Antifungal efficiency and mechanisms of ethyl ferulate against postharvest pathogens.

Postharvest loss caused by a range of pathogens necessitates exploring novel antifungal compounds that are safe and efficient in managing the pathogens. This study evaluated the antifungal activity of ethyl ferulate (EF) and explored its mechanisms of action against Alternaria alternata, Aspergillus niger, Botrytis cinerea, Penicillium expansum, Penicillium digitatum, Geotrichum candidum and evaluated its potential to inhibit postharvest decay. The results demonstrated that EF exerts potent antifungal activity against a wide board of postharvest pathogens. Results also revealed that its antifungal mechanism is multifaceted: EF may be involved in binding to and disturbing the integrity of the fungal plasma membrane, causing leakage of intracellular content and losing normal morphology and ultrastructure. EF also induced oxidative stress in the pathogen, causing membrane lipid peroxidation and malondialdehyde accumulation. EF inhibited the critical gene expression of the pathogen, affecting its metabolic regulation, antioxidant metabolism, and cell wall degrading enzymes. EF exhibited antifungal inhibitory activity when applied directly into peel wounds or after incorporation with chitosan coating. Due to its wide board and efficient antifungal activity, EF has the potential to provide a promising alternative to manage postharvest decay.

tert-Butyl Nitrite-Induced Radical Nitrile Oxidation Cycloaddition: Synthesis of Isoxazole/Isoxazoline-Fused Benzo 6/7/8-membered Oxacyclic Ketones.

A practical metal-free and additive-free approach for the synthesis of 6/7/8-membered oxacyclic ketone-fused isoxazoles/isoxazolines tetracyclic or tricyclic structures is reported through Csp3-H bond radical nitrile oxidation and the intramolecular cycloaddition of alkenyl/alkynyl-substituted aryl methyl ketones. This convenient approach enables the simultaneous formation of isoxazole/isoxazoline and 6/7/8-membered oxacyclic ketones to form polycyclic architectures by using tert-butyl nitrite (TBN) as a non-metallic radical initiator and N-O fragment donor.

Techno-functional properties of active film based on guar gum-propolis and its application for "Nanguo" pears preservation.

Guar gum (GG) composite films, incorporating the ethanolic extract of propolis (EEP), were prepared and subjected to a comprehensive investigation of their functional characteristics. The addition of EEP resulted in a discernible enhancement in the opacity, moisture barrier capacity, and elongation at break. Incorporating EEP led to a noteworthy increase in the total phenolic and total flavonoid content of the films, resulting in superior antioxidant capacity upon GG-EEP films. Remarkably, the addition of 5 % EEP yielded noteworthy outcomes, manifesting in a DPPH radical scavenging rate of 47.60 % and the ABTS radical scavenging rate of 94.87 %, as well as FRAP and cupric reducing power of 331.98 mmol FeSO4-7H2O kg-1 and 56.95 µg TE mg-1, respectively. In addition, GG-EEP films demonstrated antifungal effect against Penicillium expansum and Aspergillus niger, along with a sustained antibacterial effect against Escherichia coli and Staphylococcus aureus. GG-EEP films had superior inhibitory ability against Gram-positive bacteria than Gram-negative bacteria. Crucially, GG-EEP composite films played a pivotal role in reducing both lesion diameter and depth, concurrently mitigating weight loss and firmness decline during the storage period of "Nanguo" pears. Therefore, GG-EEP composite films have the considerable potential to serve as advanced and effective active packaging materials for food preservation.

Improved sustained-release properties of ginger essential oil in a Pickering emulsion system incorporated in sodium alginate film and delayed postharvest senescence of mango fruits.

The insufficient water vapor barrier and mechanical capacity of sodium alginate (SA) film limited its application in fruit preservation. Herein, cellulose nanocrystals (CNCs) were used to stabilize Pickering emulsion. Then, we prepared SA composite films. Ginger essential oil (GEO) was loaded as antimicrobials and antioxidants. Finally, the application on mangos were investigated. Compared to coarse emulsion, Pickering emulsion and its film-formation-solution showed more stable system and larger droplet size. The emulsion significantly changed the properties of SA film. Specifically, CNCs improved the thermal, tensile, and barrier properties of the film and GEO enhanced the ultraviolet-visible light barrier capacity. Additionally, the SA/CNC film possessed a homogeneous micromorphology which had a sustained-release effect on GEO, thus maintaining high postharvest quality and long-term bioavailability for mangos. In conclusion, the film prepared via Pickering emulsion showed satisfactory properties which had great potential in fruit preservation.

Cold atmospheric plasma fumigation suppresses postharvest apple Botrytis cinerea by triggering intracellular reactive oxygen species and mitochondrial calcium.

Infection by Botrytis cinerea poses a great threat to the postharvest life of apple fruit. In this study, the effects of cold atmospheric plasma (CAP) fumigation on apple B. cinerea under different exposure times and intensities were investigated. The growth of B. cinerea in vitro and in vivo was significantly suppressed by the CAP fumigation at least 700 µL/L for 5 min. To reveal the possible mechanism of antifungal activity of CAP fumigation, the pathogen was exposed to 700 µL/L and 1000 µL/L for 5 min, respectively. The results indicated that the CAP-treated spores of the pathogen underwent shrinkage, cell membrane collapse and cytoplasmic vacuolation. The results obtained from the fluorescent probe assay and flow cytometry indicated that CAP caused the accumulation of reactive oxygen species (ROS), the elevation of mitochondrial and intracellular Ca2+ levels, and the decrease in mitochondrial membrane potential of the pathogen. Investigation on statues of cell life showed that typical hallmarks of apoptosis in the CAP-treated B. cinerea spores occurred, as indicted by a large degree of increased phosphatidylserine externalization, dysfunction of membrane permeability, DNA fragmentation, distortion of morphology, chromatin condensation, and metacaspase activation observed in B. cinerea spores after CAP fumigation. Overall, CAP fumigation triggered a metacaspase-dependent apoptosis of B. cinerea spores mediated by intracellular ROS burst and Ca2+ elevation via mitochondrial dysfunction and disruption, and therefore reduced the pathogenicity of B. cinerea and suppressed postharvest Botrytis rot of apple fruit. These results would provide an insight into the underlying mechanism of CAP fumigation acting on the pathogen. The CAP fumigation makes much convenient application of CAP in storage environment to deactivate microorganism.

Polysaccharide-based biosorbents for cholesterol and bile salts in gastric-intestinal passage: Advances and future trends.

Cholesterol is one of the hazard elements for many cardiovascular diseases, but many cholesterol-lowering drugs are expensive and unhealthy. Therefore, it is necessary to develop edible and safe biosorbents to reduce excess cholesterol and bile salts in the gastric-intestinal passage. Polysaccharide-based biosorbents offer a feasible strategy for decreasing them. This review summarized polysaccharide-based biosorbents that have been developed for adsorbing cholesterol and bile salts from the gastric-intestinal passage and analyzed common modification methods for these adsorbents. Finally, the adsorption models were also elucidated. Polysaccharides, including ß-cyclodextrin, pectin, chitin/chitosan, dietary fiber extract, and cellulose, have been proposed for adsorbing cholesterol and bile salts in the gastric-intestinal passage as biosorbents. This is mainly due to the retention of pores, the capture of the viscosity network, and the help of hydrophobic interactions. In spite of this, the adsorption capacity of polysaccharides is still limited. Therefore, the modifications for them became the most popular areas in the recent studies of in vitro cholesterol adsorption. Chemical approaches namely grafting, (1) acetylation, (2) hydroxypropylation, (3) carboxymethylation, and (4) amination are considered to modify the polysaccharides for higher adsorption ability. Moreover, ultrasonic/microwave/pressure treatment and micron technology (microfluidization, micronization, and ball milling) are effective physical modification methods, while the biological approach mainly refers to enzymatic hydrolysis and microbial fermentation. The adsorption models are generally explained by two adsorption isotherms and two adsorption kinetics. In sum, it is reckoned that further food applications will follow soon.

Development of biodegradable active films based on longan seed starch incorporated with banana flower bract anthocyanin extracts and applications in food freshness indication.

The recovery of food by-products is of great significance. Food by-products contain diverse materials showing promise for the development of food packaging or edible coatings. In the present study, the effects of banana flower bract anthocyanin extracts (BFBAEs) on properties of longan seed starch (LSS) films were investigated for the first time. The prepared BFBAEs presented great compatibility with LSS matrix without changing the film chemical structures. The LSS films containing BFBAEs presented improved UV light barrier capacities, increased water vapor permeability, and lowered thermal stability compared to the pure LSS films. Additionally, the introduction of BFBAEs significantly reduced tensile strength and increased elongation at break of LSS films. There is growing demands for the fabrication of intelligent films for the visible monitoring of food freshness. BFBAEs imparted great antioxidant activities and pH-sensitive and ammonia-sensitive discoloration capacities on LSS films. LSS/BFBAEs III films were employed to detect food (beef and shrimp) freshness, and distinguishable color variations could be observed as the food freshness reduced. The LSS-based films were almost completely degraded after 30 days. Two types of by-products were combined to develop novel biodegradable active films, which showed promise for the discernible detection of the freshness of perishable foods.

PsERF1B-PsMYB10.1-PsbHLH3 module enhances anthocyanin biosynthesis in the flesh-reddening of amber-fleshed plum (cv. Friar) fruit in response to cold storage.

Flesh-reddening usually occurs in the amber-fleshed plum (Prunus salicina Lindl.) fruit during cold storage but not during ambient storage direct after harvest. It is not clear how postharvest cold signal is mediated to regulate the anthocyanin biosynthesis in the forming of flesh-reddening yet. In this study, anthocyanins dramatically accumulated and ethylene produced in the 'Friar' plums during cold storage, in comparison with plums directly stored at ambient temperature. Expression of genes associated with anthocyanin biosynthesis, as well as transcription factors of PsMYB10.1, PsbHLH3, and PsERF1B were strongly stimulated to upregulated in the plums in the period of cold storage. Suppression of ethylene act with 1-methylcyclopropene greatly suppressed flesh-reddening and downregulated the expression of these genes. Transient overexpression and virus-induced gene silencing assays in plum flesh indicated that PsMYB10.1 encodes a positive regulator of anthocyanin accumulation. The transient overexpression of PsERF1B, coupled with PsMYB10.1 and PsbHLH3, could further prompt the anthocyanin biosynthesis in a tobacco leaf system. Results from yeast two-hybrid and luciferase complementation assays verified that PsERF1B directly interacted with PsMYB10.1. PsERF1B and PsMYB10.1 enhanced the activity of the promoter of PsUFGT individually, and the enhancement was prompted by the co-action of PsERF1B and PsMYB10.1. Overall, the stimulation of the PsERF1B-PsMYB10.1-PsbHLH3 module mediated cold signal in the transcriptomic supervision of the anthocyanin biosynthesis in the 'Friar' plums. The results thereby revealed the underlying mechanism of the postharvest alteration of the flesh phenotype of 'Friar' plums subjected to low temperature.

Comparative transcriptomic analysis provides novel insights into the difference in textural alteration between mealy and crisp apple patterns.

Mealiness is a common textural deterioration of several fruit after harvest. To unravel the underlying mechanism involved in mealiness, biochemical characterization and global transcriptomic profiling were comparatively performed between mealy 'Hongjiangjun' (HJJ) and crisp 'Fuji' apples. Sensory evaluation and SEM-based microstructure observation showed that HJJ apples appeared to be mealy in only 3 d at 23 ± 1 °C, while Fuji apples did not appear to be mealy even after 28 d of storage. Textural deterioration and ethylene burst occurred more sharply in HJJ apples than in Fuji apples during storage. The results obtained from the dimensional RNA-sequencing analysis showed that a much stronger upregulation of the transcription of genes encoding polygalacturonase (PG), pectin acetylesterase (PAE), pectinesterase (PE), ß-galactosidase (GAL), α-l-arabinofuranase (AF), and expansin (EXP) was observed in the pair of mealy HJJ apples vs. harvest than in the pair of Fuji apples after 28 d vs. harvest. The gene expression of ethylene responsive factor (ERF) was found to be strongly upregulated in HJJ apples compared with Fuji apples, which may mediate the regulation of downstream genes encoding cell wall-modifying enzymes. Weighted gene co-expression network analysis showed that the transcription factors MdbHLH63 and MdERF-like, and a constructure gene of MdGAL had strong connectivity with mealiness. Validation by qRT-PCR further confirmed the main findings obtained by RNA-sequencing. The occurrence of apple mealiness involves altered expression patterns of cell wall-modifying enzymes as well as MdbHLH63 and MdERF-like, which are core genes regulating the mealiness process. The above findings provide global insight into the difference in textural alteration between mealy and crisp apple patterns.

Soluble polysaccharides decrease inhibitory activity of banana condensed tannins against porcine pancreatic lipase.

The inhibition of soluble polysaccharides (SPs) (arabic gum, dextran and pectin from citrus) on the binding between banana condensed tannins (BCTs) and pancreatic lipase (PL) was studied from variant aspects. Molecular docking simulations predicted that BCTs strongly bound SPs and PL through non-covalent interactions. The experimental results showed that SPs reduced the inhibition of BCTs on PL, and the IC50 value increased. However, the addition of SPs did not change the inhibitory type of BCTs on PL, which all were non-competitive inhibition. BCTs quenched PL fluorescence through static quenching mechanism and changed the secondary structure of PL. The addition of SPs alleviated the trending. The effect of SPs on the binding of BCTs-PL was mainly due to the strong non-covalent interaction between SPs and BCTs. This study emphasized that attention should be paid to the counteracting effects of polysaccharides and polyphenols in dietary intake to maximize their respective roles.

The combination treatment of chlorogenic acid and sodium alginate coating could accelerate the wound healing of pear fruit by promoting the metabolic pathway of phenylpropane.

Water loss and microbial infection induced by mechanical injury are the main sources of harvested loss of fruits and vegetables. Plenty studies have shown that regulating phenylpropane-related metabolic pathways can effectively accelerate wound healing. The combination treatment of chlorogenic acid and sodium alginate coating on postharvest wound healing of pear fruit were investigated in this work. The result shows combination treatment reduced weight loss and disease index of the pears, enhanced texture of healing tissues, maintained the integrity of cell membrane system. Moreover, chlorogenic acid increased the content of total phenols and flavonoids, and ultimately leads to the accumulation of suberin poly phenolic (SPP) and lignin around wound cell wall. Activities of phenylalanine metabolism-related enzymes (PAL, C4H, 4CL, CAD, POD and PPO) in wound-healing tissue were enhanced. The contents of major substrates such as trans-cinnamic, p-coumaric, caffeic, and ferulic acids also increased. The presented results suggested that the combination treatment of chlorogenic acid and sodium alginate coating stimulated wound healing in pears by elevating the phenylpropanoid metabolism pathway, so that maintain high postharvest fruit quality.

Advances in propolis and propolis functionalized coatings and films for fruits and vegetables preservation.

Propolis, as a natural active substance, is rich in polyphenols, with low toxicity, antioxidant, antifungal and antibacterial properties, which can be applied to the post-harvest preservation of fruits and vegetables. Propolis extracts and propolis functionalized coatings and films have exhibited good freshness in various types of fruits and vegetables as well as fresh-cut vegetables. They are mainly used to prevent water loss after harvesting, to inhibit the infestation of bacteria and fungi after harvesting and to enhance the firmness and apparent quality of fruits and vegetables. Moreover, propolis and propolis functionalized composites have a small or even insignificant effect on the physicochemical parameters of fruits and vegetables. Furthermore, how to cover the special smell of propolis itself so that it does not affect the flavor of fruits and vegetables, and the application of propolis extract in wrapping paper and packaging bag of fruits and vegetables, are worthwhile to further investigate.

Phytohormone ethylene mediates oligogalacturonic acid-induced growth inhibition in tomato etiolated seedlings.

Plant growth and immunity are tightly interconnected. Oligogalacturonic acids (OGs) are pectic fragments and have been well investigated in plant immunity as a damage-associated molecular pattern. However, little is known regarding how OGs affect plant growth. Here, we reveal that OGs inhibit the growth of intact etiolated seedling by using the horticultural crop tomato as a model. This inhibitory effect is partially suppressed by the action of ethylene biosynthesis inhibitors, or the gene silencing of SlACS2, an essential rate-limiting enzyme for ethylene biosynthesis, suggesting that SlACS2-mediated ethylene production promotes OG-induced growth inhibition. Furthermore, OGs treatment elevates the SlACS2 protein phosphorylation, and its decrease by the kinase inhibitor K252a partially rescue OG-induced growth inhibition, indicating that SlACS2 phosphorylation involves in OG-induced growth inhibition. Moreover, the mitogen-activated protein kinase SlMPK3 could be activated by OGs treatment and can directly phosphorylate SlACS2 in vitro, and the bimolecular fluorescence complementation combining with the yeast two-hybrid assay shows that SlMPK3 interacts with SlACS2, indicating that SlMPK3 may participate in modulating the OG-induced SlACS2 phosphorylation and growth inhibition. Our results reveal a regulatory mechanism at both the transcriptional and post-transcriptional levels by which OGs inhibit the growth of intact plant seedlings.

A comprehensive review of intelligent packaging for fruits and vegetables: Target responders, classification, applications, and future challenges.

Post-harvest fruits and vegetables are extremely susceptible to dramatic and accelerated quality deterioration deriving from their metabolism and adverse environmental influences. Given their vigorous physiological metabolism, monitoring means are lacking due to the extent that unnecessary waste and damage are caused. Numerous intelligent packaging studies have been hitherto carried out to investigate their potential for fruit and vegetable quality monitoring. This state-of-the-art overview begins with recent advances in target metabolites for intelligent packaging of fruits and vegetables. Subsequently, the mechanisms of action between metabolites and packaging materials are presented. In particular, the exact categorization and function of intelligent packaging of fruits and vegetables, are all extensively and comprehensively described. In addition, for the sake of further research in this field, the obstacles that impede the scaling up and commercialization of intelligent packaging for fruits and vegetables are also explored, to present valuable references.

Development and characterization of a novel active and intelligent film based on pectin and betacyanins from peel waste of pitaya (Hylocereus undatus).

In the present study, peel waste of pitaya (Hylocereus spp.) was used to develop a novel active and functional film. The film was developed with a combination of the white-fleshed pitaya peel pectin (WPPP) as a biopolymer and white-fleshed pitaya peel betacyanins (WPPB) as an active constituent, respectively. Furthermore, montmorillonite (MMT), a cheap and environmental-friendly silicate material, was introduced into film matrix as a filler to reduce the moisture sensitivity of the film. The effect of the incorporation of WPPB on the properties of WPPP/MMT films was investigated. The colorimetric response of WPPP/MMT/WPPB to pH and ammonia was examined, respectively. Moreover, WPPP/MMT/WPPB-2 was employed to monitor the freshness of shrimp. The color of the film changed from redness to reddish-brown, and further to brownness, echoing the shrimp turned from fresh to spoiled. Therefore, WPPP/MMT/WPPB-2 composite films showed promise for the applications in monitoring the freshness of shrimp.

Antimicrobial and controlled release properties of nanocomposite film containing thymol and carvacrol loaded UiO-66-NH2 for active food packaging.

In this work, Zirconium-based metal-organic frameworks (MOFs), UiO-66-NH2, were designed as loading carriers for thymol and carvacrol and added into chitosan to construct antimicrobial packaging films. Scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), and thermogravimetric analysis (TGA) were applied to characterize the films. Besides, we analyzed the physical properties, mechanical performance, hydrophobicity, release behavior, and antimicrobial capacity of the films. It can be clearly seen that the addition of thymol and carvacrol loaded MOFs into chitosan film significantly improved the thermal stability, light barrier properties, tensile strength, and hydrophobicity. Importantly, UiO-66-NH2 restrained the release rate of thymol and carvacrol compared with pure chitosan film, which endowed efficient antimicrobial capacity against E. coli, S. aureus, and P. citrinum to chitosan films. Overall, the strategy conceived here can be a superior candidate to develop a premium antimicrobial material for active food packaging, which has potential application prospects.

Tea polyphenols (TP): a promising natural additive for the manufacture of multifunctional active food packaging films.

As a bioactive extract from tea leaves, tea polyphenols (TP) are safe and natural. Its excellent antioxidant and antibacterial properties are increasingly regarded as a good additive for improving degradable food packaging film properties. This article comprehensively reviewed the functional properties of active films containing TP developed recently. The effects of TP addition to enhancing active food packaging films' performance, including thickness, water sensitivity, barrier properties, color, mechanical properties, antioxidant, antibacterial, and intelligent discoloration properties, were discussed. Besides, the practical applications in food preservation of active films containing TP are also discussed. This work concluded that the addition of TP could impart antioxidant and antibacterial properties to active packaging films and act as a crosslinking agent to improve other physical and chemical properties of the film, such as mechanical and barrier properties. However, the effect of TP on specific properties of the active packaging film is complex, and the appropriate TP concentration needs to be selected according to the type of film matrix and the interaction between the components. Notably, the addition of TP improved the efficiency of the active packaging film in food preservation applications, which accelerates the process of replacing the traditional plastic-based food packaging with active packaging film.

The Classification of Axial Deformity in Patients with Basilar Invagination.

OBJECTIVE: To summarize the variation types of the axis in patients with basilar invagination (BI), then propose a classification scheme of the axis deformity. METHODS: From December 2013 to September 2020, 92 patients (male 42, female 50) who were diagnosed with BI were studied retrospectively. Based on the imaging data of CT, the width and height of the axis pedicle and the sagittal diameter of the lateral mass were measured in each patient. According to the development of axis pedicle and lateral mass, the types of axis variation were summarized, and then the classification scheme of axis deformity was put forward. RESULTS: All cases were analyzed and axis deformities were divided into four types. Type I: the axis is basically normal (53 cases, 57.6%). Type II: axis lateral mass is dysplasia (eight cases, 8.7%), which includes two subtypes: type IIA, the axis unilateral lateral mass is dysplasia (three cases); type IIB, the axis bilateral lateral masses are all dysplasia (five cases). Type III: axis pedicle is dysplasia (11 cases, 12%), which is subdivided into two subtypes: type IIIA, the axis unilateral pedicle is dysplasia (six cases); type IIIB, the axis bilateral pedicles are all dysplasia (five cases). Type IV: axis pedicle and lateral mass are all dysplasia (20 cases, 21.7%), this type contains the following four subtypes: type IVA, the unilateral axis pedicle and unilateral lateral mass (contralateral or ipsilateral) are all hypoplasia (four cases); type IVB, the unilateral axis pedicle and bilateral lateral masses are all hypoplasia (five cases); type IVC, the bilateral axis pedicles and unilateral lateral mass are all dysplasia (seven cases); type IVD, the bilateral axis pedicles and bilateral lateral masses are all dysplasia (four cases). The left and right abnormal lateral mass sagittal diameter (Type II) was (7.23 ± 1.39) mm and (5.96 ± 1.37) mm, respectively, the left and right abnormal pedicle width (Type III) was (2.61 ± 1.01) mm and (3.23 ± 0.66) mm, respectively, left and right abnormal pedicle height (Type III) was (5.43 ± 2.19) mm and (4.92 ± 1.76) mm, respectively. Moreover, the classification scheme has good repeatability and credibility. CONCLUSIONS: The classification about axis deformity could provide personalized guidance for axis screw placement in the BI and other upper cervical surgery, and axis screw placement errors would be effectively avoided.

Analysis of film-forming properties of chitosan with different molecular weights and its adhesion properties with different postharvest fruit surfaces.

In this work, the film-forming properties of chitosan with different molecular weights (MW) (30, 100, 200 and 300 kDa) and its adhesion properties with different postharvest fruit surfaces were analyzed. The viscosity of 30 and 300 kDa chitosan film-forming solution gradually increased from 0.007 to 1.16 Pa.s at a shear rate of 10 s-1. Compared to 30 kDa chitosan films, higher MW chitosan films showed enhanced water resistance, water vapor barrier properties and mechanical properties, mainly due to the different strength of interaction forces within the chitosan films, which can be confirmed by microstructural observations and FTIR results of the films. It can be found that different MW chitosan film surfaces with bananas, apples, pears, oranges and strawberries all have a similar adhesion work of about 70-80 mN m-1, and 100 and 200 kDa chitosan film had higher adhesion work with different fruit surfaces compared to 30 and 300 kDa.