oxygen Reduction Catalyst for Hydrogen Fuel Cells.

The application of three-dimensional (3D) covalent organic frameworks (COFs) in renewable energy fields is greatly limited due to their non-conjugated skeletons. Here, we design and successfully synthesize a thiophene-enriched fully conjugated 3D COF (BUCT-COF-11) through an all-thiophene-linked saddle-shaped building block (COThTh-CHO). The BUCT-COF-11 exhibits excellent semiconducting property with intrinsic metal-free oxygen reduction reaction (ORR) activity. Using the COF as cathode catalyst, the assembled anion-exchange membrane fuel cells (AEMFCs) exhibited a high peak power density up to 493 mW cm-2 . DFT calculations reveal that thiophene introduction in the COF not only improves the conductivity but also optimizes the electronic structure of the sample, which therefore boosts the ORR performance. This is the first report on the application of COFs as metal-free catalysts in fuel cells, demonstrating the great potential of fully conjugated 3D COFs as promising semiconductors in energy fields.

High-Rate Organic Cathode Constructed by Iron-Hexaazatrinaphthalene Tricarboxylic Acid Coordination Polymer for Li-Ion Batteries.

The sluggish ion-transport in electrodes and low utilization of active materials are critical limitations of organic cathodes, which lead to the slow reaction dynamics and low specific capacity. In this study, the hierarchical tube is constructed by iron-hexaazatrinaphthalene tricarboxylic acid coordination polymer (Fe-HATNTA), using HATNTA as the self-engaged template to coordinate with Fe2+ ions. This Fe-HATNTA tube with hierarchical porous structure ensures the sufficient contact between electrolyte and active materials, shortens the diffusion distance, and provides more favorable transport pathways for ions. When employed as the cathode for rechargeable Li-ion batteries, Fe-HATNTA delivers a high specific capacity (244 mAh g-1 at 50 mA g-1 , 91% of theoretical capacity), excellent rate capability (128 mAh g-1 at 9 A g-1 ), and a long-term cycle life (73.9% retention over 3000 cycles at 5 A g-1 ). Moreover, the Li+ ions storage and conduction mechanisms are further disclosed by the ex situ and in situ characterizations, kinetic analyses, and theoretical calculations. This work is expected to boost further enthusiasm for developing the hierarchical structured metal-organic coordination polymers with superb ionic storage and transport as high-performance organic cathodes.

Degradation Mechanism of Micro-Nanobubble Technology for Organic Pollutants in Aqueous Solutions.

Micro-nanobubbles (MNBs) technology has emerged as an effective means of sewage treatment, while the molecular mechanism for its pollutant degradation is still unknown. In this paper, the reactive molecular dynamics simulation technique is used to study the degradation mechanism of pollutants caused by shock-induced nanobubble collapse. We first demonstrate that the propagating shock wave can induce nanobubble collapse, and the collapsing nanobubble has the ability to focus mechanical energy via the converging motion of liquid in the interior of the bubble, leading to the formation of a high-speed jet with a much higher energy density. We also unveil the mechanical nature of long-chain pollutant degradation and the mechanism of free radical generation. Due to the impacting jet, the high-gradient flow has the ability to stretch the long-chain molecule and cause mechanical scission of the molecule in a homolytic manner. Finally, our simulation results reveal that adding ozone molecules to the collapsing bubble would introduce an additional dehydrogenation mechanism.

Steered polymorphic nanodomains in TiO2 to boost visible-light photocatalytic oxidation.

A breakthrough in enhancing visible-light photocatalysis of wide-bandgap semiconductors such as prototypical titania (TiO2) via cocatalyst decoration is still challenged by insufficient heterojunctions and inevitable interfacial transport issues. Herein, we report a novel TiO2-based composite material composed of in situ generated polymorphic nanodomains including carbon nitride (C3N4) and (001)/(101)-faceted anatase nanocrystals. The introduction of ultrafine C3N4 results in the generation of many oxygen vacancies in the TiO2 lattice, and simultaneously induces the exposure and growth of anatase TiO2(001) facets with high surface energy. The photocatalytic performance of C3N4-induced TiO2 for degradation of 2,4-dichlorophenol under visible-light irradiation was tested, its apparent rate being up to 1.49 × 10-2 min-1, almost 3.8 times as high as that for the pure TiO2 nanofibers. More significantly, even under low operation temperature and after a long-term photocatalytic process, the composite still exhibits exceptional degradation efficiency and stability. The normalized degradation efficiency and effective lifespan of the composite photocatalyst are far superior to other reported modified photocatalysts.

Porous organic polymers as a platform for sensing applications.

Sensing analysis is significantly important for human health and environmental safety, and has gained increasing concern. As a promising material, porous organic polymers (POPs) have drawn widespread attention due to the availability of plentiful building blocks and their tunable structures, porosity and functions. Moreover, the permanent porous nature could provide a micro-environment to interact with guest molecules, rendering POPs attractive for application in the sensing field. In this review, we give a comprehensive overview of POPs as a platform for sensing applications. POP-based sensors are mainly divided into five categories, including fluorescence turn-on sensors, fluorescence turn-off sensors, ratiometric fluorescent sensors, colorimetric sensors and chemiresistive sensors, and their various sensing applications in detecting explosives, metal ions, anions, small molecules, biological molecules, pH changes, enantiomers, latent fingerprints and thermosensation are summarized. The different structure-based POPs and their corresponding synthetic strategies as well as the related sensing mechanisms mainly including energy transfer, donor-acceptor electron transfer, absorption competition quenching and inner filter effect are also involved in the discussion. Finally, the future outlook and perspective are addressed briefly.

A Three-Dimensional sp2 Carbon-Conjugated Covalent Organic Framework.

A first example of an sp2 carbon-conjugated three-dimensional (3D) covalent organic framework (COF) (BUCT-COF-4) is synthesized via the Knoevenagel condensation of the saddle-shaped aldehyde-substituted cyclooctatetrathiophene and 1,4-phenylenediacetonitrile. Ascribed to the extended π-conjugation and long-range ordered structures, BUCT-COF-4 displays high Hall electron mobility of 1.97 cm2 V-1 s-1 at room temperature. After it is doped with iodine, the material not only exhibits an enhanced electron mobility up to 2.62 cm2 V-1 s-1 in ambient air but also presents an unexpected metal-free ferromagnetic phase transition arising from the formation of aligned spins unidirectional across the whole sp2 carbon-conjugated 3D framework. This is the first report of a ferromagnetic phenomenon in 3D COF materials, which would broaden promising applications and open a new frontier in COF materials.