RESUMO
A large amount of nuclear waste produced in the process of nuclear energy utilization has always been a key problem to be solved urgently for nuclear safety. At present, "deep geological disposal" is a feasible method and generally accepted by many countries. The oxygen content in the near field environment of the waste container will decrease to anaerobic conditions, and hydrogen will permeation into the internal materials of container for a long time. Hydrogen evolution corrosion may cause a risk of hydrogen embrittlement. The harm of hydrogen embrittlement in metal container is far more severe than predictable uniform corrosion. It is a research hotspot that the microorganisms impact on the corrosion behavior of container materials in the deep geological environment. Microbial corrosion in deep geological environments can be divided into two types: aerobic microbial corrosion and anaerobic microbial corrosion. There is a type of hydrogen consuming microorganism in the natural environment that uses the oxidation of hydrogen as the energy for its life activities. This provides a new approach for us to study reducing the hydrogen embrittlement sensitivity of nuclear waste container materials.
RESUMO
Methane pyrolysis (MP) is a potential technology for CO2-free hydrogen production that generates only solid carbon by-products. However, developing a highly efficient catalyst for stable methane pyrolysis at a moderate temperature has been challenging. We present a new and highly efficient catalyst created by modifying a Ni-Bi liquid alloy with the addition of Mo to produce a ternary NiMo-Bi liquid alloy catalyst (LAC). This catalyst exhibited a considerably low activation energy of 81.2 kilojoules per mole, which enabled MP at temperatures between 450 and 800 Celsius and a hydrogen generation efficiency of 4.05 ml per gram of nickel per minute. At 800 Celsius, the catalyst exhibited 100% H2 selectivity and 120 hours of stability.
RESUMO
BACKGROUND: After major liver resection, the volume status of patients is still undetermined. However, few concerns have been raised about postoperative fluid management. We aimed to compare gut function recovery and short-term prognosis of the patients after laparoscopic liver resection (LLR) with or without inferior vena cava (IVC) respiratory variability-directed fluid therapy in the anesthesia intensive care unit (AICU). METHODS: This randomized controlled clinical trial enrolled 70 patients undergoing LLR. The IVC respiratory variability was used to optimize fluid management of the intervention group in AICU, while the standard practice of fluid management was used for the control group. The primary outcome was the time to flatus after surgery. The secondary outcomes included other indicators of gut function recovery after surgery, postoperative length of hospital stay (LOS), liver and kidney function, the severity of oxidative stress, and the incidence of severe complications associated with hepatectomy. RESULTS: Compared with patients receiving standard fluid management, patients in the intervention group had a shorter time to anal exhaust after surgery (1.5â±â0.6 days vs. 2.0â±â0.8 days) and lower C-reactive protein activity (21.4 [95% confidence interval (CI): 11.9-36.7] mg/L vs. 44.8 [95%CI: 26.9-63.1] mg/L) 24 h after surgery. There were no significant differences in the time to defecation, serum concentrations of D -lactic acid, malondialdehyde, renal function, and frequency of severe postoperative complications as well as the LOS between the groups. CONCLUSION: Postoperative IVC respiratory variability-directed fluid therapy in AICU was facilitated in bowel movement but elicited a negligible beneficial effect on the short-term prognosis of patients undergoing LLR. TRIAL REGISTRATION: ChiCTR-INR-17013093.
Assuntos
Hepatectomia , Laparoscopia , Humanos , Veia Cava Inferior/cirurgia , Fígado , HidrataçãoRESUMO
CO poisoning of Pt-group metal catalysts is a long-standing problem, particularly for hydrogen oxidation reaction in proton exchange membrane fuel cells. Here, we report a catalyst of Ru oxide-coated Ru supported on TiO2 (Ru@RuO2/TiO2), which can tolerate 1-3% CO, enhanced by about 2 orders of magnitude over the classic PtRu/C catalyst, for hydrogen electrooxidation in a rotating disk electrode test. This catalyst can work stably in 1% CO/H2 for 50 h. About 20% of active sites can survive even in a pure CO environment. The high CO tolerance is not via a traditional bifunctional mechanism, i.e., oxide promoting CO oxidation, but rather via hydrous metal oxide shell blocking CO adsorption. An ab initio molecular dynamics (AIMD) simulation indicates that water confined in grain boundaries of the Ru oxide layer and Ru surface can suppress the diffusion and adsorption of CO. This oxide blocking layer approach opens a promising avenue for the design of high CO-tolerant electrocatalysts for fuel cells.
RESUMO
Developing highly efficient and reversible hydrogenation-dehydrogenation catalysts shows great promise for hydrogen storage technologies with highly desirable economic and ecological benefits. Herein, we show that reaction sites consisting of single Pt atoms and neighboring oxygen vacancies (VO) can be prepared on CeO2 (Pt1/CeO2) with unique catalytic properties for the reversible dehydrogenation and rehydrogenation of large molecules such as cyclohexane and methylcyclohexane. Specifically, we find that the dehydrogenation rate of cyclohexane and methylcyclohexane on such sites can reach values above 32,000 molH2 molPt-1 h-1, which is 309 times higher than that of conventional supported Pt nanoparticles. Combining of DRIFTS, AP-XPS, EXAFS, and DFT calculations, we show that the Pt1/CeO2 catalyst exhibits a super-synergistic effect between the catalytic Pt atom and its support, involving redox coupling between Pt and Ce ions, enabling adsorption, activation and reaction of large molecules with sufficient versatility to drive abstraction/addition of hydrogen without requiring multiple reaction sites.
RESUMO
BACKGROUND: The validation of inferior vena cava (IVC) respiratory variation for predicting volume responsiveness is still under debate, especially in spontaneously breathing patients. The present study aims to verify the effectiveness and accuracy of IVC variability for volume assessment in the patients after abdominal surgery under artificially or spontaneously breathing. METHODS: A total of fifty-six patients after abdominal surgeries in the anesthesia intensive care unit ward were included. All patients received ultrasonographic examination before and after the fluid challenge of 5 ml/kg crystalloid within 15 min. The same measurements were performed when the patients were extubated. The IVC diameter, blood flow velocity-time integral of the left ventricular outflow tract, and cardiac output (CO) were recorded. Responders were defined as an increment in CO of 15% or more from baseline. RESULTS: There were 33 (58.9%) mechanically ventilated patients and 22 (39.3%) spontaneously breathing patients responding to fluid resuscitation, respectively. The area under the curve was 0.80 (95% CI: 0.68-0.90) for the IVC dimeter variation (cIVC1) in mechanically ventilated patients, 0.87 (95% CI: 0.75-0.94) for the collapsibility of IVC (cIVC2), and 0.85 (95% CI: 0.73-0.93) for the minimum IVC diameter (IVCmin) in spontaneously breathing patients. The optimal cutoff value was 15.32% for cIVC1, 30.25% for cIVC2, and 1.14 cm for IVCmin. Furthermore, the gray zone for cIVC2 was 30.72 to 38.32% and included 23.2% of spontaneously breathing patients, while 17.01 to 25.93% for cIVC1 comprising 44.6% of mechanically ventilated patients. Multivariable logistic regression analysis indicated that cIVC was an independent predictor of volume assessment for patients after surgery irrespective of breathing modes. CONCLUSION: IVC respiratory variation is validated in predicting patients' volume responsiveness after abdominal surgery irrespective of the respiratory modes. However, cIVC or IVCmin in spontaneously breathing patients was superior to cIVC in mechanically ventilated patients in terms of clinical utility, with few subjects in the gray zone for the volume responsiveness appraisal. TRIAL REGISTRATION: ChiCTR-INR-17013093 . Initial registration date was 24/10/2017.
Assuntos
Hidratação , Veia Cava Inferior , Débito Cardíaco/fisiologia , Humanos , Unidades de Terapia Intensiva , Ultrassonografia , Veia Cava Inferior/diagnóstico por imagemRESUMO
We demonstrated how the special synergy between a noble metal single site and neighboring oxygen vacancies provides an "ensemble reaction pool" for high hydrogen generation efficiency and carbon dioxide (CO2) selectivity of a tandem reaction: methanol steam reforming. Specifically, the hydrogen generation rate over single site Ru1/CeO2 catalyst is up to 9360 mol H2 per mol Ru per hour (579 mLH2 gRu-1 s-1) with 99.5% CO2 selectivity. Reaction mechanism study showed that the integration of metal single site and O vacancies facilitated the tandem reaction, which consisted of methanol dehydrogenation, water dissociation, and the subsequent water gas shift (WGS) reaction. In addition, the strength of CO adsorption and the reaction activation energy difference between methanol dehydrogenation and WGS reaction play an important role in determining the activity and CO2 selectivity. Our study paves the way for the further rational design of single site catalysts at the atomic scale. Furthermore, the development of such highly efficient and selective hydrogen evolution systems promises to deliver highly desirable economic and ecological benefits.
RESUMO
Single-site catalysts have drawn broad attention in catalysis because of their maximum atomic utilization and unique catalytic performance. Early work in our group has shown a 40-fold higher activity of methanol decomposition over single-site Pt1/CeO2 catalyst than CeO2 supported 2.5 nm Pt nanoparticles, while a molecular-level understanding of such enhancement is lacking. Herein, the reaction mechanism of methanol decomposition over Pt1/CeO2 was carefully investigated using in situ DRIFTS, and a reaction pathway was proposed. Methanol molecules were dissociatively adsorbed on nanoceria support first, followed by the diffusion of as-formed methoxy species onto Pt single sites where the dehydrogenation occurs and results in the weakly bonded CO. The ease of methanol dissociative adsorption on nanoceria support and the tailored electronic property of Pt1 via the metal-support interaction are believed to be strongly correlated with the high activity of Pt1/CeO2.
RESUMO
We demonstrate that the single-site catalyst Pt1/CeO2 greatly enhances the selectivity of cyclization and aromatization in the n-hexane reforming reaction. Specifically, the selectivity of single-site Pt1/CeO2 toward both cyclization and aromatization is above 86% at 350 °C. The turnover frequency of Pt1/CeO2 is 58.8 h-1 at 400 °C, which is close to that of Pt cluster/CeO2 (61.4 h-1) and much higher than that of Pt nanoparticle/CeO2 with Pt sizes of 2.5 and 7 nm. On the basis of the catalytic results for methylcyclopentane reforming, the dehydrocyclization and further aromatization of n-hexane are attributed to the prominent adsorption of ring intermediate products on the single-site Pt1/CeO2 catalysts. On the other side, with the multiple Pt adjacent active sites, the cluster and nanoparticle Pt/CeO2 samples favor the C-C bond cracking reaction. Ultimately, this in-depth study unravels the principles of hydrocarbon activation with different Pt sizes and represents a key step toward the rational design of new heterogeneous catalysts.
RESUMO
BACKGROUND: The postoperative analgesic effect of transmuscular quadratus lumborum block (QLB-TM) in patients following lower abdominal surgeries has been identified; however, the efficacy of QLB using the lateral approach (QLB-L) is still in debate. Therefore, this retrospective study was conducted to investigate the effect of a single-shot block with QLB-L on postoperative analgesia for patients undergoing percutaneous nephrolithotomy (PCNL). METHODS: The medical information of the patients undergoing PCNL was retrieved from the electronic charter system (Medisystem, Suzhou, China) in our Nanjing Drum Tower Hospital during the period of Jan/2019 to Jun/2019. Among the total of 57 patients, there are 17, 18, and 22 patients subjected to QLB-L, QLB-TM, or routine treatment, respectively. The primary observational parameter was to assess postoperative pain with visual analog scales (VAS) at rest 30 min after extubation, 24 h, and 48 h after surgery, respectively. The secondary observatory endpoints, including the consumption of intraoperative opioids, the cumulative dose of non-steroid anti-inflammatory drugs (NSAIDs) and the incidence of adverse events related to postoperative analgesia, were evaluated as well. RESULTS: The static VAS score at 24 h after surgery and the intraoperative consumption of sufentanil were significantly lower in patients receiving either intervention of QLB-L or QLB-TM as compared with those receiving routine treatment. However, one shot of QLB had no impact on VAS scores at 30 min post-extubation, 48 h after PCNL procedure compared with the patients receiving routine treatment. The percentage of non-ambulatory patients within 24 h post-PCNL was significantly higher in the QLB-TM group compared with the routine treatment group (P = 0.04). There were no significant differences in the incidence of postoperative nausea and vomit (PONV), itches, respiratory depression, the time for the first defecation, and the length of hospital stay (LOS) among the three groups. CONCLUSIONS: QLB-L procedure may exert as equivalent as QLB-TM in terms of abrogating postoperative pain within 24 h post-surgery and decreasing intraoperative sufentanil consumption in patients undergoing PCNL procedure as well. The caution should be taken to avoid lower extremities weakness in the patients after QLB-TM within the first 24 h post-PCNL procedure.
Assuntos
Músculos Abdominais/diagnóstico por imagem , Anestésicos Locais/administração & dosagem , Nefrolitotomia Percutânea/efeitos adversos , Bloqueio Nervoso/métodos , Dor Pós-Operatória/diagnóstico , Dor Pós-Operatória/prevenção & controle , Músculos Abdominais/efeitos dos fármacos , Músculos Abdominais/inervação , Adulto , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , Nefrolitotomia Percutânea/métodos , Medição da Dor/métodos , Dor Pós-Operatória/etiologia , Estudos Retrospectivos , Ultrassonografia de Intervenção/métodosRESUMO
Venous air embolism (VAE) is commonly one of the iatrogenic complications associated with divergent high-risk surgeries. In this case-series report, we presented a series of VAE cases in our institute during the last 6 consecutive years. There were total of nine cases suspected to be VAE according the clinical symptom and signs, of which seven cases were definitively diagnosed VAE using transthoracic echocardiography (TTE). We also reported two presumptive cases of paradoxical VAE during hepatectomy in this case series, furthermore, the cause, complications and hazards secondary to paradoxical VAE were discussed as well. All cases had an uneventful recovery from VAE with the assistance of TTE as well as other therapeutic management of VAE, except one neurosurgical patient died from postoperative hemorrhagic stroke per se. Therefore, VAE or paradoxical air embolism can occur during various non-cardiac operations and the significance of perioperative ultrasound should be emphasized in the treatment of VAE.
RESUMO
BACKGROUND: The risk factors for patients with major postoperative complications immediately after liver resection have been identified; however, the intermediate and long-term prognoses for these patients have yet to be determined. AIM: To evaluate the factors responsible for the long-term recurrence-free survival rate in patients with hepatocellular carcinoma (HCC) following anatomic hepatectomy. METHODS: We performed a retrospective analysis of 74 patients with HCC who underwent precise anatomic hepatectomy at our institution from January 2013 to December 2015. The observational endpoints for this study were the tumor recurrence or death of the HCC patients. The overall follow-up duration was three years. The recurrence-free survival curves were plotted by the Kaplan-Meier method and were analyzed by the log-rank test. The value of each variable for predicting prognosis was assessed via multivariate Cox proportional hazards regression analysis. RESULTS: The 1-year and 3-year recurrence-free survival rates of HCC patients were 68.92% and 55.41%, respectively, following anatomic liver resection. The results showed that the 3-year recurrence-free survival rate in HCC patients was closely related to preoperative cirrhosis, jaundice level, tumor stage, maximal tumor diameter, complications of diabetes mellitus, frequency of intraoperative hypotensive episodes, estimated blood loss (EBL), blood transfusion, fluid infusion, and postoperative infection (P < 0.1). Based on multivariate analysis, preoperative cirrhosis, tumor stage, intraoperative hypotension, and EBL were identified to be predictors of 3-year recurrence-free survival in HCC patients undergoing anatomic hepatectomy (P < 0.05). CONCLUSION: Tumor stage and preoperative cirrhosis adversely affect the recurrence-free survival rate in HCC patients following anatomic hepatectomy. The long-term recurrence-free survival rate of patients with HCC is closely related to intraoperative hypotension and EBL.
RESUMO
In the last two decades, metal-organic frameworks (MOFs), as a class of porous crystalline materials formed by organic linkers coordinated-metal ions, have attracted increasing attention due to their unique structures and wide applications. Compared to single components, various well-designed MOF-based composites combining MOFs with other functional materials, such as nanoparticles, quantum dots, natural enzymes and polymers with remarkably enhanced or novel properties have recently been reported. To efficiently and directionally synthesize high-performance MOF-based composites for specific applications, it is vital to understand the structural-functional relationships and role of MOFs. In this review, preparation methods of MOF-based composites are first summarized and then the relationship between the structure and performance is determined. The functions of MOFs in practical use are classified and discussed through various examples, which may help chemists to understand the structural-functional relationship in MOF-based composites from a new perspective.
RESUMO
Hydrogen is regarded as an attractive alternative energy carrier due to its high gravimetric energy density and only water production upon combustion. However, due to its low volumetric energy density, there are still some challenges in practical hydrogen storage and transportation. In the past decade, using chemical bonds of liquid organic molecules as hydrogen carriers to generate hydrogen in situ provided a feasible method to potentially solve this problem. Research efforts on liquid organic hydrogen carriers (LOHCs) seek practical carrier systems and advanced catalytic materials that have the potential to reduce costs, increase reaction rate, and provide a more efficient catalytic hydrogen generation/storage process. In this work, we used methanol as a hydrogen carrier to release hydrogen in situ with the single-site Pt1/CeO2 catalyst. Moreover, in this reaction, compared with traditional nanoparticle catalysts, the single site catalyst displays excellent hydrogen generation efficiency, 40 times higher than 2.5 nm Pt/CeO2 sample, and 800 times higher compared to 7.0 nm Pt/CeO2 sample. This in-depth study highlights the benefits of single-site catalysts and paves the way for further rational design of highly efficient catalysts for sustainable energy storage applications.
RESUMO
Highly distributed Pd NPs supported on the surface of sulfonic acid functionalized metal organic frameworks (MIL-101-SO3H) were synthesized via a simple thermal decomposition method. The as-synthesized Pd/MIL-101-SO3H was used to catalyze a hydrogenation/esterification cascade reaction for the conversion of biomass derivatives (furoic acid) into high value chemicals (ethyl tetrahydro-2-furoate).
RESUMO
Tandem catalysis (i.e., a process in which a desirable product is synthesized by a one-step process consisting of sequential reactions) has attracted intensive attention owing to its sustainable green and atom-economical characteristics. In this process, the utilization of a high-efficiency multifunctional catalyst is key. However, different functional sites integrated within the catalyst are required to be rationally designed and precisely engineered to guarantee the synergy between the catalytic reactions. Herein, a novel kind of hydrogenation-esterification tandem catalyst with metal/acid (alloy/polyoxometalates) active sites integrated within the metal-organic frameworks (MOFs) was prepared by a facile self-sacrificial template route. In this tandem catalyst, the MOF cavities served as tandem reactors, the PtNi alloy sites encapsulated within the MOF material acted as hydrogenation sites, and the solid phosphotungstic acid embedded in the MOF cavities provided esterification sites. This well-designed tandem catalyst showed outstanding activity and selectivity towards the one-step synthesis of amino-ester-type anesthetics (e.g., benzocaine) owing to the synergistic catalysis of the metal and acid sites. Clearly, this novel tandem catalyst simplifies the traditional industry process and provides a new method to rationally construct new tandem catalysts.
RESUMO
Functional nanoparticles encapsulated within metal-organic frameworks (MOFs) as an emerging class of composite materials attract increasing attention owing to their enhanced or even novel properties caused by the synergistic effect between the two functional materials. However, there is still no ideal composite structure as platform to systematically analyze and evaluate the relation between the enhanced catalytic performance of composites and the structure of MOF shells. In this work, taking RhCoNi ternary alloy nanoflowers, for example, first the RhCoNi@MOF composite catalysts sheathed with different structured MOFs via a facile self-sacrificing template process are successfully fabricated. The structure type of MOF shells is easily adjustable by using different organic molecules as etchant and coordination reagent (e.g., 2,5-dihydroxyterephthalic acid or 2-methylimidazole), which can dissolve out the Co or Ni element in the alloy template in a targeted manner, thereby producing ZIF-67(Co) or MOF-74(Ni) shells accordingly. With the difference between the two MOF shells in the aperture sizes, the as-prepared two RhCoNi@MOF composites preform distinct size selectivity during the alkene hydrogenation. This work would help us to get more comprehensive understanding of the intrinsic role of MOFs behind the enhanced catalytic performance of nanoparticle@MOF composites.
RESUMO
Noble metal nanoparticles embedded in metal-organic frameworks (MOFs) are composite catalysts with enhanced or novel properties compared to the pristine counterparts. In recent years, to determine the role of MOFs during catalytic process, most studies have focussed on the confinement effect of MOFs, but ignored the structural flexibility of MOFs. In this study, we use two composite catalysts, Pt@ZIF-8 [Zn(mIM)2 , mIM=2-methyl imidazole] with flexible structure and Pt@ZIF-71 [Zn(DClIM)2 , DClIM=4,5-dichloroimidazole] with rigid structure, and hydrogenation of cinnamaldehyde as model reaction, to show the confinement effect and the structure flexibility of MOF matrices on the catalytic performance of composite catalysts. Both catalysts showed high selectivity for cinnamic alcohol with the confinement effect of the aperture. But, compared to Pt@ZIF-71, Pt@ZIF-8 exhibited higher conversion but lower selectivity owing to the flexible structure. The above results remind us that we will have to consider both the aperture size of MOFs and structure flexibility to select the proper MOF matrices for the composite materials to achieve the optimized performance.
RESUMO
For new composite materials with functional nanoparticles (NPs) embedded in metal organic frameworks (MOFs), rational design and precise control over their architectures are imperative for achieving enhanced performance and novel functions. Especially in catalysis, the activity and selectivity of such composite materials are strongly determined by the encapsulation state and thickness of the MOF shell, which greatly influences the diffusion and adsorption of substance molecules onto the NP surface. In this study, MOF-74(Ni)-encapsulated Rh-Ni hierarchical heterostructures (Rh-Ni@MOF-74(Ni)) were successfully constructed using magnetic Rh-Ni-alloyed nanoflowers (NFs) as a self-sacrificial template. Strikingly, the encapsulation state and thickness of the formed MOF shell were well-tuned via template dealloying by changing the Ni content in the Rh-Ni NFs template. More interestingly, such unique Rh-Ni composites encapsulated with MOFs as catalysts could be magnetically recyclable and exhibited enhanced catalytic performance for the selective hydrogenation of alkynes to cis products, owing to the confinement effect of the MOF shell, as compared to their pristine counterparts.
RESUMO
It is becoming a challenge to achieve simpler characterization and wider application of flexible metal organic frameworks (MOFs) exhibiting the gate-opening or breathing behavior. Herein, we designed an intelligent MOF-based system where the gate-opening or breathing behavior of MOFs can be facially visualized in solution. Two types of metal oxide@MOF core-shell heterostructures, ZnO@ZIF-7 and ZnO@ZIF-71, were prepared using ZnO nanorods as self-sacrificial templates. The structural flexibility of both the MOFs can be easily judged from the distinct molecular-size-related formation modes and photoelectrochemical performances between the two ZnO@ZIF heterostructures. Moreover, the rotational dynamics of the flexible parts of ZIF-7 were studied by analyzing the intrinsic physical properties, such as dielectric constants, of the structure. The present work reminds us to pay particular attention to the influences of the structural flexibility of MOFs on the structure and properties of MOF-involved heterostructures in future studies.