Complications of Antibiotic Cement Spacers Used for Elbow Infections.

INTRODUCTION: Antibiotic cement spacers have been widely used in the treatment of joint infections. There are no commercially available antibiotic spacers for the elbow. Instead, they are typically fashioned by the surgeon at the time of surgery using cement alone or a combination of cement with sutures, Steinmann pins, external fixator components, or elbow arthroplasty components. There is no consensus regarding the ideal elbow antibiotic spacer and no previous studies have examined the complications associated with these handmade implants in relation to their unique structural design. METHODS: We retrospectively reviewed 55 patients who had 78 static antibiotic cement spacers implanted between January 1998 and February 2021 as part of a 2-stage treatment plan for infection of an elbow arthroplasty, other elbow surgery, or primary elbow infection. Several antibiotic spacer structures were used during the study period. For analysis purposes, the spacers were classified into linked and unlinked spacers based on whether there was a linking mechanism between the humerus and the ulna. Complications related to these spacers that occurred either during the implantation, between implantation and removal, or during removal were recorded and analyzed from chart review and follow-up x rays. Re-operations due to spacer-related complications were also recorded. RESULTS: Among the 55 patients (78 spacers), there were 23 complications, including 17 minor and 6 major complications. The most common complication of unlinked spacers (intramedullary (IM) dowels, beads and cap spacer) was spacer displacement. Other complications included IM dowel fracture and difficulty locating beads during spacer removal. The major complications of linked cement spacers included two periprosthetic humerus fractures after internal external fixator cement spacers and re-operation due to breakage and displacement of one bushing cement spacer. The major complications of unlinked cement spacers included two reoperations due to IM dowel displacement and one reoperation due to displacement of beads. Among patients who had removal of all components and those with native joints, there was no statistically significant difference between internal external fixator cement spacers and unlinked cement spacers in minor complication rates (30% versus 16%, p=0.16), major complication rates (7% versus 8%, p=0.85) and re-operation rates (0% versus 8%, p=0.12). CONCLUSIONS: Static handmade antibiotic elbow spacers have unique complications related to their structural designs. The most common complication of linked and non-linked cement spacers were failure of the linking mechanism and displacement, respectively. Surgeons should keep in mind the possible complications of different structures of cement spacers when choosing one antibiotic spacer structure over another.

Factors predicting lower limb alignment after Oxford medial unicompartmental knee arthroplasty.

This study aimed to identify the factors affecting hip-knee-ankle (HKA) angle following Oxford medial unicompartmental knee arthroplasty (MUKA). A retrospective analysis of 200 patients who underwent Oxford MUKA from June 2018 to October 2020 was conducted. Univariate and multivariate analyses were performed to investigate the impact of surgical and radiographic characteristics on the postoperative HKA angle. The mean HKA angle was 9.5 ± 4.3° before surgery and 3.6 ± 3.7° after surgery (p < 0.001). The postoperative HKA angle significantly correlated with the preoperative HKA angle, bearing size, tibial component alignment angle, and BMI (r = 0.71, p < 0.001; r = - 0.24, p = 0.001; r = 0.21, p = 0.004; r = - 0.18, p = 0.011). Multiple linear regression analysis revealed that the preoperative HKA angle (ß = 0.68, p < 0.001), bearing size (ß = - 0.31, p < 0.001), tibial component alignment angle (ß = 0.14, p = 0.003), and BMI (ß = - 0.09, p = 0.047) significantly affected the postoperative HKA angle. In conclusion, larger preoperative varus deformity, smaller bearing size, greater varus alignment of the tibial component, and lower BMI lead to greater postoperative varus alignment of the lower limb in Oxford MUKA. With this concept, surgeons can more accurately predict postoperative lower limb alignment and avoid malalignment in Oxford MUKA.

The association between bone density of lumbar spines and different daily protein intake in different renal function.

BACKGROUND: Low protein intake (LPI) has been suggested as a treatment for chronic kidney disease (CKD). However, protein intake is essential for bone health. METHODS: We studied the database of the National Health and Nutrition Examination Survey, 2005-2010. Basic variables, metabolic diseases, and bone density of different femoral areas were stratified into four subgroups according to different protein intake (DPI) (that is, <0.8, 0.8-1.0, 1.0-1.2, and >1.2 g/kg/day). RESULTS: Significant differences were found among all lumbar area bone mineral density (BMD) and T-scores (p < 0.0001). There was an apparent trend between a decreasing BMD in the CKD groups with increasing DPI in all single lumbar spines (L1, L2, L3, and L4) and all L spines (L1-L4). Compared with DPI (0.8-1.0 g/day/kg), higher risks of osteoporosis were noticed in the subgroup of >1.2 g/day/kg over L2 (relative risk (RR)=1.326, 95% confidence interval (CI)=1.062-1.656), subgroup >1.2 g/day/kg over L3 (RR = 1.31, 95%CI = 1.057-1.622), subgroup <0.8 g/day/kg over L4 (RR = 1.276, 95%CI = 1.015-1.605), subgroup <0.8 g/day/kg over all L spines (RR = 11.275, 95%CI = 1.051-1.548), and subgroup >1.2 g/day/kg over all L spines (RR = 0.333, 95%CI = 1.098-1.618). However, a higher risk of osteoporosis was observed only in the non-CKD group. There was an apparent trend of higher DPI coexisting with lower BMD and T scores in patients with CKD. For osteoporosis (reference:0.8-1.0 g/day/kg), lower (<0.8 g/day/kg) or higher DPI (>1.2 g/day/kg) was associated with higher risks in the non-CKD group, but not in the CKD group. CONCLUSIONS: In the CKD group, LPI for renal protection was safe without threatening L spine bone density and without causing a higher risk of osteoporosis.

A low-protein diet should be encouraged in patients with CKD, but protein is essential for bone health. In this study, we showed that a low-protein diet did not affect lumbar bone density. Therefore, in the care of CKD, a low-protein diet is beneficial for renal function and without harm to lumbar bone health.

The joint effects of physical activity and sleep duration on risk of osteoporosis in Taiwanese adult population: The Taiwan Biobank Study.

Most studies investigating the association between physical activity and osteoporosis prevention only focused on specific types of physical activity. This study's evidence regarding the combined effects or interaction of sleep duration and physical activity. The findings emphasize the role of sleep duration and physical activity in association with osteoporosis. PURPOSE: The associations between physical activity, sleep duration, and prevalent osteoporosis in Taiwanese adults were studied in this cross-sectional study. METHODS: The Taiwan Biobank enrolled a community-based cohort of ~ 120,000 volunteers (as of April 30, 2020) between 30 and 76 years of age with no history of cancer. Amongst, bone mineral density (BMD) measures by dual-energy X-ray absorptiometry (DXA) were available in 22,402 participants. After excluding individuals who had no complete data of BMI (n = 23), MET score (n = 207), T-score (n = 8,826), and sleep duration (n = 16), 13,330 subjects were included as the primary cohort. Univariate and multivariable regression analyses were performed to determine the associations between the presence of osteoporosis, physical activity level, sleep duration, and other variables. RESULTS: The results showed that after adjustment, subjects with physical activity < 20 METs/week and ≥ 20 METs/week (aOR = 1.017 and 0.767, respectively) were associated with risk of osteoporosis than those with zero MET. The odds of osteoporosis were not significantly lower in subjects who slept for ≥ 8 h/day (aOR = 0.934,p=0.266). In addition, compared to short sleepers with no physical activity, adults with increased physical activity ≥ 20 METs/week and sleep ≥ 8 h/day had a significantly lowest likelihood of osteoporosis (aOR = 0.702). Those with medium physical activity (< 20 METs/week) plus average sleep duration (6.5-8 h/day) did not have significant higher odds of osteoporosis (aOR = 1.129,p=0.151). CONCLUSION: The findings emphasize the joint role of sleep duration and physical activity in association with osteoporosis. Adults with high physical activity plus high sleep hours have the highest BMD and lowest risk of osteoporosis.

Comparative Biomechanical Analysis of Unilateral, Bilateral, and Lateral Pedicle Screw Implantation in Oblique Lumbar Interbody Fusion: A Finite Element Study.

Oblique lumbar interbody fusion (OLIF) can be combined with different screw instrumentations. The standard screw instrumentation is bilateral pedicle screw fixation (BPSF). However, the operation is time consuming because a lateral recumbent position must be adopted for OLIF during surgery before a prone position is adopted for BPSF. This study aimed to employ a finite element analysis to investigate the biomechanical effects of OLIF combined with BPSF, unilateral pedicle screw fixation (UPSF), or lateral pedicle screw fixation (LPSF). In this study, three lumbar vertebra finite element models for OLIF surgery with three different fixation methods were developed. The finite element models were assigned six loading conditions (flexion, extension, right lateral bending, left lateral bending, right axial rotation, and left axial rotation), and the total deformation and von Mises stress distribution of the finite element models were observed. The study results showed unremarkable differences in total deformation among different groups (the maximum difference range is approximately 0.6248% to 1.3227%), and that flexion has larger total deformation (5.3604 mm to 5.4011 mm). The groups exhibited different endplate stress because of different movements, but these differences were not large (the maximum difference range between each group is approximately 0.455% to 5.0102%). Using UPSF fixation may lead to higher cage stress (411.08 MPa); however, the stress produced on the endplate was comparable to that in the other two groups. Therefore, the length of surgery can be shortened when unilateral back screws are used for UPSF. In addition, the total deformation and endplate stress of UPSF did not differ much from that of BPSF. Hence, combining OLIF with UPSF can save time and enhance stability, which is comparable to a standard BPSF surgery; thus, this method can be considered by spine surgeons.

Optimizing Spinal Fusion Cage Design to Improve Bone Substitute Filling on Varying Disc Heights: A 3D Printing Study.

The success of spinal fusion surgery relies on the precise placement of bone grafts and minimizing scatter. This study aims to optimize cage design and bone substitute filling methods to enhance surgical outcomes. A 3D printed lumbar spine model was utilized to implant 3D printed cages of different heights (8 mm, 10 mm, 12 mm, and 14 mm) filled with BICERA® Bone Graft Substitute mixed with saline. Two filling methods, SG cage (side hole for grafting group, a specially designed innovative cage with side hole, post-implantation filling) and FP cage (finger-packing group, pre-implantation finger packing, traditional cage), were compared based on the weight of the implanted bone substitute. The results showed a significantly higher amount of bone substitute implanted in the SG cage group compared to the FP cage group. The quantity of bone substitute filled in the SG cage group increased with the height of the cage. However, in the FP cage group, no significant difference was observed between the 12 mm and 14 mm subgroups. Utilizing oblique lumbar interbody fusion cages with side holes for bone substitute filling after implantation offers several advantages. It reduces scatter and increases the amount of implanted bone substitute. Additionally, it effectively addresses the challenge of insufficient fusion surface area caused by gaps between the cage and endplates. The use of cages with side holes facilitates greater bone substitute implantation, ultimately enhancing the success of fusion. This study provides valuable insights for future advancements in oblique lumbar interbody fusion cage design, highlighting the effectiveness of using cages with side holes for bone substitute filling after implantation.

Surgical outcomes of anterior lumbar interbody fusion in revision lumbar interbody fusion surgery.

BACKGROUNDS: Anterior lumbar interbody fusion (ALIF) is an attractive option for revision lumbar interbody fusion as it provides wide access for implant removal and accommodation of large interbody grafts for fusion. However, revision lumbar interbody fusion surgery has not been found to result in significantly better functional outcomes compared with other approaches. To date, no prognostic factors of anterior lumbar interbody fusion in revision lumbar interbody fusion have been reported. In this study, we investigated the surgical results and possible prognostic factors of anterior lumbar interbody fusion in revision lumbar interbody fusion. METHODS: Patients who received revision interbody fusion surgery between January 2010 and May 2018 in our hospital were reviewed. Clinical outcomes were determined according to whether the VAS score improvement in back pain and leg pain reached the minimum clinically important difference (MCID) and Macnab criteria. Radiographic outcomes were assessed with fusion rate, preoperative, and postoperative lumbar lordosis. Operative-relative factors that may affect clinical outcomes, such as BMI, existence of cage migration, cage subsidence, pseudarthrosis, previous procedure, and number of fusion segments, were collected and analyzed. RESULTS: A total of 22 consecutive patients who received ALIF for revision interbody fusion surgery were included and analyzed. There were 9 men and 13 women with a mean age at operation of 56 years (26-78). The mean follow-up was 73 months (20-121). The minimal clinically important difference (MCID) was reached in 11 (50%) of the patients for back pain and 14 (64%) for leg pain. According to the modified Macnab criteria, 73% of the patients in this study had successful outcomes (excellent or good). The pain and lumbar lordosis had significant improvement (P < 0.05). Preoperative fusion segment ≥ 2 was shown to be a poor prognostic factor for back pain improvement reaching MCID (P = 0.043). CONCLUSIONS: ALIF has proven effective for revision lumbar fusion surgery, yielding positive clinical and radiographic results. However, having two or more preoperative fusion segments can negatively impact back pain improvement. LEVEL OF EVIDENCE: IV.

Improving Visualization of Osteochondritis Dissecans Using Delay-Multiply-and-Sum Reconstruction.

OBJECTIVE: Osteochondritis dissecans (OCD) of the capitellum is a joint defect that is common among adolescent athletes. It is important to diagnose OCD as early as possible, because early-stage OCD lesions have a high rate of spontaneous healing with rest. Medical ultrasound could potentially be used as a screening tool for OCD but is limited by the use of delay-and-sum (DAS) reconstruction. In this study, we tested conventional delay-multiply-and-sum (DMAS) and novel low-pass DMAS reconstruction algorithms for better visualization of OCD lesions. METHODS: We created phantom and cadaveric OCD models that simulated a range of OCD lesion severities and stabilities. We also imaged an in vivo case of OCD in a patient study. In the reconstructed images, several profiles were taken to measure OCD lesion contrast, cartilage contrast, crack thickness error and bone interface clarity. RESULTS: In the phantom and cadaveric OCD models, we found that histogram-matched conventional DMAS reconstruction improved lesion contrast by up to 16%, cartilage contrast by 26% and bone interface clarity by 15% on average compared with DAS reconstruction. Histogram-matched low-pass DMAS reconstruction improved lesion contrast by up to 22%, cartilage contrast by 45%, and bone interface clarity by 29% on average compared with DAS reconstruction. In the in vivo case of OCD, we found that histogram-matched conventional and low-pass DMAS reconstruction improved lesion contrast by 22% and 26%, respectively. CONCLUSION: The application of DMAS reconstruction improved the ability of medical ultrasound to detect OCD lesions of the capitellum when compared with DAS reconstruction.

Comparison of radiographic and clinical outcomes between ALIF, OLIF, and TLIF over 2-year follow-up: a comparative study.

BACKGROUND: Regarding the increasing adoption of oblique lateral interbody fusion (OLIF) for treating degenerative lumbar disorders, we aimed to evaluate whether OLIF, one of the options for anterolateral approach lumbar interbody fusion, demonstrate clinical superiority over anterior lumbar interbody fusion (ALIF) or posterior approach, represented by transforaminal lumbar interbody fusion (TLIF). METHODS: Patients who received ALIF, OLIF, and TLIF for symptomatic degenerative lumbar disorders during the period 2017-2019 were identified. Radiographic, perioperative, and clinical outcomes were recorded and compared during 2-year follow-up. RESULTS: A total of 348 patients with 501 correction levels were enrolled in the study. Fundamental sagittal alignment profiles were substantially improved at 2-year follow-up, particularly in the anterolateral approach (A/OLIF) group. The Oswestry disability index (ODI) and EuroQol-5 dimension (EQ-5D) in the ALIF group were superior when compared to the OLIF and TLIF group 2-year following surgery. However, comparisons of VAS-Total, VAS-Back, and VAS-Leg revealed no statistically significance across all approaches. TLIF demonstrated highest subsidence rate of 16%, while OLIF had least blood loss and was suitable for high body mass index patients. CONCLUSIONS: Regarding treatment for degenerative lumbar disorders, ALIF of anterolateral approach demonstrated superb alignment correction and clinical outcome. Comparing to TLIF, OLIF possessed advantage in reducing blood loss, restoring sagittal profiles and the accessibility at all lumbar level while simultaneously achieving comparable clinical improvement. Patient selection in accordance with baseline conditions, and surgeon preference both remain crucial issues circumventing surgical approach strategy.

Correlation of Foraminal Parameters with Patient-Reported Outcomes in Patient with Degenerative Lumbar Foraminal Stenosis.

The relationship between quantitative anatomic parameters in MRI and patient-reported outcomes (PROs) before and after surgery in degenerative lumbar foraminal stenosis remains unknown. We included 58 patients who underwent transforaminal lumbar interbody fusion (TLIF) for single-level degenerative disc disease with foraminal stenosis between February 2013 and June 2020. PROs were evaluated using the visual analog scale (VAS) for back and leg pain, Oswestry Disability Index (ODI), and EuroQol-5D (EQ-5D). The foraminal parameters assessed using preoperative MRI included foraminal height, posterior intervertebral disc height, superior and inferior foraminal width, and foraminal area. The correlation between foraminal parameters and PROs before operation, at 1 year follow-up, and change from baseline were assessed. The associations between the aforementioned parameters were examined using linear regression analysis. The analysis revealed that among these parameters, superior foraminal width was found to be significantly correlated with ODI and EQ-5D at the 1 year follow-up and with change in ODI and EQ-5D from baseline. The associations remained significant after adjustment for confounding factors including age, sex, body mass index, and duration of hospital stay. The results indicated that in degenerative lumbar foraminal stenosis, decreased superior foraminal width was associated with better improvement in disability and quality of life after TLIF.

Anterior mid-portion capsular tear with Bankart lesion in recurrent anterior shoulder dislocation: outcome report and bone defect evaluation.

INTRODUCTION: This study aimed to report the incidence of anterior mid-portion capsular tears identified during arthroscopic Bankart repair (ABR), the clinical outcomes of repairing this combined lesion, and to evaluate the associated bone defects. METHODS: We retrospectively reviewed the records of patients undergoing ABR between January 2014 and December 2017. Data from patients with capsular tears identified during ABR were included and analyzed. Age, number of dislocations, repair technique, follow-up results, and X-rays were reviewed. The size of the glenoid defect and Hill-Sachs lesion were reviewed via magnetic resonance imaging or magnetic resonance arthrography (MRA). RESULTS: Records of 95 patients undergoing ABR during the study period were reviewed, and nine were included. The overall incidence of capsular tears was 9.5% and the mean age at surgery was 45.3 ± 14.3 years. All cases had > 3 dislocations before treatment. All patients had labral lesions, and one had a glenoid defect. Hill-Sachs lesions were observed in eight patients. Seven patients underwent MRA examination, and all seven showed axillary pouch disruption. Over 3.9 ± 1.1 years of follow-up, there was no instability recurrence, and Rowe scores improved from 42.2 to 96.7 (p < 0.001). CONCLUSIONS: There was no recurrent shoulder instability after combined arthroscopic repair of capsular and Bankart lesions. There were Rowe score improvements over at least three years of follow-up. Although our case number was small, we found that mid-portion capsular tear occurred in patients over 30 years with multiple recurrent dislocations, with or without small glenoid bone defects, and with axillary pouch disruption on MRA images.

Pre-operative anemia was associated with all-cause mortality in patients with vertebral fracture who underwent percutaneous vertebroplasty.

Purpose: We investigated the association between pre-operative anemia and long-term all-cause mortality in patients with vertebral fracture who underwent a vertebroplasty. Materials and methods: We retrospectively selected patients who were admitted for vertebroplasty for vertebral compression fracture between 2013 and 2020. Patients who had pathologic fractures or had no assessment of bone mineral density were excluded. Relevant information was collected from electronic medical records. Patients' survival status was confirmed at the end of March 2021. Cox-proportional hazard models were conducted to examine the effects of anemia (<12 g/dL vs. ≥12 g/dL) and pre-operative hemoglobin levels (as a continuous variable) on all-cause mortality with multivariate adjustments. Results: A total of 167 patients were analyzed (mean age 75.8 ± 9.3 years, male 25.7%). After a median follow-up duration of 2.1 years, pre-operative anemia (hemoglobin <12 g/dL vs. ≥12 g/dL) was independently associated with a higher risk of all-cause mortality (hazard ratio 2.762, 95% CI 1.184 to 6.442, p = 0.019). An increase in pre-operative hemoglobin was associated with a lower risk of all-cause mortality after multivariate adjustment (hazard ratio 0.775, 95% CI 0.606 to 0.991, p = 0.042). Conclusion: Pre-operative anemia (<12 g/dL) was independently associated with survival outcome among patients with vertebral compression fractures who underwent vertebroplasty. Our findings highlight anemia as a risk factor of long-term mortality in this elderly surgical population.

Association of Body Mass Index with Long-Term All-Cause Mortality in Patients Who Had Undergone a Vertebroplasty for a Vertebral Compression Fracture.

We aimed to investigate the association between preoperative body mass index (BMI) and postoperative long-term mortality in patients who underwent a vertebroplasty. We retrospectively enrolled patients with a vertebral compression fracture who underwent a vertebroplasty between May 2013 and June 2020 in a medical center in Taiwan. The survival status of the study sample was confirmed by the end of March 2021. Cox-proportional hazard models were conducted to examine the effects of being overweight/obese (≥25 kg/m2 vs. <25 kg/m2) and BMI (as a continuous variable) on all-cause mortality after adjusting for age, sex, history of smoking, diabetes, hypertension, chronic kidney disease, and osteoporosis. A total of 164 patients were analyzed (mean age 75.8 ± 9.3 years, male 25.6%, mean BMI 24.0 ± 4.1 kg/m2) after a median follow-up of 785 days. Compared with a BMI < 25 kg/m2, a BMI ≥ 25 kg/m2 was associated with a significantly lower risk of all-cause mortality (HR 0.297, 95% CI 0.101 to 0.878, p = 0.028). These findings were consistent when BMI was examined as a continuous variable (HR 0.874, 95% CI 0.773 to 0.988, p = 0.031). A low BMI (<22 kg/m2) should be considered as a risk factor for postoperative long-term mortality in this ageing population.

Biomechanical effects of different numbers and locations of screw-in clavicle hook plates.

Purpose: We sought to analyze the biomechanical effects which both different numbers and locations of screws have on three different clavicle hook plates, as well as any possible causes of sub-acromial bone erosion and peri-implant clavicular fractures. Methods: This study built thirteen groups of finite element models using three different clavicle hook plates (short plates, long plates, and posterior hook offset plates) in varying numbers and locations of the screws. The von Mises stress distribution of the clavicle and hook plate, as well as the reaction force of the acromion was evaluated. Results: The results show that inserting screws in all available screw holes on the hook plate produces a relatively large reaction force on the acromion, particularly in the axial direction of the bone plate. The fewer the screws implanted into the clavicle hook plate, the larger the area of high-stress distribution there is in the middle of the clavicle, and also, the higher the stress distribution on the clavicle hook plate. Conclusion: This study provides orthopedic physicians with the biomechanical analysis of different numbers and locations of screws in clavicle hook plates to help minimize surgical complications.

Indirect decompression via oblique lumbar interbody fusion is sufficient for treatment of lumbar foraminal stenosis.

Oblique lumbar interbody fusion (OLIF) is a popular technique for the treatment of degenerative lumbar spinal disease. There are no clear guidelines on whether direct posterior decompression (PD) is necessary after OLIF. The purpose of this study was to analyze the effect of the indirect decompression obtained from OLIF in patients with lumbar foraminal stenosis. We retrospectively reviewed 33 patients who underwent OLIF surgery for degenerative lumbar spinal disease between 1 January 2018, and 30 June 2019. The inclusion criteria included patients who were diagnosed with lumbar foraminal stenosis by preoperative MRI. The exclusion criteria included the presence of central canal stenosis, spinal infection, vertebral fractures, and spinal malignancies. The clinical results, evaluated using the visual analogue scale of back pain (VAS-Back), VAS of leg pain (VAS-Leg), and Oswestry disability index (ODI), were recorded. The radiologic parameters were also measured. The VAS-Back, VAS-Leg, and ODI showed significant improvement in both the PD and non-posterior decompression (Non-PD) groups postoperatively (all, p < 0.05). Patients in the Non-PD group showed better results than those in the PD group in the VAS-Back at 12- and 24 months postoperatively (0.00 vs. 3.00 postoperatively at 12 months, p = 0.030; 0.00 vs. 4.00 postoperatively at 24 months, p = 0.009). In addition, the ODI at 24 months postoperatively showed better improvement in the Non-PD group (8.89 vs. 24.44, p = 0.038). The disc height in both the PD and the Non-PD groups increased significantly postoperatively (all, p < 0.05), but the restoration of foraminal height was significantly different only in the Non-PD group. There was no statistically significant difference in cage position, cage subsidence, fusion grade, or screw loosening between the PD and the Non-PD groups. Indirect decompression via OLIF for lumbar foraminal stenosis showed favorable outcomes. The use of interbody cages and posterior instrumentation was sufficient for relieving symptoms in patients with lumbar foraminal stenosis. Additional direct posterior decompression may deteriorate results in the follow-up period.