RESUMO
Phase encoding in quantum key distribution (QKD) enables long-distance information-theoretic secure communication in optical fibers. We present a novel theoretical model characterizing errors from various sources in practical phase encoding-based QKD systems, namely the laser linewidth, detector dark counts, and channel dispersion. This model provides optimized optical pulse parameters and less distortion in pulses, which eliminates system imperfections and leads to a reduced quantum bit error rate (QBER) for practical QKD scenario. This analysis is applicable to various fiber-based phase and time encoding protocols. In particular, we implement this to a differential phase shift (DPS) QKD scheme operating at a 2.5 GHz clock, which produces a secure key rate of 193 bits/s at a fiber length of 265 km and an unprecedented QBER < 1[Formula: see text] up to 225 km length with standard telecom components. We show that by adjusting the quantum efficiency and dark count rates of detectors, proposed system can establish secure keys up to 380 km distance using standard telecom grade fiber with a QBER of 1.48%. Moreover, the system is compatible with existing optical fiber networks and capable of establishing a secure key exchange between two cities 432 km apart using ultra-low-loss (ULL) specialty fiber.
RESUMO
A new organic complex (ANNBA) was synthesized using the solvent-free, solid-state reaction involving anthranilamide (AN)-m-nitrobenzoic acid (NBA). The established phase diagram specifies the formation of a complex in a 1:1 stoichiometric ratio which melts congruently at 142 °C. The diagram also infers the formation of two eutectics, E1 and E2, on either side of the complex with their respective melting at 118 and 106 °C. The stability and novelty of the synthesized complex was confirmed by differential scanning calorimetry, powder X-ray diffraction, and spectroscopic FTIR, 1H, and 13C NMR studies. The significant thermodynamic parameters such as the heat of mixing, the entropy of fusion, the roughness parameter, the interfacial energy, and excess thermodynamic functions have been studied. The novel complex (ANNBA) material displayed intense fluorescent emission as compared to the parent and the other well-known fluorescent organic material "pyrene." The influence of solvent's polarity on the absorption and emission of the complex has been studied in different solvents. Herein, we have displayed remarkable affinity of the complex toward hexavalent chromium ions in water, affecting its fluorescent property. We have deployed the synthesized complex as a turn-off fluorescent sensor to detect the most hazardous hexavalent chromium ions in water for the first time.
RESUMO
Medicinal mushrooms have been used in various treatments from a very long time, among which, Ganoderma lucidum is one of the most important medicinal mushroom. It is cultivated worldwide to meet its ever-increasing demand in the market. It is generally cultivated by bed log (Sawdust) and wood log (billet) method. This study was an attempt to observe the growth performance of G. lucidum on poplar billets (Populus deltoides) in the Sherpur Village (Dehradun) and Manjgaun village (Tehri Garhwal) of Garhwal Himalaya, India. The farmers' field with empty house/ rooms having proper growing conditions especially humidity and light were used for the cultivation of G. lucidum. The G. lucidum spawn was inoculated in poplar wood billets and these billets were installed in well prepared soil. The results demonstrated that cropping cycle of G. lucidum was shorter (132-136 days) in Sherpur Village (Dehradun) as compared to Manjgaun village (141-145 days) in Tehri Garhwal. Further the results also revealed that yield was decreased in the subsequent flushes. In Village Sherpur, the fruiting bodies of G. lucidum were harvested between 64-66 days, 100-101 days and 135-136 days during first, second and third flush after the installation of billets, respectively. However; in village Manjgaun, the fruiting bodies of G. lucidum were harvested between 69 and 71 days, 107-108 days and 144-145 days in first, second and third after the installation of billets respectively. Warmer temperature in Village Sherpur resulted in the early emergence and development of the fruiting bodies as compared to village Manjgaun where pinhead and fruiting body development was delayed due to the lower temperature during cropping cycle.
RESUMO
The availability of Airborne Visible and Infrared Imaging Spectrometer-Next Generation (AVIRIS-NG) data has enormous possibilities for quantification of Leaf Chlorophyll Content (LCC). The present study used the AVIRIS-NG campaign site of Western India for generation and validation of new chlorophyll indices by denoising the AVIRIS-NG data. For validation, concurrent to AVIRIS-NG flight overpass, field samplings were performed. The acquired AVIRIS-NG was subjected to Spectral Angle Mapper (SAM) classifier for discriminating the crop types. Three smoothing techniques i.e., Fast-Fourier Transform (FFT), Mean and Savitzky-Golay filters were evaluated for their denoising capability. Raw and filtered data was used for developing new chlorophyll indices by optimizing AVIRIS-NG bands using VIs based on parametric regression algorithms. In total, 20 chlorophyll indices and corresponding 20 models were developed for mapping LCC in the area. SAM identified 17 crop types in the area, while FFT found to be the best for filtering. Performance of these models when checked based on Pearson correlation coefficient (r) and Centered Root Mean Square Difference (CRMSD), indicated that LCC-CCI10 based on normalized difference type index formed through Near Infrared band and blue band is the best estimator of LCC (rcal = 0.73, rval = 0.66, CRMSD = 4.97). The approach was also tested using AVIRIS-NG image of the year 2018, which also showed a promising correlation (r = 0.704, CRSMD = 8.98, Bias = -0.5) between modeled and field LCC.
RESUMO
Adenosine A2A receptor (A2AAdoR) antagonism is a nondopaminergic approach to Parkinson's disease treatment that is under development. Earlier we had reported the therapeutic potential of 7-methoxy-4-morpholino-benzothiazole derivatives as A2AAdoR antagonists. We herein described a novel series of [1,2,4]triazolo[5,1-f]purin-2-one derivatives that displays functional antagonism of the A2A receptor with a high degree of selectivity over A1, A2B, and A3 receptors. Compounds from this new scaffold resulted in the discovery of highly potent, selective, stable, and moderate brain penetrating compound 33. Compound 33 endowed with satisfactory in vitro and in vivo pharmacokinetics properties. Compound 33 demonstrated robust oral efficacies in two commonly used models of Parkinson's disease (haloperidol-induced catalepsy and 6-OHDA lesioned rat models) and depression (TST and FST mice models).
RESUMO
Multipronged approach was used to synthesize a library of diverse C-8 cyclopentyl hypoxanthine analogs from a common intermediate III. Several potent and selective compounds were identified and evaluated for pharmacokinetic (PK) properties in Wistar rats. One of the compounds 14 with acceptable PK parameters was selected for testing in in vivo primary acute diuresis model. The compound demonstrated significant diuretic activity in this model.
Assuntos
Antagonistas do Receptor A1 de Adenosina/química , Antagonistas do Receptor A1 de Adenosina/farmacologia , Hipoxantinas/química , Hipoxantinas/farmacologia , Antagonistas do Receptor A1 de Adenosina/síntese química , Antagonistas do Receptor A1 de Adenosina/farmacocinética , Animais , Espectroscopia de Ressonância Magnética Nuclear de Carbono-13 , Cromatografia Líquida , Desenho de Fármacos , Células HEK293 , Humanos , Hipoxantinas/síntese química , Hipoxantinas/farmacocinética , Masculino , Espectrometria de Massas , Espectroscopia de Prótons por Ressonância Magnética , Ensaio Radioligante , Ratos , Ratos WistarRESUMO
Our initial structure-activity relationship studies on 7-methoxy-4-morpholino-benzothiazole derivatives featured by aryloxy-2-methylpropanamide moieties at the 2-position led to identification of compound 25 as a potent and selective A2A adenosine receptor (A2AAdoR) antagonist with reasonable ADME and pharmacokinetic properties. However, poor intrinsic solubility and low to moderate oral bioavailability made this series unsuitable for further development. Further optimization using structure-based drug design approach resulted in discovery of potent and selective adenosine A2A receptor antagonists bearing substituted 1-methylcyclohexyl-carboxamide groups at position 2 of the benzothiazole scaffold and endowed with better solubility and oral bioavailability. Compounds 41 and 49 demonstrated a number of positive attributes with respect to in vitro ADME properties. Both compounds displayed good pharmacokinetic properties with 63% and 61% oral bioavailability, respectively, in rat. Further, compound 49 displayed oral efficacy in 6-OHDA lesioned rat model of Parkinson diseases.
Assuntos
Antagonistas do Receptor A2 de Adenosina/farmacologia , Benzotiazóis/farmacologia , Cicloexanóis/farmacologia , Receptor A2A de Adenosina/metabolismo , Antagonistas do Receptor A2 de Adenosina/síntese química , Antagonistas do Receptor A2 de Adenosina/farmacocinética , Administração Oral , Animais , Antiparkinsonianos/síntese química , Antiparkinsonianos/farmacocinética , Antiparkinsonianos/farmacologia , Benzotiazóis/síntese química , Benzotiazóis/farmacocinética , Cicloexanóis/síntese química , Cicloexanóis/farmacocinética , Desenho de Fármacos , Células HEK293 , Humanos , Levodopa/farmacologia , Masculino , Microssomos Hepáticos/metabolismo , Simulação de Acoplamento Molecular , Ratos Wistar , Relação Estrutura-AtividadeRESUMO
To tailor the nanomorphology in polymer/fullerene blends, we study the effect of electrostatic field (E-field) on the solidification of poly(3-hexylthiophene-2, 5-diyl) (P3HT):[6,6]-phenyl-C61-butyric acid methyl ester (PC60BM) bulk heterojunction (BHJ). In addition to control; wet P3HT:PC60BM thin films were exposed to E-field of Van de Graaff (VDG) generator at three different directions-horizontal (H), tilted (T), and vertical (V)-relative to the plane of the substrate. Surface and bulk characterizations of the field-treated BHJs affirmed that fullerene molecules can easily penetrate the spaghetti-like P3HT and move up and down following the E-field. Using E-field treatment, we achieved favorable morphologies with efficient charge separation, transport, and collection. We improve; (1) the hole mobility values up to 19.4 × 10-4 ± 1.6 × 10-4 cm2 V-1 s-1 and (2) the power conversion efficiency (PCE) of conventional and inverted OPVs up to 2.58 ± 0.02% and 4.1 ± 0.40%, respectively. This E-field approach can serve as a new morphology-tuning technique, which is generally applicable to other polymer-fullerene systems.
RESUMO
The performance of organic photovoltaic devices is improving steadily and efficiencies have now exceeded 10%. However, the incident solar spectrum still largely remains poorly absorbed. To reduce optical losses, we employed a microlens array (MLA) layer on the side of the glass substrate facing the incident light; this approach does not interfere with the processing of the active-layer. We observed up to 10% enhancement in the short circuit current of poly({4,8-bis[(2-ethylhexyl)oxy]benzo[1,2-b:4,5-b']dithiophene-2,6-diyl}{3-fluoro-2-[(2-ethylhexyl)carbonyl] thieno[3,4-b]thiophenediyl}):(6,6)-phenyl C71-butyric acid methyl ester (PTB7:PC71BM) OPV cells. Theoretically and experimentally investigating several MLA dimensions, we found that photocurrent increases with the ratio of the height to the pitch size of MLA. Simulations reveal the enhancement mechanisms: MLA focuses light, and also increases the light path within the active-layer by diffraction. Photocurrent enhancements increase for a polymer system with thinner active-layers, as demonstrated in poly[N-9'-heptadecanyl-2,7-carbazole-alt-5,5-(4',7'-di-2-thienyl-2',1',3'-benzothiadiazole)] (PCDTBT):PC71BM OPVs with 17% improvement in short circuit current.
RESUMO
Fourier transform (FT)-plasmon waveguide resonance (PWR) spectroscopy measures light reflectivity at a waveguide interface as the incident frequency and angle are scanned. Under conditions of total internal reflection, the reflected light intensity is attenuated when the incident frequency and angle satisfy conditions for exciting surface plasmon modes in the metal as well as guided modes within the waveguide. Expanding upon the concept of two-frequency surface plasmon resonance developed by Peterlinz and Georgiadis [Opt. Commun. 1996, 130, 260], the apparent index of refraction and the thickness of a waveguide can be measured precisely and simultaneously by FT-PWR with an average percent relative error of 0.4%. Measuring reflectivity for a range of frequencies extends the analysis to a wide variety of sample compositions and thicknesses since frequencies with the maximum attenuation can be selected to optimize the analysis. Additionally, the ability to measure reflectivity curves with both p- and s-polarized light provides anisotropic indices of refraction. FT-PWR is demonstrated using polystyrene waveguides of varying thickness, and the validity of FT-PWR measurements are verified by comparing the results to data from profilometry and atomic force microscopy (AFM).
Assuntos
Técnicas de Química Analítica/instrumentação , Polímeros/química , Poliestirenos/química , Refratometria , Espectroscopia de Infravermelho com Transformada de FourierRESUMO
Parkinson's disease (PD) is a very serious neurological disorder, and current methods of treatment fail to achieve long-term control. Previous studies suggest that stimulation of the metabotropic glutamate receptor 4 (mGluR4) represents a promising new approach to the symptomatic treatment of Parkinson's disease (PD). Preclinical models using both agonists and positive allosteric modulators of mGluR4 have demonstrated the potential for this receptor for the treatment of PD. In the present study, we describe the pharmacological characterization of an mGluR4 PAM, N-(2, 4-dichlorophenyl) pyridine-2-carboxamide (TAS-4), in several rodent PD models. TAS-4 is a potent and selective mGluR4 PAM of the human mGluR4 receptor (EC50- 287.8nM). TAS-4 showed efficacy alone or when administered in combination with l-DOPA. When administered alone, TAS-4 exhibited efficacy in reversing haloperidol-induced catalepsy. In addition, acute TAS-4 dose-dependently potentiated contralateral turning behavior induced by a threshold dose of l-3,4-dihydroxyphenylalanine (l-DOPA, 4mg/kg i.p.), a classical test for antiparkinson drug screening. Subchronic (28days, twice a day) TAS-4 (10mg/kg i.p.)+l-DOPA (4mg/kg i.p.) did not induce sensitization to turning behavior or abnormal involuntary movements during the course of treatment. Moreover, subchronic administration of a fully effective dose of l-DOPA (8mg/kg i.p.) significantly induces sensitization to turning behavior or abnormal involuntary movements. Results showed that TAS-4, in association with a low dose of l-DOPA, displayed antiparkinsonian activity similar to that produced by a full dose of l-DOPA without exacerbating abnormal motor side effects.
RESUMO
In organic electronic devices, indium tin oxide (ITO) and poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) are the most common transparent electrode and anodic buffer layer materials, respectively. A widespread concern is that PEDOT:PSS is acidic and etches ITO. We show that this issue is not serious: only a few nanometers of ITO are etched in typical device processing conditions and storage thereafter; conductivity losses are affordable; and optical transmission gains further offset these losses. Organic photovoltaic (OPV) devices fabricated on old ITO (with PEDOT:PSS history) were similar or higher in efficiency than devices on fresh ITO. Poly[[4,8-bis[(2-ethylhexyl)oxy]benzo[1,2-b:4,5-b']dithiophene-2,6-diyl][3-fluoro-2-[(2-ethylhexyl)carbonyl]thieno[3,4-b]thiophenediyl]] (PTB7) devices on old ITO showed efficiencies up to 9.24% compared to 8.72% efficient devices on fresh ITO. This reusability of ITO can be impactful for economics of organic electronics because ITO accounts for almost 90% of energy embedded in devices, such as OPVs.
RESUMO
Interest in realizing conjugated polymer-based films with controlled morphology for efficient electronic devices, including photovoltaics, requires a parallel effort to characterize these films. Scanning angle (SA) Raman spectroscopy is applied to measure poly(3-hexylthiophene) (P3HT):phenyl-C61-butyric acid methyl ester (PCBM)-blend morphology on sapphire, gold, and indium tin oxide interfaces, including functional organic photovoltaic devices. Nonresonant SA Raman spectra are collected in seconds with signal-to-noise ratios that exceed 80, which is possible due to the reproducible SA signal enhancement. Raman spectra are collected as the incident angle of the 785 nm excitation laser is precisely varied upon a prism/sample interface from approximately 35 to 70°. The width of the â¼1447 cm(-1) thiophene CâC stretch is sensitive to P3HT order, and polymer order varied depending on the underlying substrate. This demonstrates the importance of performing the spectroscopic measurements on substrates and configurations used in the functioning devices, which is not a common practice. The experimental measurements are modeled with calculations of the interfacial mean square electric field to determine the distance dependence of the SA Raman signal. SA Raman spectroscopy is a versatile method applicable whenever the chemical composition, structure, and thickness of interfacial polymer layers need to be simultaneously measured.
RESUMO
Over the last decade, polymer solar cells (PSCs) have attracted a lot of attention and highest power conversion efficiencies (PCE) are now close to 10%. Here we employ an optical structure - the microlens array (MLA) - to increase light absorption inside the active layer, and PCE of PSCs increased even for optimized devices. Normal incident light rays are refracted at the MLA and travel longer optical paths inside the active layers. Two PSC systems - poly(3-hexylthiophene-2,5-diyl):(6,6)-phenyl C61 butyric acid methyl ester (P3HT:PCBM) and poly[[9-(1-octylnonyl)-9H-carbazole-2,7-diyl]-2,5-thiophenediyl-2,1,3-benzothiadiazole-4,7-diyl-2,5-thiophenediyl]:(6,6)-phenyl C71 butyric acid methyl ester (PCDTBT:PC70BM) - were investigated. In the P3HT:PCBM system, MLA increased the absorption, absolute external quantum efficiency, and the PCE of an optimized device by â¼4.3%. In the PCDTBT:PC70BM system, MLA increased the absorption, absolute external quantum efficiency, and PCE by more than 10%. In addition, simulations incorporating optical parameters of all structural layers were performed and they support the enhancement of absorption in the active layer with the assistance of MLA. Our results show that utilizing MLA is an effective strategy to further increase light absorption in PSCs, in which optical losses account for â¼40% of total losses. MLA also does not pose materials processing challenges to the active layers since it is on the other side of the transparent substrate.
RESUMO
A novel architecture has been employed to fabricate transparent electrodes with high conductivity and high optical transmittance at high incident angles. Soft lithography is used to fabricate polymer grating patterns onto which thin metallic films are deposited. Etching removes excess metal leaving tall walls of metal. Polymer encapsulation of the structure both protects the metal and minimizes diffraction. Transmission is dependent upon the height of the walls and encapsulation and varies from 60% to 80% for structures with heights of 1400 nm to 300 nm. In encapsulated structures, very little distortion is visible (either parallel to or perpendicular to standing walls) even at viewing angles 60° from the normal. Diffraction is at characterized through measurement of intensity for zeroth through third order diffraction spots. Encapsulation is shown to significantly reduce diffraction. Measurements are supported by optical simulations.
Assuntos
Eletrodos , Nanopartículas Metálicas/química , Nanopartículas Metálicas/ultraestrutura , Nanotecnologia/instrumentação , Refratometria/instrumentação , Desenho de Equipamento , Análise de Falha de Equipamento , Luz , Fotografação , Espalhamento de RadiaçãoRESUMO
3,7-Diiodo-2,6-di(thiophen-2-yl)benzo[1,2-b:4,5-b']difurans are efficiently prepared by an iodine-promoted double cyclization. This new heterocyclic core is readily modified by the attachment of alkyl chains for improved solubility. The use of these compounds for the synthesis of new conjugated polymers is also reported.
RESUMO
The authors investigate light absorption in organic solar cells in which indium tin oxide (ITO) is replaced by a new metallic architecture (grating) as a transparent electrode. Different from typical metal nanowire gratings, our gratings consist of metal nanowalls with nanoscale footprint and (sub)microscale height [Adv. Mater. 23, 2469 (2011)], thus ensuring high optical transmittance and electrical conductivity. Simulations reveal that a broadband and polarization-insensitive light absorption enhancement is achieved via two mechanisms, when such silver nanowall gratings are employed in P3HT:PCBM based solar cells. Overall absorption enhanced by ~23% compared to a reference cell with ITO electrode.
Assuntos
Fontes de Energia Elétrica , Metais/química , Microeletrodos , Nanotecnologia/instrumentação , Refratometria/instrumentação , Energia Solar , Absorção , Desenho de Equipamento , Análise de Falha de Equipamento , Luz , Espalhamento de RadiaçãoRESUMO
Herein, the implications of silicone contamination found in solution-processed conjugated polymer solar cells are explored. Similar to a previous work based on molecular cells, we find this contamination as a result of the use of plastic syringes during fabrication. However, in contrast to the molecular case, we find that glass-syringe fabricated devices give superior performance than plastic-syringe fabricated devices in poly(3-hexylthiophene)-based cells. We find that the unintentional silicone addition alters the solution's wettability, which translates to a thinner, less absorbent film on spinning. With many groups studying the effects of small-volume additives, this work should be closely considered as many of these additives may also directly alter the solutions' wettability, or the amount of silicone dissolved off the plastic syringes, or both. Thereby, film thickness, which generally is not reported in detail, can vary significantly from device to device.
Assuntos
Plásticos/química , Silicones/química , Energia Solar , Tiofenos/química , Vidro/química , Poliestirenos/química , Compostos de Estanho/químicaRESUMO
Peroxisome proliferator-activated receptor (PPAR) γ is known to be a key regulator of insulin resistance. We characterized the pharmacological profiles of NS-1 chemically known as (5Z)-5-[4-hydroxy-3-methoxy-phenyl) methylene] thiazolidine-2, 4-dione), as a selective partial activator of PPARγ. In transient transactivation assay in NIH3T3 cells, NS-1 showed a partial activation against human PPARγ with an EC (50) of 0.91 µM without activating human PPARα and PPARδ. In adipocyte differentiation assay, NS-1 induced adipocyte differentiation, which was ~25-fold weaker inducer of GPDH activities than pioglitazone and also showed weak adipogenic activity in C3H10T1/2 pluripotent stem cells using Oil Red O staining. NS-1 showed good in vivo pharmacokinetic profiles in C57BL/6J mice at 30 mg/kg oral dose with Cmax-26 µM, terminal elimination half-life- 2.5h and bioavailability of 85%. Furthermore, NS-1 significantly improved hyperglycemia and insulin resistance in DIO animals when orally administered at a dose of 30 mg/kg/day for 45 days without significant weight gain. Overall, these studies suggest that NS-1 improves insulin resistance in such animal models through activation of PPARγ-mediated transcriptional activity and that it would be a new therapeutic candidate with potential for the treatment of type 2 diabetic patients.