Supramolecular red-light-photosensitized nitric oxide release with fluorescence self-reporting within biocompatible nanocarriers.

The strict dependence of the biological effects of nitric oxide (NO) on its concentration and generation site requires this inorganic free radical to be delivered with precise spatiotemporal control. Light-activation by suitable NO photoprecursors represents an ideal approach. Developing strategies to activate NO release using long-wavelength excitation light in the therapeutic window (650-1300 nm) is challenging. In this contribution, we demonstrate that NO release by a blue-light activatable NO photodonor (NOPD) with self-fluorescence reporting can be triggered catalytically by the much more biocompatible red light exploiting a supramolecular photosensitization process. Different red-light absorbing photosensitizers (PSs) are co-entrapped with the NOPD within different biocompatible nanocarriers such as Pluronic® micelles, microemulsions and branched cyclodextrin polymers. The intra-carrier photosensitized NO release, involving the lowest, long-lived triplet state of the PS as the key intermediate and its quenching by the NOPD, is competitive with that by molecular oxygen. This allows NO to be released with good efficacy, even under aerobic conditions. Therefore, the adopted general strategy provides a valuable tool for generating NO from an already available NOPD, otherwise activatable with the poorly biocompatible blue light, without requiring any chemical modification and using sophisticated and expensive irradiation sources.

Physicochemical Characterization of a Biomimetic, Elastin-Inspired Polypeptide with Enhanced Thermoresponsive Properties and Improved Cell Adhesion.

Genetic engineering allows fine-tuning and controlling protein properties, thus exploiting the new derivatives to obtain novel materials and systems with improved capacity to actively interact with biological systems. The elastin-like polypeptides are tunable recombinant biopolymers that have proven to be ideal candidates for realizing bioactive interfaces that can interact with biological systems. They are characterized by a thermoresponsive behavior that is strictly related to their peculiar amino acid sequence. We describe here the rational design of a new biopolymer inspired by elastin and the comparison of its physicochemical properties with those of another already characterized member of the same protein class. To assess the cytocompatibility, the behavior of cells of different origins toward these components was evaluated. Our study shows that the biomimetic strategy adopted to design new elastin-based recombinant polypeptides represents a versatile and valuable tool for the development of protein-based materials with improved properties and advanced functionality.

On the photobehaviour of curcumin in biocompatible hosts: The role of H-abstraction in the photodegradation and photosensitization.

Curcumin (CUR) is a naturally occurring pigment extensively studied due to its therapeutic activity and delivered by suitable nanocarriers to overcome poor solubility in aqueous media. The significant absorption of CUR in the visible blue region has prompted its use as a potential phototherapeutic agent in treating infectious and cancer diseases, although the mechanism underlying the phototoxic effects is still not fully understood. This contribution investigates the photobehaviour of CUR within polymeric micelles, microemulsions, and zein nanoparticles, chosen as biocompatible nanocarriers, and human serum albumin as a representative biomolecule. Spectroscopic studies indicate that in all host systems, the enolic tautomeric form of CUR is converted in a significant amount of the diketo form because of the perturbation of the intramolecular hydrogen bond. This leads to intermolecular H-abstraction from the host components by the lowest excited triplet state of CUR with the formation of the corresponding ketyl radical, detected by nanosecond laser flash photolysis. This radical is oxidized by molecular oxygen, likely generating peroxyl and hydroperoxyl radical species, unless in Zein, reasonably due to the poor availability of oxygen in the closely packed structure of this nanocarrier. In contrast, no detectable formation of singlet oxygen was revealed in all the systems. Overall these results highlight the key role of the H-abstraction process over singlet oxygen sensitization as a primary photochemical pathway strictly dictated by the specific features of the microenvironment, providing new insights into the photoreactivity of CUR in biocompatible hosts that can also be useful for a better understanding of its phototoxicity mechanism.

Lactobacillus delbrueckii subsp. bulgaricus derivatives for 3D printed alginate/hyaluronic acid self-crosslinking hydrogels: Manufacturing and wound healing potential.

Derivatives [i.e. proteins and exopolysaccharides (EPS)] from Lactobacillus delbrueckii subsp. bulgaricus (LB) were extracted, characterized, and for the first time used in the production of novel self-crosslinking 3D printed alginate/hyaluronic acid (ALG/HA) hydrogels, as high-value functional biomaterials with therapeutic potentials in regenerative medicine applications. Derivatives coming from two different LB strains, LB1865 and LB1932, were tested in-vitro and compared for their cytotoxicity and effect on proliferation and migration on human fibroblast. EPS received particular attention as showing relevant dose-dependent cytocompatibility against the human fibroblast. The derivatives showed an ability to increase cell proliferation and migration, quantifiable between 10 and 20 % if compared to controls, with higher values for the derivatives obtained from the LB1932 strain. These were explained by liquid chromatography-mass spectrometry targeted protein biomarker analysis as a decrease in matrix-degrading and proapoptotic proteins, associated with an increase in collagen and antiapoptotic proteins production. LB1932 enriched hydrogel was found to be of benefit compared to control dressings, giving the more promising results as potential for in vivo skin wound healing tests.

Alginate Self-Crosslinking Ink for 3D Extrusion-Based Cryoprinting and Application for Epirubicin-HCl Delivery on MCF-7 Cells.

3D-printed hydrogels are particularly advantageous as drug-delivery platforms but their loading with water-soluble active compounds remains a challenge requiring the development of innovative inks. Here, we propose a new 3D extrusion-based approach that, by exploiting the internal gelation of the alginate, avoids the post-printing crosslinking process and allows the loading of epirubicin-HCl (EPI). The critical combinations of alginate, calcium carbonate and d-glucono-δ-lactone (GDL) combined with the scaffold production parameters (extrusion time, temperature, and curing time) were evaluated and discussed. The internal gelation in tandem with 3D extrusion allowed the preparation of alginate hydrogels with a complex shape and good handling properties. The dispersion of epirubicin-HCl in the hydrogel matrix confirmed the potential of this self-crosslinking alginate-based ink for the preparation of 3D-printed drug-delivery platforms. Drug release from 3D-printed hydrogels was monitored, and the cytotoxic activity was tested against MCF-7 cells. Finally, the change in the expression pattern of anti-apoptotic, pro-apoptotic, and autophagy protein markers was monitored by liquid-chromatography tandem-mass-spectrometry after exposure of MCF-7 to the EPI-loaded hydrogels.

3D-printed scaffold composites for the stimuli-induced local delivery of bioactive adjuncts.

Polysaccharide scaffolds have been successfully employed to reconstruct environments that sustain skin tissue regeneration after injuries. Three-dimensional (3D) advanced additive manufacturing technologies allow creating scaffolds with controlled and reproducible macro- and micro-structure that improve the quality of the restored tissue to favor spontaneous repair. However, when persistent inflammation occurs, the physiological tissue healing capacity is reduced, like in the presence of pathologies like diabetes, vascular diseases, chronic infection, and others. In these circumstances, the bioavailability of therapeutic adjuncts like the growth factors in addition to the standard treatments represents undoubtedly a promising strategy to accelerate the healing of skin lesions. Precisely designed polysaccharide scaffolds obtained by 3D printing represent a robust platform that can be further implemented with the controlled delivery of bioactive adjuncts. Human elastin-like polypeptides (HELPs) are stimuli-responsive biopolymers. Their structure allows the integration of domains endowed with biological functionality, making them attractive compounds to prepare composites with smart properties. In the present study, 3D-printed alginate and chitosan scaffolds were combined with the HELP components. The HELP biopolymer was fused to the epidermal growth factor (EGF) as the bioactive domain. Different constructs were prepared and the stimuli-responsive behavior as well as the biological activity were evaluated, suggesting that these smart bioactive composites are suitable to realize multifunctional dressings that sustain the local release of therapeutic adjuncts.

Wound dressings as growth factor delivery platforms for chronic wound healing.

Introduction: Years of tissue engineering research have clearly demonstrated the potential of integrating growth factors (GFs) into scaffolds for tissue regeneration, a concept that has recently been applied to wound dressings. The old concept of wound dressings that only take a passive role in wound healing has now been overtaken, and advanced dressings which can take an active part in wound healing, are of current research interest.Areas covered: In this review we will focus on the recent strategies for the delivery of GFs to wound sites with an emphasis on the different approaches used to achieve fine tuning of spatial and temporal concentrations to achieve therapeutic efficacy.Expert opinion: The use of GFs to accelerate wound healing and reduce scar formation is now considered a feasible therapeutic approach in patients with a high risk of infections and complications. The integration of micro - and nanotechnologies into wound dressings could be the key to overcome the inherent instability of GFs and offer adequate control over the release rate. Many investigations have led to encouraging outcomes in various in vitro and in vivo wound models, and it is expected that some of these technologies will satisfy clinical needs and will enter commercialization.

A thermoresponsive gel photoreleasing nitric oxide for potential ocular applications.

We report herein the design, preparation, characterization and biological evaluation of a thermoresponsive gel based on binary mixtures of Pluronic® co-polymers F127 and P123, the latter being covalently functionalized with a nitric oxide (NO) photodonor (NOPD). The weight ratio between the two polymeric components is optimized in order to observe gelation of their saline water solution in the range of 32-35 °C, in order to exploit the therapeutic properties of NO for potential ocular applications. Rheological measurements were performed to evaluate the gelation temperature and, hence, to select a co-polymer mixture specifically appropriate for the reference application. Integration of the NOPD into the polymeric scaffold does not affect its rheological and spectroscopic properties, making it a good absorber of visible light both in solution and in the gel phase. Irradiation of the saline solution of the polymeric components with visible light triggers NO release, which occurs with an efficiency of more than one order of magnitude faster than that observed for the isolated NOPD. The polymeric system fully preserves such photobehavior after gelation as demonstrated by the effective NO photorelease from the gel matrix and its diffusion in the supernatant upon illumination. The gel is well-tolerated in both dark and light conditions by corneal cells, while being able to induce growth inhibition towards Staphylococcus aureus under visible light irradiation and has high moduli which can contribute to an adequate retention time within the eyes.

Alginate/human elastin-like polypeptide composite films with antioxidant properties for potential wound healing application.

In this contribution we describe the preparation and characterization of a series of cross-linked films based on the combination of an elastin-derived biomimetic polypeptide (Human Elastin-Like Polypeptide, HELP) with alginate (ALG) to obtain a composite with enhanced properties. ALG/HELP composite films loaded with the hydrophobic natural antioxidant curcumin were prepared by solvent casting method followed by the cross-linking with calcium chloride. The compatibility between the two components as well as the final properties was evaluated. The micro-morphological study of films showed a homogeneous structure, but the film tensile strength decrease with HELP content and elongation at break was adversely affected by biopolymer addition. Spectroscopic and thermal analyses confirmed an interaction between ALG and HELP which also causes a modification in swelling kinetics and faster degradation. Moreover, the study of curcumin release showed a controlled delivery up to 10 days with a faster release rate in the presence of HELP. Human Dermal Fibroblasts (hDF) were used to test the in vitro cytocompatibility. The antioxidant activity correlated to the increase of HELP content suggested the applicability of these composites to develop smart biomaterials. Overall, these features indicated how this composite material has considerable potential as customizable platforms for various biomedical applications.

Visible light-activatable multicargo microemulsions with bimodal photobactericidal action and dual colour fluorescence.

In this contribution we report the design, preparation, and physico-chemical, photophysical and photochemical characterization of photoactivatable microemulsions (MEs) based on Labrasol®, isopropanol and Lauroglycol® FCC as a surfactant, co-surfactant and oily phase, respectively. The MEs co-incorporate, in their oil phase, two lipophilic guests such as a red emitting singlet oxygen (1O2) photosensitizer (PS) and a tailored green emitting nitric oxide (NO) photodonor (NOPD). These two chromofluorogenic units absorb in different spectral windows of the visible range, and their individual photophysical and photochemical properties are well-conserved when co-entrapped in the microemulsions. These features permit the PS and NOPD to operate either individually or in tandem resulting in (i) red, green or both fluorescence emission, (ii) photogeneration of cytotoxic 1O2, NO or both and (iii) amplified photobactericidal action against Staphylococcus aureus due to the combined effect of these two antibacterial agents.

A Preliminary Study of Pain Relieving Dressings for Older Adults With Chronic Leg Ulcers From the Provider's Perspective: A Qualitative Study.

Prevalence of leg ulcers increases with age due to an increase in risk factors, including immobility and venous disease. With an increasingly aging population, therefore, the number of older adults with leg ulcers is increasing. Older adults with leg ulcers experience frequent pain and discomfort, and yet pain in this population is poorly managed. The aim of this study was to explore the feasibility of the use of analgesic dressings in older adults with leg ulcers, including their perception of current pain management, feasibility of an analgesic dressing, and potential challenges. The overriding objective was to use the information to design a novel advanced dressing that is highly effective and acceptable to patients and health professionals at affordable cost. Focus groups involving nurses, with experience of leg ulcers, were conducted. Participants were asked their opinion on pain from leg ulcers, including perception of current pain management, feasibility of an analgesic dressing, and potential challenges of using analgesia in this format. Focus groups and interviews were recorded and transcribed verbatim and analyzed using a framework approach. Fifteen nurses attended two focus groups and one older adult completed a telephone interview. The overall opinion of an analgesic dressing were very positive; the key themes relating to the use of an analgesic dressing in practice include duration of pain relief; when pain occurs; type of analgesic; skin integrity; training/experience; compliance; and dressing practicalities. Leg ulcers are well known to be painful and often associated with social stigma. A dressing that deals with absorption issues and can help to manage pain, particularly during dressing changes (when pain is highest), would be welcomed by nurse professionals. This preliminary study provides a basis upon which future research can be based.

Macroporous alginate foams crosslinked with strontium for bone tissue engineering.

Nowadays, the need of novel strategies to repair and regenerate bone defects in the field of biomedical applications has increased. Novel approaches include the design of natural bioactive scaffolds mimicking bone tissue. These bioactive scaffolds have to possess biophysical properties suitable to address biological response towards newly bone tissue formation. In particular, scaffold porosity and pore size play a pivotal role in cell migration, adhesion and proliferation, thus increasing cell-material surface interaction and osteogenic signals transmission. Here we propose the development of macroporous alginate foams (MAFs) with porous and well interconnected structure, useful to enhance growth and osteogenic differentiation of human Mesenchymal Stem Cells (hMSCs). Moreover, in this study we report a new method for MAFs fabrication based on the combination of internal gelation technique with gas foaming. Strontium was employed in combination with calcium as cross-linking agent for the alginate chains and as enhancer of the osteogenic differentiation. The influence of strontium ions on the gelation kinetics, physical properties and degradation in physiological medium of MAFs was investigated. Our results suggest that the combination of internal gelation technique with gas foaming followed by freeze-drying is an easy and straightforward procedure to prepare alginate foams with high porosity and interconnectivity, able to support cell infiltration. Finally, biological assays showed how scaffolds with high strontium content are able to support cell growth and differentiation in long times by promoting osteogenic marker expression.

Composite Alginate-Hyaluronan Sponges for the Delivery of Tranexamic Acid in Postextractive Alveolar Wounds.

The management of wounds in patients on anticoagulant therapy who require oral surgical procedures is problematic and often results in a nonsatisfactory healing process. Here, we report a method to prepare an advanced dressing able to avoid uncontrolled bleeding by occluding the postextractive alveolar wounds, and simultaneously, capable of a fast release of tranexamic acid (TA). Composite alginate/hyaluronan (ALG/HA) sponge dressings loaded with TA were prepared by a straightforward internal gelation method followed by a freeze-drying step. Both blank and drug-loaded sponges were soft, flexible, and elegant in appearance and nonbrittle in nature. Scanning electron microscopy analysis confirmed the porous nature of these dressings. The integration of HA influenced the microstructure, reducing the porosity, modifying the water uptake kinetic, and increasing the resistance to compression. TA release from ALG/HA sponges showed a controlled release up to 3 h, and it was faster in the presence of HA. Finally, an in vitro clotting test performed on human whole blood confirmed that the TA-loaded sponges significantly reduce the blood clotting index by 30% compared with ALG/HA20 sponges. These results suggest that, if placed in a socket cavity, these dressings could give a relevant help to the blood hemostasis after dental extractions, especially in patients with coagulation disorders.

Advanced multi-targeted composite biomaterial dressing for pain and infection control in chronic leg ulcers.

This study aimed to develop advanced biomaterial polysaccharide based dressings to manage pain associated with infected chronic leg ulcers in older adults. Composite carrageenan (CARR) and hyaluronic acid (HA) dressings loaded with lidocaine (LID) and AgNPs were formulated as freeze-dried wafers and functionally characterized for porous microstructure (morphology), mechanical strength, moisture handling properties, swelling, adhesion and LID release. Antimicrobial activity of AgNPs was evaluated (turbidity assay) against Escherichia coli, Pseudomonas aeruginosa and Staphylococcus aureus whilst cell viability studies (MTT) was performed on normal adult human primary epidermal keratinocyte cells. The wafers were soft, flexible and elegant in appearance. HA affected the wafer structure by increasing the resistance to compression but still possessed a balance between toughness and flexibility to withstand normal stresses and prevent damage to newly formed skin tissue respectively. Water uptake was influenced by HA, whilst equilibrium water content and LID release were similar for all the formulations, showing controlled release up to 6h. AgNPs loaded CARR/HA wafers were effective in inhibiting the growth of both Gram positive and Gram negative bacteria. MTT assay showed evidence that the AgNPs/LID loaded wafers did not interfere with cell viability and growth. CARR/HA wafers seem to be a promising system to simultaneously deliver LID and AgNPs, directly to infected chronic leg ulcers.

Advanced Therapeutic Dressings for Effective Wound Healing--A Review.

Advanced therapeutic dressings that take active part in wound healing to achieve rapid and complete healing of chronic wounds is of current research interest. There is a desire for novel strategies to achieve expeditious wound healing because of the enormous financial burden worldwide. This paper reviews the current state of wound healing and wound management products, with emphasis on the demand for more advanced forms of wound therapy and some of the current challenges and driving forces behind this demand. The paper reviews information mainly from peer-reviewed literature and other publicly available sources such as the US FDA. A major focus is the treatment of chronic wounds including amputations, diabetic and leg ulcers, pressure sores, and surgical and traumatic wounds (e.g., accidents and burns) where patient immunity is low and the risk of infections and complications are high. The main dressings include medicated moist dressings, tissue-engineered substitutes, biomaterials-based biological dressings, biological and naturally derived dressings, medicated sutures, and various combinations of the above classes. Finally, the review briefly discusses possible prospects of advanced wound healing including some of the emerging physical approaches such as hyperbaric oxygen, negative pressure wound therapy and laser wound healing, in routine clinical care.

ß-cyclodextrin nanosponges as multifunctional ingredient in water-containing semisolid formulations for skin delivery.

A ß-cyclodextrin nanosponge cross-linked with pyromellitic dianhydride (ßNS-PYRO) is reported for the first time as multifunctional ingredient in semisolid formulations for drug delivery to the skin. The role of ßNS-PYRO on solubilization and stabilization of the photosensitizer benzoporphyrin-derivative monoacid ring A (BPDMA) and all-trans retinoic acid (atRA) as well as its effect on skin permeation of diclofenac (DIC) was investigated. Aqueous solutions, gels, and cream-gels were prepared from mixtures of ßNS-PYRO with a conventional gelling agent at specific ratios. The incorporation of BPDMA in ßNS-PYRO water solutions prevented its aggregation and gave kinetically stable complexes with high photostability and singlet oxygen generation upon irradiation. atRA incorporated in the ßNS-PYRO-containing gel demonstrated a remarkable stability as compared with the formulation without ßNS-PYRO, resulting in an eightfold increase of its lifetime. Skin permeation studies highlighted that ßNS-PYRO in gels and cream-gels containing DIC significantly decreased the amount of drug permeated through the skin while increasing its amount in stratum corneum and viable epidermis. Overall, swellable ßNS-PYRO turns to be a multifunctional coingredient with potential in topical monophasic and biphasic formulations to stabilize light-sensitive drugs and to localize the action of highly penetrating drugs in the external layers of skin.

Melt-spun bioactive sutures containing nanohybrids for local delivery of anti-inflammatory drugs.

In this work, a novel concept is introduced in drug-eluting fibres to ensure a good control of drug delivery features and wide applicability to different bioactive compounds. Composite bioactive sutures based on fibre grade poly(ε-caprolactone) (PCL) and loaded with the anti-inflammatory drug Diclofenac (Dic) or a Dic nanohybrid where the drug is intercalated in a synthetic hydrotalcite (Mg/Al hydroxycarbonate) (HT-Dic) were developed. Fibres were prepared by melt-spinning at different PCL/HT-Dic/Dic ratios and analysed in terms of morphology, mechanical properties and drug release features. Results emphasized that tensile properties of fibres are clearly affected by Dic or HT-Dic addition, while the presence of knots has limited influence on the mechanical behaviour of the sutures. Release of Dic strongly depends on how Dic is loaded in the fibre (as free or nanohybrid) whereas the combination of free Dic and HT-Dic can allow a further tuning of release profile. In vivo experiments show a reduction of inflammatory responses associated with Dic-loaded fibers. Thus, a proof of principle is provided for a novel class of bioactive sutures integrating advanced controlled-release technologies.

Use of cyclodextrins as solubilizing agents for simvastatin: effect of hydroxypropyl-ß-cyclodextrin on lactone/hydroxyacid aqueous equilibrium.

The chemical conversion of simvastatin from the lactone (SVL) to the hydroxyacid (SVA) form is becoming an intriguing issue associated with the pharmacological use of SVL. On this matter, recent findings suggest that SVL complexation with cyclodextrins (CDs) may be a useful strategy to affect its aqueous solubility and chemical stability. In this work, a reverse-phase high-performance liquid chromatography (RP-HPLC) method able to selectively identify and quantify SVL and SVA has been set up, validated and applied to follow SVL hydrolysis in the presence of HPßCD. The combination of stability results with simvastatin/HPßCD stability constants achieved from UV-vis measurements and solubility/dissolution studies allowed to get an insight into SVL/HPßCD, SVA/HPßCD and SVL/SVA equilibria taking place in aqueous solution. Results show that in the presence of HPßCD the aqueous SVL/SVA equilibrium is shifted versus the hydroxyacid form. UV-vis results, showing that the lactone and the open-ring form of simvastatin interact with HPßCD in a similar extent, suggest that hydrolysis occurs also on SVL/HPßCD complex, thus supporting a mode of interaction that does not involve the lactone ring. This hypothesis is strengthened by NMR analysis performed on SVA, HPßCD and their inclusion complex, which indicates that the lactone ring is not included in HPßCD hydrophobic cavity. Finally, results suggest that particular attention must be paid to SVL lactonization in aqueous solution when using CD-based formulations and in demonstrating their effective benefit for a specific therapeutic use.