Ozone and Laser Effects on Dentin Hypersensitivity Treatment: A Randomized Clinical Study.

INTRODUCTION: The aim of this study was to evaluate and compare the clinical efficacy of diode laser and ozone gas in the treatment of dentin hypersensitivity (DHS). METHODS: One hundred thirty-two teeth from 44 patients with moderate DHS were randomized into 3 groups according to a split-mouth design. In the diode laser group, the operator irradiated the superficial dentin exposed with an 808-nm wavelength and incremental power from 0.2 to 0.6 W with a 20-second interval. In the ozone gas group, the operator applied a high dose of ozone (32 g/m3) for 30 seconds using a silicon cup. In the placebo group, no therapy was applied. The dentin sensitivity level was evaluated upon enrollment (T0), immediately after treatment (T1), 3 months post-treatment (T2), and 6 months post-treatment (T3) with a cold air blast challenge and tactile stimuli. The pain severity was quantified according to the visual analogue scale. The Wilcoxon signed rank test was used to scrutinize potential statistical disparities among the treatments. Statistical significance was predetermined at P < .05. RESULTS: A significant decrease of DHS was observed in the ozone gas group and the `diode laser group immediately after treatment and after 3 and 6 months of the therapy. After 6 months from the therapy, the sensitivity values in the teeth treated with ozone gas remained statistically lower than those treated with diode lasers (P < .05). CONCLUSIONS: A laser diode and ozone gas are both efficient as dentin sensitivity treatment. Ozone maintains an invariable effectiveness after 6 months.

Low-Level Laser Therapy for the Treatment of Oral Mucositis Induced by Hematopoietic Stem Cell Transplantation: A Systematic Review with Meta-Analysis.

Oral mucositis is a common and debilitating side effect induced by stem cell transplantation that is experienced by cancer patients undergoing chemotherapy or radiation therapy. This condition involves inflammation and ulceration of the oral mucosa, leading to pain, difficulty with eating and speaking, and an increased risk of infections. Mucositis not only compromises the quality of life for cancer patients, but also affects treatment outcomes and may necessitate dose reductions or treatment delays. This scientific article provides a comprehensive overview of mucositis. The purpose of this literature review with a meta-analysis is to evaluate the efficacy of laser therapy in treating post-transplant mucositis. Materials and methods: A search of the literature from 3 May 2023 was carried out on three online databases, PubMed, Scopus, and Web of Science. Only studies that treated patients with laser therapy were considered; only studies with the placebo-treated control group were considered. Review Manager version 5.2.8 (Cochrane Collaboration) was used for the pooled analysis. We measured the std. mean difference between the two groups (laser and placebo). Results: There were 230 papers included in this review. Two hundred twenty-seven were excluded. Furthermore, a manual search was performed. After the search phase, three articles were considered in the study. The overall effect showed differences in the degree of mucositis in the laser-treated patients compared with the placebo group. The meta-analysis shows a reduction in the degree of mucositis in the patients treated with laser therapy (std. mean difference -1.34 [-1.98; -0.98]; C.I. 95%). Conclusions: The application of laser therapy results in decreased severity of oral mucositis from radiation and chemotherapy. Our study shows that the application of low-level laser therapy in the treatment of transplant mucositis has excellent efficacy in relieving the symptoms and severity of mucositis.

The socket shield technique and its complications, implant survival rate, and clinical outcomes: a systematic review.

PURPOSE: The aim of this systematic review was to evaluate the effectiveness of the socket shield technique (SST), an innovative surgical method introduced in 2010, for reducing buccal bone plate resorption. METHODS: The review was conducted following the PRISMA guidelines. Clinical studies conducted in humans and investigating the SST were searched on PubMed (MEDLINE), Embase, Web of Knowledge, and Google Scholar in November and December 2021. The implant survival rate, percentage of complications, and clinical parameters (marginal bone loss [MBL], pink esthetic score [PES], and buccal bone plate resorption [BBPR]) were analyzed using the collected data. RESULTS: The initial search resulted in 132 articles. After article screening, the full texts of 19 studies were read and 17 articles were finally included in the review. In total, 656 implants were installed with the SST. Nine of the 656 implants experienced failure, resulting in an implant survival rate of 98.6%. The percentage of complications was about 3.81%. The analysis of clinical parameters (MBL, PES, and BBPR), showed favorable results for the SST. The mean MBL in implants placed with the SST was 0.39±0.28 mm versus 1.00±0.55 mm in those placed without the SST. PES had a better outcome in the SST group, with an average of 12.08±1.18 versus 10.77±0.74. BBPR had more favorable results in implants placed with the SST (0.32±0.10 mm) than in implants placed with the standard technique (1.05±0.18 mm). CONCLUSIONS: The SST could be considered beneficial for preserving the buccal bone plate. However, since only 7 of the included studies were long-term randomized controlled trials comparing the SST with the standard implant placement technique, the conclusions drawn from this systematic review should be interpreted with caution. TRIAL REGISTRATION: PROSPERO Identifier: CRD42020180637.

Effect of Light-Sources and Thicknesses of Composite Onlays on Micro-Hardness of Luting Composites.

The aim of this study was to compare three different light-curing-units (LCUs) and determine their effectiveness in the adhesive cementation of indirect composite restorations when a light-curing resin cement is used. Two resin composites were selected: Enamel Plus HRI (Micerium) and AURA (SDI). Three thicknesses (3 mm, 4 mm and 5 mm) were produced and applied as overlays and underlays for each resin composite. A standardized composite layer was placed between underlay and overlay surfaces. Light curing of the resin-based luting composites was attained through the overlay filters using LCUs for different exposure times. All specimens were allocated to experimental groups according to the overlay thickness, curing unit and curing time. Vickers Hardness (VH) notches were carried out on each specimen. Data were statistically evaluated. The curing unit, curing time and overlay thickness were significant factors capable of influencing VH values. The results showed significantly decreased VH values with increasing specimen thickness (p < 0.05). Significant differences in VH values were found amongst the LCUs for the various exposure times (p < 0.05). According to the results, a time of cure shorter than 80 s (with a conventional quartz-tungsten-halogen LCU) or shorter than 40 s (with a high-power light-emitting diode (LED) LCU) is not recommended. The only subgroup achieving clinically acceptable VH values after a short 20 s curing time included the 3 mm-thick overlays made out of the AURA composite, when the high-power LED LCU unit was used (VH 51.0). Composite thickness has an intense effect on polymerization. In clinical practice, light-cured resin cements may result in insufficient polymerization for high thickness and inadequate times. High-intensity curing lights can attain the sufficient polymerization of resin cements through overlays in a significantly shorter time than conventional halogen light.

Microtensile Bond Strength of Etch-and-Rinse Adhesives in Different Hydroabrasion Conditionings.

The aim of the present study was to in vitro evaluate the effect of dentin conditioning with hydroabrasion on the microtensile bond strengths of three adhesive systems, compared to the standard etch-and-rinse technique. Sixty extracted human third molars were collected, and their midcoronal occlusal dentin was used for the microtensile bond strength test. Teeth were randomly assigned to three groups according to the adhesive system used: ExciTE F DSC, ENA Bond, and Scotchbond Universal. Specimens from each group were further divided into four subgroups: control specimens were treated with standard adhesive procedures; hydroabraded (HA) specimens were subjected to preventive hydroabrasion with three different intensity levels. After bonding procedures, composite crowns were incrementally built up. After thermocycling, specimens were subsequently sectioned into 1 × 1 mm sticks, and microtensile bond strengths were measured. Data were statistically analyzed. Failure mode analysis was performed. There were no significant differences in terms of bond strength between standard adhesion protocols and adhesion with HA preconditionings. On the other hand, the type of adhesive used had a significant effect on the tensile bond strength. Subgroups treated with hydroabrasion at higher intensity showed a slightly increased frequency of cohesive fractures. In conclusion, hydroabrasion can be used for dentin cavity preparation or finishing, since it does not seem to affect the bonding effectiveness.

Debonding and Clean-Up in Orthodontics: Evaluation of Different Techniques and Micro-Morphological Aspects of the Enamel Surface.

There is currently no consensus on the best way to remove adhesive remnants from teeth following debonding. The main objective of this study is to evaluate and compare the effectiveness of four adhesive resin removal (clean-up) techniques, performed with or without the use of an operative microscope. Forty human teeth were duplicated using an epoxy resin for impregnation. Brackets were bonded to teeth and debonded from teeth. Then, the samples were randomly divided into two equal groups-the naked eye group and the magnification group-and further subdivided into four equal subgroups, in order to compare the different techniques used for the clean-up. Each subgroup was formed of five natural teeth with the respective pre- and post-bonding replicas. Macro- and micro-analysis by means of a stereomicroscope and scanning electron microscopy evaluated, qualitatively and quantitatively, the adhesive remnant index and the damage index of the enamel. Overall, the magnification improved the removal of resins compared to the naked eye (p < 0.001), and the use of magnification constantly reduced resin residual and surface damage. Enamel damage and adhesive residual from the clean-up procedures represent an ascertained risk in orthodontics. The use of a magnification system improves the quality of debonding and clean-up techniques in a significant way.

Association of Visual Defects and Occlusal Molar Class in Children.

PURPOSE: The purpose of this cross-sectional study is to evaluate the presence of any correlations between dysfunctions related to visual impairments and dental occlusion. METHODS: The test group included 34 subjects (21 males and 13 females; mean age 11 ± 2 years) randomly selected with the following inclusion criteria: absence of any diagnosis for problems at visual level except those related to refractive defects, visual acuity of at least 1.0, absence of any syndrome or malformation in the craniofacial area, good general health, and absence of any systemic disease able to influence the vision or the craniofacial growth. They underwent visual clinical tests to evaluate the presence of fusional vergence defects and amplitude. Each patient underwent an orthodontic clinical exam and the occlusal molar relationship of each subject was recorded and considered as occlusal variable. A statistical analysis with Chi-Squared test was performed in order to analyze the associations between the visual defects and the occlusal variable. RESULTS: A statistically significant association between the molar occlusal relationship and the occurrence of exodeviations was observed. The percentage of subjects presenting fusional amplitudes with convergence lower of the cut-off value was statistically significantly higher in the group of occlusal molar second class. CONCLUSIONS: The results obtained show that there is an association between occlusal second molar class and fusional vergence defects.

Dental students' knowledge of medication-related osteonecrosis of the jaw.

OBJECTIVES: The aim of this study was to evaluate and assess knowledge and attitude of dental students about medication-related osteonecrosis of the jaw (MRONJ), to optimize future training programs in this field. MATERIALS AND METHODS: A cross-sectional study was administrated. Ninety-eight participants agreed to complete an anonymous questionnaire. It was divided into two sections: the first section was about general information such as interviewer's gender and date of birth; the second section included questions about bisphosphonates (BPs), others medication associated to osteonecrosis of the jaw (ONJ), risk factors, and prevention of osteonecrosis. Descriptive statistics were computed and the odds ratio was used to compare the odds for the groups. RESULTS: Ninety-nine percent of participants declared to know BPs, but only 26.9% of 4th year and 34.8% of 6th year students knew the correct definition of MRONJ. Almost all of students identified the importance to report, in anamnesis, the use of BPs, as well as to check-up patients before the beginning of treatment; on the other hand, the knowledge about how invasive dental treatment might be carried out in patients under therapy was not adequate. In addition, half of the students did not recognize any active principle or commercial name of BPs. The situation was even worse regarding alternative drugs involved in ONJ. CONCLUSIONS: These findings are alarming and the lack of knowledge about MRONJ suggests that greater educational efforts should be performed about this pathology at undergraduate level.

Peri-implantitis and extracellular matrix antibodies: A case-control study.

OBJECTIVE: The aim of this case-control study was to compare patients with a healthy peri-implant environment and patients affected by peri-implantitis, evaluating the occurrence of antibodies to extracellular matrix (ECM) molecules. The authors hypothesized the presence of ECM autoantibodies in serum of peri-implantitis patients. MATERIALS AND METHODS: Patients were divided into two groups: one with dental implants with a diagnosis of peri-implantitis and one control group with implants classified as being "healthy." Enzyme-linked immunosorbent assay was performed on patients' sera to detect human antibodies to type I, III, IV, and V collagens, laminin, and fibronectin. Fisher exact test was performed to evaluate statistical association, with a significant P < 0.05. RESULTS: Forty-two patients were enrolled in this study, 27 females (64.28%) and 15 males (35.72%) with a mean age of 53 ± 29.69 years (age range 32-74). The presence of antibodies to CIII was recorded in 6/21 (28.57%) patients of test group, compared to just 2/21 (9.52%) for the control group, showing a statistically significant difference (P < 0.05). Other antibodies tested were found to be not statistically significant or absent. CONCLUSIONS: Within the limitations of this study, it can be concluded that further studies, with larger sample and different design, are necessary to address the research purpose, evaluating possible associations between anti-ECM antibodies and peri-implantitis.

Canal shaping of different single-file systems in curved root canals.

BACKGROUND/PURPOSE: This study compared maintenance of canal anatomy, occurrence of apical transportation, and working time observed after instrumentation with One Shape New Generation rotary system (Micro-Mega), with those observed after instrumentation with Reciproc (VDW) and WaveOne (Dentsply-Maillefer) reciprocating systems. MATERIALS AND METHODS: The mesial canals of 45 mandibular molars (curvature angles between 35° and 45°) were selected. Specimens were randomly divided into three groups, and canal preparations were performed using One Shape, Reciproc, or WaveOne systems (size #25). A digital double radiographic technique was used to determine apical transportation and change in angle of curvature. Also, working time and instrument failures were recorded. Data were statistically analyzed. RESULTS: During preparation, no file fractured. No statistically significant differences were found among groups. No system showed a significantly faster preparation time than others (P > 0.05). All instruments maintained the original canal curvature well and were safe to use. CONCLUSION: Both continuous rotary instrument and reciprocating systems did not have any influence on the presence of apical transportation or caused an alteration in angle of canal curvature.

Effect of Airborne Particle Abrasion on Microtensile Bond Strength of Total-Etch Adhesives to Human Dentin.

Aim of this study was to investigate a specific airborne particle abrasion pretreatment on dentin and its effects on microtensile bond strengths of four commercial total-etch adhesives. Midcoronal occlusal dentin of extracted human molars was used. Teeth were randomly assigned to 4 groups according to the adhesive system used: OptiBond FL (FL), OptiBond Solo Plus (SO), Prime & Bond (PB), and Riva Bond LC (RB). Specimens from each group were further divided into two subgroups: control specimens were treated with adhesive procedures; abraded specimens were pretreated with airborne particle abrasion using 50 µm Al2O3 before adhesion. After bonding procedures, composite crowns were incrementally built up. Specimens were sectioned perpendicular to adhesive interface to produce multiple beams, which were tested under tension until failure. Data were statistically analysed. Failure mode analysis was performed. Overall comparison showed significant increase in bond strength (p < 0.001) between abraded and no-abraded specimens, independently of brand. Intrabrand comparison showed statistical increase when abraded specimens were tested compared to no-abraded ones, with the exception of PB that did not show such difference. Distribution of failure mode was relatively uniform among all subgroups. Surface treatment by airborne particle abrasion with Al2O3 particles can increase the bond strength of total-etch adhesives.

Effects of critical thermal cycling on the flexural strength of resin composites.

We compared flexural strength (FS) in four resin composites before and after three protocols for thermal cycling aging. Four resin composites were evaluated: Enamel Plus Hri, Gradia Direct Posterior, Grandioso, and Grandioso Flow. Sixty specimens (2 × 2 × 25 mm) were fabricated using a split metallic mold and light-cured for 30 s. The specimens were then randomly divided into four groups and tested using one of the following thermal cycling procedures: (1) storage in deionized water for 24 h (control group), (2) 15,000 cycles, 3) 30,000 cycles, and 4) 45,000 cycles. Each thermal cycling procedure was conducted between 5 °C and 55 °C, with a dwell time of 30 s. All specimens were subjected to a three-point bending test, to determine FS (0.5 mm/min). "Material" and "thermal aging" were significantly associated with FS (P < 0.001). A statistically significant interaction between the two factors was also detected (P < 0.001). In the non-aged groups, nanohybrid composites had the highest FS. FS significantly decreased after thermal cycling protocols in all composites tested. Gradia composite exhibited decrease in FS only after 45,000 cycles. In contrast, FS significantly decreased in the Grandioso Flow composite at 15,000 cycles. The trend in the decrease varied among composites, and the decrement in FS was not proportional to baseline values.

Immediate occlusal loading of one-piece zirconia implants: five-year radiographic and clinical evaluation.

PURPOSE: To evaluate radiographic and clinical outcomes of immediate occlusally loaded one-piece zirconia implants after 5 years of follow-up. MATERIALS AND METHODS: This longitudinal clinical investigation included patients older than 18 years, in need of implant-supported single-unit dental rehabilitations. One-piece zirconia in healed and postextraction sites and immediately restored with provisional crowns in light occlusal contact. Definitive zirconia-ceramic restorations were delivered 3 to 4 months after surgery. Primary estimated outcomes were implant survival and success. Periapical radiographs were taken at implant insertion (T0), after 1 year (T1), and after 5 years (T2) to assess marginal bone loss (MBL). Probing depth (PD), modified Bleeding Index (mBI), modified Plaque Index (mPI), and gingival recession (REC) were also measured repeatedly for implants and reference teeth. Changes in parameters over time were assessed using the Wilcoxon signed rank test. In addition, multilevel mixed effects linear and logistic regression models were fitted to take into account within-subject correlations and baseline values. RESULTS: Thirty-two implants were inserted in postextraction and healed sites (n = 16 of each) in 17 patients. One immediate implant was lost after 3 months, and one patient with one implant dropped out after T1. Therefore, the cumulative survival rates were 96.9% at T1 and 96.8% at T2 (4.3 to 6 years). No significant differences were observed in mean MBL between immediate and delayed implants at either T1 or T2. Moreover, different baseline parameters (sex, arch, implant location, smoking habits, grafting) did not show any influence on MBL at either time. In general, for all clinical parameters (PD, mBI, mPI, REC), implants seemed to perform similar to if not better than natural teeth. CONCLUSION: Radiographic and clinical evaluations after 5 years showed satisfactory amounts of MBL and acceptable soft tissue health.

Variable torque prescription: state of art.

The variable prescription is widely described under the clinical aspect: the clinics is the result of the evolution of the state-of-the-art, aspect that is less considered in the daily literature. The state-of-the-art is the key to understand not only how we reach where we are but also to learn how to manage propely the torque, focusing on the technical and biomechanical purpos-es that led to the change of the torque values over time. The aim of this study is to update the clinicians on the aspects that affect the torque under the biomechanical sight, helping them to understand how to managing it, following the "timeline changes" in the different techniques so that the Variable Prescription Orthodontic (VPO) would be a suitable tool in every clinical case.

Presentation of a keratocystic odontogenic tumor with agenesis: a case report.

INTRODUCTION: We analyzed the etiopathogenetic, clinical, radiographic, and histopathologic aspects of keratocystic odontogenic tumors, particularly in association with dental anomalies of number, with the aim of providing useful information for their correct diagnosis, treatment, and prognosis within a multidisciplinary approach. CASE PRESENTATION: A 14-year-old Caucasian girl presented for observation of bilateral agenesis of the upper incisors, which was diagnosed by orthopantomography. Approximately one year after starting orthodontic treatment, the patient went to the emergency department because of a phlegmonous tumefaction of the lateroposterior upper left maxillary region. Diagnostic orthopantomography and axial computed tomography scan results of the facial skeleton revealed a large lesion occupying the left maxillary sinus, rhizolysis of dental elements 26 and 27, and dislocation of dental element 28. The lesion and infected sinus mucosa were removed through surgical antral-cystectomy with the Caldwell-Luc approach. Histological examination of the lesion confirmed the suspected diagnosis of keratocystic odontogenic tumor. The 12-month follow-up orthopantomography and computed tomography scan results showed good trabecular bone formation in the lesion area. The 24-month follow-up results showed optimal healing in the area of the lesion, positive pulp vitality tests for teeth 26 and 27, and good periodontal tissue healing, as verified through periodontal probing. CONCLUSIONS: Combined with our observations from a careful review of the literature, the results of the case study suggest that keratocystic odontogenic tumor and dental agenesis probably do not develop through a common genetic cause. More likely, they are caused by related environmental factors. Management of this case required the multidisciplinary collaboration of different specializations and careful planning to devise a correct therapeutic protocol and reach a favorable prognosis.

Thermal cycling for restorative materials: does a standardized protocol exist in laboratory testing? A literature review.

In vitro tests continue to be an indispensable method for the initial screening of dental materials. Thermal cycling is one of the most widely used procedures to simulate the physiological aging experienced by biomaterials in clinical practice. Consequently it is routinely employed in experimental studies to evaluate materials' performance. A literature review aimed to elucidate test parameters for in vitro aging of adhesive restorations was performed. This study aims to assess whether or not a standardized protocol of thermal cycling has been acknowledged from a review of the literature. An exhaustive literature search, examining the effect of thermal cycling on restorative dental materials, was performed with electronic database and by hand. The search was restricted to studies published from 1998 to August 2013. No language restrictions were applied. The search identified 193 relevant experimental studies. Only twenty-three studies had faithfully applied ISO standard. The majority of studies used their own procedures, showing only a certain consistency within the temperature parameter (5-55°C) and a great variability in the number of cycles and dwell time chosen. A wide variation in thermal cycling parameters applied in experimental studies has been identified. The parameters selected amongst these studies seem to be done on the basis of convenience for the authors in most cases. A comparison of results between studies would appear to be impossible. The available data suggest that further investigations will be required to ultimately develop a standardized thermal cycling protocol.

Genetics of syndromic and nonsyndromic cleft lip and palate.

Cleft of the lip with or without cleft palate (CL/P) represents one of the commonest congenital malformations in Western countries. Based on their association with specific malformative patterns or their presence as isolated defects, CL/P can be classified as syndromic and nonsyndromic, respectively. Both forms of CL/P are characterized by a strong genetic component. Syndromic forms are in many cases due to chromosomal aberrations or monogenic diseases. Among these, the Van der Woude syndrome, caused by mutation of the IRF6 gene, represents the commonest form of syndromic CL/P, accounting for about 2% of all cases. On the other hand, nonsyndromic CL/P is a multifactorial disease derived by the interaction between genetic and environmental factors. In recent years, great efforts have been made to identify the genes involved in the susceptibility to nonsyndromic CL/P and to disclose their relationship with specific environmental risk factors, to get information about the pathogenic mechanism leading to the malformation. In this article, we will review the most recent findings about the genes involved in the pathogenesis of syndromic and nonsyndromic CL/P, to provide information about the opportunity in the future to use specific genetic testing for the identification of at-risk mothers and the prevention of the disease based on a personalized approach.

Effect of c-Met expression on survival in head and neck squamous cell carcinoma.

The proto-oncogene c-Met has been suggested to be associated with progression of squamous cell carcinoma of the head and neck. The aims of the present study were to assess the prevalence of c-Met expression in oral squamous cell carcinoma (OSCC) and to verify whether c-Met can be considered a marker of prognosis in these patients. In a retrospective study, a cohort of 84 OSCC patients was investigated for c-Met expression and its cellular localization by immunohistochemistry. After grouping for c-Met expression, OSCC patients were statistically analyzed for the variables age, gender, histological grading, tumor node metastasis, staging and overall survival rate. Univariate and multivariate statistics were used for data analysis. Sixty-nine cases (82.2%) of OSCC showed immunopositivity, with a mainly membranous expression and scattered areas also showing a cytoplasmic localization, whereas 15 cases (17.8%) did not show c-Met. No statistical association was found between c-Met expression and any variables considered at baseline, apart from the higher number of c-Met positivity in females (p = 0.026). Among positive tumors, well-differentiated areas showed low or absent cytoplasmic expression, while low-differentiated areas showed both membranous and cytoplasmic positivity. In terms of prognostic significance, c-Met expression was found to have an independent association with a poorer overall survival rate (p = 0.036). On the basis of these results, it is possible to suggest c-Met as an early marker of poor prognosis, a hallmark of aggressive biological behavior in OSCC, suggested to be useful in identifying cases of OSCC before the relapse.

Bcl-2 as prognostic factor in head and neck squamous cell carcinoma.

A series of 66 cases of oral squamous cell carcinoma (OSCC) was retrospectively analyzed by immunohisto-chemistry for bcl-2 expression to verify its predictive value for clinical outcome in patients with OSCC. After grouping for bcl-2 expression, OSCCs were statistically analyzed for the variables age, gender, histological grading (G), TNM, staging, recurrence, and overall survival rate. Univariate and multivariate (Cox regression) analyses were performed. Thirty-six OSCC (54.5%) showed expression for bcl-2, whereas 30 (44.5%) were negative. No statistical association was found between bcl-2 expression and any variables considered at baseline. Overall disease-specific survival rate at 72 months was 51%, independently from the extent of the tumor. In terms of prognostic significance, the bcl-2-positive group showed more than 60% survival at 72 months whereas the bcl-2-negative group showed none. An independent association of bcl-2 expression was found with an improved overall survival rate (p = 0.048), although grading and staging were established to be the best baseline markers of prognosis. On the basis of these results, it is possible to suggest bcl-2 as an early marker of prognosis: lack of bcl-2 expression could constitute a hallmark of aggressive biological behavior in OSCC.