Biomechanical study of 3D-printed titanium alloy pad for repairing glenoid bone defect.

Background: The purpose of this study was to investigate the effect of 3D-printed technology to repair glenoid bone defect on shoulder joint stability. Methods: The shoulder joints of 25 male cadavers were tested. The 3D-printed glenoid pad was designed and fabricated. The specimens were divided into 5 groups. Group A: no bone defect and the structure of the glenoid labrum and joint capsule was intact; Group B: Anterior inferior bone defect of the shoulder glenoid; Group C: a pad with a width of 2 mm was installed; Group D: a pad with a width of 4 mm was installed; Group E: a pad with a width of 6 mm was installed. This study measured the distance the humeral head moved forward at the time of glenohumeral dislocation and the maximum load required to dislocate the shoulder. Results: The shoulder joint stability and humerus displacement was significantly lower in groups B and C compared with group A (p < .05). Compared with group A, the stability of the shoulder joint of group D was significantly improved (p < .05). However, there was no significant difference in humerus displacement between groups D and A (p > .05). In addition, compared with group A, shoulder joint stability was significantly increased and humerus displacement was significantly decreased in group E (p < .05). Conclusion: The 3D-printed technology can be used to make the shoulder glenoid pad to perfectly restore the geometric shape of the shoulder glenoid articular surface. Moreover, the 3D-printed pad is 2 mm larger than the normal glenoid width to restore the initial stability of the shoulder joint.

Reconstruction of recurrent shoulder dislocation with glenoid bone defect with 3D-printed titanium alloy pad: outcomes at 2-year minimum follow-up.

BACKGROUND: To evaluate the outcome of shoulder arthroscopy-assisted implantation of three-dimensional (3D)-printed titanium pads for recurrent shoulder dislocation with glenoid bone defects. METHODS: From June 2019 to May 2020, the clinical efficacy of 3D printed titanium pad implantation assisted by shoulder arthroscopy, for the treatment of recurrent shoulder dislocations with shoulder glenoid defects was retrospectively analyzed. The American Shoulder and Elbow Surgeons (ASES) shoulder, Rowe, and Constant scores were recorded before surgery and at 3 months, 6 months, 1 year, and 2 years after surgery. 3D computed tomography (CT) and magnetic resonance imaging were used to evaluate the location of the glenoid pad, bone ingrowth, joint degeneration, and osteochondral damage. RESULTS: The mean age of the 12 patients was 21.4 (19-24) years and the mean follow-up time was 27.6 (24-35) months. The Visual Analog Scale score significantly improved from 5.67 ± 1.98 preoperatively to 0.83 ± 0.58 postoperatively (p = 0.012). The postoperative ASES score was significantly increased to 87.91 ± 3.47 compared with preoperative ASES score (46.79 ± 6.45) (p < 0.01). Rowe and Constant scores also improved from 22.5 ± 12.34 and 56.58 ± 7.59 preoperatively to 90.83 ± 4.69 and 90.17 ± 1.89 at 2 years postoperatively, respectively. CT performed 2 years after surgery showed that the pad perfectly replenished the bone-defective part of the shoulder glenoid and restored the articular surface curvature of the shoulder glenoid in the anterior-posterior direction, and the bone around the central riser of the pad was tightly united. Magnetic resonance imaging 2 years after surgery showed that the humeral head osteochondral bone was intact, and there was no obvious osteochondral damage. CONCLUSIONS: 3D printed titanium pads are a reliable, safe, and effective surgical procedure for treating recurrent shoulder dislocations with glenoid bone defects.

Extracellular Vesicles from Neural Stem Cells Carry microRNA-16-5p to Reduce Corticosterone-induced Neuronal Injury in Depression Rats.

OBJECTIVE: Depression is a common mental illness. Neural stem cell-derived extracellular vesicles (NSC-EVs) are involved in repairing neuronal injury. We estimated the mechanism of miR-16-5p in depression rats. METHODS: EVs were extracted from NSCs. The depression rat model was established by corticosterone (CORT) induction and treated with NSC-EVs. The depression behavioral/pathological changes in rats were assessed using forced swimming test, open field test, sucrose consumption test and western blotting. The neuronal apoptosis in hippocampal tissue were detected. CORT-induced PC12 cell model was established. EV uptake by PC12 cells was measured and PC12 cell apoptosis was detected. The downstream targets of miR-16-5p were predicted and verified. The expressions of miR-16-5p and MYB in rats, PC12 cells, and EVs were measured. Functional rescue experiments were conducted to verify the role of miR-16-5p and MYB in PC12 cell apoptosis. RESULTS: CORT induction increased neuronal apoptosis in hippocampal tissue and induced depression-like behaviors in rats, while NSC-EV treatment improved depression-like behaviors and apoptosis in rats. In PC12 cells, NSC-EVs decreased CORT-induced PC12 cell apoptosis. NSC-EVs carried miR-16-5p into PC12 cells. miR-16-5p knockdown in EVs partially reversed the inhibitory effects of NSC-EVs on CORT-induced PC12 cell apoptosis. miR-16-5p targeted to inhibit MYB to repress CORT-induced PC12 cell apoptosis. In vivo experiments further verified that NSC-EVs reduced neuronal injury in CORT-induced depression rats via the miR-16-5p/MYB axis. CONCLUSION: NSC-EVs-mediated alleviation on neuronal injury by carrying miR-16-5p to target MYB was highly likely one of the mechanisms by which NSC-EVs mediated miR-16-5p in neuroprotection of depression rats.

Tryptamine-functionalized magnetic nanoparticles for highly sensitive detection of Salmonella typhimurium.

There is significant demand for the development of rapid, sensitive, and specific methods for detecting bacterial pathogens in order to identify the causes of food poisoning. Nucleic acid amplification tests (NAATs) allow for the culture-free detection of bacterial pathogens and are not as labor intensive and time consuming as culture-based detection methods. However, suitable sample preparation methods must be developed for the realization of simple, rapid, and sensitive NAATs. To resolve this problem, we developed a new sample preparation method that integrates bacterial pathogen enrichment and DNA extraction. We engineered magnetic nanoparticles (MNPs) with a physicochemical probe (tryptamine) for single-tube sample preparation with minimal sample loss. The tryptamine-functionalized MNPs (Indole@MNPs) showed inherent hydrophobicity owing to the indole side chain and a change in their zeta potential with a decrease in the pH. Because of their physicochemical characteristics, the Indole@MNPs could adsorb bacterial pathogens, thus allowing sample enrichment and DNA binding and release through weak electrostatic interactions via pH control. We successfully detected Salmonella enterica serovar Typhimurium, a common cause of bacterial food poisoning, at a concentration of 10 CFU/10 mL in milk samples using quantitative PCR. Thus, the proposed method allows for the simple and sensitive detection of Salmonella typhimurium and can be used for nontyphoidal salmonella detection to ensure food safety.

A single-tube sample preparation method based on a dual-electrostatic interaction strategy for molecular diagnosis of gram-negative bacteria.

A single-tube method based on a dual-electrostatic interaction (EI) strategy for bacteria capture and DNA extraction was designed to enable the highly sensitive detection of nucleic acids. Specially designed magnetic nanoparticles were developed to meet the opposing requirements of a single-tube method, which exist between the strong EI required for efficient bacteria capture and the weak EI required for DNA extraction with minimal DNA adsorption. A dual-EI strategy for the single-tube (DESIGN) method was thus developed to integrate bacteria enrichment, bacteria cell lysis, and DNA recovery in a single tube, thereby minimizing precious sample loss and reducing handling time. Subsequently, we evaluated the performance with a variety of concentrations from 5 to 100 colony-forming units (CFU)/10 mL human urine and milk samples. The DESIGN method achieved the simple and sensitive detection of Salmonella enterica serovar Typhimurium in 10 mL of human urine and milk samples up to 5 CFU by quantitative PCR. Furthermore, the DESIGN method detected Brucella ovis and Escherichia coli from 10 mL of human urine with a detection limit up to 5 CFU/10 mL. Graphical abstract.

The complete mitochondrial genome sequence of Schizothorax griseus (Cypriniformes: Cyprinidae).

In this study, the complete mitochondrial genome (mtDNA) of Schizothorax griseus was sequenced. The mitogenome is 16,586 bp in length, composed of 13 protein-coding genes, two rRNA genes, 22 tRNA genes, and two non-coding regions. The phylogenetic relationship constructed by Bayesian inference (BI) method showed that schizothorax is not a monophyly, species in the same river express a more close relationship. The results can contribute to explore the high level of diversification and the taxonomic conflict caused by morphologic characters of schizothorax, also, it will be an evidence for the biogeography and evolutionary mechanisms of Schizothoracinae fishes.

Synergistic Effects in Nanoengineered HNb3O8/Graphene Hybrids with Improved Photocatalytic Conversion Ability of CO2 into Renewable Fuels.

Layered HNb3O8/graphene hybrids with numerous heterogeneous interfaces and hierarchical pores were fabricated via the reorganization of exfoliated HNb3O8 nanosheets with graphene nanosheets (GNs). Numerous interfaces and pores were created by the alternative stacking of HNb3O8 nanosheets with limited size and GNs with a buckling and folding feature. The photocatalytic conversation of CO2 into renewable fuels by optimized HNb3O8/G hybrids yields 8.0-fold improvements in CO evolution amounts than that of commercial P25 and 8.6-fold improvements than that of HNb3O8 bulk powders. The investigation on the relationships between microstructures and improved photocatalytic performance demonstrates that the improved photocatalytic performance is attributed to the exotic synergistic effects via the combination of enhanced specific BET surface area, increased strong acid sites and strong acid amounts, narrowed band gap energy, depressed electron-hole recombination rate, and heterogeneous interfaces.