Controllable construction of ZIF-derived Co9S8 hollow polyporous polyhedrons with Ru-doping for enhanced hydrogen evolution reaction.

Ru-doped Co9S8 hollow porous polyhedrons (Ru-Co9S8 HPPs) derived from zeolitic-imidazolate-frameworks were synthesized through hydrothermal coprecipitation and thermal decomposition methods. The results indicate that Ru-Co9S8-500 HPPs possess a strong Ru-Co synergistic effect, large electrochemical surface area, and sufficient active sites, endowing them with excellent hydrogen evolution reaction performance.

RBM3 is associated with acute lung injury in septic mice and patients via the NF-κB/NLRP3 pathway.

Sepsis refers to host response disorders caused by infection, leading to life-threatening organ dysfunction. RNA-binding motif protein 3 (RBM3) is an important cold-shock protein that is upregulated in response to mild hypothermia or hypoxia. In this study, we aimed to investigate whether RBM3 is involved in sepsis-associated acute lung injury (ALI). Intraperitoneal injection of LPS (10 mg/kg) was performed in wild type (WT) and RBM3 knockout (KO, RBM3-/-) mice to establish an in vivo sepsis model. An NLRP3 inflammasome inhibitor, MCC950 (50 mg/kg), was injected intraperitoneally 30 min before LPS treatment. Serum, lung tissues, and BALF were collected 24 h later for further analysis. In addition, we also collected serum from sepsis patients and healthy volunteers to detect their RBM3 expression. The results showed that the expression of RBM3 in the lung tissues of LPS-induced sepsis mice and the serum of patients with sepsis was significantly increased and positively correlated with disease severity. In addition, RBM3 knockout (KO) mice had a low survival rate, and RBM3 KO mice had more severe lung damage, inflammation, lung cell apoptosis, and oxidative stress than WT mice. LPS treatment significantly increased the levels of nucleotide binding and oligomerization domain-like receptor family 3 (NLRP3) inflammasomes and mononuclear cell nuclear factor-κB (NF-κB) in the lung tissues of RBM3 KO mice. However, these levels were only slightly elevated in WT mice. Interestingly, MCC950 improved LPS-induced acute lung injury in WT and RBM3 KO mice but inhibited the expression of NLRP3, caspase-1, and IL-1ß. In conclusion, RBM3 was overexpressed in sepsis patients and LPS-induced mice. RBM3 gene deficiency aggravated sepsis-associated ALI through the NF-κB/NLRP3 pathway.

A ratiometric self-powered aptasensor for simultaneous detection of cortisol and progesterone based on spatially resolved tri-channel photofuel cell.

In this work, a self-powered sensor was proposed for simultaneous detection of two typical steroid hormones, namely cortisol (COR) and progesterone (P4). A tri-channel photofuel cell (PFC) consisting of three spatially resolved SnS2@SnO2 photoanodes and one Pt cathode was designed to generate the electricity to drive the sensing process under the control of a multiplex switch. Among three photoanodes, one served as the control, while the other two were modified with COR-binding or P4-binding aptamer to respond specifically to the COR or P4 target. The ratios of the inhibited PFC output from aptamer-immobilized photoanodes to the reference signal from the control photoanode were utilized for simultaneous detection of COR and P4. The results showed that the developed self-powered sensor exhibited broad concentration ranges toward targets, with COR concentration ranging from 1 nM to 1000 nM and P4 concentration ranging from 1 nM to 500 nM. The detection limits for COR and P4 were calculated to be 0.88 nM and 0.52 nM, respectively. Moreover, the proposed sensing platform demonstrated high selectivity, good reproducibility, and high stability. Finally, the sensor was successfully applied to the simultaneous determination of COR and P4 in a human female serum sample.

A portable signal-on self-powered aptasensor for ultrasensitive detection of sulfadimethoxine based on dual amplification of a capacitor and biphotoelectrodes.

A one-compartment photofuel cell with two photoelectrodes was combined with a capacitor to develop a portable self-powered sensor for sulfadimethoxine (SDM) detection. The developed sensor was applied to the assay of SDM in veterinary drug samples with desirable accuracy and precision.

Near-Infrared Light-Induced Self-Powered Aptasensing Platform for Aflatoxin B1 Based on Upconversion Nanoparticles-Doped Bi2S3 Nanorods.

A light source plays a pivotal role in a photofuel cell (PFC)-based self-powered biosensor. Although a visible light source has been extensively employed to drive a PFC, it still has some drawbacks for biosensing due to its relatively high energy. Herein we constructed a PFC-based aptasensor using near-infrared (NIR) light as the irradiation source. To achieve an efficient absorption of the NIR light, NaYF4:Yb,Er upconversion nanoparticles (UCNPs) that could convert low-energy incident light into high-energy radiation were combined with Bi2S3 nanorods (UCNPs/Bi2S3) to serve as the photoactive materials. The PFC was comprised of a UCNPs/Bi2S3 photoanode and a Pt cathode, which could generate electrical output under NIR light irradiation to provide the self-powered sensing signal without the supply from an external power source. The aflatoxin B1 (AFB1) binding aptamer was immobilized on the photoanode to serve as the recognition element. The detection of AFB1 was based on the competition between the interaction of aptamer with AFB1 analyte and the hybridization of aptamer with Au nanoparticles-labeled DNA sequence (AuNPs-cDNA). Under optimum conditions, the proposed aptasensor presented good sensitivity and high specificity for AFB1 detection in the concentration range from 0.01 to 100 ng·mL-1, with a detection limit of 7.9 pg·mL-1. Moreover, the developed sensor was applied to an assay of AFB1 in flour samples with a desirable accuracy and precision.

Simultaneous removal of organic pollutants and heavy metals in wastewater by photoelectrocatalysis: A review.

As a powerful technique by combining photocatalysis with electrochemistry, photoelectrocatalysis has been extensively explored to simultaneously remove mixed pollutants of organic and heavy metal in wastewater in the past decade. In the photoelectrocatalytic system, the bias potential can remarkably promote the oxidation of organic pollutants on the photoanode by suppressing the recombination of photogenerated electron-hole pairs and extending the lifetime of photogenerated holes. Meanwhile, some photogenerated electrons are driven by the bias potential to the cathode to reduce heavy metals. In this review, we summarize the research advances in photoelectrocatalytic treatment of organic-heavy metal mixed pollution systems under UV light, visible light and sunlight. We demonstrate the main operation variables affecting the photoelectrocatalytic removal processes of organic pollutants and heavy metals. The problems for utilization of solar energy in photoelectrocatalysis are discussed. Finally, this review proposes the perspectives for future development of photoelectrocatalysis to industrial applications.

A self-powered aptasensor using the capacitor-amplified signal of a photofuel cell and a portable digital multimeter readout.

A self-powered aptasensor for streptomycin detection was constructed with a photofuel cell combined with a capacitor and a digital multimeter. The sensitivity of the proposed sensor was 8.7 times of that without using a capacitor amplifier circuit.

Ratiometric Self-Powered Sensor for 17ß-Estradiol Detection Based on a Dual-Channel Photocatalytic Fuel Cell.

The photocatalytic fuel cell (PFC) provides an elegant approach for the construction of a light-induced self-powered sensing platform. Nevertheless, the quantification of a target with a single output signal in an ordinary PFC-based sensor is easily affected by variation of the light intensity and other environmental factors. Herein we propose a ratiometric self-powered aptasensor for highly selective detection of 17ß-estradiol (E2) based on a dual-channel PFC constructed with two photoanodes which could effectively avoid the fluctuation of the light intensity. Taking the advantage of the inhibited output performance of PFC by E2 which was captured by aptamer immobilized on the photoanodes, E2 was quantified via the ratio of output power density values from dual photoanodes. Under optimum conditions, the ratiometric self-powered sensing signal was linearly related to the logarithm of E2 concentration in the range of 1 to 500 nM, with a detection limit (3S/N) of 0.12 nM. Thus, a new type of self-powered aptasensor with high accuracy and specificity was successfully developed based on PFC in cooperation with a ratiometric assay and a spatial-resolution technique.

Synthesis of a CdS-decorated Eu-MOF nanocomposite for the construction of a self-powered photoelectrochemical aptasensor.

A composite of CdS nanoparticles and a europium metal organic framework (Eu-MOF) (CdS/Eu-MOF) was synthesized. The unique properties of MOFs help to improve the photoelectrochemical (PEC) properties of CdS by reducing charge carrier recombination and utilizing a broader spectrum for light harvesting. Under visible light illumination, the photocurrent of the CdS/Eu-MOF composite modified electrode was about 2.5-fold higher than that of the CdS modified electrode. When an ampicillin (AMP)-binding aptamer was immobilized on the CdS/Eu-MOF modified electrode as a recognition element, a self-powered PEC aptasensor exhibiting a specific photocurrent response to AMP was constructed. Several experimental conditions such as the ratio of CdS to MOF, the coating amount of the CdS/Eu-MOF suspension and the concentration of the aptamer were studied. Under optimum conditions, the photocurrent of the developed sensor was linearly related to the logarithm AMP concentration in the range of 1 × 10-10 to 2 × 10-7 M, with a detection limit (3S/N) of 9.3 × 10-11 M. Moreover, this sensor exhibited excellent selectivity, good repeatability and desirable stability. It was successfully applied to the detection of AMP in lake water and milk samples.

Recent advances in nanomaterial-based electrochemical and optical sensing platforms for microRNA assays.

MicroRNA (MiRNA) plays a crucial role in biological cells to enable assessment of a cancer's development stage. Increasing evidence has shown that the accurate and sensitive detection of miRNA holds the key toward correct disease diagnosis. However, some characteristics of miRNAs, such as their short chains, low concentration, and similar sequences, make it difficult to detect miRNA in biological samples. Nanomaterials usually have good optical, electronic, and mechanical properties and therefore provide new possibilities for improving the performance of miRNA assays. Many different sorts of nanomaterials, including metal nanomaterials, carbon nanomaterials, quantum dots, and transition-metal dichalcogenides, have been used to construct optical and electrochemical assays for miRNA and have shown attractive results. This review describes recent efforts in the application of nanomaterials as sensing elements in electrochemical and optical miRNA assays. The analytical figures of merit of various methods for the detection of miRNA are compared in the present article. The current capabilities, limitations, and future challenges in miRNA detection and analysis based on nanomaterials are also addressed.

Electrochemical biosensor based on Se-doped MWCNTs-graphene and Y-shaped DNA-aided target-triggered amplification strategy.

A highly sensitive electrochemical biosensor for detection of platelet-derived growth factor-BB (PDGF-BB) is developed by using Se-doped multi-walled carbon nanotubes (MWCNTs)-graphene hybrids as electrode supporting substrate, hemin/G-quadruplex as trace labels and Y-shaped DNA-aided target recycling as signal magnifier. The aptamer-containing hairpin probes were first immobilized on the electrode. When target PDGF-BB was added, the aptamer binded PDGF-BB to trigger catalytic assembly of two other hairpins to form many G-quadruplex Y-junction DNA structures, which released PDGF-BB to again bind the intact aptamer to initiate another assembly cycle. G-quadruplex/hemin complexes were produced when hemin was added to generate substantially amplified current output. The developed assay showed a linear range toward PDGF-BB from 0.1 pM to 10 nM with a detection limit of 27 fM (S/N = 3). The method showed excellent specificity and repeatability, and could be expediently applied for sensitive detection of other molecules by simply changing the aptamers.

Recent advances in signal amplification strategy based on oligonucleotide and nanomaterials for microRNA detection-a review.

MicroRNAs (MiRNAs) play multiple crucial regulating roles in cell which can regulate one third of protein-coding genes. MiRNAs participate in the developmental and physiological processes of human body, while their aberrant adjustment will be more likely to trigger diseases such as cancers, kidney disease, central nervous system diseases, cardiovascular diseases, diabetes, viral infections and so on. What's worse, for the detection of miRNAs, their small size, high sequence similarity, low abundance and difficult extraction from cells impose great challenges in the analysis. Hence, it's necessary to fabricate accurate and sensitive biosensing platform for miRNAs detection. Up to now, researchers have developed many signal-amplification strategies for miRNAs detection, including hybridization chain reaction, nuclease amplification, rolling circle amplification, catalyzed hairpin assembly amplification and nanomaterials based amplification. These methods are typical, feasible and frequently used. In this review, we retrospect recent advances in signal amplification strategies for detecting miRNAs and point out the pros and cons of them. Furthermore, further prospects and promising developments of the signal-amplification strategies for detecting miRNAs are proposed.

Tetrahedral DNA probe coupling with hybridization chain reaction for competitive thrombin aptasensor.

A novel competitive aptasensor for thrombin detection is developed by using a tetrahedral DNA (T-DNA) probe and hybridization chain reaction (HCR) signal amplification. Sulfur and nitrogen co-doped reduced graphene oxide (SN-rGO) is firstly prepared by a simple reflux method and used for supporting substrate of biosensor. Then, T-DNA probe is modified on the electrode by Au-S bond and a competition is happened between target thrombin and the complementary DNA (cDNA) of aptamer. The aptamer binding to thrombin forms an aptamer-target conjugate and make the cDNA remained, and subsequently hybridizes with the vertical domain of T-DNA. Finally, the cDNAs trigger HCR, which results in a great current response by the catalysis of horseradish peroxidase to the hydrogen peroxide + hydroquinone system. For thrombin detection, the proposed biosensor shows a wide linearity range of 10-13-10-8M and a low detection limit of 11.6fM (S/N = 3), which is hopeful to apply in biotechnology and clinical diagnosis.

An electrochemical microRNA sensing platform based on tungsten diselenide nanosheets and competitive RNA-RNA hybridization.

In this work, we report an ultrasensitive electrochemical biosensor for microRNA-21 (miRNA-21) detection by using a competitive RNA-RNA hybridization configuration. A biotinylated miRNA of the self-same sequence with the target miRNA is mixed with the samples, and allowed competition with the target miRNA for a thiolated RNA probe immobilized onto a tungsten diselenide (WSe2) nanosheet modified electrode. Thereafter the current response is obtained by forming the hybridized biotinylated miRNA with streptavidin-horseradish peroxidase (HRP) conjugates to catalyze the H2O2 + hydroquinone (HQ) system. Benefiting from the high specific surface area of WSe2 nanosheets, the competitive hybridization configuration and the signal amplification of the H2O2 + HQ detection system, the proposed assay exhibits a wide linear range of 0.0001-100 pM towards target miRNA with a detection limit of 0.06 fM (S/N = 3), and shows excellent discrimination ability for base-mismatched miRNA sequences. Therefore, the designed platform has promising prospects for the detection of miRNA in biomedical research and early clinical diagnosis.

Ultrasensitive electrochemical sensing platform based on graphene wrapping SnO2 nanocorals and autonomous cascade DNA duplication strategy.

In this work, a sensitive, universal and reusable electrochemical biosensor based on stannic oxide nanocorals-graphene hybrids (SnO2 NCs-Gr) is developed for target DNA detection by using two kinds of DNA enzymes for signal amplification through an autonomous cascade DNA duplication strategy. A hairpin probe is designed composing of a projecting part at the 3'-end as identification sequence for target, a recognition site for nicking endonuclease, and an 18-carbon shim to stop polymerization process. The designed DNA duplication-incision-replacement process is handled by KF polymerase and endonuclease, then combining with gold nanoparticles as signal carrier for further signal amplification. In the detection system, the electrochemical-chemical-chemical procedure, which uses ferrocene methanol, tris(2-carboxyethyl)phosphine and l-ascorbic acid 2-phosphate as oxidoreduction neurogen, deoxidizer and zymolyte, separately, is applied to amplify detection signal. Benefiting from the multiple signal amplification mechanism, the proposed sensor reveals a good linear connection between the peak current and logarithm of analyte concentration in range of 0.0001-1 × 10-11molL-1 with a detection limit of 1.25 × 10-17molL-1 (S/N=3). This assay also opens one promising strategy for ultrasensitive determination of other biological molecules for bioanalysis and biomedicine diagnostics.

Au nanoparticles/hollow molybdenum disulfide microcubes based biosensor for microRNA-21 detection coupled with duplex-specific nuclease and enzyme signal amplification.

An ultrasensitive electrochemical biosensor for detecting microRNAs is fabricated based on hollow molybdenum disulfide (MoS2) microcubes. Duplex-specific nuclease, enzyme and electrochemical-chemical-chemical redox cycling are used for signal amplification. Hollow MoS2 microcubes constructed by ultrathin nanosheets are synthesized by a facile template-assisted strategy and used as supporting substrate. For biosensor assembling, biotinylated ssDNA capture probes are first immobilized on Au nanoparticles (AuNPs)/MoS2 modified electrode in order to combine with streptavidin-conjugated alkaline phosphatase (SA-ALP). When capture probes hybridize with miRNAs, duplex-specific nuclease cleaves the formative duplexes. At the moment, the biotin group strips from the electrode surface and SA-ALP is incapacitated to attach onto electrode. Then, ascorbic acids induce the electrochemical-chemical-chemical redox cycling to produce electrochemical response in the presence of ferrocene methanol and tris (2-carboxyethyl) phosphine. Under optimum conditions, the proposed biosensor shows a good linear relationship between the current variation and logarithm of the microRNAs concentration ranging from 0.1fM to 0.1pM with a detection limit of 0.086fM (S/N=3). Furthermore, the biosensor is successfully applied to detect target miRNA-21 in human serum samples.

Ultrasensitive electrochemical sensing platform for microRNA based on tungsten oxide-graphene composites coupling with catalyzed hairpin assembly target recycling and enzyme signal amplification.

An ultrasensitive electrochemical biosensor for microRNA (miRNA) is developed based on tungsten oxide-graphene composites coupling with catalyzed hairpin assembly target recycling and enzyme signal amplification. WO3-Gr is prepared by a simple hydrothermal method and then coupled with gold nanoparticles to act as a sensing platform. The thiol-terminated capture probe H1 is immobilized on electrode through Au-S interaction. In the presence of target miRNA, H1 opens its hairpin structure by hybridization with target miRNA. This hybridization can be displaced from the structure by another stable biotinylated hairpin DNA (H2), and target miRNA is released back to the sample solution for next cycle. Thus, a large amount of H1-H2 duplex is produced after the cyclic process. At this point, a lot of signal indicators streptavidin-conjugated alkaline phosphatase (SA-ALP) are immobilized on the electrode by the specific binding of avidin-biotin. Then, thousands of ascorbic acid, which is the enzymatic product of ALP, induces the electrochemical-chemical-chemical redox cycling to produce a strongly electrochemical response in the presence of ferrocene methanol and tris (2-carboxyethyl) phosphine. Under the optimal experimental conditions, the established biosensor can detect target miRNA down to 0.05fM (S/N=3) with a linear range from 0.1fM to 100pM, and discriminate target miRNA from mismatched miRNA with a high selectivity.

Surfactant enhanced pyrene degradation in the rhizosphere of tall fescue (Festuca arundinacea).

The present study was conducted to evaluate the effect of two non ionic surfactants (Tween 80 and Triton X-100), a biosurfactant (Lecithin), and randomly methylated-ß-cyclodextrins (RAMEB) on the remediation of pyrene from soil planted with tall fescue (Festuca arundinacea). Soils with pyrene concentration of about 243 mg kg(-1) was grown with tall fescue and were individually amended with 0, 200, 600, 1000, and 1500 mg kg(-1) of Tween 80, Triton X-100, biosurfactant, and RAMEB. The results show that all surfactants significantly increased plant biomass compared to unamended soil. Dehydrogenase activity was also stimulated as a result of surfactant addition. Only 3.9 and 3.2 % of pyrene was decreased in the uncovered and covered abiotic sterile control, suggesting that microbial degradation was the main removal mechanism of pyrene from soil. In the planted treatment receiving no surfactant, the remediation of pyrene was 45 % which is significantly higher than that of corresponding unplanted control soil, suggesting that the cultivation of tall fescue alone could enhance the overall remediation of pyrene in soil. All surfactants had significantly higher rates of pyrene remediation compared to the unamended planted soil. Generally, RAMEB displayed the highest remediation rates, i.e., 64.4-79.1 % followed by the Triton X-100, i.e., 60.1-74.8 %. The positive impact of surfactants on pyrene remediation could possibly be because of their capacities to increase its bioavailability in soil. The evidence from this study suggests that the addition of surfactants could enhance phytoremediation of PAHs polluted soil.

A layered tungsten disulfide/acetylene black composite based DNA biosensing platform coupled with hybridization chain reaction for signal amplification.

A 2-dimensional tungsten disulfide-acetylene black (WS2-AB) composite is synthesized by a simple hydrothermal method to achieve excellent electrochemical properties for applications as a DNA biosensor. The biosensor is fabricated based on the Au nanoparticles (AuNPs) and WS2-AB composite modified electrode, which subsequently is used to couple with a capture probe by an Au-S bond, then modified with target DNA, auxiliary DNA and bio-H1-bio-H2 (H1-H2) to perform hybridization chain reaction for signal amplification. Herein, two DNA hairpins H1 and H2 are opened by the recognition probe. The nicked double helices from hybridization chain reaction are used to immobilize horseradish peroxidase enzymes via biotin-avidin reaction, which produces signal-amplification detection of target DNA through the catalytic reaction of the hydrogenperoxide + hydroquinone system. Under optimum conditions, the as-prepared biosensor shows a good linear relationship between the current value and logarithm of the target DNA concentration ranging from 0.001 pM to 100 pM and a detection limit as low as 0.12 fM. Moreover, the fabricated biosensor exhibits good selectivity to differentiate the one-base mismatched DNA sequence. This work will open a pathway for ultrasensitive detection of other biorecognition events and gene-related diseases based on layered WS2-AB and hybridization chain reaction.

Natural organic matter-induced alleviation of the phytotoxicity to rice (Oryza sativa L.) caused by copper oxide nanoparticles.

Natural organic matter (NOM) can interact with engineered nanoparticles (NPs) in the environment and modify their behavior and toxicity to organisms. In the present study, the phytotoxicity of copper oxide (CuO) NPs to rice seedlings in the presence of humic acid as a model NOM was investigated. The results showed that CuO NPs induced the inhibition of root elongation, aberrations in root morphology and ultrastructure, and losses of cell viability and membrane integrity. The adverse effects partly resulted from the generation of reactive oxygen species caused by CuO NPs, which led to lipid peroxidation, mitochondrial dysfunction, and programmed cell death in rice seedlings. However, all the phytotoxicity was alleviated with the addition of humic acid because humic acid coatings on nanoparticle surfaces enhanced electrostatic and steric repulsion between the CuO NPs and the plant cell wall/membrane, reducing contact between NPs and plant and CuO NP-induced oxidative damage to plant cells. The present study's results shed light on the mechanism underlying NP phytotoxicity and highlight the influence of NOM on the bioavailability and toxicity of NPs.