Characterization of liquid-liquid extraction fractions from lignocellulosic biomass by high performance liquid chromatography hyphenated to tandem high-resolution mass spectrometry.

The conversion of lignocellulosic biomass is a major challenge in the field of renewable energies and bio-based chemicals. The diversity of biomasses and processes leads to complex products having a wide range of polarities and molecular weights. Nowadays, the molecular description of these oxygenated matrices is still largely incomplete and new analytical strategies are required to have a better understanding of biomass products properties. The present study proposes a reliable protocol based on successive liquid-liquid extractions prior to high performance liquid chromatography hyphenated to high-resolution tandem mass spectrometry (HPLC/MSn) using a linear ion trap-Fourier transform ion cyclotron resonance mass spectrometer (LTQ/FT-ICR). The protocol allowed to fractionate an industrial sample coming from the sulfuric acid-based pretreatment of a wheat straw into four key chemical families: carbohydrates, organic acids, phenols and neutral compounds. Each fraction was separately analyzed, which limited matrix effects during mass spectrometry ionization step. Electrospray and atmospheric pressure chemical ionization sources were used in both positive and negative modes in order to ionize and detect a maximum of compounds. Thanks to HPLC/MSn, structures of heavy lignin-carbohydrate complexes (LCC) were elucidated (up to 600 g/mol) as well as carbohydrate oligomers having acid functionalities. Mono, di, tri and tetra-aromatic compounds coming from lignin were also detected. The results reported in this paper demonstrate the complexity of pretreated biomass samples and propose an analytical approach from sample simplification to data treatment in order to describe the biomass composition.

Off-line comprehensive size exclusion chromatography × reversed-phase liquid chromatography coupled to high resolution mass spectrometry for the analysis of lignocellulosic biomass products.

Biochemical and thermochemical processes are two pathways to convert lignocellulosic biomass into fuels and chemicals. Both conversion types produce aqueous complex samples containing many oxygenated chemical functions over a wide range of masses. Nowadays, composition of these biomass products is still largely unknown, especially their nonvolatile part (300-1000 Da) mostly made of carbohydrates and their derivatives. In the present study, size exclusion chromatography (SEC) was investigated and applied on water soluble phase of a fast pyrolysis bio-oil (thermochemical conversion) and on aqueous phase of pretreated wheat straw (biochemical conversion). An optimization of mobile phase composition using model molecules was necessary to limit non-steric interactions and elute all chemical families. At the end, separation of carbohydrates, heterosides and aromatic species was performed. The chemical organization of SEC chromatograms was confirmed by coupling SEC with a Fourier transform-ion cyclotron resonance mass spectrometer (FT-ICR MS) using electrospray ionization (ESI) in the negative mode. On-line SEC-UV/FT-ICR MS hyphenation was a powerful tool to provide exact mass distribution of samples and get molecular formulae classed by chemical family. To go further, the complementarity of SEC with reversed-phase liquid chromatography (RPLC) was established with an off-line comprehensive 2D-LC analysis of the two samples. First, 140 fractions were collected physically from SEC separation for each sample, then each fraction was analyzed by RPLC hyphenated to an Ion Trap - Time of Flight mass spectrometer (SEC × RPLC-UV/IT-TOF MS) using ESI in both positive and negative modes. This comprehensive approach combining 2D-LC and high resolution mass spectrometry nearly doubled the number of peaks detected in comparison with 1D RPLC analysis and thus offered well resolved 2D contour plots, considered as relevant analytical fingerprints of the aqueous phase of biomass samples.

Centrifugal partition chromatography as a fractionation tool for the analysis of lignocellulosic biomass products by liquid chromatography coupled to mass spectrometry.

The conversion of lignocellulosic biomass into biofuels and bio-products leads to oxygenated matrices having a wide range of polarities and molecular weights. A complete analytical characterization of these complex mixtures is necessary to improve conversion processes. In this study, an innovative centrifugal partition chromatography (CPC) protocol was developed to fractionate aqueous biomass samples with a MTBE-water solvent system, by mixing elution, displacement and extrusion modes in the same run. This new protocol was validated on model molecules and applied to the water soluble phase of a fast pyrolysis bio-oil. It demonstrated a promising separation with a relevant selectivity on the most significant chemical families of biomass samples: carbohydrates, furans, carboxylic acids and phenols. CPC fractions of the sample were collected and analyzed comprehensively by HPLC-UV/MS (with ESI negative and positive ionization modes). This CPC x LC approach allowed more accurate attributions on the 217 peaks detected. The use of different detection modes gave a complete view of the water soluble phase of a fast pyrolysis bio-oil through 2D maps. Molecular characterization was enhanced by independent information: CPC retention time, LC retention time, UV and MS spectra. Concomitance of these different chemical information is of precious help for unambiguous identification.

Centrifugal partition chromatography a first dimension for biomass fast pyrolysis oil analysis.

Biomass fast pyrolysis oils contain molecules having a large variety of chemical functions and a wide range of molecular weights (from several tens to several thousand grams per mole). The good knowledge of their complex composition is essential for optimizing the conversion of bio-oils to biofuels, thereby requiring powerful separation techniques. In this work, we investigate the interest of centrifugal partition chromatography (CPC) as a first dimension for the analysis of a bio-oil. A CPC method is proposed to separate oxygen containing compounds according to their partition coefficients in the solvent system. This approach is a powerful and easy-to-use technique that enables fractionation of a bio-oil at a semi-preparative scale, without any sample loss related to adsorption on the stationary phase. Collected fractions are then injected in liquid chromatography as a second dimension of separation. Contour plot representations of the CPC × LC separation are established to discuss the potential of this approach. These representations can be used as a veritable fingerprint in the comparison of different samples or samples at different steps of a conversion process but also as a powerful tool to identify new compounds and describe the entire composition of the bio-oil.