Cold-atmospheric-plasma activated-ice as a cooling medium with antimicrobial properties: Case study on fish fillet preservation.

The efficacy and applicability of Plasma Activated Ice (PAI) -produced by cold atmospheric plasma (CAP) technology- on microorganisms and quality characteristics of perishable fresh sea bream (Sparus aurata) fillets, were evaluated. The changes in microbiological load and quality characteristics of fish fillets were investigated during storage with ice from deionized water (Control), PAI and ice from artificially produced water (Artificial) of H2O2 concentrations equal to those of PAI. Fresh sea bream fillets were packed under ice flakes (produced from PAI or Artificial or Control) on layers (as typically done in the relevant industry) and stored at 0.5 °C for 27 days. PAI application inhibited significantly the growth of microbial load of the fillets resulting in reduced growth rates while simultaneously significantly retarded the quality deterioration compared to the other disinfectant media. The use of PAI (with 10 mg/L H2O2) led to a 11-day and 6-day extension, i.e., 2-fold and a âˆ¼ 1.5-fold extension, of the fillets shelf-life compared to the samples treated with Control and Artificial ice, respectively. The results proved the efficiency of PAI in extending the shelf-life of perishable foods during storage (or/and transportation), by validating its antimicrobial properties and cooling capacity.

Assessment of plant growth promoting bacteria strains on growth, yield and quality of sweet corn.

The use of plant growth promoting bacteria (PGPB) is increasingly gaining acceptance from all the stakeholders of the agricultural production. Different strains of PGPB species had been found to have a vast variety of mechanisms of action, while at the same time, affect differently a variety of crops. This study investigated the effectiveness of ten PGPB strains, on sweet corn cultivation under Mediterranean soil and climatic conditions. A field experiment that followed a completely randomized design was conducted at the region of Attica at Oropos. The results indicated that B. mojavensis increased yield by 16%, B. subtilis by 13.8%, B. pumilus by 11.8% and B. pseudomycoides by 9.8% compared to control. In addition, the harvested grains of the plants treated with B. mojavensis, B. subtilis and B. pumilus presented the highest values of protein and fiber content. Moreover, in most of the cases, high values of photosynthetic rate, transpiration rate and stomatal conductance during the cultivation period, resulted in high productivity. Regarding the texture, the size, the sphericity and the ash content of corn grains, it was found that they were not influenced by the application of different treatments of PGPB. The use of certain strains of PGPB, under specific soil and climatic conditions could contribute to better understand which strains are better suited to certain crops.

Evaluation of Plant Growth Promoting Bacteria Strains on Growth, Yield and Quality of Industrial Tomato.

Plant growth promoting bacteria (PGPB) are used as biostimulants to improve the growth and yield as well as the quality of crops. In the present study, nine strains of PGPB and one solid mix consisting of two of them were evaluated on the cultivation of industrial tomato under specific soil and climatic conditions. The results showed that Bacillus licheniformis treatment increased dry weight of the tomato plants by 39%, and the photosynthetic rate was increased by Priestia megaterium 9.9%. The application of Bacillus subtilis, Bacillus amyloliquefaciens, Priestia megaterium, and Bacillus licheniformis increased mean fruit weight per plant 26.78-30.70% compared to that of control. Yield per plant was increased 51.94% with the use of Bacillus licheniformis compared to that of control. The quality of the fruits in nearly every bacteria strain was improved. Bacillus pumilus and the mix of Priestia megaterium and Azotobacter chroococcum (1:1) increased the most total soluble solids in the tomato fruits (4.70° Brix), and Priestia megaterium increased content in lycopene and total carotenoids by 52.8% and 25%, respectively; Bacillus pseudomycoides increased Pectin methylesterase (PME) activity (24.94 units/mL), and Bacillusmojavensis, along with the mix of Priestia megaterium and Azotobacter chroococcum, increased Poligalacturonase (PG) activity the most (30.09 and 32.53 units/mL, respectively). Most of the bacteria strains presented an increased antioxidant activity significantly better that that of the control up to 31.25%. The results of this study confirmed that the use of PGPB as biostimulants can improve the yield and the quality of industrial tomato.

Novel Processes for the Extraction of Phenolic Compounds from Olive Pomace and Their Protection by Encapsulation.

Olive pomace, the solid by-product derived from olive oil production consists of a high concentration of bioactive compounds with antioxidant activity, such as phenolic compounds, and their recovery by applying innovative techniques is a great opportunity and challenge for the olive oil industry. This study aimed to point out a new approach for the integrated valorization of olive pomace by extracting the phenolic compounds and protecting them by encapsulation or incorporation in nanoemulsions. Innovative assisted extraction methods were evaluated such as microwave (MAE), homogenization (HAE), ultrasound (UAE), and high hydrostatic pressure (HHPAE) using various solvent systems including ethanol, methanol, and natural deep eutectic solvents (NADESs). The best extraction efficiency of phenolic compounds was achieved by using NADES as extraction solvent and in particular the mixture choline chloride-caffeic acid (CCA) and choline chloride-lactic acid (CLA); by HAE at 60 °C/12,000 rpm and UAE at 60 °C, the total phenolic content (TPC) of extracts was 34.08 mg gallic acid (GA)/g dw and 20.14 mg GA/g dw for CCA, and by MAE at 60 °C and HHPAE at 600 MPa/10 min, the TPC was 29.57 mg GA/g dw and 25.96 mg GA/g dw for CLA. HAE proved to be the best method for the extraction of phenolic compounds from olive pomace. Microencapsulation and nanoemulsion formulations were also reviewed for the protection of the phenolic compounds extracted from olive pomace. Both encapsulation techniques exhibited satisfactory results in terms of encapsulation stability. Thus, they can be proposed as an excellent technique to incorporate phenolic compounds into food products in order to enhance both their antioxidative stability and nutritional value.

Effect of foliar and soil application of plant growth promoting bacteria on growth, physiology, yield and seed quality of maize under Mediterranean conditions.

The use of plant growth promoting bacteria (PGPB) as biostimulants favors the increase of crop productivity and the improvement of yield quality. The main objective of the present study was to investigate the effect of the PGPB biostimulants (Azotobacter chroococcum, Bacillus subtilis, Bacillus megatherium and their mixes) and the application method (foliar and soil) on the growth, the physiology, the yield and the quality of maize. The obtained results showed that A. chroococcum treatment increased the chlorophyll content up to 6.1%, the photosynthetic rate up to 18.4% and the transpiration rate up to 34.3%. The highest maize yields were performed by the treatments B. megatherium (244.67 g) and the mix of A. chroococcum and B. subtilis (1:1) (243.67 g) when applied on the soil. The Soil application of the PGPB resulted in increased yield of maize from 5.5 to 13.4% compared to control treatment. Concerning quality characteristics, B. subtilis treatment increased total solids content in harvested maize seeds by 92%, as well as crude fiber content by 46% compared to control. The results confirmed that the use of PGPB could contribute as a new cultivation practice for sustainable growth, productivity and quality of grain crops.

Encapsulation of Olive Leaves Extracts in Biodegradable PLA Nanoparticles for Use in Cosmetic Formulation.

The aim of the current work was to encapsulate olive leaves extract in biodegradable poly(lactic acid) nanoparticles, characterize the nanoparticles and define the experimental parameters that affect the encapsulation procedure. Moreover, the loaded nanoparticles were incorporated in a cosmetic formulation and the stability of the formulation was studied for a three-month period of study. Poly(lactic acid) nanoparticles were prepared by the nanoprecipitation method. Characterization of the nanoparticles was performed using a variety of techniques: size, polydispersity index and ζ-potential were measured by Dynamic Light Scattering; morphology was studied using Scanning Electron Microscopy; thermal properties were investigated using Differential Scanning Calorimetry; whereas FT-IR spectroscopy provided a better insight on the encapsulation of the extract. Encapsulation Efficiency was determined indirectly, using UV-Vis spectroscopy. The loaded nanoparticles exhibited anionic ζ-potential, a mean particle size of 246.3 ± 5.3 nm (Pdi: 0.21 ± 0.01) and equal to 49.2%, while olive leaves extract release from the nanoparticles was found to present a burst effect at the first 2 hours. Furthermore, the stability studies of the loaded nanoparticles' cosmetic formulation showed increased stability compared to the pure extract, in respect to viscosity, pH, organoleptic characteristics, emulsions phases and grid.

Comparison of spray, freeze and oven drying as a means of reducing bitter aftertaste of steviol glycosides (derived from Stevia rebaudiana Bertoni plant)--Evaluation of the final products.

The aim of this study was to encapsulate the steviol glycosides (SGs) by spray, freeze and vacuum oven drying in order to minimise the bitter aftertaste of the SGs, as well as to improve their properties. Different ratios of maltodextrin to inulin as agents were examined, 80:20, 75:25, 70:30, 65:35 and 60:40, while the concentration of SGs in total solids was maintained constant at 2.5%. The obtained SGs products were evaluated by microencapsulation efficiency (MEE%), hygroscopicity, solubility, moisture content, structure (SEM, XRD), FT-IR and sensory properties. Significant differences in MEE%, moisture content, structure and solubility values were observed depending on the applied drying method. The reduced hygroscopicity values (20.26-26.67 g H2O/100g dry weight) contribute to improved stability. The FT-IR technique confirmed that SGs maintained their chemical integrity during the applied drying processes. The spray dried SGs products presented the best physicochemical characteristics and the most appealing sensorial ones.