RESUMO
Known as the degenerative disease of the knee with the highest prevalence, knee osteoarthritis (KOA) is characterized by a gradual destructive mechanism that, in severe cases, can provoke the need for total knee substitution. As the disease progresses, various enzymatic, immunological, and inflammatory processes abnormally degrade hyaluronic acid (HA), SF's main component, and affect the concentrations of specific proteins, with the final results seriously endangering synovial fluid (SF)'s rheological and tribological features and characteristics. No effective treatments have been found to stop the progression of KOA, but the injection of HA-based viscoelastic gels has been considered (alone or combined with physiotherapy (PT)) as an alternative to symptomatic therapies. In order to evaluate the effect of viscosupplementation and PT on the characteristics of SF, SF aspirated from groups treated for KOA (HA Kombihylan® and groups that received Kombihylan® and complex PT) was analyzed and compared from analytical, spectrophotometrical, and rheological perspectives. In the patients treated with PT, the SF extracted 6 weeks after viscosupplementation had a superior elastic modulus (G') and viscous moduli (Gâ³), as well as a homogeneous distribution of proteins and polysaccharides. The viscosupplementation fluid improved the bioadhesive properties of the SF, and the use of the viscosupplementation fluid in conjunction with PT was found to be favorable for the distribution of macromolecules and phospholipids, contributing to the lubrication process and the treatment of OA-affected joints.
RESUMO
The importance of Saccharomyces cerevisiae yeast cells is known worldwide, as they are the most used microorganisms in biotechnology for bioethanol and biofuel production. Also, they are analyzed and studied for their similar internal biochemical processes to human cells, for a better understanding of cell aging and response to cell stressors. The special ability of S. cerevisiae cells to develop in both aerobic and anaerobic conditions makes this microorganism a viable model to study the transformations and the way in which cellular metabolism is directed to face the stress conditions due to environmental changes. Thus, this review will emphasize the effects of oxidative, ethanol, and osmotic stress and also the physiological and genetic response of stress mitigation in yeast cells.
RESUMO
Fumaric, malic and succinic acids have been selectively separated by facilitated pertraction with Amberlite LA-2, using n-heptane as liquid membrane. The feed phase consisted on viscous aqueous solution with similar mixture of carboxylic acids and viscosity as those of Rhizopus oryzae fermentation broth. Due to the differences between the acidities and molecule size of these acids, it is possible to selectively recover fumaric acid from the initial solution. The pH-gradient between the feed and stripping phases, as well as carrier concentration in the liquid membrane represent the main process parameters influencing the pertraction selectivity. Among them, Amberlite LA-2 concentration exhibits the most important control on the selectivity factor S, the maximum value of S being reached for carrier concentration of 30 g/l. The increase of feed phase viscosity amplified the magnitude of these influences on pertraction selectivity, due to the hindrance of acids diffusion towards the region where their reaction with Amberlite LA-2 occurs, effect more important for malic acid. Therefore, by modifying the viscosity from 1 to 24 cP, the maximum value of selectivity factor was increased from 12 to 18.8.
Assuntos
Ácidos Dicarboxílicos , Rhizopus oryzae , Fermentação , Aminas , Ácidos , FumaratosRESUMO
Folic acid (vitamin B9) is an essential micronutrient for human health. It can be obtained using different biological pathways as a competitive option for chemical synthesis, but the price of its separation is the key obstacle preventing the implementation of biological methods on a broad scale. Published studies have confirmed that ionic liquids can be used to separate organic compounds. In this article, we investigated folic acid separation by analyzing 5 ionic liquids (CYPHOS IL103, CYPHOS IL104, [HMIM][PF6], [BMIM][PF6], [OMIM][PF6]) and 3 organic solvents (heptane, chloroform, and octanol) as the extraction medium. The best obtained results indicated that ionic liquids are potentially valuable for the recovery of vitamin B9 from diluted aqueous solutions as fermentation broths; the efficiency of the process reached 99.56% for 120 g/L CYPHOS IL103 dissolved in heptane and pH 4 of the aqueous folic acid solution. Artificial Neural Networks (ANNs) were combined with Grey Wolf Optimizer (GWO) for modelling the process, considering its characteristics.
RESUMO
Fumaric, malic, and succinic acids have been selectively separated from their mixture obtained by Rhizopus oryzae fermentation using reactive extraction with Amberlite LA-2 dissolved in three solvents with different dielectric constants (n-heptane, n-butyl acetate, and dichloromethane). This technique allows recovering preferentially fumaric acid from the mixture, the raffinate containing only malic and succinic acids. The extractant concentration and organic phase polarity control the efficiency and selectivity of acids extraction. The increase of aqueous phase viscosity reduces the extraction yield for all studied acids, but exhibits a positively effect on separation selectivity. By using Amberlite LA-2 concentration equal to that stoichiometrically required for interfacial reaction with fumaric acid and mixing intensity which does not allow higher diffusion rates for larger molecules (malic and succinic acids), the maximum value of fumaric acid extraction rate exceeds 90%, while the selectivity factor value becomes 20. Regardless of the extraction system, the complete separation of fumaric acid from their mixture is possible by multi-stage extraction process, adjusting the extractant concentration in each stage. At higher values of aqueous phase viscosity, more extraction stages are required, while the increase of solvent polarity reduce the required number of stages for total recovery of fumaric acid.
Assuntos
Fracionamento Químico/métodos , Ácidos Dicarboxílicos/isolamento & purificação , Ácidos Dicarboxílicos/metabolismo , Extração Líquido-Líquido/métodos , Rhizopus oryzae/metabolismo , Acetatos , Aminas , Fermentação , Fumaratos/isolamento & purificação , Fumaratos/metabolismo , Heptanos , Cloreto de Metileno , Solventes , Ácido Succínico/isolamento & purificação , Ácido Succínico/metabolismo , Viscosidade , ÁguaRESUMO
Experimental studies on the reactive extraction of fumaric acid with Amberlite LA-2 from Rhizopus oryzae suspensions using three solvents with different dielectric constants varying from 9.08 to 1.90 (dichloromethane, n-butyl acetate, and n-heptane, respectively) underlined the particular behavior of the extraction system in the presence of fungal biomass. The interfacial mass flow of the reaction product was found to be significantly affected by the biomass, due mainly to its adsorption onto the phase separation interface, this leading to the appearance of a physical barrier against the solute's transfer. However, the magnitude of the adsorption phenomenon was found to depend on Rhizopus oryzae's affinity for the solvent phase, which increased significantly from dichloromethane to n-heptane. The negative influence of the biomass on the interfacial mass transfer can be partially counteracted by adding 1-octanol into the organic phase, improving the solvent's ability to solve the fumaric acid-Amberlite LA-2 complex and simplifying the reactive extraction mechanism, effects that were found to be more important for low-polar solvents. Consequently, for the same mixing intensity, the maximum amplification factor was reached for n-heptane, its value being almost 5-6 times higher than that obtained for dichloromethane and over 2 times higher than that obtained with n-butyl acetate.
Assuntos
Fumaratos , Rhizopus oryzae , FermentaçãoRESUMO
Combining artificial neural networks with evolutive/bioinspired approaches is a technique that can solve a variety of issues regarding the topology determination and training for neural networks or for process optimization. In this chapter, the main mechanisms used in neuroevolution are discussed and some biochemical separation examples are given to underline the efficiency of these tools. For the current case studies (reactive extraction of folic acid and pertraction of vitamin C), the bioinspired metaheuristic included in the neuroevolutive procedures is represented by Differential Evolution, an algorithm that has shown a great potential to solve a variety of problems from multiple domains.
Assuntos
Fenômenos Bioquímicos/fisiologia , Redes Neurais de Computação , Algoritmos , Animais , HumanosRESUMO
The addition of n-dodecane (between 1-3%) to the Escherichia coli fermentation broth in a mechanically agitated and aerated bioreactor revealed improved DO (dissolved oxygen) levels induced during fermentation which lead to an increase in biomass productivity and faster glucose consumption. The maximum values for enzyme activity (increased with 43% compared with the control) and k L a (the volumetric mass transfer coefficient) were obtained for the addition of 2% v/v n-dodecane in the bioreactor, due to the fact that oxygen limitation during the exponential growth phase of the bacterium can repress ß-galactosidase production. The oxygen vector addition increased the available dissolved oxygen and activated a redox-sensitive regulation and an elevated intracellular oxidative metabolism that lead to the enhancement in E. coli biomass accumulation and a more accurate protein folding of ß-galactosidase that would increase its activity. In addition to the experimental analysis, a complex model, developed using an improved version of Bacterial Foraging Algorithm and Artificial Neural Networks, was proposed, with a good average absolute value (6.2% in the training phase and 7.28% in the testing phase) between the process dynamic and the predictions generated by the model.
RESUMO
Mupirocin is an antibiotic from monocarboxylic acid class used as antibacterial agent against methicillin-resistant Staphylococcus aureus (MRSA) and can be obtained as a mixture of four pseudomonic acids by Pseudomonas fluorescens biosynthesis. Nowadays improving antibiotics occupies an important place in the pharmaceutical industry as more and more resistant microorganisms are developing. Mupirocin is used to control the MRSA outbreaks, for infections of soft tissue or skin and for nasal decolonization. Due to its wide use without prescription, the microorganism's resistance to Mupirocin increased from up to 81%, thus becoming imperative its control or improvement. As the biotechnological production of Mupirocin has not been previously reviewed, in the present paper we summarize some consideration on the biochemical process for the production of pseudomonic acids (submerged fermentation and product recovery). Different strains of Pseudomonas, different culture medium and different conditions for the fermentation were analysed related to the antibiotics yield and the product recovery step is analysed in relation to the final purity. However, many challenges have to be overcome in order to obtain pseudomonic acid new versions with better properties related to antibacterial activity.
Assuntos
Antibacterianos/biossíntese , Antibacterianos/farmacologia , Staphylococcus aureus Resistente à Meticilina/efeitos dos fármacos , Mupirocina/biossíntese , Mupirocina/farmacologia , Pseudomonas fluorescens/metabolismo , Infecções Estafilocócicas/tratamento farmacológico , Portador Sadio/tratamento farmacológico , Portador Sadio/microbiologia , Farmacorresistência Bacteriana , Fermentação , Humanos , Infecções dos Tecidos Moles/tratamento farmacológico , Infecções dos Tecidos Moles/microbiologia , Infecções Estafilocócicas/microbiologia , Infecções Cutâneas Estafilocócicas/tratamento farmacológico , Infecções Cutâneas Estafilocócicas/microbiologia , Tecnologia Farmacêutica/métodosRESUMO
Fumaric acid is a valuable compound used in foods, beverages, detergents, animal feed, pharmaceuticals and miscellaneous industrial products. It is produced on a large scale by the petrochemical route but the current tendency is towards implementing "green production" and environmental friendly technologies like biotechnological production of fumaric acid using low-cost raw materials. In this context, numerous studies focus on improving the fermentation process not only by using renewable raw material and genetically modified microorganisms, but also by developing and applying different downstream techniques for easy recovery of fumaric acid from the fermented broth. This review presents the main methods for production and separation of fumaric acid, highlighting the advantages and disadvantages of these and the potential economic impact in industry.
Assuntos
Biotecnologia/métodos , Fumaratos , Microrganismos Geneticamente Modificados , Biotecnologia/tendências , Fumaratos/química , Fumaratos/isolamento & purificação , Fumaratos/metabolismo , Microrganismos Geneticamente Modificados/química , Microrganismos Geneticamente Modificados/genética , Microrganismos Geneticamente Modificados/metabolismoRESUMO
The effects of external and internal diffusions of pyridine on its biodegradation rate in a bioreactor with a stationary basket bed of immobilized Bacillus spp. cells have been investigated for various biocatalyst diameters and thicknesses of the basket bed, considering the adapted Haldane kinetic model for substrate inhibition. Due to the very low values of pyridine mass flow inside the biocatalyst particles, the 'biological inactive region' appeared mainly near the particles' centre. This region is extended up to 38.5% from the overall volume of each studied size of the biocatalysts, increasing at higher biocatalyst size and basket bed width. Compared to the system containing free Bacillus spp. cells, the basket configuration of packed bed led to the reduction of biodegradation rate up to 82 times, similar to the mobile bed or column packed bed. The cumulated analysis of the influences of the studied factors allowed concluding that the optimum diameter of biocatalysts is 3â mm.
Assuntos
Bacillus/metabolismo , Biodegradação Ambiental , Reatores Biológicos/microbiologia , Piridinas/metabolismo , Poluentes Químicos da Água/metabolismo , Piridinas/análise , Poluentes Químicos da Água/análiseRESUMO
This paper is dedicated to the study on external and internal mass transfers of glucose for succinic fermentation under substrate and product inhibitions using a bioreactor with a stationary basket bed of immobilized Actinobacillus succinogenes cells. By means of the substrate mass balance for a single particle of biocatalysts, considering the Jerusalimsky kinetic model including both inhibitory effects, specific mathematical expressions have been developed for describing the profiles of the substrate concentrations and mass flows in the outer and inner regions of biocatalyst particles, as well as for estimating the influence of internal diffusion on glucose consumption rate. The results indicated that very low values of internal mass flow could be reached in the particles center. The corresponding region was considered biologically inactive, with its extent varying from 0.24% to 44% from the overall volume of each biocatalyst. By immobilization of bacterial cells and use of a basket bed, the rate of glucose consumption is reduced up to 200 times compared with the succinic fermentation system containing free cells.
Assuntos
Actinobacillus/metabolismo , Reatores Biológicos/microbiologia , Células Imobilizadas/metabolismo , Ácido Succínico/metabolismo , Alginatos , Fermentação , Glucose/metabolismo , Ácido Glucurônico , Ácidos Hexurônicos , CinéticaRESUMO
The study is focused on the external and internal mass transfers of lipids during their biodegradation process in a bioreactor with stationary basket bed of immobilized Bacillus spp. cells. By means of the lipid mass balance for a single particle of biocatalyst, considering the kinetic model adapted for the immobilized bacterial cells, specific mathematical models have been developed to estimate their mass flows in the liquid boundary layer surrounding the particle and inside the particle. The values of mass flows are significantly influenced by the internal diffusion velocity of lipids and the rate of their consumption, but also by the position inside the basket bed. These influences accumulated led to the appearance of a biological inactive region near the particle centre, its magnitude varying from 1.3 to 49.4% of the overall volume of particles.
Assuntos
Bacillus/citologia , Reatores Biológicos/microbiologia , Lipídeos/isolamento & purificação , Óleos de Plantas/química , Eliminação de Resíduos Líquidos , Purificação da Água/instrumentação , Purificação da Água/métodos , Biodegradação Ambiental , Células Imobilizadas , Difusão , Resíduos Industriais/análise , Azeite de Oliva , ReologiaRESUMO
This paper is dedicated to the study on the external and internal mass transfers of glucose for succinic acid fermentation under substrate and product inhibitions using a bioreactor with stirred bed of immobilized Actinobacillus succinogenes cells. By means of the substrate mass balance for a single particle of biocatalysts, considering the kinetic model adapted for both inhibitory effects, specific mathematical models were developed for describing the profiles of the substrate concentration in the outer and inner regions of biocatalysts and for estimating the substrate mass flows in the liquid boundary layer surrounding the particle and inside the particle. The values of the mass flows were significantly influenced by the internal diffusion velocity and rate of the biochemical reaction of substrate consumption. These cumulated influences led to the appearance of a biological inactive region near the particle center, its magnitude varying from 0 to 5.3% of the overall volume of particles.
Assuntos
Actinobacillus/metabolismo , Glucose/metabolismo , Ácido Succínico/metabolismo , Actinobacillus/química , Reatores Biológicos/microbiologia , Células Imobilizadas/química , Células Imobilizadas/metabolismo , Fermentação , Glucose/química , Cinética , Modelos Teóricos , Ácido Succínico/químicaRESUMO
Study of the distribution of the oxygen mass transfer coefficient, k (l) a, for a stirred bioreactor and simulated (pseudoplastic solutions of carboxymethylcellulose sodium salt) bacterial (P. shermanii), yeast (S. cerevisiae), and fungal (P. chrysogenum free mycelia) broths indicated significant variation of transfer rate with bioreactor height. The magnitude of the influence of the considered factors differed from one region to another. As a consequence of cell adsorption to bubble surface, the results indicated the impossibility of achieving a uniform oxygen transfer rate throughout the whole bulk of the microbial broth, even when respecting the conditions for uniform mixing. Owing to the different affinity of biomass for bubble surface, the positive influence of power input on k (l) a is more important for fungal broths, while increasing aeration is favorable only for simulated, bacterial and yeast broths. The influence of the considered factors on k (l) a were included in mathematical correlations established based on experimental data. For all considered positions, the proposed equations for real broths have the general expression [Formula in text] exhibiting good agreement with experimental results (with maximum deviations of ± 10.7% for simulated broths, ± 8.4% for P. shermanii, ± 9.3% for S. cerevisiae, and ± 6.6% for P. chrysogenum).
Assuntos
Reatores Biológicos/microbiologia , Fermentação , Oxigênio/metabolismo , Bactérias/metabolismo , Biomassa , Meios de Cultura , Penicillium chrysogenum/metabolismo , Propionibacterium/metabolismo , Saccharomyces cerevisiae/metabolismoRESUMO
The study on mixing distribution for an aerobic stirred bioreactor and simulated (solutions of carboxymethylcellulose sodium salt), yeasts (S. cerevisiae) and fungus (P. chrysogenum pellets and free mycelia) broths indicated the significant variation of mixing time on the bioreactor height. The experiments suggested the possibility to reach a uniform mixing in whole bulk of the real broths for a certain value of rotation speed or biomass concentration domain. For S. cerevisiae broths the optimum rotation speed increased to 500 rpm with the biomass accumulation from 40 to 150 g/l d.w. Irrespective of their morphology, for fungus cultures the existence of optimum rotation speed (500 rpm) has been recorded only for biomass concentration below 24 g/l d.w. The influence of aeration rate depends on the apparent viscosity/biomass concentration and on the impellers and sparger positions. By increasing the apparent viscosity for simulated broths, or biomass amount for real broths, the shape of the curves describing the mixing time variation is significantly changed for all the considered positions. The intensification of the aeration induced the increase of mixing time, which reached a maximum value, decreasing then, due to the flooding phenomena. This variation became more pronounced at higher viscosities for simulated broths, at higher yeasts concentration, and at lower pellets or filamentous fungus concentration, respectively. By means of the experimental data and using MATLAB software, some mathematical correlations for mixing time have been proposed for each broth and considered position inside the bioreactor. These equations offer a good agreement with the experiment, the maximum deviation being +/-7.3% for S. cerevisiae broths.
Assuntos
Reatores Biológicos/microbiologia , Reatores Biológicos/normas , Microbiologia Industrial/métodos , Penicillium chrysogenum/crescimento & desenvolvimento , Saccharomyces cerevisiae/crescimento & desenvolvimento , Aerobiose , Computação Matemática , SoftwareRESUMO
The previous works on simulated broths are continued and developed for Propionibacterium shermanii broths. The obtained results indicated the considerable increase of kLa in presence of n-dodecane as oxygen-vector and the existence of a certain value of hydrocarbon concentration that corresponds to the maximum mass transfer rate of oxygen. The magnitude of the positive effect of the oxygen-vector strongly depends on operational conditions of the bioreactor, on broth characteristics and on P. shermanii concentration.
Assuntos
Reatores Biológicos/microbiologia , Modelos Teóricos , Oxigênio/metabolismo , Propionibacterium/crescimento & desenvolvimento , Pressão ParcialRESUMO
Oxygen mass transfer represents the most important parameter involved in the design and operation of mixing-sparging equipment for bioreactors. It can be described and analyzed by means of the mass transfer coefficient, k(L) a. The k(L) a values are affected by many factors such as geometrical and operational characteristics of the vessels, media composition, type, concentration and microorganism morphology, and biocatalysts properties. The efficiency of oxygen transfer could be enhanced by adding oxygen-vectors in broths, such as hydrocarbons or fluorocarbons, without increasing the energy consumption for mixing or aeration. The experimental results obtained for simulated broths indicated a considerable increase of k(L) a in the presence of n-dodecane, and the existence of a certain value of n-dodecane concentration that corresponds to a maximum mass transfer rate of oxygen. The magnitude of the positive effect of n-dodecane depends both on the broths' characteristics and operational conditions of the bioreactor.