Copper-catalyzed tandem cyclization reaction of ethynylbenzoxazinones and thiols: facile construction of 2-thiomethylene indoles.

The first successful copper-catalyzed decarboxylative cyclization reaction of ethynylbenzoxazinones and thiols has been developed. A rarely studied α-addition process to a copper-allenylidene intermediate promoted this reaction. Using this protocol, a range of 2-thiomethylene indole compounds have been obtained. This methodology offers significant advantages including mild reaction conditions, cheap catalysts, good yields and broad substrate compatibility.

Expanded gray matter atrophy with severity stages of adult comorbid insomnia and sleep apnea.

OBJECTIVE: To investigate gray matter volume (GMV) changes in patients with comorbid insomnia and sleep apnea (COMISA) of differing severity and relationships between GMV alterations and clinical measures. METHODS: Thirty-four COMISA patients and 24 healthy controls (HC) were recruited. All patients underwent structural MRI and completed measures related to respiration, sleep, mood, and cognition. COMISA patients were further divided into a mild and moderate COMISA (MC) and a severe COMISA (SC) group. Changes in GMV of COMISA patients were investigated via VBM. The voxel-wise differences in GMV were compared between HC group and COMISA group. Analysis of covariance (ANCOVA) was performed on individual GMV maps in MC, SC, and HC groups to further investigate effects of different stages of COMISA severity on GMV. Partial correlation analysis was then performed to analyze relationships between altered GMV and clinical measures. RESULTS: GMV atrophy was mainly located in the temporal lobes and fusiform gyrus in COMISA group. The post-hoc analysis of the ANCOVA revealed temporal lobes and fusiform gyrus atrophy in MC and SC groups compared to HC and the temporal lobe atrophy was expanded in SC group based on cluster size. Moreover, the SC group showed GMV atrophy of the right amygdala compared to both MC and HC groups. Partial correlation analysis revealed positive relationships between the GMV and mood-and cognitive-related measures and negative correlation between GMV and respiration measure. CONCLUSIONS: Our findings showed GMV atrophy expansion from temporal lobe to limbic system (right amygdala) as severity stages increase in COMISA patients. These findings contribute to our understanding of neurobiological mechanisms underlying different stages of severity in COMISA patients.

Fabrication and Characterization of Ce3+-Doped Lithium Alumino-Silicate Scintillating Glass-Ceramic and Fiber.

Ce3+-doped lithium alumino-silicate (Li-Al-Si) scintillating glass was prepared using a melting method and crystallized via heat treatment. X-ray diffraction and transmission electron microscopy confirmed the presence of nanocrystals in the materials. Radioluminescence spectra, obtained by X-ray excitation, and luminescence spectra, obtained by 338 nm excitation, showed that the luminescence intensity increased after crystallization. The glass was combined with pure silica as the inner cladding to fabricate a hybrid fiber core using a melt-in-tube technique. The composition of the fiber core was examined using an electron probe microanalyzer. The glass fiber produced strong blue luminescence under UV excitation. After a micro-crystallizing heat treatment of the hybrid fiber at 850 °C in a reducing atmosphere, a Ce3+-doped lithium alumino-silicate glass-ceramic scintillating hybrid fiber was obtained. The nanocrystal structure of the fiber core was examined using micro-Raman spectroscopy. Excitation and luminescence spectra of the hybrid fiber before and after micro-crystallization were measured using microspectrofluorimetry. The results demonstrated that the fiber remained luminous after micro-crystallization. Hence, this work provides a new way to prepare scintillating glass-ceramic hybrid fibers for neutron detection.

Carbon Nanosheet Preparation By Low-Temperature Two-Step Carbonization: A Study of Their Properties and Mechanism of Adsorption of Oxidized H2S.

Straw, as a kind of biomass waste, has the advantages of low cost and abundant storage, which makes it a promising renewable resource. Using rice straw as a carbon source, carbon nanosheets were prepared by a two-step carbonization method combining low-temperature pyrolysis and low-temperature hydrothermal, and they were used as H2S removal agents. The results showed that during the two-step carbonization process, the adsorption performance of carbon nanosheets for H2S showed a tendency of enhancing and then weakening with the increase of pyrolysis temperature in the first step, and the sulfur capacity could reach 3.1 mg/g at the maximum of the pyrolysis temperature of 200 °C, which was superior to or close to that of the modified or activated carbon. The XPS, EPR, and CO2-TPD tests showed that the surface of carbon nanosheets was alkaline, containing a large number of hydroxyl groups and the presence of phenoxy persistent free radicals or semiquinone persistent free radicals. It was analyzed that the direct or indirect oxidation of H2S by the persistent radicals under an alkaline environment could convert the -2-valent sulfur into -1-, 0- and +6-valent sulfur to realize the adsorption and removal of H2S. This work, while offering the possibility of utilizing carbon nanosheets made from straw as a material for H2S adsorption and removal, also expands the application of straw waste in exhaust gas treatment.

A novel NIR-II fluorescent probe for hydrogen peroxide detection in drug-induced liver injury.

The synthesis of H2O2-activatable small molecules in the second near-infrared (NIR-II) window remains challenging. We present the NIR-II probe Z-1065 for real-time detection of H2O2. Z-1065 demonstrates high sensitivity and selectivity towards H2O2in vitro and effectively monitors H2O2 generation in drug-induced liver injury (DILI) mouse models.

KCa3.1 Promotes the Migration of Macrophages From Epicardial Adipose Tissue to Induce Vulnerability to Atrial Fibrillation During Rapid Pacing.

BACKGROUND: The relationship between local epicardial adipose tissue (EAT) macrophages and atrial fibrillation (AF) remains unclear. The purpose of this study was to investigate the role of KCa3.1 in the migration of macrophages from EAT to adjacent atrial tissue during rapid pacing. METHODS: Part 1: Eighteen beagles were randomly divided into the sham group, pacing group, and pacing + clodronate liposome (CL) group. Part 2: Eighteen beagles were randomly divided into the sham group, pacing group, and pacing + TRAM-34 group. HL-1 cells and RAW264.7 cells were co-cultured to explore the specific migratory mechanism of macrophages. RESULTS: Depleting EAT macrophages significantly reduced macrophage infiltration in the adjacent atrium and the induction of AF in canines with rapid atrial pacing. TRAM-34 significantly inhibited the migration of macrophages from EAT to the adjacent atrium and electrical remodelling in canines with rapid atrial pacing. Compared with those of the control HL-1 cells, the secretion of CCL2 and the number of migrating macrophages in pacing HL-1 cells was significantly increased, which could be reversed by TRAM-34. Further in vitro experiments showed that KCa3.1 regulated CCL2 secretion through the p65/STAT3 signalling pathway. CONCLUSIONS: Inhibiting myocardial KCa3.1 reduced the migration of EAT macrophages to adjacent atrial muscles caused by rapid atrial pacing, thereby decreasing vulnerability to AF. The mechanism by which KCa3.1 regulates CCL2 may be related to the p65/STAT3 signalling pathway.

Reactive Oxygen Species-Responsive Nanoparticle Delivery of Small Interfering Ribonucleic Acid Targeting Olfactory Receptor 2 for Atherosclerosis Theranostics.

Atherosclerosis (AS) is a chronic inflammatory disorder characterized by arterial intimal lipid plaques. Small interfering ribonucleic acid (siRNA)-based therapies, with their ability to suppress specific genes with high targeting precision and minimal side effects, have shown great potential for AS treatment. However, targets of siRNA therapies based on macrophages for AS treatment are still limited. Olfactory receptor 2 (Olfr2), a potential target for plaque formation, was discovered recently. Herein, anti-Olfr2 siRNA (si-Olfr2) targeting macrophages was designed, and the theranostic platform encapsulating si-Olfr2 to target macrophages within atherosclerotic lesions was also developed, with the aim of downregulating Olfr2, as well as diagnosing AS through photoacoustic imaging (PAI) in the second near-infrared (NIR-II) window with high resolution. By utilization of a reactive oxygen species (ROS)-responsive nanocarrier system, the expression of Olfr2 on macrophages within atherosclerotic plaques was effectively downregulated, leading to the inhibition of NLR family pyrin domain containing 3 (NLRP3) inflammasome activation and interleukin-1 ß (IL-1ß) secretion, thereby reducing the formation of atherosclerotic plaques. As manifested by decreased Olfr2 expression, the lesions exhibited a significantly alleviated inflammatory response that led to reduced lipid deposition, macrophage apoptosis, and a noticeable decrease in the necrotic areas. This study provides a proof of concept for evaluating the theranostic nanoplatform to specifically deliver si-Olfr2 to lesional macrophages for AS diagnosis and treatment.

Hydrothermal Synthesis of ß-NiS Nanoparticles and Their Applications in High-Performance Hybrid Supercapacitors.

In this work, ß-NiS nanoparticles (NPs) were efficiently prepared by a straightforward hydrothermal process. The difference in morphology between these NiS NPs was produced by adding different amounts of thiourea, and the corresponding products were denoted as NiS-15 and NiS-5. Through electrochemical tests, the specific capacity (Cs) of NiS-15 was determined to be 638.34 C g-1 at 1 A g-1, compared to 558.17 C g-1 for NiS-5. To explore the practical application potential of such ß-NiS NPs in supercapacitors, a hybrid supercapacitor (HSC) device was assembled with activated carbon (AC) as an anode. Benefitting from the high capacity of the NiS cathode and the large voltage window of the device, the NiS-15//AC HSC showed a high energy density (Ed) of 43.57 W h kg-1 at 936.92 W kg-1, and the NiS-5//AC HSC provided an inferior Ed of 37.89 W h kg-1 at 954.79 W kg-1. Both HSCs showed excellent cycling performance over 6000 cycles at 10 A g-1. The experimental findings suggest that both NiS-15 and NiS-5 in this study can serve as potential cathodes for high-performance supercapacitors. This current synthesis method is simple and can be extended to the preparation of other transition metal sulfide (TMS)-based electrode materials with exceptional electrochemical properties.

A Mitochondria-Targeted Photosensitizer for Combined Pyroptosis and Apoptosis with NIR-II Imaging/Photoacoustic Imaging-Guided Phototherapy.

Overcoming tumor apoptosis resistance is a major challenge in enhancing cancer therapy. Pyroptosis, a lytic form of programmed cell death (PCD) involving inflammasomes, Gasdermin family proteins, and cysteine proteases, offers potential in cancer treatment. While photodynamic therapy (PDT) can induce pyroptosis by generating reactive oxygen species (ROS) through the activation of photosensitizers (PSs), many PSs lack specific subcellular targets and are limited to the first near-infrared window, potentially reducing treatment effectiveness. Therefore, developing effective, deep-penetrating, organelle-targeted pyroptosis-mediated phototherapy is essential for cancer treatment strategies. Here, we synthesized four molecules with varying benzene ring numbers in thiopyrylium structures to preliminarily explore their photodynamic properties. The near-infrared-II (NIR-II) PS Z1, with a higher benzene ring count, exhibited superior ROS generation and mitochondria-targeting abilities, and a large Stokes shift. Through nano-precipitation method, Z1 nanoparticles (NPs) also demonstrated high ROS generation (especially type-I ROS) upon 808 nm laser irradiation, leading to efficient mitochondria dysfunction and combined pyroptosis and apoptosis. Moreover, they exhibited exceptional tumor-targeting ability via NIR-II fluorescence imaging (NIR-II FI) and photoacoustic imaging (PAI). Furthermore, Z1 NPs-mediated phototherapy effectively inhibited tumor growth with minimal adverse effects. Our findings offer a promising strategy for cancer therapy, warranting further preclinical investigations in PDT.

Analysis of Differences in Neonatal Sepsis Caused by Streptococcus Agalactiae and Escherichia Coli.

BACKGROUND: Streptococcus agalactiae (GBS) and Escherichia coli (E. coli) are the main pathogenic bacteria in neonatal sepsis. Therefore, the clinical characteristics, nonspecific indicators, and drug susceptibilities of these two bacteria were studied. METHODS: In total, 81 and 80 children with sepsis caused by GBS and E. coli infection, respectively, admitted to the neonatal department of our hospital between May 2012 and July 2023, were selected, and the clinical characteris-tics of the two groups were analyzed. Nonspecific indicators and drug sensitivity test results were analyzed retrospectively. RESULTS: Birth weight, tachypnea, groan, tachycardia or bradycardia, and the incidence of complications, such as pneumonia, respiratory failure, and purulent meningitis, were higher in the GBS group than in the E. coli group. The children were born prematurely, and the mother had a premature rupture of membranes. The incidence of jaundice, abdominal distension, atypical clinical manifestations, and complications of necrotizing enterocolitis was lower than of the E. coli group, and the differences were statistically significant (p < 0.05). The WBC, NE#, NE#/LY#, hs-CRP, and PCT of the GBS group were higher than those of the E. coli group, whereas the MPV, D-D, and FDP levels were lower than those in the E. coli group. The differences were all statistically significant (p < 0.05). The 81-bead GBS had high resistance rates against tetracycline (95%), erythromycin (48.8%), and clindamycin (40%), and no strains resistant to vancomycin, linezolid, penicillin, or ampicillin appeared, whereas 80 strains of E. coli were more resistant to penicillin and third-generation cephalosporins, with the higher resistance rates to ampicillin (68.30%), trimethoprim/sulfamethoxazole (53.6%), and ciprofloxacin (42.90%). Resistance rates to carbapenems and aminoglycosides were extremely low. CONCLUSIONS: Both GBS and E. coli neonatal sepsis have specific clinical characteristics, especially in terms of clinical manifestations, complications, non-specific indicators, and drug resistance. Early identification is important for clinical diagnosis and treatment.

Effectiveness of a Mobile Health Application for Educating Outpatients about Bowel Preparation.

Colonoscopy is an essential method for diagnosing and treating colorectal cancer, relying on effective bowel preparation to thoroughly examine the large intestinal mucosa. Traditional education involves printed instructions and verbal explanations but does not guarantee clear patient understanding. Poor bowel preparation can obscure mucosal visibility, delaying cancer diagnosis and treatment. A mobile medical model using Android devices for bowel preparation education was tested in a single-blind, randomized trial. This trial enrolled outpatients undergoing colonoscopy at the Endoscopy Center for Diagnostic and Treatment between 27 October 2021 and 31 December 2022. This study introduced the ColonClean app alongside traditional methods. After examination, endoscopists rated the preparation quality using the Aronchick scale. A data analysis was conducted using SPSS 25.0 to determine if there was a significant improvement in bowel preparation quality between the control group (traditional method) and the experimental group (traditional method plus the ColonClean app). Forty patients were recruited in each group. In the experimental group, all ratings were "fair", with 75% receiving an "excellent" or "good" rating, showing statistical significance (p = 0.016). The ColonClean app improves bowel preparation quality more effectively than traditional care instructions.

Intraocular pressure measurement and association with corneal biomechanics in patients underwent Descemet's stripping with endothelial keratoplasty: a comparative study.

Purpose: To compare corneal biomechanical properties and intraocular pressure (IOP) measurements in patients who underwent Descemet's stripping with endothelial keratoplasty (DSEK) with those of the follow healthy eyes. Methods: In this retrospective comparative study, a total of 35 eyes of 35 patients who underwent DSEK by a single surgeon from 2015.02 to 2019.12 were enrolled along with their fellow healthy eyes. Corneal biomechanical parameters were assessed at least 3 months post-DSEK using Corneal Visualization Scheimpflug Technology (CST). IOP was measured by CST, Goldmann applanation tonometry (GAT), and MacKay-Marg tonometer. Results: Central corneal thickness (CCT) and stiffness parameter at first applanation (SP-A1) were significantly increased after DSEK when compared to the fellow eyes. In DSEK eyes, biomechanically-corrected intraocular pressure (bIOP) and MacKay-Marg IOP correlated significantly with GAT IOP measurements, with bIOP showed the lowest IOP values. All the IOP values did not correlate with CCT. However, GAT-IOP and MacKay-Marg IOP showed a positive correlation with SP-A1. Conclusion: The corneal stiffness increased after DSEK. Central corneal thickness may have less influence than corneal biomechanics on IOP measurements in eyes after DSEK. Biomechanically-corrected IOP obtained by CST seemed to be lower than other tonometry techniques in DSEK eyes, perhaps because of correction for corneal stiffness, CCT and age.

Nanoparticle drug delivery system for the treatment of brain tumors: Breaching the blood-brain barrier.

The current status of clinical trials utilizing nanoparticle drug delivery system (NDDS) for brain tumors was summarized.Image 1.

Preparation of Few-Layered MoS2 by One-Pot Hydrothermal Method for High Supercapacitor Performance.

Molybdenum disulfide (MoS2), a typical layered material, has important applications in various fields, such as optoelectronics, catalysis, electronic devices, sensors, and supercapacitors. Extensive research has been carried out on few-layered MoS2 in the field of electrochemistry due to its large specific surface area, abundant active sites and short electron transport path. However, the preparation of few-layered MoS2 is a significant challenge. This work presents a simple one-pot hydrothermal method for synthesizing few-layered MoS2. Furthermore, it investigates the exfoliation effect of different amounts of sodium borohydride (NaBH4) as a stripping agent on the layer number of MoS2. Na+ ions, as alkali metal ions, can intercalate between layers to achieve the purpose of exfoliating MoS2. Additionally, NaBH4 exhibits reducibility, which can effectively promote the formation of the metallic phase of MoS2. Few-layered MoS2, as an electrode for supercapacitor, possesses a wide potential window of 0.9 V, and a high specific capacitance of 150 F g-1 at 1 A g-1. This work provides a facile method to prepare few-layered two-dimensional materials for high electrochemical performance.

Fabrication of Polymer/Cholesteric Liquid Crystal Films and Fibers Using the Nonsolvent and Phase Separation Method.

In recent years, liquid crystal materials have drawn great interest because of their wide range of applications. Among various thermochromic materials, cholesteric liquid crystalline (CLC) materials have been well studied and reported. CLC materials have the advantages of ready manipulation and multiple color transitions. For the further development of smart clothing and wearable electronics, however, the incorporation of CLC materials into polymers still remains challenging. The difficulties lie in the prevention of leakage of CLC and retention of the cholesteric liquid crystalline phase. In this work, we demonstrate a versatile nonsolvent and phase separation method using polar solvents to incorporate CLC microspheres into polymer matrix. Poly(vinyl alcohol) (PVA), a water-soluble polymer, is chosen as the polymer because of its high transparency and ease to handle. Using spin-coating and wet spinning techniques, PVA/CLC films and fibers can be fabricated. The formation of CLC microspheres in the polymer matrix is characterized through optical and polarized microscopy. Compared with the CLC films, the PVA/CLC composites demonstrate superior thermal stability. Moreover, both PVA/CLC films and fibers exhibit good color stability from the electrical tests. This work provides an effective strategy to prepare polymer/CLC composites, paving a wide avenue toward applications in smart textiles, display technologies, and medical devices.

Driving force of value reversal in Chinese overleveraged firms: The mechanism and path of private placement.

To stimulate economic growth, China has launched multiple economic stimulus plans in recent years, intensifying corporate debt financing and subsequently elevating the leverage levels. Addressing and effectively reducing the leverage levels of our country's enterprises has emerged as a pressing issue in the trajectory of our economic development. This paper primarily investigates the drivers, pathways, and mechanisms for reversing the over-leveraged values of enterprises. Key findings include: (1) Excessive indebtedness exerts a negative impact on corporate value, with the suppressing effect intensifying as the degree of over-leverage increases; (2) Over-leveraged enterprises can effectively decrease their debt levels and enhance their value through private placement. Further research suggests that this mechanism operates by amplifying the operational leverage of over-leveraged enterprises post private placement and alleviating financing constraints, thereby elevating corporate value. (3) Compared to non-state-owned enterprises, state-owned enterprises exhibit higher levels of indebtedness. Among over-leveraged firms, enhancements in corporate governance and increased investment efficiency can positively transform corporate value. This study offers valuable insights for the ongoing supply-side structural reforms and governance guidance from the regulatory bodies.

Clinical applications of metagenomic next-generation sequencing in the identification of pathogens in periprosthetic joint infections: a retrospective study.

BACKGROUND: This study aimed to evaluate the application of metagenomic next-generation sequencing (mNGS) technology to identify pathogens in periprosthetic joint infection (PJI). METHODS: A retrospective analysis was conducted on 65 patients suspected of having PJI between April 2020 and July 2023. The patients were categorized into PJI (46 patients) and non-PJI (19 patients) groups based on the 2018 International Consensus Meeting criteria. Clinical data were collected, and both conventional bacterial culture and mNGS were performed. The diagnostic performance of the two methods was compared and analyzed. RESULTS: mNGS exhibited a sensitivity of 89.13%, a specificity of 94.74%, a positive predictive value of 97.62%, a negative predictive value of 78.26%, and an overall diagnostic accuracy of 90.77%. Compared to microbial culture, mNGS demonstrated superior diagnostic sensitivity while maintaining similar specificity. A total of 48 pathogens were successfully identified using mNGS, with Coagulase-negative staphylococci, Streptococci, Staphylococcus aureus, and Cutibacterium acnes being the most common infectious agents. Notably, mNGS was used to identify 17 potential pathogens in 14 culture-negative PJI samples, highlighting its ability to detect rare infectious agents, including Cutibacterium acnes (n = 5), Granulicatella adiacens (n = 1), Mycobacterium tuberculosis complex (n = 1), and Coxiella burnetii (n = 1), among others, which are not detectable by routine culture methods. However, mNGS failed to detect the pathogen in 4 culture-positive PJI patients, indicating its limitations. Among the 46 PJI patients, 27 had positive culture and mNGS results. The results of mNGS were concordant with those of culture at the genus level in 6 patients with PJI and at the species level in 18 patients. Furthermore, the present study revealed a significantly greater proportion of Staphylococcus aureus in the sinus tract group (45.45%) than in the non-sinus tract group (14.29%), indicating the association of this pathogen with sinus formation in PJI (P = 0.03). Additionally, there was no significant difference in the occurrence of polymicrobial infections between the sinus tract group (27.27%) and the non-sinus tract group (33.33%) (P = 0.37). CONCLUSIONS: Metagenomic next-generation sequencing can serve as a valuable screening tool in addition to traditional culture methods to improve diagnostic accuracy through optimized culture strategies.

Review on synthetic approaches and PEC activity performance of bismuth binary and mixed-anion compounds for potential applications in marine engineering.

Photoelectrochemical (PEC) technology in marine engineering holds significant importance due to its potential to address various challenges in the marine environment. Currently, PEC-type applications in marine engineering offer numerous benefits, including sustainable energy generation, water desalination and treatment, photodetection, and communication. Finding novel efficient photoresponse semiconductors is of great significance for the development of PEC-type techniques in the marine space. Bismuth-based semiconductor materials possess suitable and tunable bandgap structures, high carrier mobility, low toxicity, and strong oxidation capacity, which gives them great potential for PEC-type applications in marine engineering. In this paper, the structure and properties of bismuth binary and mixed-anion semiconductors have been reviewed. Meanwhile, the recent progress and synthetic approaches were discussed from the point of view of the application prospects. Finally, the issues and challenges of bismuth binary and mixed-anion semiconductors in PEC-type photodetection and hydrogen generation are analyzed. Thus, this perspective will not only stimulate the further investigation and application of bismuth binary and mixed-anion semiconductors in marine engineering but also help related practitioners understand the recent progress and potential applications of bismuth binary and mixed-anion compounds.

High-performance asymmetric supercapacitors assembled with novel disc-like MnCo2O4 microstructures as advanced cathode material.

Herein, porous MnCo2O4 with disc-like (MnCo2O4-discs) and ring-like (MnCo2O4-rings) microstructures were respectively synthesized using an initial hydrothermal method at different temperatures and a calcination treatment in air. The electrochemical properties of these MnCo2O4 materials were investigated in three-electrode and two-electrode systems, and as such, MnCo2O4 presented a battery-like electrochemical response. The specific capacity of MnCo2O4-discs was determined to be 296.1C/g at 1 A/g, superior to 246.3C/g for MnCo2O4-rings. An asymmetric supercapacitor (ASC) was assembled with MnCo2O4 as the cathode and activated carbon (AC) as the anode to evaluate the potential for practical application. The MnCo2O4-discs//AC ASC exhibited an energy density (Ed) of 35.8 W h kg-1 at a power density (Pd) of 927.5 W kg-1. For the MnCo2O4-rings//AC ASC, an inferior Ed of 31.4 W h kg-1 under 890.9 W kg-1 was achieved. Furthermore, the two ASCs presented outstanding cyclic performance after 5000 cycles at 6 A/g. The exceptional properties of MnCo2O4 microstructures can be applied to the assembly of ASC devices, which can have promising potential for application in electrochemical energy storage. This synthetic method is straightforward, cost-effective, and can be extended to fabricate similar electrode materials with superior electrochemical performance.

Sonochemical synthesis of CoNi layered double hydroxide as a cathode material for assembling high performance hybrid supercapacitor.

Fabricating battery-type electrode materials with large specific surface area and mesopores is an efficient method for enhancing the electrochemical performance of supercapacitors. This method may provide more active sites for Faradic reactions and shorten the ion-diffusion paths. In this study, the CoNi layered double hydroxides (LDHs) with the morphology of nanoflowers and nanoflakes were prepared in solutions with pH values of 7.5 (CoNi LDH-7.5) and 8.5 (CoNi LDH-8.5) via a simple sonochemical approach. These CoNi LDHs possessed large specific surface areas and favourable electrochemical properties. The CoNi LDH-7.5 delivered a specific capacity of 740.8C/g at a current density of 1 A/g, surpassing CoNi LDH-8.5 with 668.1C/g. The hybrid supercapacitor (HSC) was assembled with activated carbon as the anode and CoNi LDH as the cathode to assess its practical application potential in the field of electrochemical energy storage. The CoNi LDH-7.5//AC HSC achieved the highest energy density of 35.6 W h kg-1 at a power density of 781.1 W kg-1. In addition, both HSCs exhibited little capacity decay over 5,000 cycles at a high current load of 8 A/g. These electrochemical properties of CoNi LDHs make them promising candidates for battery-type electrode materials. The current sonochemical method is simple and can be applied to the preparation of other LDHs-based electrode materials with favourable electrochemical performance.