Tailoring Auger Recombination Dynamics in CsPbI3 Perovskite Nanocrystals via Transition Metal Doping.

Auger recombination is a pivotal process for semiconductor nanocrystals (NCs), significantly affecting charge carrier generation and collection in optoelectronic devices. This process depends mainly on the NCs' electronic structures. In our study, we investigated Auger recombination dynamics in manganese (Mn2+)-doped CsPbI3 NCs using transient absorption (TA) spectroscopy combined with theoretical and experimental structural characterization. Our results show that Mn2+ doping accelerates Auger recombination, reducing the biexciton lifetime from 146 to 74 ps with increasing Mn doping concentration up to 10%. This accelerated Auger recombination in Mn-doped NCs is attributed to increased band edge wave function overlap of excitons and a larger density of final states of Auger recombination due to Mn orbital involvement. Moreover, Mn doping reduces the dielectric screening of the excitons, which also contributes to the accelerated Auger recombination. Our study demonstrates the potential of element doping to regulate Auger recombination rates by modifying the materials' electronic structure.

Nanotubes from Lanthanide-Based Misfit-Layered Compounds: Understanding the Growth, Thermodynamic, and Kinetic Stability Limits.

Gaining insights into the kinetics and the thermodynamic limits of nanostructures in high-temperature reactions is crucial for controlling their unique morphology, phase, and structure. Nanotubes from lanthanide-based misfit-layered compounds (MLCs) have been known for more than a decade and were successfully produced mostly via a chemical vapor transport protocol. The MLC nanotubes show diverse structural arrangements and lattice disorders, which could have a salient impact on their properties. Though their structure and charge transfer properties are reasonably well understood, a lack of information on their thermodynamic and kinetic stability limits their scalable synthesis and their applicability in modern technologies. In this study, the growth, thermodynamic stability, and decomposition kinetics of lanthanide-based misfit nanotubes of two model compounds, i.e., (LaS)1.14TaS2 and (SmS)1.19TaS2 are elucidated in detail. The nanotubes were carefully analyzed via atomic resolution electron microscopy imaging and synchrotron-based X-ray and electron diffraction techniques, and the information on their morphology, phase, and structures was deduced. The key insights gained would help to establish the parameters to explore their physio-chemical properties further. Furthermore, this study sheds light on the complex issue of the high-temperature stability of nanotubes and nanostructures in general.

Computational Investigation of LiF Formation at Graphite-Electrolyte Interfaces.

The performance of rechargeable batteries is strongly influenced by the solid-electrolyte interphase (SEI), and a comprehensive understanding of SEI formation from the atomic level is crucial for effective battery design. The dynamics of the electrode-electrolyte interface is important and needs to be considered when evaluating the mechanism of the SEI formation. Here, we employed ab initio molecular dynamics (AIMD) and density functional theory (DFT) calculations to examine interfacial behaviors and LiF formation. Through molecular dynamics and structure sampling, we successfully constructed an electrochemical stability diagram correlating the thermodynamic free energy with the potential, which is determined by the work function of electrode surfaces. DFT calculations revealed that LiF formation at the graphite-electrolyte interfaces occurs easily via the intermediate LiHF complex. Interestingly, LiF tends to be solvated by solvents rather than directly deposited onto electrode surfaces (e.g., the Au electrode), a phenomenon we identify as a critical determinant of the porous and uneven nature of the LiF layer observed on graphite electrodes. Our finding offers new mechanistic insights into LiF formation at graphite-electrolyte interfaces.

Colloidal Synthesis of (PbBr2)2(AMTP)2PbBr4 a Periodic Perovskite "Heterostructured" Nanocrystal.

Heterostructures in nanoparticles challenge our common understanding of interfaces due to quantum confinement and size effects, giving rise to synergistic properties. An alternating heterostructure in which multiple and reoccurring interfaces appear in a single nanocrystal is hypothesized to accentuate such properties. We present a colloidal synthesis for perovskite layered heterostructure nanoparticles with a (PbBr2)2(AMTP)2PbBr4 composition. By varying the synthetic parameters, such as synthesis temperature, solvent, and selection of precursors, we control particle size, shape, and product priority. The structures are validated by X-ray and electron diffraction techniques. The heterostructure nanoparticles' main optical feature is a broad emission peak, showing the same range of wavelengths compared to the bulk sample.

Giant In-Plane Flexoelectricity and Radial Polarization in Janus IV-VI Monolayers and Nanotubes.

Nanotubes have established a new paradigm in nanoscience because of their atomically thin geometries and intriguing properties. However, because of their typical metastability compared to their 2D and 3D counterparts, it is still fundamentally challenging to synthesize nanotubes with controlled size. New strategies have been suggested for synthesizing nanotubes with a controlled geometry. One of these is considering Janus 2D layers, which can self-roll to form a nanotube. Herein, we study 412 nanotubes (along the armchair and zigzag directions) based on 36 Janus IV-VI compounds using density functional theory (DFT) calculations. By investigating the energy-radius relationship using structural models and Bayesian predictions, the most stable nanotubes show negative strain energies and radii below 20 Å, where curvature effects can play a significant role. The band structures show that the selected nanotubes exhibit sizable band gaps and size-dependent electronic properties. More strikingly, the flexoelectricity along the in-plane directions and radial directions in these nanotubes is significantly larger than that in other nanotubes and their 2D counterparts. This work opens up an avenue of structure-property relationships of Janus IV-VI nanotubes and demonstrates giant flexoelectricity in these nanotubes for future electronic and energy applications.

How Does Local Strain Affect Stokes Shifts in Halide Double Perovskite Nanocrystals?

Lead-free perovskite nanocrystals are of interest due to their nontoxicity and potential application in the display industry. However, engineering their optical properties is nontrivial and demands an understanding of emission from both self-trapped and free excitons. Here, we focus on tuning silver-based double perovskite nanocrystals' optical properties via two iso-valent dopants, Bi and Sb. The photoluminescence quantum yield of the intrinsic Cs2Ag1-yNayInCl6 perovskite increased dramatically upon doping. However, the two dopants affect the optical properties very differently. We hypothesize that the differences arise from their differences in electronic level contributions and ionic sizes. This hypothesis is validated through absorption and temperature dependence photoluminescence measurements, namely, by employing the Huang-Rhys factor, which indicates the coupling of the exciton to the lattice environment. The larger ionic size of Bi also plays a role in inducing significant microstraining verified via synchrotron measurements. These differences make Bi more sensitive to doping concentration over antimony which displays brighter emission (QY ∼40%). Such understanding is important for engineering optical properties in double perovskites, especially in light of recent achievements in boosting the photoluminescence quantum yield.

Structural and electronic properties of double wall MoSTe nanotubes.

Janus nanotubes originating from rolling up asymmetric dichalcogenide monolayers have shown unique properties compared to their 2D and 3D counterparts. Most of the work on Janus nanotubes is focused on single-wall (SW) tubes. In this work, we have investigated the structural and electronic properties of double wall (DW) MoSTe nanotubes using Density Functional Theory (DFT). The most stable DW, corresponding to a minimum of the strain energy, is formed by combining 16- and 24-unit cells for the inner and outer tubes. This DW configuration shows a slightly smaller inner diameter than the SW tube, which was formed by 18-unit cells due to the intra-wall interaction. The investigation of the band gaps of 2D structures under strain and SW/DW nanotubes revealed that the curvature of the nanotube and the strain induced when forming the tube are the two primary factors enabling the band gap tuning. Moreover, we found that the band gaps of the DW MoSTe tubes close, compared to the SWs, generating tubes with a metallic-like behavior. This property makes DW MoSTe nanotubes promising for electrochemical applications.

Study of Optoelectronic Features in Polar and Nonpolar Polymorphs of the Oxynitride Tin-Based Semiconductor InSnO2N.

In view of its potential applicability in photoconversion processes, we here discuss the optoelectronic features of the recently proposed tin-based oxynitride material for (photo)catalysis, InSnO2N. In detail, by combining Density Functional and Many-Body Perturbation Theory, we compute the electronic and optical properties discussing how they vary from the nonpolar phase to the more stable polar one. After providing a detailed, unbiased, description of the optoelectronic features of the two phases, we have finally calculated the Spectroscopic Limited Maximum Efficiency and obtained data that further witness the relevance of InSnO2N for solar energy conversion processes.

Tailoring High-Entropy Oxides as Emerging Radiative Materials for Daytime Passive Cooling.

In the framework of intense research about high-entropy materials and their applications in energy-oriented technologies, in the present work, we discuss the potential applicability of selected oxides and of the alloys they form at different concentrations for daytime radiative cooling implementation. In particular, by combining density functional theory and the finite difference method, we provide an unbiased, scattering-free description of structural, electronic, and dynamic features of the best candidates, showing the required strong radiative properties for passive cooling while offering the benefits of affordability and compatibility with commercial coating fabrication processes.

Atomically engineered interfaces yield extraordinary electrostriction.

Electrostriction is a property of dielectric materials whereby an applied electric field induces a mechanical deformation proportional to the square of that field. The magnitude of the effect is usually minuscule (<10-19 m2 V-2 for simple oxides). However, symmetry-breaking phenomena at the interfaces can offer an efficient strategy for the design of new properties1,2. Here we report an engineered electrostrictive effect via the epitaxial deposition of alternating layers of Gd2O3-doped CeO2 and Er2O3-stabilized δ-Bi2O3 with atomically controlled interfaces on NdGaO3 substrates. The value of the electrostriction coefficient achieved is 2.38 × 10-14 m2 V-2, exceeding the best known relaxor ferroelectrics by three orders of magnitude. Our theoretical calculations indicate that this greatly enhanced electrostriction arises from coherent strain imparted by interfacial lattice discontinuity. These artificial heterostructures open a new avenue for the design and manipulation of electrostrictive materials and devices for nano/micro actuation and cutting-edge sensors.

Nanotubes from Ternary WS2(1-x)Se2x Alloys: Stoichiometry Modulated Tunable Optical Properties.

Nanotubes of transition metal dichalcogenides such as WS2 and MoS2 offer unique quasi-1D properties and numerous potential applications. Replacing sulfur by selenium would yield ternary WS2(1-x)Se2x (0 ≤ x ≤ 1; WSSe) nanotubes, which are expected to reveal strong modulation in their absorption edge as a function of selenium content, xSe. Solid WO2.72 oxide nanowhiskers were employed as a sacrificial template to gain a high yield of the nanotubes with a rather uniform size distribution. Though sulfur and selenium belong to the same period, their chemical reactivity with oxide nanowhiskers differed appreciably. Here, the closed ampoule technique was utilized to achieve the completion of the solid-vapor reaction in short time scales instead of the conventional flow reactor method. The structure and chemical composition of the nanotubes were analyzed in detail. X-ray and electron diffractions indicated a systematic modulation of the WSSe lattice upon increasing the selenium content. Detailed chemical mapping showed that the sulfur and selenium atoms are distributed in random positions on the anion lattice site of the nanotubes. The optical excitonic features and absorption edges of the WSSe nanotubes do not vary linearly with the composition xSe, which was further confirmed by density functional theory calculations. The WSSe nanotubes were shown to exhibit strong light-matter interactions forming exciton-polariton quasiparticles, which was corroborated by finite-difference time-domain simulations. Transient absorption analysis permitted following the excited state dynamics and elucidating the mechanism of the strong coupling. Thus, nanotubes of the ternary WSSe alloys offer strong band gap tunability, which would be useful for multispectral vision devices and other optoelectronic applications.

Observation of Biradical Spin Coupling through Hydrogen Bonds.

Investigation of intermolecular electron spin interaction is of fundamental importance in both science and technology. Here, radical pairs of all-trans retinoic acid molecules on Au(111) are created using an ultralow temperature scanning tunneling microscope. Antiferromagnetic coupling between two radicals is identified by magnetic-field-dependent spectroscopy. The measured exchange energies are from 0.1 to 1.0 meV. The biradical spin coupling is mediated through O─H⋯O hydrogen bonds, as elucidated from analysis combining density functional theory calculation and a modern version of valence bond theory.

Optimizing the quasi-equilibrium state of hot carriers in all-inorganic lead halide perovskite nanocrystals through Mn doping: fundamental dynamics and device perspectives.

Hot carrier (HC) cooling accounts for the significant energy loss in lead halide perovskite (LHP) solar cells. Here, we study HC relaxation dynamics in Mn-doped LHP CsPbI3 nanocrystals (NCs), combining transient absorption spectroscopy and density functional theory (DFT) calculations. We demonstrate that Mn2+ doping (1) enlarges the longitudinal optical (LO)-acoustic phonon bandgap, (2) enhances the electron-LO phonon coupling strength, and (3) adds HC relaxation pathways via Mn orbitals within the bands. The spectroscopic study shows that the HC cooling process is decelerated after doping under band-edge excitation due to the dominant phonon bandgap enlargement. When the excitation photon energy is larger than the optical bandgap and the Mn2+ transition gap, the doping accelerates the cooling rate owing to the dominant effect of enhanced carrier-phonon coupling and relaxation pathways. We demonstrate that such a phenomenon is optimal for the application of hot carrier solar cells. The enhanced electron-LO phonon coupling and accelerated cooling of high-temperature hot carriers efficiently establish a high-temperature thermal quasi-equilibrium where the excessive energy of the hot carriers is transferred to heat the cold carriers. On the other hand, the enlarged phononic band-gap prevents further cooling of such a quasi-equilibrium, which facilitates the energy conversion process. Our results manifest a straightforward methodology to optimize the HC dynamics for hot carrier solar cells by element doping.

Autonomous Design of Photoferroic Ruddlesden-Popper Perovskites for Water Splitting Devices.

The use of ferroelectric materials for light-harvesting applications is a possible solution for increasing the efficiency of solar cells and photoelectrocatalytic devices. In this work, we establish a fully autonomous computational workflow to identify light-harvesting materials for water splitting devices based on properties such as stability, size of the band gap, position of the band edges, and ferroelectricity. We have applied this workflow to investigate the Ruddlesden-Popper perovskite class and have identified four new compositions, which show a theoretical efficiency above 5%.

On the thermoelectric properties of Nb-doped SrTiO3 epitaxial thin films.

The exploration for thermoelectric thin films of complex oxides such as SrTiO3-based oxides is driven by the need for miniaturized harvesting devices for powering the Internet of Things (IoT). However, there is still not a clear consensus in the literature for the underlying influence of film thickness on thermoelectric properties. Here, we report the fabrication of epitaxial thin films of 6% Nb-doped SrTiO3 on (001) (LaAlO3)0.3(Sr2AlTaO6)0.7 (LSAT) single crystal using pulsed laser deposition (PLD) where the film thickness was varied from 2 nm to 68 nm. The thickness dependence shows a subtle increase of tetragonality of the thin film lattice and a gradual drop of the electrical conductivity, the density of charge carriers, and the thermoelectric Seebeck coefficient as the film thickness decreases. DFT-based calculations show that ∼2.8% increase in tetragonality results in an increased splitting between t2g and eg orbitals to ∼42.3 meV. However, experimentally observed tetragonality for films between 68 to 13 nm is only 0.06%. Hence, the effect of thickness on tetragonality is neglected. We have discussed the decrease of conductivity and the Seebeck coefficient based on the decrease of carriers and change in the scattering mechanism, respectively.

Electromechanically active pair dynamics in a Gd-doped ceria single crystal.

Oxygen-defective ceria, e.g. Gd-doped ceria, shows giant electromechanical properties related to a complex local rearrangement of its lattice. Although they are not entirely identified, the electroactive mechanisms arise from cation and oxygen vacancy (VO) pairs (i.e. Ce-VO), and the local structural elastic distortion in their surroundings. Here, we study the geometry and behaviour of Ce-VO pairs in a grain boundary-free bulk Ce0.9Gd0.1O1.95 single crystal under an AC electric field of ca. 11 kV cm-1. The analysis was carried out through X-ray absorption spectroscopy (XAS) techniques at the Ce L-III edge. Using Density Functional Theory (DFT) calculations, we investigated the effects of the strain on density of states and orbitals at the valence band edge. Our research indicates that electrostriction increases at low temperatures. The electromechanical strain has a structural nature and can rise by one order of magnitude, i.e., from 5 × 10-4 at room temperature to 5 × 10-3 at -193 °C, due to an increase in the population of the electrically active pairs. At a constant VO concentration, the material can thus configure heterogeneous pairs and elastic nanodomains that are either mechanically responsive or not.

Free Carriers versus Self-Trapped Excitons at Different Facets of Ruddlesden-Popper Two-Dimensional Lead Halide Perovskite Single Crystals.

The physical origin of sub-band gap photoluminescence in Ruddlesden-Poppers two-dimensional (2D) lead halide perovskites (LHPs) is still under debate. In this paper, we studied the photoluminescence features from two different facets of 2D LHP single crystals: the in-plane facet (IF) containing the 2D inorganic layers and the facet perpendicular to the 2D layers (PF). At the IF, the free carriers (FCs) dominate due to the weak electron-phonon coupling in a symmetric lattice. At the PF, the strain accumulation along the 2D layers enhances the electron-phonon coupling and facilitates self-trapped exciton (STE) formation. The time-resolved PL studies indicate that free carriers (FCs) at the IF can move freely and display the trapping by the intrinsic defects. The STEs at the PF are not likely trapped by the defects due to the reduced mobility. However, with increasing STE density, the STE transport is promoted, enabling the trapping of STE by the intrinsic defects.

Atomic-scale insights into electro-steric substitutional chemistry of cerium oxide.

Cerium oxide (ceria, CeO2) is one of the most promising mixed ionic and electronic conducting materials. Previous atomistic analysis has widely covered the effects of substitution on oxygen vacancy migration. However, an in-depth analysis of the role of cation substitution beyond trivalent cations has rarely been explored. Here, we investigate soluble monovalent (Li+, Na+, K+, Rb+), divalent (Fe2+, Co2+, Mn2+, Mg2+, Ni2+, Zn2+, Cd2+, Ca2+, Sr2+, Ba2+), trivalent (Al3+, Fe3+, Sc3+, In3+, Lu3+, Yb3+, Y3+, Er3+, Gd3+, Eu3+, Nd3+, Pr3+, La3+) and tetravalent (Si4+, Ge4+, Ti4+, Sn4+, Hf4+, Zr4+) cation substituents. By combining classical simulations and quantum mechanical calculations, we provide an insight into defect association energies between substituent cations and oxygen vacancies as well as their effects on the diffusion mechanisms. Our simulations indicate that oxygen ionic diffusivity of subvalent cation-substituted systems follows the order Gd3+ > Ca2+ > Na+. With the same charge, a larger size mismatch with the Ce4+ cation yields a lower oxygen ionic diffusivity, i.e., Na+ > K+, Ca2+ > Ni2+, Gd3+ > Al3+. Based on these trends, we identify species that could tune the oxygen ionic diffusivity: we estimate that the optimum oxygen vacancy concentration for achieving fast oxygen ionic transport is ≈2.5% for GdxCe1-xO2-x/2, CaxCe1-xO2-x and NaxCe1-xO2-3x/2 at 800 K. Remarkably, such a concentration is not constant and shifts gradually to higher values as the temperature is increased. We find that co-substitutions can enhance the impact of the single substitutions beyond that expected by their simple addition. Furthermore, we identify preferential oxygen ion migration pathways, which illustrate the electro-steric effects of substituent cations in determining the energy barrier of oxygen ion migration. Such fundamental insights into the factors that govern the oxygen diffusion coefficient and migration energy would enable design criteria to be defined for tuning the ionic properties of the material, e.g., by co-substitutions.

Modulating Charge-Carrier Dynamics in Mn-Doped All-Inorganic Halide Perovskite Quantum Dots through the Doping-Induced Deep Trap States.

Transition-metal ion doping has been demonstrated to be effective for tuning the photoluminescence properties of perovskite quantum dots (QDs). However, it would inevitably introduce defects in the lattice. As the Mn concentration increases, the Mn dopant photoluminescence quantum yield (PLQY) first increases and then decreases. Herein the influence of the dopant and the defect states on the photophysics in Mn-doped CsPbCl3 QDs was studied by time-resolved spectroscopies, whereas the energy levels of the possible defect states were analyzed by density functional theory calculations. We reveal the formation of deep interstitials defects (Cli) by Mn2+ doping. The depopulation of initial QD exciton states is a competition between exciton-dopant energy transfer and defect trapping on an early time scale (<100 ps), which determines the final PLQY of the QDs. The present work establishes a robust material optimization guideline for all of the emerging applications where a high PLQY is essential.

The role of an interface in stabilizing reaction intermediates for hydrogen evolution in aprotic electrolytes.

By combining idealized experiments with realistic quantum mechanical simulations of an interface, we investigate electro-reduction reactions of HF, water and methanesulfonic acid (MSA) on the single crystal (111) facets of Au, Pt, Ir and Cu in organic aprotic electrolytes, 1 M LiPF6 in EC/EMC 3:7W (LP57), the aprotic electrolyte commonly used in Li-ion batteries, 1 M LiClO4 in EC/EMC 3:7W and 0.2 M TBAPF6 in 3 : 7 EC/EMC. In our previous work, we have established that LiF formation, accompanied by H2 evolution, is caused by a reduction of HF impurities and requires the presence of Li at the interface, which catalyzes the HF dissociation. In the present paper, we find that the measured potential of the electrochemical response for these reduction reactions correlates with the work function of the electrode surfaces and that the work function determines the potential for Li+ adsorption. The reaction path is investigated further by electrochemical simulations suggesting that the overpotential of the reaction is related to stabilizing the active structure of the interface having adsorbed Li+. Li+ is needed to facilitate the dissociation of HF which is the source of protons. Further experiments on other proton sources, water and methanesulfonic acid, show that if the hydrogen evolution involves negatively charged intermediates, F- or HO-, a cation at the interface can stabilize them and facilitate the reaction kinetics. When the proton source is already significantly dissociated (in the case of a strong acid), there is no negatively charged intermediate and thus the hydrogen evolution can proceed at much lower overpotentials. This reveals a situation where the overpotential for electrocatalysis is related to stabilizing the active structure of the interface, facilitating the reaction rather than providing the reaction energy.