Ionic Exchange Resins and Hydrogels for Capturing Metal Ions in Selected Sweet Dessert Wines.

Samples of sweet and dessert wines, Vin Santo (VSR) from Malvasia grapes, and Granello (GR) from Sauvignon grapes were collected and analyzed for the content of selected macro- and micro-nutrients (Na, K, Mg, Ca, Mn, Fe, Cu and Zn) and of Pb. GR wines had low levels for Fe, Cu and Zn, when compared to VSR and in particular Zn was two orders of magnitude lower. Methods to decrease the content of Zn and Cu in VSR, as well as those for reducing, at the same time, the concentrations of Ca, Mg and K in both VSR and GR, to avoid the formation of opalescence and depots of metal tartrates, were studied. Synthetic hydrogels containing l-histidine residue were tested. The overall relative lowering effects were by ca 4, 23, and 12% for K, Mg and Ca contents, and ca 6, 27 and 10%, for Mn, Cu and Zn contents, in GR wine samples. Commercial ion exchange resin Lanxess Lewatit L-207 and L-208 were then assayed, being legally allowed in the agro-food industry. The L-207 resin revealed great lowering effects on the concentrations of Mn, Cu and Zn, being 75, 91 and 97%, respectively, in VSR wines and 77, 76 and 92%, respectively, in GR wines. The content of Zn was reduced from 49.3 ± 1.2 mg/L in the original wine, down to 1.1 ± 0.1 mg/L, within 48 h soaking. The effects on the character of the dessert wines by the resin L-207 was also taken under control, measuring pH and color index. The color index changed by ca 15% and pH by ca 6% upon treatment of VSR wine with L-207 resins (48 h).

Antibacterial Properties of Silver Nanoparticles Embedded on Polyelectrolyte Hydrogels Based on α-Amino Acid Residues.

Polyelectrolyte hydrogels bearing l-phenylalanine (PHE), l-valine (AVA), and l-histidine (Hist) residues were used as scaffolds for the formation of silver nanoparticles by reduction of Ag⁺ ions with NaBH4. The interaction with the metal ion allowed a prompt collapse of the swollen hydrogel, due to the neutralization reaction of basic groups present on the polymer. The imidazole nitrogen of the hydrogel with Hist demonstrated greater complexing capacity with the Ag⁺ ion compared to the hydrogels with carboxyl groups. The subsequent reduction to metallic silver allowed for the restoration of the hydrogel's degree of swelling to the starting value. Transmission electron microscopy (TEM) and spectroscopic analyses showed, respectively, a uniform distribution of the 15 nm spherical silver nanoparticles embedded on the hydrogel and peak optical properties around a wavelength of 400 nm due to the surface plasmonic effect. Unlike native hydrogels, the composite hydrogels containing silver nanoparticles showed good antibacterial activity as gram+/gram- bactericides, and higher antifungal activity against S. cerevisiae.

Polyelectrolyte Hydrogel Platforms for the Delivery of Antidepressant Drugs.

Some vinyl hydrogels containing α-amino acid residues (l-phenylalanine, l-valine) were used as polyelectrolyte platforms for the evaluation of the controlled release of two antidepressants (paroxetine and duloxetine). The closer acidity constant (pKa) values of the two drugs show a closer release profile in physiological phosphate buffered saline (PBS) buffer (pH 7.40) and for long periods of time. The great electrostatic interaction forces between the COO- group of the hydrogel and the protonated secondary amino nitrogen of the drug are the main factor improving the release kinetics; this release was found to be slower compared to that of two structurally related drugs bearing the tertiary amino nitrogen atom (citalopram and trazodone). Moreover, at the lower value of pH 4.60, paroxetine showed a flatter release profile from the hydrogel containing the l-phenylalanine residues that, after six days, is half of that shown by duloxetine. Further effects due to steric and hydrophobic interactions may contribute to the different release profile. A further stimulation with alternating magnetic fields (AMF) of low frequency (20 kHz/50 W) enhanced the release of the drug at pH 7.40 from the hydrogel containing magnetic nanoparticles. Both AMF and PBS solution at pH 7.40 were used to trigger the 'on-demand' pulsatile paroxetine release from the nanocomposite hydrogel.

Long-term doxorubicin release from multiple stimuli-responsive hydrogels based on α-amino-acid residues.

We have developed a series of pH- and temperature-stimuli-sensitive vinyl hydrogels, bearing α-amino acid residues (L-phenylalanine, L-valine) and incorporating magnetic nanoparticles of different chemical compositions (CoFe2O4 and Fe3O4). The goal was to study the potential applications of these nanocomposites in the controlled release of doxorubicin (DOXO), a potent anticancer drug. The strength of the electrostatic interaction between the protonated nitrogen of the DOXO molecule and the ionized carboxylic groups of the hydrogel allowed effective control of the drug release rate in saline solutions. The embedded magnetic nanoparticles were an additional remote control of the drug release under the stimulus of an appropriate external alternating magnetic field (AMF). Data showed that the controlled release of DOXO proceeded for months and followed a diffusion-controlled release mechanism, while maintaining the amount of released drug within acceptable therapeutic windows. The amount of the released DOXO was found in all cases substantially higher than the "control" because the application of the AMF augments in stimulating the nanoparticles within the DOXO-loaded hydrogel. In vitro experiments have shown that the released DOXO is able to induce cell death to cervix adenocarcinoma cells (HeLa cells).

Biohydrogels with magnetic nanoparticles as crosslinker: characteristics and potential use for controlled antitumor drug-delivery.

Hybrid magnetic hydrogels are of interest for applications in biomedical science as controlled drug-delivery systems. We have developed a strategy to obtain novel hybrid hydrogels with magnetic nanoparticles (NPs) of CoFe(2)O(3) and Fe(3)O(4) as crosslinker agents of carboxymethylcellulose (CMC) or hyaluronic acid (HYAL) polymers and we have tested these systems for controlled doxorubicin release. The magnetic NPs are functionalized with (3-aminopropyl)trimethoxysilane (APTMS) in order to introduce amino groups on the surface. The amino coating is determined and quantified by standard Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy methods, and by cyclic voltammetry, a novel approach that permits us to look at the solution properties of the functionalized NPs. The gel formation involves the creation of an amide bond between the carboxylic groups of CMC or HYAL and the amine groups of functionalized NPs, which work as crosslinking agents of the polymer chains. The hybrid hydrogels are chemically and morphologically characterized. The rheological and the water uptake properties of the hydrogels are also investigated. Under the application of an alternating magnetic field, the CMC-HYAL hybrid hydrogel previously loaded with doxorubicin shows a drug release greater than that showed by the CMC-HYAL hydrogel crosslinked with 1,3-diaminopropane. In conclusion, the presence of magnetic NPs makes the synthesized hybrid hydrogels suitable for application as a drug-delivery system by means of alternating magnetic fields.

Stimuli-responsive hydrogels for controlled pilocarpine ocular delivery.

A series of vinyl hydrogels containing α-aminoacid (L-histidine, L-valine) residues was synthesized and their swelling properties evaluated at different pHs and temperatures. Unlike the zwitterionic compound containing only the l-histidine, a dual-stimuli responsiveness was improved in the carboxyl acid hydrogels carrying the l-valine residues (HVa). Besides the COOH functionality, the presence of either isopropyl and amido groups in the monomer structure renders the hydrogel also temperature-responsive, in a similar manner as the well-known poly(N-isopropylacrylamide) (pNIPAAm). The three HVa hydrogels (cross-linked with 1, 2, and 5 mol% of N,N'-ethylene-bisacrylamide, EBA) show a phase separation at the same critical pH4, although a different swelling was improved by the amount of EBA. In buffered solutions, the effect of increasing temperature led to decrease the swelling and, as the pH is close to the critical one, a further and sharper collapse of the hydrogel may be tuned. The release study of pilocarpine in physiological conditions showed a burst effect within the first few hours, followed by a sustained release for a week. The initial burst effect was strongly dependent on the kind of hydrogel investigated. As the pilocarpine is a basic molecule (pK(a)7.2), it may interact more strongly with the free carboxyl groups in the ionized state of the HVa hydrogels than the zwitterionic species of the histidine compounds. The releasing profile shows a three time greater release of the pilocarpine loaded in the HVa hydrogels. The hydrogels were found to be non-toxic against the mouse fibroblast NIH3T3 cells. The presence of pilocarpine strongly increased the cell proliferation even after 2 days.

Hydrogel containing L-valine residues as a platform for cisplatin chemotherapy.

Two acrylic hydrogels, of low cross-linking content and carrying the L-valine residues, were synthesized and studied as a platform to load and release the chemotherapeutic agent cisplatin. The platinum(II)-complex species showed a well-defined stoichiometric ratio in which two carboxylate groups of the collapsing gel coordinate a metal center; this was confirmed by FT-IR spectra. When loaded in water, a zero-order release rate of platinum(II)-species was shown in the physiologic solution (PBS, pH 7.40) for more than one week. Moreover, the amount of platinum(II)-species released from the hydrogel may be improved either by the cross-linking degree and by the temperature. Any increase of the cross-links results in a decreased slope of the straightline Pt(II)/gel (mg/g) versus time, whereas the increasing temperature results in a greater amount of platinum(II)-species in solution. The chemical- and swelling-controlled release are the main mechanisms supervising the whole release process. On the other hand, the loading of cisplatin and temsirolimus in DMF showed a characteristic two phase releasing pattern; the initial burst effect was always followed by the zero-order release rate for a week. In this case only a swelling-controlled mechanism was mainly invoked. The cytotoxic activity towards Me665/2/21 human melanoma cell line, afforded by the cisplatin-loaded hydrogel, was close and in some cases higher compared to the native cisplatin at the same concentration; an interesting synergy in term of cytotoxicity was observed when a combined treatment of temsirolimus and cisplatin was used, although temsirolimus exerted only a moderate inhibition of cell proliferation.

New platinum-oxicam complexes as anti-cancer drugs. Synthesis, characterization, release studies from smart hydrogels, evaluation of reactivity with selected proteins and cytotoxic activity in vitro.

The reaction of aqueous cis-[Pt(NH(3))(2)(H(2)O)(2)](NO(3))(2) with Na(+)HMEL(-) (H(2)MEL, meloxicam, 4-hydroxy-2-methyl-N-(5-methyl-1,3-thiazol-2-yl)-2H-1,2-benzothiazine-3-carboxamide-1,1-dioxide), and Na(+)HISO(-) (H(2)ISO, isoxicam, 4-hydroxy-2-methyl-N-(5-methylisoxazol-3-yl)-2H-1,2-benzothiazine-3-carboxamide-1,1-dioxide) at pH 7 produced micro-crystalline cis-[Pt(NH(3))(2)(N(1')-HMEL)(2)], 5 and cis-[Pt(NH(3))(2)(N(1')-HISO)(2)], 6. The X-ray diffraction structure of 5 shows two HMEL(-) anions donating through the thiazole nitrogen atoms and adopting a head-to-tail (HT) conformation. The (1)H NMR spectrum for 5 from DMSO-d(6) shows inertness of the complex up to at least 24h. Delivery studies for 5 and 6 from vinyl hydrogel based on L-phenylalanine (pH 6.5, 25 degrees C) show that concentrations of complexes ranging between 2.5 and 5 microM can be reached after a day. Compounds 5 and 6 show strong anti-proliferative effects on CH1 cells (ovarian carcinoma, human) in vitro, IC(50) values being 0.60 and 0.37 microM, respectively (0.16 microM for reference, cis-diamminodichloridoplatinum(II), cisplatin). ESI-MS measurements clearly documented that both 5 and 6 form adducts with the three model proteins ubiquitin (UBI), cytochrome c (CYT C) and superoxide dismutase (SOD), the HISO(-) complex being significantly more effective than the HMEL(-) one. Density functional methods help in finding rationale for the easiest dissociation of Pt-H(2)ISO/HISO bonds when compared to the Pt-N(1)(')-H(2)MEL/N(1)(')-HMEL linkages.

Cisplatin/hydrogel complex in cancer therapy.

Hydrogels containing alpha-amino acid residues (L-phenylalanine, L-histidine) were used to complex the chemotherapeutic agent cisplatin. The release of the drug in phosphate buffer solution showed an initial burst effect, followed by a near zero-order release phase over the seven days of reported period. Unlike the nonreleasing pattern of the hydrogel poly(N-acryloyl-L-phenylalanine-co-N-isopropylacrylamide) (CP2), the homopolymer poly(N-acryloyl-L-phenylalanine) (P9) hydrogel showed a released amount of cisplatin loaded from a water/DMSO mixture that was three times greater than that loaded from simple water. The hydrogel P9 formed with cisplatinum(II) complex species of well-defined stoichiometry; the drug species was released by a chemically controlled process. The Pt(II)/L (L is the monomeric unit of the polymer) stoichiometric molar ratio of 0.5, corresponding to two close carboxylate groups per Pt(II), was found by the viscometric data on the soluble polymer analogue. The platinum species released from cisplatin-loaded (from water) hydrogel retained its cytotoxic activity toward Me665/2/21 human melanoma cell line, in the same manner shown by the native cisplatin. On the contrary, the platinum species released from cisplatin-loaded (from water/DMSO) hydrogel was devoid of any cytotoxic effect.

Release studies from smart hydrogels as carriers for piroxicam and copper(II)-oxicam complexes as anti-inflammatory and anti-cancer drugs. X-ray structures of new copper(II)-piroxicam and -isoxicam complex molecules.

Piroxicam H(2)PIR (H(2)PIR, 4-hydroxy-2-methyl-N-pyridin-2-yl-2H-1,2-benzothiazine-3-carboxamide 1,1-dioxide), [Cu(HPIR)(2)(H(2)O)(2)] previously prepared and tested from this laboratory and at National Institute of Health, National Cancer Institute, Developmental Therapeutic Program, NIH-NCI-DTP, USA [R. Cini, G. Tamasi, S. Defazio, M.B. Hursthouse, J. Inorg. Biochem. 101 (2007) 1140-1152, and references cited therein], [Cu(HMEL)(2)(DMF)] (H(2)MEL, 4-hydroxy-2-methyl-N-(5-methyl-1,3-thiazol-2-yl)-2H-1,2-benzothiazine-3-carboxamide 1,1-dioxide; DMF, N,N-dimethylformamide), [Cu(HISO)(2)] (H(2)ISO, 4-hydroxy-2-methyl-N-(5-methylisoxazol-3-yl)-2H-1,2-benzothiazine-3-carboxamide 1,1-dioxide), and [Cu(HTEN)(2)(H(2)O)(2)] (H(2)TEN, 4-hydroxy-2-methyl-N-pyridin-2-yl-2H-thieno[2,3-e][1,2]thiazine-3-carboxamide 1,1-dioxide), were loaded on CMH2 hydrogel (co-1:10-poly(N-methacryloyl-L-histidine-co-N-isopropylacrylamide) cross-linked with N,N'-ethylene-bis-acrylamide (EBA) 2%) and the kinetics of release of Cu-HPIR species in several media were studied. The release of Cu(HPIR)(2) in DMSO from CMH2 hydrogel after swelling and loading from DMSO followed a diffusion controlled process. The release of Cu(HPIR)/Cu(HPIR)(2) from dried CMH2 hydrogel after swelling and loading from THF solution, then soaking into water/DMSO 95:5 v/v (pH 5.6) followed a relaxation controlled and diffusion controlled mechanism. The amount of Cu(HPIR)(2) released in the medium reached 0.03 microg Cu/mg gel/mL, i.e. ca 0.8 microM within 48 h that compares well with the IC(50) values reported for metal based drugs like carboplatin (diammino(1,1-cyclobutandicarboxylato)platinum(II)) against certain human tumor cell lines. The release studies performed by monitoring both the absorbance values at 362 nm (sensitive to metal-bound HPIR(-)) and the content of Cu via AAS, showed an excellent agreement with the Cu(HPIR)(2) or Cu(HPIR)(2) stoichiometry, depending on the delivery medium. Corresponding studies were performed for other Cu(oxicam-H)(2) species in different delivery media.

Copolymers including L-histidine and hydrophobic moiety for preparation of nonbiofouling surface.

A new type of copolymer composed of l-histidine (ampholyte) and n-butyl methacrylate (hydrophobic moiety) was developed for the preparation of nonbiofouling surfaces. The copolymer adsorbed onto resin surfaces and made the surface very hydrophilic. The hydrophilization effect was higher than that of bovine serum albumin (BSA). When polystyrene surfaces were coated with the copolymer, both the nonspecific adsorption of protein and the adhesion of cells were significantly reduced in comparison with BSA coating. The newly synthesized polymer is a new and useful candidate for the preparation of nonbiofouling surfaces.

fac-{Ru(CO)3}2+-core complexes and design of metal-based drugs. synthesis, structure, and reactivity of Ru-thiazole derivative with serum proteins and absorption-release studies with acryloyl and silica hydrogels as carriers in physiological media.

The reaction of [Ru2(CO)6Cl4], 1, with excess THZ (1,3-thiazole) in absolute ethanol at 55 degrees C produces fac-[Ru(CO)3Cl2(THZ)], 2, in high yield. [Ru(CO)2Cl2(THZ)2], 3, is formed at higher temperature (ca 70 degrees C) and higher concentration of THZ. The X-ray structures of the new compounds have been determined, and density functional studies performed at the hybrid B3LYP/(Lanl2DZ, Ru; 6-311+G**, CHClNOS) level allowed the estimation of the structures of several conformers as well as that of their relative total electronic energies. Compound 2 is soluble (slowly) in aqueous media, where it reacts with the transport proteins bovine serum albumin (BSA) and human apotransferrin (HTF), and at a lower extent with calf thymus DNA (CT-DNA) and with guanosine-5'-monophosphate (GMP). The complex molecule is adsorbed by certain synthetic acryloyl polymers that have terminal carboxylate functions and is embedded in silica gels when these latter are prepared in the presence of a solution of 2. Ruthenium species are slowly released from the loaded gels into physiological solutions at pH 7.4. The reactivity of 2 with biomolecules and synthetic hydrogels makes it a compound of interest for anticancer and antimetastases tests.

Kinetic mechanism of the Zn-dependent aryl-phosphatase activity of myo-inositol-1-phosphatase.

Myo-inositol-1-phosphatase (EC 3.1.3.25) is able to hydrolyze myo-inositol-1-phosphate in the presence of Mg(2+) ions at neutral pH, and also p-nitrophenyl phosphate in the presence of Zn(2+)-ions at acidic pH. This enzyme plays a role in phosphatidylinositol cell signalling and is a putative target of lithium therapy in manic depression. We elucidate here the kinetic mechanism of the Zn-dependent activity of myo-inositol-1-phosphatase. As part of this analysis it was necessary to determine the basicity constants of p-nitrophenyl phosphate and the stability constant of its metal-complex in the presence of zinc chloride. We find that the Zn-dependent reaction may be described either by a rapid-equilibrium random mechanism or an ordered steady-state mechanism in which the substrate binds to the free enzyme prior to the metal ion. In both models the Zn-substrate complex acts as a high affinity inhibitor, yielding a dead-end species through its binding to the enzyme-Zn-substrate in rapid-equilibrium or to the enzyme-phosphate complexes in a steady-state model. Phosphate is a competitive inhibitor of the enzyme with respect to the substrate and an uncompetitive inhibitor with respect to zinc ions.

Novel therapeutic agents for bone resorption. Part 1. Synthesis and protonation thermodynamics of poly(amido-amine)s containing bis-phosphonate residues.

Two poly(amido-amine)s (oligoPAM and oligoNER) containing bis-phosphonate residues were obtained by a Michael-type polyaddition of pamidronate and neridronate to 1,4-bis(acryloyl)piperazine. The SEC (size-exclusion chromatography) and the MALDI-TOF (matrix assisted laser desorption ionization) analyses were consistent with the presence of oligomeric species (2-3 kDa) and with a narrow polydispersity index. The thermodynamic results (log Ks, -DeltaH(o) , and DeltaS(o) obtained at 25 degrees C in 0.15 M NaCl) of both the oligomers and the corresponding low molecular weight precursors were in line with a cluster structure formed during the protonation of the basic nitrogen in the pamidronate. The solubility of the oligoNER with a longer aliphatic chain was improved at high pHs, allowing the evaluation of their solution properties. Preliminary biological results show that both the oligomers do not negatively affect the in vitro viability, proliferation, and cellular activity of either normal animal or human osteoblasts.

Physicochemical and biopharmaceutical characterization of endo-2-(8-methyl-8-azabicyclo[3.2.1]oct-3-yl)-2,3-dihydro-1H-benz[e]isoindol-1-one (CR3124) a novel potent 5-HT3 receptor antagonist.

The physicochemical and biopharmaceutical properties, such as pK(a), crystal habit, water solubility, logD, molecular structure and dynamics, and membrane permeability of CR3124 (endo-2-(8-methyl-8-azabicyclo[3.2.1]oct-3-yl)-2,3-dihydro-1H-benz[e]isoindol-1-one, a novel potent 5-HT(3) receptor antagonist) have been studied in order to obtain preformulation information. The study showed that CR3124 is a very rigid molecule in which conformational freedom due to the presence of a rotatable bond is restricted by the interaction between an activated hydrogen and the amide oxygen and the conformation of the tropane piperidine ring is regulated by the environment in such a manner as to optimize the intermolecular interactions with the solvent. This chameleon behavior appears to be capable of explaining the biopharmaceutical properties showed by CR3124, such as low wettability, relatively good solubility, and very high membrane permeability.

Vinyl polymers based on L-histidine residues. Part 2. Swelling and electric behavior of smart poly(ampholyte) hydrogels for biomedical applications.

Hydrogels based on the uncharged N-isopropylacrylamide and the ionic ampholyte N-acryloyl-L-histidine showed a reversible multiple-responsive volume change and volume phase transition behavior in aqueous solution. The phase transition phenomenon was induced by the temperature, the pH, the salt-type concentration, and the electric potential. The kind of cation (Na+, K+, Cs+, Mg2+, Ca2+, Sr2+) and anion (Cl-, ClO4-, NO3-, SO4(2-)) strongly influenced the critical concentration that improved the phase separation of the gels. The volume of the collapsed gel can be hundred times smaller than that of the swollen one. The oscillatory swelling of the gels in response to temperature and pH (4 and 9) changes was fast and reversible, while the contractile behavior in the electric field showed response only at pH 9, i.e., when the amount of negative charges on the L-histidine residues predominated. The electrically induced anisotropic gel deswelling was attributed to the syneresis of water from the gel. The nontoxicity against the RAW264 cell line and the low osmotic pressure exhibited by the swollen gels make these compounds useful scaffolds for human organs. The ability to load and release an ionizable drug molecular model (ferulic acid) from the hydrogels was shown also at different pH values.

Drug-protein recognition processes investigated by NMR relaxation data. A study on corticosteroid-albumin interactions.

In this paper we investigated the interaction processes occurring at the protein-solvent interface for prednisolone-albumin and prednisone-albumin systems, using an approach based on the analysis of proton selective relaxation rate enhancements of the ligand in the presence of the macromolecule. The contribution from the bound ligand fraction to the observed relaxation rate in relation to protein concentration allowed the calculation of the affinity index[A]L(T) and the normalized affinity index [AI(N)]L(T) which removes the effects of motional anisotropies and different proton densities, and isolates the contribution due to a decrease in the ligand dynamics caused by the binding with the protein. This approach allowed the comparison of the binding ability of prednisolone and prednisone towards albumin.

Synthetic polymers as biomacromolecular models for studying ligand-protein interactions: a nuclear spin relaxation approach.

In this paper, we applied an NMR methodology based on the analysis of selective spin-lattice relaxation rate enhancements of ligand protons induced by interaction processes between prednisolone and a synthetic copolymer, namely poly(N-isopropylacrylamide-co-N-acryloil-L-phenylalanine), in order to investigate this system as a model for studying drug-biomacromolecules interactions. The contribution from the bound ligand fraction to the observed relaxation rate in relation to macromolecule concentration allowed the calculation of the normalized affinity index [A(N)(I)](T)(L), in which the effects of motional anisotropies and different proton densities have been removed. This parameter, which represents the global affinity of the ligand towards the macromolecule, isolates the contribution due to a decrease in the ligand dynamics caused by the binding with the copolymer. The affinity index calculated for prednisolone-copolymer complex compared to that obtained for prednisolone-albumin system, suggested that synthetic polymers as models of biomacromolecules can play an important role in drug-protein interaction studies.

Vinyl polymers based on L-histidine residues. Part 1. The thermodynamics of poly(ampholyte)s in the free and in the cross-linked gel form.

Amphiphilic vinyl polymers (in the free and cross-linked forms), carrying carboxyl and imidazole groups, were prepared by a radical polymerization of the purposely synthesized N-acryloyl-L-histidine. The protonation thermodynamic studies (at 25 degrees C in 0.15 M NaCl) showed high polyelectrolyte character of the soluble polymer. Unlike the linear decreasing trend of the basicity constant, over the whole range of alpha (degree of protonation), the enthalpy changes for the protonation of the imidazole nitrogen in the polymer showed a decreasing pattern only at alpha > 0.5. This was ascribed to the formation of hydrogen bonds between protonated and free neighboring monomer units. Viscometric data revealed a minimum hydrodynamic volume of the polymer at its isoelectric point (pH 5), whereas at higher or lower pHs, the macromolecule expanded greatly as a consequence of the charged sites formation. This produced a preferential solvation of the protonated imidazole and carboxylate ions, the latter being surrounded by more water molecules in the hydration shell. The peculiar hydration behavior was confirmed in the cross-linked polymer. The hydrogel showed an equilibrium degree of swelling (EDS), strongly dependent on pH, in a similar manner as viscometric data of the soluble polymer. A linear relationship between the reduced viscosity and the EDS was found. The polymer was non toxic against the RAW264 cell line.

Synthesis and characterization of a new benzofulvene polymer showing a thermoreversible polymerization behavior.

A new polymer based on a functionalized benzofulvene moiety has been synthesized by spontaneous polymerization of the monomer in the solid state. This polymer shows a very high molar mass, high solubility in the most common organic solvents, and thermoreversible polymerization properties. An interesting application in synthesis is reported.