Treatment of posterolateral tibial plateau fractures: a narrative review and therapeutic strategy.

The posterolateral tibial plateau is crucial for maintaining knee stability during flexion, and fractures in this area often involve ligament and meniscus injuries, necessitating effective management. However, treating posterolateral tibial plateau fractures (PLF) poses significant challenges due to the complex anatomy. Therefore, this review aims to explore contemporary concepts of PLF, from identification to fixation, and proposes a comprehensive treatment strategy. In this article, the authors detail the injury mechanisms, fracture morphology, PLF classification systems, surgical approaches, and techniques for open reduction and internal fixation (ORIF) as well as arthroscopic-assisted internal fixation (ARIF). The findings indicate that PLF is typically caused by flexion-valgus forces, resulting in depression or split-depression patterns. For isolated PLF, the supra-fibular head approach is often preferable, whereas posterior approaches are more suitable for combined fractures. Additionally, innovative plates, particularly the horizontal belt plate, have shown satisfactory outcomes in treating PLF. Currently, the 'bicondylar four-quadrant' concept is widely used for assessing and managing the tibial plateau fractures involving PLF, forming the cornerstone of the comprehensive treatment strategy. Despite challenges in surgical exposure and implant placement, ORIF remains the mainstream treatment for PLF, benefiting significantly from the supra-fibular head approach and the horizontal belt plate. Furthermore, ARIF has proven effective by providing enhanced visualization and surgical precision in managing PLF, emerging as a promising technique.

[A new fluoroscopic view to evaluate the medial and lateral articular reduction quality in patella fractures during internal fixation].

Objective: To introduce a new fluoroscopic method for assessing the quality of medial and lateral joint surface reduction during internal fixation of patellar fractures and to summarize the clinical outcomes of patients treated using this method. Methods: A retrospective analysis was conducted on the clinical data of 52 patients with patellar fractures treated between January 2018 and January 2022 who met the inclusion criteria. There were 27 male and 25 female patients, aged 21-75 years, with an average age of 62 years. The types of patellar fractures included 9 transverse fractures, 37 comminuted fractures, and 6 longitudinal fractures. According to the AO/Orthopaedic Trauma Association (AO-OTA)-2018 fracture classification, there were 21 cases of type 34A, 6 cases of type 34B, and 25 cases of type 34C. The time from injury to operation ranged from 1 to 5 days, with an average of 2.3 days. Treatments included internal fixation with hollow screws or hollow screw tension bands, with or without anchor repair. During operation, the medial and lateral joint surfaces of the patella were observed using the tangential fluoroscopic method to assess the smoothness of reduction of the median ridge, lateral joint surface, medial joint surface, and lateral joint edge. Patients were followed up regularly, and X-ray films were taken to observe fracture healing. Knee joint range of motion, Böstman score, and Lysholm score were used to evaluate functional recovery. Results: The tangential fluoroscopic method for the medial and lateral joint surfaces of the patella during operation showed satisfactory reduction of the joint surfaces and good positioning of the implants. All patients were followed up 12-16 months, with an average of 13.4 months. During the follow-up, fracture displacement occurred in 1 case and titanium cable breakage in 1 case. All patella fractures healed successfully, with a healing time of 8-16 weeks (mean, 11.4 weeks). At last follow-up, knee joint range of motion ranged from 120° to 140°, with an average of 136°. The Böstman score ranged from 20 to 30, with an average of 28, yielding excellent results in 45 cases and good results in 7 cases. The Lysholm score ranged from 88 to 100, with an average of 93, yielding excellent results in 40 cases and good results in 12 cases. Conclusion: The intraoperative application of the tangential fluoroscopic method for the medial and lateral joint surfaces of the patella can quickly determine the fluoroscopic plane of the patella, accurately assess the quality of fracture reduction and the position of internal fixator, thereby improving effectiveness.

[Influence of anterior fracture line on anterior cortical reduction loss after cephalomedullary nail fixation in intertrochanteric fractures].

Objective: To investigate the position of the anterior fracture line in AO/Orthopaedic Trauma Association (AO/OTA) type A2 unstable intertrochanteric fractures and its impact on the incidence of anterior cortical reduction loss after cephalomedullary nail fixation. Methods: A clinical data of 95 patients with intertrochanteric fractures who met the selection criteria between April 2020 and February 2023 was retrospectively analyzed. All patients were treated with cephalomedullary nail fixation, and the intra- and post-operative imaging data were complete. Among them, there were 37 males and 58 females. The age ranged from 61 to 97 years, with an average of 79.6 years. The time from injury to operation ranged from 7 hours to 11 days, with an average of 2.8 days. According to the 2018-AO/OTA classification standard, there were 39 cases of type 31-A2.2 and 56 cases of type 31-A2.3. Intraoperative fluoroscopy was used to record the number of patients with satisfactory fracture alignment. The preoperative CT data were imported into Mimics17.0 software to simulate the fracture reduction and measure the distance between the anterior fracture line and the intertrochanteric line bony ridge. The fractures were classified as transcapsular fractures, extra-capsular fractures, and intra-capsular fractures according to the distance. CT three-dimensional reconstruction was performed within 2 weeks after operation to observe the number of patients with anterior cortical reduction loss. The postoperative anterior cortical reduction loss incidence in patients with satisfactory fracture alignment, and the relationship between postoperative anterior cortical reduction loss and the position of the anterior fracture line were observed. Results: There were 52 cases (54.7%) of transcapsular fractures, 24 cases (25.3%) of extra-capsular fractures, and 19 cases (20.0%) of intra-capsular fractures. Among them, 41 of the 52 transcapsular fractures had satisfactory fracture alignment, and 4 (9.8%) of them experienced anterior cortical reduction loss after operation; 19 of the 24 extra-capsular fractures had satisfactory fracture alignment, and no anterior cortical reduction loss occurred; 16 of the 19 intra-capsular fractures had satisfactory fracture alignment, and 7 (43.8%) of them experienced anterior cortical reduction loss after operation. There was a significant difference in the incidence of anterior cortical reduction loss between groups ( χ 2=8.538， P=0.003). All patients were followed up 3-26 months (mean, 9 months). Among them, 91 cases had fracture healing, and 4 cases had nonunion. Conclusion: In AO/OTA type A2 unstable intertrochanteric fractures, where the anterior fracture line is located within the joint capsule, there is a high risk of anterior cortical reduction loss after operation.

Anteromedial Cortical Support in Reduction of Trochanteric Hip Fractures: From Definition to Application.

➤ The concept of anteromedial cortical support (AMCS) serves as valuable guidance for the intraoperative reduction of trochanteric hip fractures.➤ Positive medial cortical support (MCS) and positive or neutral anterior cortical support (ACS) are desirable. Some evidence has suggested that positive MCS is potentially superior to neutral MCS.➤ Experimental studies underscore the vital importance of the anteromedial wall and reveal why positive MCS potentially outperforms neutral MCS.➤ Incorporating the AMCS concept, the Chang reduction quality criteria (CRQC) are a reliable alternative approach to evaluate the reduction quality of trochanteric hip fractures.

Importance of the Posterior Plate in Three-Column Tibial Plateau Fractures: A Finite Element Analysis and Clinical Validation.

OBJECTIVE: Dual-plate fixation was thought to be the gold standard for treating complicated bicondylar tibial plateau fractures, yet it was found to be hard to accommodate the posterior column in three-column fractures. Currently, column-specific fixation is becoming more and more recognized, but no comprehensive investigation has been performed to back it up. Therefore, the objective of this study was to validate the importance of posterior column fixation in the three-column tibial fractures by a finite element (FE) analysis and clinical study. METHODS: In FE analysis, three models were developed: the longitudinal triple-plate group (LTPG), the oblique triple-plate group (OTPG), and the dual-plate group (DPG). Three loading scenarios were simulated. The distribution of the displacement and the equivalent von Mises stress (VMS) in each structure was calculated. The comparative measurements including the maximum posterior column collapse (MPCC), the maximum total displacement of the model (MTD), the maximum VMS of cortical posterior column (MPC-VMS), and the maximum VMS located on each group of plates and screws (MPS-VMS). The clinical study evaluated the indicators between the groups with or without the posterior plate, including operation time, blood loss volume, full-weight bearing period, Hospital for Special Surgery Knee Scoring system (HSS), Rasmussen score, and common postoperative complications. RESULTS: In the FE analysis, the MPCC, the MPC-VMS, and the MTD were detected in much lower amounts in LTPG and OTPG than in DPG. In comparison with DPG, the LTPG and OTPG had larger MPS-VMS. In the clinical study, 35 cases were included. In the triple-plate (14) and dual-plate (21) groups, the operation took 115.6 min and 100.5 min (p < 0.05), respectively. Blood loss in both groups was 287.0 mL and 206.6 mL (p < 0.05), and the full-weight bearing period was 14.5 weeks and 16.2 weeks (p < 0.05). At the final follow-up, the HSS score was 85.0 in the triple-plate group and 77.5 in the dual-plate (p < 0.05), the Rasmussen score was 24.1 and 21.6 (p < 0.05), there were two cases with reduction loss (9.5%) in the dual-plate group and one case of superficial incision infection found in the triple-plate group. CONCLUSION: The posterior implant was beneficial in optimizing the biomechanical stability and functional outcomes in the three-column tibial plateau fractures.

[Off target of distal interlocking screw in short cephalomedullary nail fixation for intertrochanteric femur fractures].

Objective: To analyze the causes and treatment of off target of the distal interlocking screws when short cephalomeduallry nails were installed through jig-guided targeting device, and to put forward the technical points to prevent off target. Methods: Retrospective analysis of 9 patients with intertrochanteric fractures treated between July 2014 and June 2023 was conducted, in which off target occurred during the insertion of the distal interlocking screw by jig-guided targeting device in short cephalomedullary nailling (<24 cm). There were 1 male and 8 females, with an average age of 82.7 years (range, 73-94 years). There were 3 cases of type A1, 5 cases of type A2, and 1 case of type A3 according to 2018-AO/Orthopaedic Trauma Association (AO/OTA) fracture classification. As for the misaligned distal interlocking screw, six parameters were collected and analyzed, including the time of finding, the position, the type of passing through the cortical bone, the special circumstances during operation (such as the need to remove the intramedullary nail for reaming the diaphysis, hammering, etc.), the treatment, and the patient follow-up results. Results: In the 9 patients, the off target of the distal interlocking screw was found in 7 cases during operation and in 2 cases after operation; the locking screw was located behind the nail in 7 cases and in front of the nail in 2 cases; the off target locking screw was passing tangentially in transcortical patern in 6 cases and in bicortical pattern through the medullary cavity in 3 cases. Three cases were attributed to the mismatch between the nail and the femur, two of which were attributed to the narrow femoral medullary cavity, one of which was attributed to the large anterolateral femoral bowing, and the other 6 cases were attributed to technical errors such as the loosening of the jig-guided targeting device, the tension of the fascia lata, and the blunt of the drill. In the 7 cases found during operation, the misaligned interlocking screw was removed first and the screw hole was left vacant, then in 2 cases, the interlocking screw was not used further; in 1 case, the distal dynamic hole was successfully inserted with a dynamic guide frame, and in 4 cases, the interlocking screw was successfully put after 2-3 attempts, leaving a large hole in the lateral cortex. No special treatment was performed in 2 cases found after operation. One patient was out of bed early after operation, 7 patients were in bed for 1 month, and 1 patient deteriorated to A3 type after operation and was in bed for 3 months. All the 9 patients were followed up 6-12 months, with an average of 8 months. Fracture healing was achieved in 8 patients. One patient with vacant interlocking screw had a secondary spiral fracture of the femoral shaft 3 months later, and was refixed with a long cephalomedullary nail and circlage wiring. Conclusion: Distal interlocking screw off target is rare, but when it occurs, it leaves a large cortical hole in the osteoporotic femoral shaft, reducing bone strength; the use of precision instruments and attention to technical details can reduce this adverse phenomenon.

[Research progress on distal interlocking screws of cephalomedullary nails in intertrochanteric fractures].

Objective: To summarize the new research progress in distal interlocking screws of cephalomedullary nails for the treatment of intertrochanteric fractures. Methods: Relevant domestic and foreign literature was extensively reviewed to summarize the static/dynamic types of distal interlocking screw holes, biomechanical studies, clinical studies and application principles, effects on toggling in the cavity, and related complications of distal interlocking screws. Results: The mode of the distal interlocking screw holes can be divided into static and dynamic. Distal interlocking screws play the role of anti-rotation, maintaining femur length, resisting compression stress, increasing torque stiffness, resisting varus stress, etc. The number of the screws directly affects the toggling of the main nail in the cavity. At present, regardless of whether long or short nails are used, distal interlocking screws are routinely inserted in clinical practice. However, using distal interlocking screws can significantly increase the duration of anesthesia and operation, increase fluoroscopy exposure time, surgical blood loss, and incision length. There is a trend of trying not to use distal interlocking screws in recent years. No significant difference is found in some studies between the effectiveness of dynamic and static interlocking for AO/Orthopaedic Trauma Association (AO/OTA) 31-A1/2 fractures. At present, the selection of the number and mode of distal interlocking screws is still controversial. When inserting distal interlocking screws, orthopedists should endeavor to minimize the occurrence of complications concerning miss shot, vascular injuries, local stress stimulation, and peri-implant fractures. Conclusion: Distal interlocking screws are mainly used to prevent rotation. For stable fractures with intact lateral walls, long cephalomedullary nails can be used without distal interlocking screws. For any type of intertrochanteric fractures, distal interlocking screws are required when using short cephalomedullary nails for fixation. Different interlocking modes, the number of interlocking screws, and the application prospects of absorbable interlocking screws may be future research directions.

Avulsion Fracture of the Tibialis Anterior Tendon Associated with First Metatarsal Base Fracture: A Case Report and Literature Review.

We present a unique case of a 59-year-old shipyard worker who sustained an avulsion fracture of the tibialis anterior tendon, concurrently with a comminuted fracture at the base of the first metatarsal. This is the first reported case highlighting this concomitant presentation, which underlines the possibility of avulsion fractures accompanying comminuted fractures. Importantly, such avulsion fractures could lead to skin tenting and potential necrosis, necessitating early identification and prompt intervention. The patient underwent successful surgical intervention and displayed good functional restoration 15 months postoperatively.

[Research progress on valgus impacted proximal humeral fractures].

Objective: To review the advancement made in the understanding of valgus impacted proximal humeral fracture (PHF). Methods: The domestic and foreign literature about the valgus impacted PHF was extensively reviewed and the definition, classification, pathological features, and treatment of valgus impacted PHFs were summarized. Results: PHF with a neck shaft angle ≥160° is recognized as a valgus impacted PHF characterized by the preservation of the medial epiphyseal region of the humeral head, which contributes to maintenance of the medial periosteum's integrity after fracture and reduces the occurrence of avascular necrosis. Therefore, the valgus impacted PHF has a better prognosis when compared to other complex PHFs. The Neer classification designates it as a three- or four-part fracture, while the AO/Association for the Study of Internal Fixation (AO/ASIF) categorizes it as type C (C1.1). In the management of the valgus impacted PHF, the selection between conservative and surgical approaches is contingent upon the patient's age and the extent of fracture displacement. While conservative treatment offers the advantage of being non-invasive, it is accompanied by limitations such as the inability to achieve anatomical reduction and the potential for multiple complications. Surgical treatment includes open reduction combined with steel wire or locking plate and/or non-absorbable suture, transosseous suture technology, and shoulder replacement. Surgeons must adopt personalized treatment strategies for each patient with a valgus impacted PHF. Minimally invasive surgery helps to preserve blood supply to the humeral head, mitigate the likelihood of avascular necrosis, and reduce postoperative complications of bone and soft tissue. For elderly patients with severe comminuted and displaced fractures, osteoporosis, and unsuitable internal fixation, shoulder joint replacement is the best treatment option. Conclusion: Currently, there has been some advancement in the classification, vascular supply, and management of valgus impacted PHF. Nevertheless, further research is imperative to assess the clinical safety, biomechanical stability, and indication of minimally invasive technology.

Morphological characteristics and a new classification system of the inferior pole fracture of the patella: A computer-tomography-based study.

PURPOSE: The objective of this study was to measure the morphological characteristics of inferior pole fracture of the patella (IPFP) and develop a practical classification system to determine the corresponding treatment protocols for different IPFPs with specific patterns. METHODS: A retrospective radiographic review was performed on a series of 71 patients with IPFP. The preoperative CT data were collected and measured using image processing software. The number of fragments, maximum fracture fragment anteroposterior length (MFFAL), maximum fracture fragment transverse length (MFFTL), fracture fragment coronal angle (FFCA), fracture fragment sagittal angle (FFSA), maximum fracture fragment height (MFFH) and maximum transverse sectional area (MTSA) were analysed. RESULTS: The mean number of fracture fragments was 3.8. The average MFFAL was 14.9 mm, the average MFFTL was 23.5 mm, the average FFCA was 92.1°, the average FFSA was 93.0°, the average MFFH was 13.6 mm, and the average MTSA was 299.3 mm2. A new classification system was introduced to describe the varied patterns of IPFP, summarized as (I) simple IPFP; (II) comminuted IPFP; (III) simple IPFP with simple patellar body fracture; and (IV) comminuted patellar fracture involving the inferior pole. With the four-type classification system, 12 type I, 22 type II, 21 type III, and 16 type IV lesions were observed, each with specific morphological characteristics. CONCLUSION: Most IPFPs exhibited a diversiform pattern, demonstrating that coverage fixation was likely needed. The four-type classification system might offer a valuable approach to help orthopaedic surgeons make individual treatment plans.

The remnant axial cortical length of the proximal femur in pertrochanteric fractures: a three-dimensional computed tomography study and its clinical implications.

BACKGROUND: Cortical buttress are important factors for postoperative stable reconstruction of per/inter-trochanteric fractures. The study aimed to measure the remnant axial cortical length (RACL) of the proximal circumference of the femur, and to determine which part of the RACL can be used reliably to postoperatively sustain the head-neck fragment as a cortical support pattern. METHODS: Eighty patients with trochanteric hip fractures admitted from January 2015 to January 2016 were included in a retrospective study. Their pre-operative computed tomography (CT) images were used to form 3D-CT reconstructions via Mimics software. After simulated rotation and movement for fracture reduction, the RACL, its three component parts-namely, the remnant anterior cortex (RAC), remnant lateral cortex (RLC), and remnant posterior cortex (RPC) -the γ angle between the anterior and posterior cortex, and the Hsu's lateral wall thickness (LWT) were evaluated. RESULTS: Patients with an A1 fracture (21/80) had a longer RACL (88.8 ± 15.8 mm) than those with an A2 fracture (60.0 ± 11.9 mm; P < 0.01). The RAC, RLC, and RPC of the RACL in A1 fractures were also significantly longer than those in A2 fractures (P < 0.001). However, the most significant difference among the three components of the RACL was in the RPC, which was 27.3 ± 7.8 mm in A1 fractures and 9.2 ± 6.6 mm in A2 fractures. In addition, the coefficient of variation of the RAC was only 20.0%, while that of the RPC was 75.5%. The average γ angle in A1 fractures was 16.2 ± 13.1°, which was significantly smaller than that in A2 fractures, which was 40.3 ± 14.5° (P < 0.001). There was a significant statistical difference in the LWT between A1 and A2 fractures (P < 0.001). There were significant differences in the RACL, RAC, RLC, RPC, γ angle, and LWT among the five subtypes (P < 0.001). CONCLUSIONS: The RAC is relatively stable in pertrochanteric fractures. Fracture reduction through a RAC buttress may help to enhance the postoperative stable reconstruction of per/inter-trochanteric fractures and make possible good mechanical support for fracture healing.

The Impact of Banana-Shaped Fragments on Trochanteric Hip Fractures Treated by PFNA.

Background: Regarding trochanteric hip fractures, one type of posterior coronal fragments was described as the "banana-shaped fragment", while the impact of the banana-shaped fragment on mechanical stability has not been further studied. The current study investigated the association between the banana-shaped fragment and mechanical complications after surgery. Methods: This retrospective cohort study included 273 patients treated by proximal femoral nail antirotation (PFNA) in the full analysis. The age, the sex, the fracture side, the follow-up time, the American Society of Anesthesiologists classification, the operators, the fracture classification, the tip-apex distance, the blade positions, the reduction quality and the bone mineral density were analyzed in relation to mechanical complications, through univariate and multivariate approaches. Results: Mechanical complications happened in 33 patients. The banana-shaped fragment (adjusted odds ratio 5.240, 95% CI 2.172 to 12.641; p < 0.001), the tip-apex distance and the reduction quality showed significant association with mechanical complications in both univariate and multivariate analysis. Moreover, for 118 patients with the banana-shaped fragment, we found that the use of wire cerclage couldn't significantly lower the rates of mechanical complications (p = 0.648). Conclusions: The banana-shaped fragment had a negative impact on mechanical stability of trochanteric hip fractures treated by PFNA. In the perioperative period, the BSF should be carefully evaluated, and its specific handling deserves further study.

Characterization and the cholesterol-lowering effect of dietary fiber from fermented black rice (Oryza sativa L.).

Black rice was fermented with Neurospora crassa, after which the dietary fiber (DF) extracted from it was characterized and evaluated for its cholesterol-lowering effect in mice. The findings demonstrated that fermentation increased the level of soluble DF from 17.27% ± 0.12 to 29.69% ± 0.26 and increased the adsorption capacity of DF for water, oil, cholesterol, glucose and sodium cholate. The fermented DF had a more loose and porous structure than that extracted from unfermented rice. Additionally, feeding with DF from the fermented black rice significantly reduced body weight, lowered total cholesterol levels and improved the lipid profile in mice gavaged with a high dose (5 g per kg bw) or a low dose (2.5 g per kg·bw). ELISA showed that the hepatic expression of typical proteins and enzymes that are involved in cholesterol metabolism was regulated by the fermented rice DF, leading to reduced cholesterol production and increased cholesterol clearance. The fermented DF also modified the gut microbiota composition (e.g. Firmicutes reduced and Akkermansia increased), which promoted the production of short-chain fatty acids. In conclusion, fermentation can modify the structure and function of DF in black rice and the fermented dietary fiber has excellent cholesterol lowering effects possibly by cholesterol adsorption, cholesterol metabolism modulation, and intestinal microflora regulation.

Three-dimensional morphological study of type B lateral malleolar fractures with special reference to the end-tip location of proximal apexes.

Objective: We aimed to describe the morphological characteristics of Danis-Weber type B lateral malleolar fractures, with special attention given to the end-tip locations of fracture apexes, and to construct a 3D (three-dimensional) fracture line map. Methods: A total of 114 surgically treated cases of type B lateral malleolar fractures were retrospectively reviewed. The baseline data were collected, and computed tomography data were reconstructed in a 3D model. We measured the morphological characteristics and the end-tip location of the fracture apex on the 3D model. All the fracture lines were superimposed on a template fibula to generate a 3D fracture line map. Results: Among these 114 cases, 21 were isolated lateral malleolar fractures, 29 were bimalleolar fractures, and 64 were trimalleolar fractures. All the type B lateral malleolar fractures demonstrated a spiral or oblique fracture line. As measured from the distal tibial articular line, the fracture started at -6.22 ± 4.62 mm anteriorly and terminated at 27.23 ± 12.32 mm posteriorly, and the average fracture height was 33.45 ± 11.89 mm. The fracture line inclination angle was 56.85° ± 9.58°, and the total fracture spiral angle was 269.81° ± 37.09°, with fracture spikes of 156.20° ± 24.04°. The proximal end-tip location of the fracture apex was classified into four zones in the circumferential cortex: zone I (lateral ridge) in seven cases (6.1%), zone II (posterolateral surface) in 65 cases (57%), zone III (posterior ridge) in 39 cases (34.2%), and zone IV (medial surface) in three cases (2.6%). Altogether, 43% (49 cases) of fracture apexes were not distributed on the posterolateral surface of the fibula, as 34.2% (39 cases) were located on the posterior ridge (zone III). The aforementioned morphological parameters in fractures with zone III, sharp spikes, and further broken spikes were greater than those in zone II, blunt spikes, and fractures without further broken spikes. The 3D fracture map suggested that the fracture lines with the zone-III apex were steeper and longer than those with the zone-II apex. Conclusion: Nearly half of type B lateral malleolar fractures had their proximal end-tip of apexes not on the posterolateral surface, which may impair the mechanical application of antiglide plates. A steeper fracture line and longer fracture spike indicate a more posteromedial distribution of the fracture end-tip apex.

Positive medial cortical support versus anatomical reduction for trochanteric hip fractures: Finite element analysis and biomechanical testing.

BACKGROUND AND OBJECTIVES: The anatomical reduction (AR) is usually considered the best option for fractures. Nevertheless, in unstable trochanteric hip fractures (UTHF), previous clinical reports found that the positive medial cortical support (PMCS, an over-reduction technique) attained higher mechanical stability, but this challenging clinical finding still needs experimental validation. METHODS: This study constructed in-silico and biomechanical PMCS and AR models, with the use of the most clinically-representative geometry design of fracture models, the multi-directional design in FE analysis, and the subject-specific (osteoporotic) bone material properties, to make the models better mimic the actual condition in clinical settings. Then multiple performance variables (von-Mises stress, strain, integral axial stiffness, displacement, structural changes, etc.) were assessed to uncover details of integral and regional stability. RESULTS: Among in-silico comparison, PMCS models showed significantly lower maximum displacement than AR models, and the maximum von Mises stress of implants (MVMS-I) was significantly lower in PMCS models than in AR models (highest MVMS-I in -30°-A3-AR of 1055.80 ± 93.37 MPa). Besides, PMCS models had significantly lower maximum von Mises stress along fracture surfaces (MVMS-F) (highest MVMS-F in 30°-A2-AR of 416.40 ± 38.01 MPa). Among biomechanical testing comparison, PMCS models showed significantly lower axial displacement. Significantly lower change of neck-shaft angle (CNSA) was observed in A2-PMCS models. A fair amount of AR models converted into the obvious negative medial cortical support (NMCS) condition, whereas all PMCS models kept the PMCS condition. The results were also validated through comparison to previous clinical data. CONCLUSIONS: The PMCS is superior to the AR in the UTHF surgery. The current study opens up the second thought of the role of over-reduction technique in bone surgery.

Computational evaluation of the axis-blade angle for measurements of implant positions in trochanteric hip fractures: A finite element analysis.

BACKGROUND: Recently, a novel approach axis-blade angle (ABA) was developed to measure implant positions during trochanteric hip fracture surgery. It was defined as the sum of two angles α and ß measured between the femoral neck axis and helical blade axis in anteroposterior and lateral X-ray films, respectively. Although its clinical practicability has been confirmed, the mechanism is yet to be investigated by means of finite element (FE) analysis. METHODS: Computed tomography images of four femurs and dimensions of one implant at three angles were obtained to construct FE models. For each femur, 15 FE models in an arrangement (intramedullary nails at three angles multiplying five blade positions) were established. Under the simulation of normal walking loads, the ABA, von Mises stress (VMS), maximum/minimum principal strain and displacement were analyzed. RESULTS: When the ABA increased, all outcome indicators initially decreased till reaching inferior-middle site and then increased while the blade positions within the femoral head shifted from the superior-anterior quadrant toward the inferior-posterior quadrant, where the ABA were higher. Only the peak VMS of implant models in the inferior-posterior quadrant (particularly the inferior-middle site within) with blades in did not reach the yielding (risky) cut-off. CONCLUSIONS: From the perspective of angles, ABA, this study demonstrated the inferior-posterior quadrant as the relatively stable and safe regions, especially the inferior-middle site within. This was similar but more elaborate compared with previous studies and clinical practice. Therefore, ABA could be employed as a promising approach to anchor the implants into the optimal region.

A new posterosuperior screw placement strategy to avoid in-out-in screws in femoral neck fractures.

Objective: The inverted triangle configuration of the three cannulated screws is the classic fixation method most commonly performed for undisplaced femoral neck fractures in young and geriatric patients. However, the posterosuperior screw has a high incidence of cortical breach, known as an in-out-in (IOI) screw. In this study, we present a novel posterosuperior screw placement strategy to prevent the screw from becoming IOI. Methods: Using computed tomography data and image-processing software, 91 undisplaced femoral neck fractures were reconstructed. The anteroposterior (AP), lateral, and axial radiographs were simulated. To simulate the intraoperative screw placement process, participants used three screw insertion angles (0°, 10°, and 20°) to place the screw on the AP and lateral views of the radiograph according to the three established strategies. On the AP radiograph, a screw was placed abutting (strategy 1), 3.25 mm away from (strategy 2), or 6.5 mm away from (strategy 3) the superior border of the femoral neck. On the lateral radiograph, all the screws were placed abutting the posterior border of the femoral neck. Axial radiographs were used to evaluate the screw position. Results: In strategy 1, all the placed screws were IOI regardless of the screw insertion angle. In strategy 2, 48.3% (44/91) of IOI screws occurred at a 0° screw insertion angle, 41.7% (38/91) of IOI screws occurred at a 10° screw insertion angle, and 42.9% (39/91) of IOI screws occurred at a 20° screw insertion angle situation. In strategy 3, no IOI screw occurred, and the screw insertion angles did not affect the safety and accuracy of screw placement. Conclusions: Screws placed according to strategy 3 are safe. The reliability of this screw placement strategy is unaffected by a screw insertion angle of less than 20 degrees.