Ultrafine PtCo alloy nanoparticles integrated into porous N-doped nanosheets for durable oxygen reduction reaction.

Here, we propose a sub-3 nm small-size PtCo alloy catalyst integrated into a porous nitrogen-doped nanosheet through a space-confined and interfacial induction strategy. The designed PtCo-CoNC-P catalyst exhibits exceptional durability, with only a minimal 2 mV decline in half-wave potential after 30 000 cycles of accelerated durability tests.

The DNA Damage Repair Function of Fission Yeast CK1 Involves Targeting Arp8, a Subunit of the INO80 Chromatin Remodeling Complex.

The CK1 family are conserved serine/threonine kinases with numerous substrates and cellular functions. The fission yeast CK1 orthologues Hhp1 and Hhp2 were first characterized as regulators of DNA repair, but the mechanism(s) by which CK1 activity promotes DNA repair had not been investigated. Here, we found that deleting Hhp1 and Hhp2 or inhibiting CK1 catalytic activities in yeast or in human cells increased double-strand breaks (DSBs). The primary pathways to repair DSBs, homologous recombination and nonhomologous end joining, were both less efficient in cells lacking Hhp1 and Hhp2 activity. To understand how Hhp1 and Hhp2 promote DNA damage repair, we identified new substrates of these enzymes using quantitative phosphoproteomics. We confirmed that Arp8, a component of the INO80 chromatin remodeling complex, is a bona fide substrate of Hhp1 and Hhp2 important for DNA repair. Our data suggest that Hhp1 and Hhp2 facilitate DNA repair by phosphorylating multiple substrates, including Arp8.

New mutations in the core Schizosaccharomyces pombe spindle pole body scaffold Ppc89 reveal separable functions in regulating cell division.

Centrosomes and spindle pole bodies (SPB) are important for mitotic spindle formation and also serve as signaling platforms. In the fission yeast Schizosaccharomyces pombe, genetic ablation and high-resolution imaging indicate that the ɑ-helical Ppc89 is central to SPB structure and function. Here, we developed and characterized conditional and truncation mutants of ppc89. Alleles with mutations in two predicted ɑ-helices near the C-terminus were specifically defective in anchoring Sid4, the scaffold for the septation initiation network (SIN), and proteins dependent on Sid4 (Cdc11, Dma1, Mto1 and Mto2). Artificial tethering of Sid4 to the SPB fully rescued these ppc89 mutants. Another ppc89 allele had mutations located throughout the coding region. While this mutant was also defective in Sid4 anchoring, it displayed additional defects including fragmented SPBs and forming and constricting a second cytokinetic ring in one daughter cell. These defects were shared with a ppc89 allele truncated of the most C-terminal predicted ɑ-helices that is still able to recruit Sid4 and the SIN. We conclude that Ppc89 not only tethers the SIN to the SPB but is also necessary for the integrity of the SPB and faithful coordination of cytokinesis with mitosis.

Fission yeast Duc1 links to ER-PM contact sites and influences PM lipid composition and cytokinetic ring anchoring.

Cytokinesis is the final stage of the cell cycle that results in the physical separation of daughter cells. To accomplish cytokinesis, many organisms build an actin- and myosin-based cytokinetic ring (CR) that is anchored to the plasma membrane (PM). Defects in CR-PM anchoring can arise when the PM lipid phosphatidylinositol (4,5)-bisphosphate [PI(4,5)P2] is depleted. In Schizosaccharomyces pombe, reduced PM PI(4,5)P2 results in a CR that cannot maintain a medial position and slides toward one cell end, resulting in two differently sized daughter cells. S. pombe PM PI(4,5)P2 is synthesized by the phosphatidylinositol 4-phosphate 5-kinase (PI5-kinase) Its3, but what regulates this enzyme to maintain appropriate PM PI(4,5)P2 levels in S. pombe is not known. To identify Its3 regulators, we used proximity-based biotinylation, and the uncharacterized protein Duc1 was specifically detected. We discovered that Duc1 decorates the PM except at the cell division site and that its unique localization pattern is dictated by binding to the endoplasmic reticulum (ER)-PM contact site proteins Scs2 and Scs22. Our evidence suggests that Duc1 also binds PI(4,5)P2 and helps enrich Its3 at the lateral PM, thereby promoting PM PI(4,5)P2 synthesis and robust CR-PM anchoring.

The core spindle pole body scaffold Ppc89 links the pericentrin orthologue Pcp1 to the fission yeast spindle pole body via an evolutionarily conserved interface.

Centrosomes and spindle pole bodies (SPBs) are important for mitotic spindle formation and serve as cellular signaling platforms. Although centrosomes and SPBs differ in morphology, many mechanistic insights into centrosome function have been gleaned from SPB studies. In the fission yeast Schizosaccharomyces pombe, the α-helical protein Ppc89, identified based on its interaction with the septation initiation network scaffold Sid4, comprises the SPB core. High-resolution imaging has suggested that SPB proteins assemble on the Ppc89 core during SPB duplication, but such interactions are undefined. Here, we define a connection between Ppc89 and the essential pericentrin Pcp1. Specifically, we found that a predicted third helix within Ppc89 binds the Pcp1 pericentrin-AKAP450 centrosomal targeting (PACT) domain complexed with calmodulin. Ppc89 helix 3 contains similarity to present in the N-terminus of Cep57 (PINC) motifs found in the centrosomal proteins fly SAS-6 and human Cep57 and also to the S. cerevisiae SPB protein Spc42. These motifs bind pericentrin-calmodulin complexes and AlphaFold2 models suggest a homologous complex assembles in all four organisms. Mutational analysis of the S. pombe complex supports the importance of Ppc89-Pcp1 binding interface in vivo. Our studies provide insight into the core architecture of the S. pombe SPB and suggest an evolutionarily conserved mechanism of scaffolding pericentrin-calmodulin complexes for mitotic spindle formation.

Substrate displacement of CK1 C-termini regulates kinase specificity.

CK1 kinases participate in many signaling pathways, and their regulation is of meaningful biological consequence. CK1s autophosphorylate their C-terminal noncatalytic tails, and eliminating these tails increases substrate phosphorylation in vitro, suggesting that the autophosphorylated C-termini act as inhibitory pseudosubstrates. To test this prediction, we comprehensively identified the autophosphorylation sites on Schizosaccharomyces pombe Hhp1 and human CK1ε. Phosphoablating mutations increased Hhp1 and CK1ε activity toward substrates. Peptides corresponding to the C-termini interacted with the kinase domains only when phosphorylated, and substrates competitively inhibited binding of the autophosphorylated tails to the substrate binding grooves. Tail autophosphorylation influenced the catalytic efficiency with which CK1s targeted different substrates, and truncating the tail of CK1δ broadened its linear peptide substrate motif, indicating that tails contribute to substrate specificity as well. Considering autophosphorylation of both T220 in the catalytic domain and C-terminal sites, we propose a displacement specificity model to describe how autophosphorylation modulates substrate specificity for the CK1 family.

Crystalline modulation of zirconia for efficient nitrate reduction to ammonia under ambient conditions.

Zirconia as a polycrystalline catalyst can be effectively tuned by doping low-valence elements and meanwhile form abundant oxygen vacancies. Herein, the crystalline structures of zirconia are modulated by scandium doping and proposed as a robust catalyst for nitrate reduction to ammonia. The tetragonal zirconia achieves a maximum ammonia yield of 16.03 mg h-1 mgcat.-1, superior to the other crystal forms. DEMS tests unveil the reaction pathway and theoretical calculations reveal the low free energy of -0.22 eV for nitrate adsorption at the tetragonal zirconia.

NbC Nanoparticles Decorated Carbon Nanofibers as Highly Active and Robust Heterostructural Electrocatalysts for Ammonia Synthesis.

Transition-metal carbides with metallic properties have been extensively used as electrocatalysts due to their excellent conductivity and unique electronic structures. Herein, NbC nanoparticles decorated carbon nanofibers (NbC@CNFs) are proposed as an efficient and robust catalyst for electrochemical synthesis of ammonia from nitrate/nitrite reduction, which achieves a high Faradaic efficiency (FE) of 94.4 % and a large ammonia yield of 30.9 mg h-1 mg-1 cat.. In situ electrochemical tests reveal the nitrite reduction at the catalyst surface follows the *NO pathway and theoretical calculations reveal the formation of NbC@CNFs heterostructure significantly broadens density of states nearby the Fermi energy. Finite element simulations unveil that the current and electric field converge on the NbC nanoparticles along the fiber, suggesting the dispersed carbides are highly active for nitrite reduction.

Regulating Electron Filling and Orbital Occupancy of Anti-Bonding States of Transition Metal Nitride Heterojunction for High Areal Capacity Lithium-Sulfur Full Batteries.

The commercialization of lithium-sulfur (Li-S) battery is seriously hindered by the shuttle behavior of lithium (Li) polysulfide, slow conversion kinetics, and Li dendrite growth. Herein, a novel hierarchical p-type iron nitride and n-type vanadium nitride (p-Fe2N/n-VN) heterostructure with optimal electronic structure, confined in vesicle-like N-doped nanofibers (p-Fe2N/n-VN⊂PNCF), is meticulously constructed to work as "one stone two birds" dual-functional hosts for both the sulfur cathode and Li anode. As demonstrated, the d-band center of high-spin Fe atom captures more electrons from V atom to realize more π* and moderate σ* bond electron filling and orbital occupation; thus, allowing moderate adsorption intensity for polysulfides and more effective d-p orbital hybridization to improve reaction kinetics. Meanwhile, this unique structure can dynamically balance the deposition and transport of Li on the anode; thereby, more effectively inhibiting Li dendrite growth and promoting the formation of a uniform solid electrolyte interface. The as-assembled Li-S full batteries exhibit the conspicuous capacities and ultralong cycling lifespan over 2000 cycles at 5.0 C. Even at a higher S loading (20 mg cm-2) and lean electrolyte (2.5 µL mg-1), the full cells can still achieve an ultrahigh areal capacity of 16.1 mAh cm-2 after 500 cycles at 0.1 C.

Engineering a High-Loading Sub-4 nm Intermetallic Platinum-Cobalt Alloy on Atomically Dispersed Cobalt-Nitrogen-Carbon for Efficient Oxygen Reduction in Fuel Cells.

Developing a high-performance membrane electrode assembly (MEA) poses a formidable challenge for fuel cells, which lies in achieving both high metal loading and efficient catalytic activity concurrently for MEA catalysts. Here, we introduce a porous Co@NC carrier to synthesize sub-4 nm PtCo intermetallic nanocrystals, achieving an impressive Pt loading of 27 wt %. The PtCo-CoNC catalyst demonstrates exceptional catalytic activity and remarkable stability for the oxygen reduction reaction. Advanced characterization techniques and theoretical calculations emphasize the synergistic effect between PtCo alloys and single Co atoms, which enhances the desorption of the OH* intermediate. Furthermore, the PtCo-CoNC-based cathode delivers a high power density of 1.22 W cm-2 in the MEA test owing to the enhanced mass transport, which is verified by the simulation results of the O2 distributions and current density inside the catalyst layer. This study lays the groundwork for the design of efficient catalysts with practical applications in fuel cells.

The Greatwall-Endosulfine-PP2A/B55 pathway controls entry into quiescence by promoting translation of Elongator-tuneable transcripts.

Quiescent cells require a continuous supply of proteins to maintain protein homeostasis. In fission yeast, entry into quiescence is triggered by nitrogen stress, leading to the inactivation of TORC1 and the activation of TORC2. Here, we report that the Greatwall-Endosulfine-PPA/B55 pathway connects the downregulation of TORC1 with the upregulation of TORC2, resulting in the activation of Elongator-dependent tRNA modifications essential for sustaining the translation programme during entry into quiescence. This process promotes U34 and A37 tRNA modifications at the anticodon stem loop, enhancing translation efficiency and fidelity of mRNAs enriched for AAA versus AAG lysine codons. Notably, some of these mRNAs encode inhibitors of TORC1, activators of TORC2, tRNA modifiers, and proteins necessary for telomeric and subtelomeric functions. Therefore, we propose a novel mechanism by which cells respond to nitrogen stress at the level of translation, involving a coordinated interplay between the tRNA epitranscriptome and biased codon usage.

Membrane binding of endocytic myosin-1s is inhibited by a class of ankyrin repeat proteins.

Myosin-1s are monomeric actin-based motors that function at membranes. Myo1 is the single myosin-1 isoform in Schizosaccharomyces pombe that works redundantly with Wsp1-Vrp1 to activate the Arp2/3 complex for endocytosis. Here, we identified Ank1 as an uncharacterized cytoplasmic Myo1 binding partner. We found that in ank1Δ cells, Myo1 dramatically redistributed from endocytic patches to decorate the entire plasma membrane and endocytosis was defective. Biochemical analysis and structural predictions suggested that the Ank1 ankyrin repeats bind the Myo1 lever arm and the Ank1 acidic tail binds the Myo1 TH1 domain to prevent TH1-dependent Myo1 membrane binding. Indeed, Ank1 overexpression precluded Myo1 membrane localization and recombinant Ank1 reduced purified Myo1 liposome binding in vitro. Based on biochemical and cell biological analyses, we propose budding yeast Ank1 and human OSTF1 are functional Ank1 orthologs and that cytoplasmic sequestration by small ankyrin repeat proteins is a conserved mechanism regulating myosin-1s in endocytosis.

Quasi-Copper-Mers Enable High-Performance Catalysis for CO2 Reduction.

As the atmospheric carbon dioxide (CO2 ) level keeps hitting the new record, humanity is facing an ever-daunting challenge to efficiently mitigate CO2 from the atmosphere. Though electrochemical CO2 reduction presents a promising pathway to convert CO2 to valuable fuels and chemicals, the general lack of suitable electrocatalysts with high activity and selectivity severely constrains this approach. Herein, a novel class of electrocatalysts is investigated, the quasi-copper-mers, in which the CuN4 rather than Cu atom itself serve as the basic building block. The respective quasi-copper-monomers, -dimers, and -trimers hosted in a graphene-like substrate are first synthesized and then performed both experimental characterization and density functional theory (DFT) calculations to examine their atomic structures, evaluate their electrocatalytical performance and understand their underlying mechanisms. The experimental results show that the quasi-copper-trimers not only outperform the quasi-copper-dimer and quasi-copper-monomer when catalyzing CO2 to CO, it also shows a superior selectivity against the competing hydrogen evolution reaction (HER). The DFT calculations not only support the experimental observations, but also reveal the volcano curve and the physical origin for the qausi-copper-trimer superiority. The present work thus presents a new strategy in the design of high-performance electrocatalysts with high activity and selectivity.

Substrate displacement of CK1 C-termini regulates kinase specificity.

CK1 kinases participate in many signaling pathways; how these enzymes are regulated is therefore of significant biological consequence. CK1s autophosphorylate their C-terminal non-catalytic tails, and eliminating these modifications increases substrate phosphorylation in vitro, suggesting that the autophosphorylated C-termini act as inhibitory pseudosubstrates. To test this prediction, we comprehensively identified the autophosphorylation sites on Schizosaccharomyces pombe Hhp1 and human CK1ε. Peptides corresponding to the C-termini interacted with the kinase domains only when phosphorylated, and phosphoablating mutations increased Hhp1 and CK1ε activity towards substrates. Interestingly, substrates competitively inhibited binding of the autophosphorylated tails to the substrate binding grooves. The presence or absence of tail autophosphorylation influenced the catalytic efficiency with which CK1s targeted different substrates, indicating that tails contribute to substrate specificity. Combining this mechanism with autophosphorylation of the T220 site in the catalytic domain, we propose a displacement specificity model to describe how autophosphorylation regulates substrate specificity for the CK1 family.

Photoelectron "Bridge" in Van Der Waals Heterojunction for Enhanced Photocatalytic CO2 Conversion Under Visible Light.

Constructing Van der Waals heterojunction is a crucial strategy to achieve excellent photocatalytic activity. However, in most Van der Waals heterojunctions synthesized by ex situ assembly, electron transfer encounters huge hindrances at the interface between the two components due to the large spacing and potential barrier. Herein, a phosphate-bridged Van der Waals heterojunction of cobalt phthalocyanine (CoPc)/tungsten disulfide (WS2 ) bridged by phosphate (xCoPc-nPO4 - -WS2 ) is designed and prepared by the traditional wet chemistry method. By introducing a small phosphate molecule into the interface of CoPc and WS2 , creates an electron "bridge", resulting in a compact combination and eliminating the space barrier. Therefore, the phosphate (PO4 - ) bridge can serve as an efficient electron transfer channel in heterojunction and can efficiently transmit photoelectrons from WS2 to CoPc under excited states. These excited photoelectrons are captured by the catalytic central Co2+ in CoPc and subsequently convert CO2 molecules into CO and CH4 products, achieving 17-fold enhancement on the 3CoPc-0.6PO4 - -WS2 sample compared to that of pure WS2 . Introducing a small molecule "bridge" to create an electron transfer channel provides a new perspective in designing efficient photocatalysts for photocatalytic CO2 reduction into valuable products.

Co3O4 nanoparticles embedded in porous carbon nanofibers enable efficient nitrate reduction to ammonia.

The nitrate reduction reaction is emerging as having tremendous potential to mitigate nitrate pollution and simultaneously produce valuable ammonia. Here, we propose Co3O4 nanoparticles embedded in porous carbon nanofibers (Co3O4@CNF) as a high-efficiency catalyst to convert nitrate to ammonia, and it achieves a high faradaic efficiency of 92.7% and an extremely large NH3 yield of 23.4 mg h-1 mg-1cat, and also presents excellent electrochemical stability. Theoretical calculations reveal that the potential determining step (PDS) reaches as low as 0.28 eV. This work is expected to open a new avenue to rationally design robust noble-metal-free catalysts for the electrochemical synthesis of ammonia.

Fission yeast CK1 promotes DNA double-strand break repair through both homologous recombination and non-homologous end joining.

The CK1 family are conserved serine/threonine kinases with numerous substrates and cellular functions. The fission yeast CK1 orthologues Hhp1 and Hhp2 were first characterized as regulators of DNA repair, but the mechanism(s) by which CK1 activity promotes DNA repair had not been investigated. Here, we found that deleting Hhp1 and Hhp2 or inhibiting CK1 catalytic activities in yeast or in human cells activated the DNA damage checkpoint due to persistent double-strand breaks (DSBs). The primary pathways to repair DSBs, homologous recombination and non-homologous end joining, were both less efficient in cells lacking Hhp1 and Hhp2 activity. In order to understand how Hhp1 and Hhp2 promote DSB repair, we identified new substrates using quantitative phosphoproteomics. We confirmed that Arp8, a component of the INO80 chromatin remodeling complex, is a bona fide substrate of Hhp1 and Hhp2 that is important for DSB repair. Our data suggest that Hhp1 and Hhp2 facilitate DSB repair by phosphorylating multiple substrates, including Arp8.

Membrane binding of endocytic myosin-1s is inhibited by a class of ankyrin repeat proteins.

Myosin-1s are monomeric actin-based motors that function at membranes. Myo1 is the single myosin-1 isoform in Schizosaccharomyces pombe that works redundantly with Wsp1-Vrp1 to activate the Arp2/3 complex for endocytosis. Here, we identified Ank1 as an uncharacterized cytoplasmic Myo1 binding partner. We found that in ank1Δ cells, Myo1 dramatically redistributed from endocytic patches to decorate the entire plasma membrane and endocytosis was defective. Biochemical analysis and structural predictions suggested that the Ank1 ankyrin repeats bind the Myo1 lever arm and the Ank1 acidic tail binds the Myo1 TH1 domain to prevent TH1-dependent Myo1 membrane binding. Indeed, Ank1 over-expression precluded Myo1 membrane localization and recombinant Ank1 blocked purified Myo1 liposome binding in vitro. Based on biochemical and cell biology analyses, we propose budding yeast Ank1 and human OSTF1 are functional Ank1 orthologs and that cytoplasmic sequestration by small ankyrin repeat proteins is a conserved mechanism regulating myosin-1s in endocytosis. Summary: Fission yeast long-tailed myosin-1 binds Ank1. Ank1 ankyrin repeats associate with the Myo1 lever arm and Ank1 acidic tail binds the Myo1 TH1 domain to inhibit Myo1 membrane binding. Ank1 orthologs exists in budding yeast (Ank1) and humans (OSTF1).

Multiple polarity kinases inhibit phase separation of F-BAR protein Cdc15 and antagonize cytokinetic ring assembly in fission yeast.

The F-BAR protein Cdc15 is essential for cytokinesis in Schizosaccharomyces pombe and plays a key role in attaching the cytokinetic ring (CR) to the plasma membrane (PM). Cdc15's abilities to bind to the membrane and oligomerize via its F-BAR domain are inhibited by phosphorylation of its intrinsically disordered region (IDR). Multiple cell polarity kinases regulate Cdc15 IDR phosphostate, and of these the DYRK kinase Pom1 phosphorylation sites on Cdc15 have been shown in vivo to prevent CR formation at cell tips. Here, we compared the ability of Pom1 to control Cdc15 phosphostate and cortical localization to that of other Cdc15 kinases: Kin1, Pck1, and Shk1. We identified distinct but overlapping cohorts of Cdc15 phosphorylation sites targeted by each kinase, and the number of sites correlated with each kinases' abilities to influence Cdc15 PM localization. Coarse-grained simulations predicted that cumulative IDR phosphorylation moves the IDRs of a dimer apart and toward the F-BAR tips. Further, simulations indicated that the overall negative charge of phosphorylation masks positively charged amino acids necessary for F-BAR oligomerization and membrane interaction. Finally, simulations suggested that dephosphorylated Cdc15 undergoes phase separation driven by IDR interactions. Indeed, dephosphorylated but not phosphorylated Cdc15 undergoes liquid-liquid phase separation to form droplets in vitro that recruit Cdc15 binding partners. In cells, Cdc15 phosphomutants also formed PM-bound condensates that recruit other CR components. Together, we propose that a threshold of Cdc15 phosphorylation by assorted kinases prevents Cdc15 condensation on the PM and antagonizes CR assembly.

Heterogenous Cu@ZrO2 nanofibers enable efficient electrocatalytic nitrate reduction to ammonia under ambient conditions.

In this study, we construct a Cu@ZrO2 heterogenous structure as a new catalyst that achieves a large NH3 yield of 15.4 mg h-1 mg-1cat. and a high faradaic efficiency of 67.6% at -0.7 V vs. RHE in 0.1 M PBS with 0.1 M NaNO3, and it also shows excellent electrochemical durability and structural stability. Theoretical calculations reveal an extremely low adsorption energy of -1.54 eV at Cu surfaces and Cu can significantly reduce the applied overpotential and correspondingly promote the catalytic activity.