Radiolytically reworked Archean organic matter in a habitable deep ancient high-temperature brine.

Investigations of abiotic and biotic contributions to dissolved organic carbon (DOC) are required to constrain microbial habitability in continental subsurface fluids. Here we investigate a large (101-283 mg C/L) DOC pool in an ancient (>1Ga), high temperature (45-55 °C), low biomass (102-104 cells/mL), and deep (3.2 km) brine from an uranium-enriched South African gold mine. Excitation-emission matrices (EEMs), negative electrospray ionization (-ESI) 21 tesla Fourier-transform ion cyclotron resonance mass spectrometry (FT-ICR MS), and amino acid analyses suggest the brine DOC is primarily radiolytically oxidized kerogen-rich shales or reefs, methane and ethane, with trace amounts of C3-C6 hydrocarbons and organic sulfides. δ2H and δ13C of C1-C3 hydrocarbons are consistent with abiotic origins. These findings suggest water-rock processes control redox and C cycling, helping support a meagre, slow biosphere over geologic time. A radiolytic-driven, habitable brine may signal similar settings are good targets in the search for life beyond Earth.

Complex Mixture Analysis of Emerging Contaminants Generated from Coal Tar- and Petroleum-Derived Pavement Sealants: Molecular Compositions and Correlations with Toxicity Revealed by Fourier Transform Ion Cyclotron Resonance Mass Spectrometry.

Pavement sealants are of environmental concern because of their complex petroleum-based chemistry and potential toxicity. Specifically, coal tar-derived sealants contain high concentrations of toxic/carcinogenic polycyclic aromatic hydrocarbons (PAHs) that, when weathered, can be transferred into the surrounding environment. Previous studies have demonstrated the effects of coal tar sealants on PAH concentration in nearby waterways and their harmful effects in aquatic ecosystems. Here, we investigate and compare the molecular composition of two different pavement sealants, petroleum asphalt- and coal tar-derived, and their photoproducts, by positive-ion (+) atmospheric pressure photoionization (APPI) and negative-ion (-) electrospray ionization (ESI) coupled with ultrahigh-resolution Fourier transform ion cyclotron resonance mass spectrometry to address species (high-boiling and/or high oxygen content) that lie outside the analytical window of other techniques due to ultra-high molecular complexity. In addition, we evaluate the toxicity of the water-soluble photoproducts by use of Microtox bioassay. The results demonstrate that the coal tar sealant contains higher amounts of PAHs and produces abundant water-soluble compounds, relative to unweathered materials, with a high abundance of PAH-like molecules of high toxicity. By comparison, the asphalt sealant produces fewer toxic water-soluble species, with molecular compositions that are consistent with natural dissolved organic matter. These results capture the mass, chemical diversity, toxicity, and source/photoproduct relationship of these compositionally complex emerging contaminants from the built environment.

Expanding the Analytical Window for Biochar Speciation: Molecular Comparison of Solvent Extraction and Water-Soluble Fractions of Biochar by FT-ICR Mass Spectrometry.

Biochar, a low-density yet carbon-rich material derived from different organic materials pyrolyzed under low or no oxygen conditions, has been widely studied as a soil amendment, for greenhouse gas mitigation and in remediation of trace element-contaminated soils. Molecular speciation of biochar compounds has been challenging due to low solubility, aggregation, and immense compositional polydispersity that challenges nearly all mass spectrometry methods routinely applied to carbon-based organic materials. Through a combined technique approach that applies advanced analytical strategies, we provide bulk and molecular characterization of Kentucky bluegrass biochar that can be applied to any biomass or biochar sample. First, we characterize Kentucky bluegrass biochar chemical functional groups by solid-state magic-angle spinning dynamic nuclear polarization NMR (MAS-DNP NMR) and resolve aromatic and aliphatic signals from the pyrogenic material and intact plant material. Next, we isolate water-soluble biochar species by solid-phase extraction followed by Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) and identify highly polar, oxygen species across a wide carbon number range. Solvent fractionation of biochar further expands the compositional range and identifies condensed polycyclic aromatic species across nonpolar and polar classes detected by two ionization modes (-ESI and +APPI) by FT-ICR MS. Plotting biochar species with DBE versus carbon number highlights the pericondensed molecular structural motif that persists across numerous heteroatom classes and ionization modes. To the best of our knowledge, this is the first molecular level identification of nonfunctionalized PAHs in biochar extracts by APPI FT-ICR MS. Thus, we identify biochar species that span the same compositional space as coal, heavy oil asphaltenes, and coal tar and correspond to condensed ring PAHs.

Role of Molecular Structure in the Production of Water-Soluble Species by Photo-oxidation of Petroleum.

Asphaltenes are high-boiling and recalcitrant compounds that are generally minor components of crude oil (∼0.1-15.0 wt %) but dominate the composition of heavily weathered spilled petroleum. These solid residues exhibit a high structural complexity, comprised of polycyclic aromatic hydrocarbons (PAHs) that are a mixture of single-core (island) and multicore (archipelago) structural motifs. The mass fraction of each motif is sample-dependent. Thus, knowledge of a potential structural dependence (single- versus multicore) on the production of water-soluble species from asphaltene samples is key to understanding the contribution of photochemically generated dissolved organic matter from oil spills. In this work, asphaltene samples with enriched mass fractions of either island (single-core) or archipelago (multicore) structural motifs are photo-oxidized on artificial seawater by the use of a solar simulator. Molecular characterization of oil- and water-soluble photoproducts, conducted by Fourier transform ion cyclotron resonance mass spectrometry, reveals that island motifs exhibit very limited production of water-soluble species, and their oil-soluble products reflect the molecular composition of the starting material. Conversely, archipelago motifs yield a water-soluble compositional continuum of Ox, SxOy, and NxOy containing hydrocarbons species that exhibit the typical molecular fingerprint of dissolved organic matter (DOM). The lower carbon number and aromaticity of the archipelago-derived asphaltene photoproducts suggest the occurrence of photofragmentation (or photolysis) reactions. To investigate the possibility of the opposite reaction (photopolymerization), the photo-oxidation of small PAHs isolated from a low-boiling petroleum distillation cut was also performed. It yielded water-soluble compounds with carbon number and aromaticity up to 2-fold higher than the starting material, strongly suggesting that polymerization (addition reactions) occurs. Collectively, the results indicate that the presence of archipelago motifs and the occurrence of cracking/polymerization reactions are central in the production of dissolved organic matter from fossil fuels.

Characterization of an Asphalt Binder and Photoproducts by Fourier Transform Ion Cyclotron Resonance Mass Spectrometry Reveals Abundant Water-Soluble Hydrocarbons.

Road asphalt is comprised of aggregate (rocks) mixed with a binder composed of high-boiling petroleum-derived compounds, which have been thought to be relatively inert (unreactive) and thus leach small amounts of polyaromatic hydrocarbons (PAHs) into water from the built environment. However, recent studies have demonstrated that petroleum readily undergoes photooxidation and generates water-soluble oxygen-containing hydrocarbons. Therefore, here, we investigate the effects of solar irradiation on an asphalt binder. Upon irradiation in a photooxidation microcosm, thin films of the asphalt binder produce abundant oil- and water-soluble oxygenated hydrocarbons, which we hypothesize are also leached from roads and highways through photooxidation reactions. Ultrahigh-resolution Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) enables extensive compositional characterization of the virgin asphalt binder, irradiated asphalt binder, and the water-soluble photoproducts. The results reveal the production of water-soluble species that resemble the molecular composition of petroleum-derived dissolved organic matter, including abundant hydrocarbons and S-containing species with up to 18 oxygen atoms. The results also confirm photo-induced oxidation, fragmentation, and potentially polymerization as active processes involved in the production of water-soluble organic pollutants from asphalt.

Molecular-Level Characterization of Oil-Soluble Ketone/Aldehyde Photo-Oxidation Products by Fourier Transform Ion Cyclotron Resonance Mass Spectrometry Reveals Similarity Between Microcosm and Field Samples.

We present a solid-phase extraction method followed by derivatization with a charged tag to characterize ketone/aldehyde-containing functionalities (proposed photo-oxidation transformation products) in weathered petroleum by Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS). A photo-oxidation-only microcosm mimics solar irradiation of crude oil in the environment after an oil spill. A biodegradation-only microcosm enables independent determination as to which of the two weathering processes contributes to the formation of oil-soluble ketone/aldehyde species. Results confirm that photo-oxidation produces ketones/aldehydes in crude oil when exposed to solar radiation in laboratory experiments, whereas biodegraded oil samples do not produce ketone/aldehyde compounds. Field samples collected after different time periods and locations after the Deepwater Horizon oil spill are also shown to contain ketones/aldehydes, and comparison of field and photo-oxidation-only microcosm transformation products reveal remarkable similarity. These results indicate that the photo-oxidation microcosm comprehensively represents ketone/aldehyde-formation products in the field, whereas the biodegradation microcosm does not. Solid-phase extraction coupled with derivatization leads to selective identification of ketone/aldehyde species by MS. Although improved dynamic range and slightly reduced mass spectral complexity is achieved by separation/derivatization, comprehensive molecular characterization still requires mass resolving power and mass accuracy provided by FT-ICR MS.

Combating selective ionization in the high resolution mass spectral characterization of complex mixtures.

Direct "dilute and shoot" mass spectral analysis of complex naturally-occurring mixtures has become the "standard" analysis in environmental and petrochemical science, as well as in many other areas of research. Despite recent advances in ionization methods, that approach still suffers several limitations for the comprehensive characterization of compositionally complex matrices. Foremost, the selective ionization of highly acidic (negative electrospray ionization ((-) ESI)) and/or basic (positive electrospray ionization ((+) ESI)) species limits the detection of weakly acidic/basic species, and similar issues (matrix effects) complicate atmospheric pressure photo-ionization (APPI)/atmospheric pressure chemical ionization (APCI) analyses. Furthermore, given the wide range of chemical functionalities and structural motifs in these compositionally complex mixtures, aggregation can similarly limit the observed species to a small (10-20%) mass fraction of the whole sample. Finally, irrespective of the ionization method, the mass analyzer must be capable of resolving tens-of-thousands of mass spectral peaks and provide the mass accuracy (typically 50-300 ppb mass measurement error) required for elemental composition assignment, and thus is generally limited to high-field Fourier transform ion cyclotron mass spectrometry (FT-ICR MS). Here, we describe three approaches to combat the above issues for (+) ESI, (-) ESI, and (+) APPI FT-ICR MS analysis of petroleum samples. Each approach relies on chromatographic fractionation to help reduce selective ionization discrimination and target either specific chemical functionalities (pyridinic and pyrrolic species (nitrogen) or carboxylic acids (oxygen)) or specific structural motifs (single aromatic core (island) or multi-core aromatics (archipelago)) known to be related to ionization efficiency. Each fractionation method yields a 2-10-fold increase in the compositional coverage, exposes species that are undetectable using direct "dilute and shoot" analysis, and provides coarse selectivity in chemical functionalities that can both increase the assignment confidence and optimize ionization conditions to maximize compositional coverage.