Fluorescent sensor for Cr(VI) based in functionalized silicon quantum dots with dendrimers.

Highly luminescent nanoparticles based in Silicon quantum dots, coated by hydroxyl PAMAM dendrimer (PAMAM-OH) of 5th generation, were obtained by one step process by hydrothermal treatment of 3-Aminopropyl)triethoxysilane (APTES) in aqueous solution. Previous to the optimization of the synthesis procedure, different dendritic molecules of 5th generation were tested to obtain the most intense fluorescence signal. The influence of different parameters such ratio APTES/PAMAM-OH, pH and ionic strength on the fluorescence intensity was studied. The fluorescence spectra showed maximum excitation and emission wavelengths at 370 and 446 nm, respectively. The obtained silicon nanoparticles (SiQDs@PAMAM-OH) were characterized by TEM, DLS and XPS, and were found to detect selectively Cr(VI) in aqueous solutions at 2.7 µM level of detection, sensitivity of 0.2 µM with a RSD of 0.16% (n=10). To study the feasibility of the proposed system for Cr(VI) detection, it was tested in real electrochemical solution bath and a tanning effluent obtained from electrochemical industry and with two certified waters, demonstrating promising outcomes as nano-sensor.

Component analysis of fluorescence spectra of thiol DAB dendrimer/ZnSe-PEA nanoparticles.

The fluorescence spectroscopy technique is an accurate method and has great utility in the interpretation of complex systems based on several emission bands. An interpretation of the system requires determination of the number, positions and intensities of the spectral components. In this work, the emission spectra of the synthesized ZnSe complex coated with O-phosphorylethanolamine (ZnSe-PEA), both with and without thiol DAB dendrimer generation 5 (S-DAB G5), were analyzed using a combination of asymmetric (log-normal) and symmetric (Gaussian) models. The method applied for the deconvolution of fluorescence spectra has proven to be very sensitive for observing the stability of the ZnSe-PEA complex after binding with S-DAB. The ZnSe-PEA emission spectrum contains two components. The positions of the emission maxima of these two components are not significantly affected by the presence of S-DAB G5 in the complex, which revealed the presence of a stable complex at a pH of 7. By applying the spectral deconvolution method, strong evidence was obtained that suggested that the ZnSe-PEA complex is stable after complexation with S-DAB G5.

Thiolated DAB dendrimer/ZnSe nanoparticles for C-reactive protein recognition in human serum.

A nanocomposite obtained by a thiol DAB-dendrimer (generation 5), coated with fluorescent ZnSe quantum dots, was successfully synthesized for the selective recognition of C-reactive protein. The procedure presented was carried out by a novel, cheap and non-toxic bottom up synthesis. The nanocomposite showed an excitation at 180 nm, with two emission bands at 411 and 465 nm, with a full-width at half-maximum of 336 nm. The Stokes shift was influenced by the presence of coating molecules and the intensity was dependent on pH due to the presence of a charge transfer process. The transmission electron microscopy images demonstrated that the spherical nanoparticles obtained displayed a regular shape of 30 nm size. The fluorescence intensity was markedly quenched by the presence of C-reactive protein, with a dynamic Stern-Volmer constant of 0.036 M(-1). The quenching profile shows that about 51% of the ZnSe QDs are located in the external layer of the thiol dendrimer accessible to the quencher. The precision of the method obtained as relative standard deviation was 3.76% (4 mg L(-1), n=3). This water soluble fluorescent nanocomposite showed a set of favorable properties to be used as a sensor for the C-reactive protein in serum samples, at concentrations of risk levels.

Thiolated DAB dendrimers and CdSe quantum dots nanocomposites for Cd(II) or Pb(II) sensing.

Four different generation of thiol-DAB dendrimers were synthesized, S-DAB-G(x) (x=1, 2, 3 and 5), and coupled with CdSe quantum dots, to obtain fluorescent nanocomposites as metal ions sensing. Cd(II) and Pb(II) showed the higher enhancement and quenching effects respectively towards the fluorescence of S-DAB-G(5)-CdSe nanocomposite. The fluorescence enhancement provoked by Cd(II) can be linearized using a Henderson-Hasselbalch type equation and the quenching provoked by Pb(II) can be linearized by a Stern-Volmer equation. The sensor responds to Cd(II) ion in the 0.05-0.7µM concentration range and to Pb(II) ion in the 0.01-0.15mM concentration range with a LOD of 0.06mM. The sensor has selectivity limitations but its dendrimer configuration has analytical advantages.

Bienzyme sensors based on novel polymethylferrocenyl dendrimers.

Amperometric bienzyme electrodes with horseradish peroxidase (HRP) and glucose oxidase (GOx) co-immobilized on polymethylferrocenyl dendrimers deposited onto platinum electrodes have been used for determination of the hydrogen peroxide produced by the oxidase during the enzymatic reaction. The redox dendrimers consist of flexible poly(propylenimine) dendrimer cores functionalised with octamethylferrocenyl units. The effects of dendrimer generation, the thickness of the dendrimer layer, substrate concentration, interferences, and reproducibility on the response of the sensors were investigated. The new bienzyme biosensors respond to substrate at work potential values between 200 and 50 mV (vs. SCE), have good sensitivity, and are resistant to interferences. Figure.

Cobaltocenium-functionalized poly(propylene imine) dendrimers: redox and electromicrogravimetric studies and AFM imaging.

The first four generations of cobaltocenium-functionalized, diaminobutane-based poly(propylene imine) dendrimers DAB-dend-Cb,(PFb)x (x = 4, 8, 16, and 32; Cb=[Co(eta5-C5H4CONH)(eta5-C5H5)] (1-4) have been synthesized and characterized. The redox activity of the cobaltocenium centers in 1-4 has been characterized by using cyclic voltammetry and the electrochemical quartz-crystal microbalance (EQCM). All of the dendrimers exhibit reversible redox chemistry associated with the cobaltocenium/cobaltocene redox couple. Upon reduction. the dendrimers exhibit a tendency to electrodeposit onto the electrode surface, which is more pronounced for the higher generations. Pt and glassy carbon electrodes could be modified with films derived from 1-4,exhibiting a well-defined and persistent electrochemical response. EQCM measurements show that the dendrimers adsorb, at open circuit, onto platinum surfaces at monolayer or submonolayer coverage. Cathodic potential scanning past -0.75 V at which the cobaltocenium sites are reduced, gave rise to the electrodeposition of multilayer equivalents of the dendrimers. The additional material gradually desorbs upon re-oxidation so that only a monolayer equivalent remains on the electrode surface. Changes in film morphology as a function of dendrimer generation and surface coverage were studied by using admittance measurements of the quartz-crystal resonator on the basis of its electrical equivalent circuit, especially in terms of its resistance parameter. In general, we find that films of the lower dendrimer generation 1 behave rigidly, whereas those of the higher generation 4 exhibit viscoelastic behavior with an intermediate behavior being exhibited by 2 and 3. Using tapping-mode atomic force microscopy (AFM). we have been able to obtain molecularly resolved images of dendrimer 4 adsorbed on a Pt(111) electrode.