Skeletal CH3OH/NOx Kinetic Model for Simulating Spark-Ignition and Turbulent Jet Ignition Engines.

Methanol is a promising renewable fuel for achieving a better engine combustion efficiency and lower exhaust emissions. Under exhaust gas recirculation conditions, trace amounts of nitrogen oxides have been shown to participate in fuel oxidation and impact the ignition characteristics significantly. Despite numerous studies that analyzed the methanol/NOx interaction, no reliable skeletal kinetic mechanism is available for computational fluid dynamics (CFD) modeling. This work focuses on developing a skeletal CH3OH/NOx kinetic model consisting of 25 species and 55 irreversible and 27 reversible reactions, used for full-cycle engine combustion simulations. New experiments of methanol with the presence of 200 ppmv NO/NO2 were conducted in a rapid compression machine (RCM) at engine-relevant conditions (20-30 bar, 850-950 K). Experimental results indicate notable enhancement effects of the presence of NO/NO2 on methanol ignition under the conditions tested, which highlights the importance of including the CH3OH/NOx interactions in predicting combustion performance. The proposed skeletal mechanism was validated against the literature and new methanol and methanol/NOx experiments over a wide range of operating conditions. Furthermore, the skeletal mechanism was applied in three-dimensional (3D) CFD full-cycle simulations of spark-ignition (SI) and turbulent jet ignition (TJI) engine combustion using methanol. Simulation results demonstrate good agreement with experimental measurements of pressure traces and engine metrics, proving that the proposed skeletal mechanism is suitable and sufficient for CFD simulations.

Single-camera, single-shot, time-resolved laser-induced incandescence decay imaging.

Knowledge of soot particle sizes is important for understanding soot formation and heat transfer in combustion environments. Soot primary particle sizes can be estimated by measuring the decay of time-resolved laser-induced incandescence (TiRe-LII) signals. Existing methods for making planar TiRe-LII measurements require either multiple cameras or time-gate sweeping with multiple laser pulses, making these techniques difficult to apply in turbulent or unsteady combustion environments. Here, we report a technique for planar soot particle sizing using a single high-sensitivity, ultra-high-speed 10 MHz camera with a 50 ns gate and no intensifier. With this method, we demonstrate measurements of background flame luminosity, prompt LII, and TiRe-LII decay signals for particle sizing in a single laser shot. The particle sizing technique is first validated in a laminar non-premixed ethylene flame. Then, the method is applied to measurements in a turbulent ethylene jet flame.