Radiological risk and impact on soil microbial diversity of radionuclides in agricultural topsoils downstream of a decommissioned hydrometallurgical uranium plant.

Containing only low levels of U-bearing minerals, U ores often have to undergo hydrometallurgical processing for the separation of other minerals. Hydrometallurgical operations, even after being shut down, could pose radiological risk to the ecosystem and human health due to the radionuclide contamination of surrounding environmental media. This study investigated the contamination of radionuclides in the agricultural topsoils downstream of a decommissioned hydrometallurgical U plant in southern China, and assessed the corresponding radiological risk and evaluated its impact on soil microbial communities. The values of geoaccumulation index and potential ecological risk index indicate that all soil samples were significantly contaminated with U and 226Ra, with their concentrations being 4.4-28.7 times and 4.4-114.8 times higher than the corresponding regional background values, respectively. The mean outdoor annual effective dose (OAED) in the sampling plot next to the drainage ditch downstream of the decommissioned plant was up to 3.9 and 8.2 times higher than the Chinese annual effective dose limit and global average, respectively, which is indicative of unacceptable radiological risk for the local farm workers. Soil microbial composition was obviously impacted by the soil physicochemical properties and radionuclides. Specifically, Cladophialophora, which belongs to the fungal genus, exhibited significantly positive correlations with the contents of total Cd, total U, organic U, residual U, and total K, while Methanosarcina, which belongs to the archaeal genus, exhibited significantly positive correlations with the contents of 226Ra and residual U. Soil pH and total N content were significantly correlated with the abundance of several bacterial genera and the dominant archaeal genus (i.e., Candidatus Nitrocosmicus). These findings demonstrate the existence of potentially significant radiological risk associated with the radionuclides released from historical hydrometallurgical processing of U ores to the surrounding environment, and the need for proper site management and remediation.

Overcoming China's animal waste disposal challenge brought by elevated levels of veterinary antimicrobial residues and antimicrobial resistance.

Direct application of animal waste on farmlands was banned in China recently, rendering organic fertilizer production a sound solution for disposing of animal manures and recycling their materials and nutrients. Due to the overuse of antimicrobials in livestock and poultry farms, manure-based organic fertilizers often contain elevated residues of antimicrobials and abundant antimicrobial resistance genes. Land application of such products has caused significant concerns on the environmental pollution of antimicrobials, and the transmission and development of antimicrobial resistance (AMR), which is a major global health challenge. China's recent attempt to restrict the contents of antimicrobial residues in organic fertilizers encountered strong resistance from the industry as it would hinder the utilization of animal manures as a raw material. Reducing and even eliminating the use of antimicrobials in animal farms is the ultimate solution to the challenge of manure disposal posed by the elevated levels of antimicrobial residues and AMR. Phasing out the non-therapeutic use of antimicrobials, developing substitutes of antimicrobials, enhancing animal welfare in farms, promoting diversification of animal farms, and developing antimicrobial removal and disinfection technologies for animal waste are recommended to improve the veterinary antimicrobial stewardship and manure management in China's animal agriculture. These concerted measures would enhance the sustainability of crop and animal farming systems in China and mitigate the impact of antimicrobials and AMR to agro-environmental quality and human health.

Existence and fate of microplastics in terrestrial environment: A global fretfulness and abatement strategies.

Widespread use of plastics in consumer products, packaging, cosmetics, and industrial and agricultural production has resulted in the ubiquitous occurrence of microplastics in terrestrial environment. Compared to the marine environment, only limited studies have investigated the microplastics pollution and associated risk in terrestrial environment. The present review summarizes the global distribution of microplastics in terrestrial environment, their transport pathways and fate, risk to ecosystem and human health, and abatement strategies. Small particle sizes (<500 µm); fragment, fiber, and film shapes; transparent and white color; polyethylene (PE), polypropylene (PP), and polyethylene terephthalate (PET) polymers were the major characteristics of the microplastics found in terrestrial environment. Microplastics in soils negatively affect soil organisms, while the impact of microplastics in terrestrial environment on human health is poorly understood, which needs to be explored further as there is clear evidence on their presence in human bodies. The removal of microplastics from soil environment is quite complex and costly, thus prevention of their releases is preferable. Among the existing abatement options, biodegradation, which harnesses bacterial strains to degrade microplastics through enzymatic hydrolysis, hold promise for terrestrial environment. Strengthening global cooperation, implementing timely policies on plastic use and recycle, and developing new technologies for control of microplastics are recommended to reduce the pollution in terrestrial environment. Global effort on reducing plastic wastes and enhancing their management is imperative, while substitution with biodegradable plastics could help minimize future accumulation of microplastics in terrestrial environment.

Mitigating black carbon emissions: key drivers in residential usage and coke/brick production.

Black carbon (BC) is a crucial air pollutant that contributes to short-lived climate forcing and adverse health impacts. BC emissions have rapidly declined over the past three decades and it is important to uncover the major factors behind this decline. Herein, the temporal trends in BC emissions were compiled from 146 detailed sources from 1960 to 2019. Results revealed that the major emission sources were residential solid fuel usage, coke production and brick production. Furthermore, 96.9% of the emission reduction from 3.03 Tg in 1995 to 1.02 Tg in 2019 was attributed to these three sources. It was determined that the transition in residential energy/stove usage, phasing-out of beehive coke ovens and brick kiln upgrading were the most important drivers leading to this reduction and will continue to play a key role in future emission mitigation. In addition, this study identified the need to address emissions from coal used in vegetable greenhouses and the commercial sector, and diesel consumption in on/off-road vehicles.

Insights into the Photochemical Mechanism of Goethite: Roles of Different Types of Surface Hydroxyl Groups in Reactive Oxygen Species Generation and Fe(III) Reduction.

The surface photochemical activity of goethite, which occurs widely in surface soils and sediments, plays a crucial role in the environmental transformation of various pollutants and natural organic matter. This study systemically investigated the mechanism of different types of surface hydroxyl groups on goethite in generating reactive oxygen species (ROSs) and Fe(III) reduction under sunlight irradiation. Surface hydroxyl groups were found to induce photoreductive dissolution of Fe(III) at the goethite-water interface to produce Fe2+(aq), while promoting the production of ROSs. Substitution of the surface hydroxyl groups on goethite by fluoride significantly inhibited the photochemical activity of goethite, demonstrating their important role in photochemical activation of goethite. The results showed that the surface hydroxyl groups (especially the terminating hydroxyl groups, ≡FeOH) led to the formation of Fe(III)-hydroxyl complexes via ligand-metal charge transfer on the goethite surface upon photoexcitation, facilitating the production of Fe2+(aq) and •OH. The bridging hydroxyl groups (≡Fe2OH) were shown to mainly catalyze the production of H2O2, leading to the subsequent light-driven Fenton reaction to produce •OH. These findings provide important insights into the activation of molecular oxygen on the goethite surface driven by sunlight in the environment, and the corresponding degradation of anthropogenic and natural organic compounds caused by the generated ROSs.

Role of primary drivers leading to emission reduction of major air pollutants and CO2 from global power plants.

Electricity production is a significant source of air pollution. Various factors, including electricity demand, generation efficiency, energy mix, and end-of-pipe control measures, are responsible for the emission changes during electricity generation. Although electricity production more than doubled from 1990 to 2017, air pollutant emissions showed a moderate increase or decrease, which was attributed to mitigating drivers such as increased clean energy use, improved power generation efficiency, and widespread installation of end-of-pipe control facilities. The absence of these mitigating drivers would have increased CO2, fine particulate matter (PM2.5), black carbon, SO2, and NOx emissions in 2017 by 165 %, 403 %, 1070 %, 614 %, and 274 % than their actual levels, respectively. The improved electricity generation efficiency reduced potential CO2, PM2.5, SO2, and NOx emissions by 30 %, 295 %, 119 %, and 52 % compared to actual emissions, respectively. Meanwhile, the installation of end-of-pipe facilities reduced potential SO2 and PM2.5 emissions by 34.7 and 4.0 Tg, respectively. Considerable differences in emissions among countries were found to be attributable to their differences in electricity demand and the implementation of local mitigating polices.

Solar Photodegradation of a Novel des-F(6)-Fluoroquinolone, Garenoxacin, and Ecotoxicity of Its Phototransformation Products.

Garenoxacin (GRNX) is a novel des-F(6)-fluoroquinolone on the horizon; thus, its fate and risk in the aquatic environment deserve attention. This study systematically investigated, for the first time, the phototransformation of GRNX under simulated and natural sunlight and assessed the ecotoxicity of its photodegradation products. Phototransformation of GRNX was observed to depend strongly on its ionization state, with direct photolysis and self-sensitized photolysis having comparable contributions for the cationic and zwitterionic species, while the latter dominated for the anionic species. Singlet oxygen generated via the self-sensitized photolysis of GRNX was the major reactive oxygen species in its photodegradation. Phototransformation of GRNX in different ionization states followed distinct pathways, with defluorination of the difluoromethyl group occurring only for the zwitterionic and anionic species. GRNX photodegradation in natural water could be described by a simple kinetic model based on the measured steady-state concentrations of 1O2 and ·OH. Toxicity tests with Vibrio fischeri and Chlorella vulgaris consistently indicate that the generation of hydroxylation and decarboxylation products during photodegradation of GRNX increased the acute toxicity. These findings not only provide insights into the fate of GRNX in sunlit surface water but also reveal the potentially significant risk of its photodegradation products to the aquatic ecosystem.

A facile electrochemical aptasensor for chloramphenicol detection based on synergistically photosensitization enhanced by SYBR Green I and MoS2.

This study reports the development of a photocatalytic electrochemical aptasensor for the purpose of detecting chloramphenicol (CAP) antibiotic residues in water by utilizing SYBR Green I (SG) and chemically exfoliated MoS2 (ce-MoS2) as synergistically signal-amplification platforms. The Au nanoparticles (AuNPs) were electrodeposited onto the surface of an indium tin oxide (ITO) electrode. After that, the thiolate-modified cDNA, also known as capture DNA, was combined with the aptamer. Subsequently, photosensitized SG molecules and ce-MoS2 nanomaterial were inserted into the groove of the resultant double-stranded DNA (dsDNA). The activation of the photocatalytic process upon exposure to light resulted in the generation of singlet oxygen. The singlet oxygen effectively split the dsDNA, resulting in significant enhancement in the current of [Fe(CN)6]3-/4-. When the CAP was present, both SG molecules and ce-MoS2 broke away from the dsDNA, which turned off the photosensitization response, leading to significant reduction in the current of [Fe(CN)6]3-/4-. Under the optimal conditions, the aptasensor exhibited a linear relationship between the current of [Fe(CN)6]3-/4- with logarithmic concentrations of CAP from 20 to 1000 nM, with a detection of limit (3σ) of 3.391 nM. The aptasensor also demonstrated good selectivity towards CAP in the presence of interfering antibiotics, such as tetracycline, streptomycin, levofloxacin, ciprofloxacin, and sulfadimethoxine. Additionally, the results obtained from the analysis of natural water samples using the proposed aptasensor were consistent with the findings acquired through the use of a liquid chromatograph-mass spectrometer. Therefore, with its simplicity and high selectivity, this aptasensor can potentially detect alternative antibiotics in environmental water samples by replacing the aptamers based on photosensitization.

Sources, bioaccessibility and health risk of heavy metal(loid)s in the particulate matter of urban areas.

Exposure to heavy metal(loid)s in airborne particulate matter (PM) could lead to various adverse health effects. The study investigated the total contents and the bioaccessibility of PM-bound heavy metal(loid)s (Cr, Mn, Co, Ni, Cu, Zn, As, Cd, and Pb), identified their potential sources, and evaluated the associated health risk via inhalation in eight typical cities in China (Nanjing, Mianyang, Huangshi, Nanchang, Kunming, Xiamen, Guangzhou, and Wuzhishan). The results showed that PM-bound Cr (VI) and As of all eight cities exceeded the limits of World Health Organization. The bioaccessibility of PM-bound heavy metal(loid)s exhibited large variations, with their means following the order of Cd > Mn > Co > Ni > Cu > Cr > As > Zn > Pb. Traffic and industrial emissions were identified as primary sources in most urban areas. The emission sources have important effects on the bioaccessibility of PM-bound heavy metal(loid)s. In particular, atmospheric Cu has its bioaccessibility significantly correlated with the contributions from traffic emissions. The bioaccessibility-based health risk assessment obtained different results from those using total contents, showing that the non-carcinogenic risks posed by most metal(loid)s were acceptable except for As in Huangshi and Nanchang. These findings highlight the source dependence of bioaccessibility of heavy metal(loid)s in airborne PM, facilitate the identification of priority pollution sources and enhance effective risk-oriented source regulatory strategies in urban areas.

Insights into sunlight-driven transformation of tetracycline by iron (hydr)oxides: The dominating role of self-generated hydrogen peroxide.

Iron (hydr)oxides are abundant in surface environment, and actively participate in the transformation of organic pollutants due to their large specific surface areas and redox activity. This work investigated the transformation of tetracycline (TC) in the presence of three common iron (hydr)oxides, hematite (Hem), goethite (Goe), and ferrihydrite (Fh), under simulated sunlight irradiation. These iron (hydr)oxides exhibited photoactivity and facilitated the transformation of TC with the initial phototransformation rates decreasing in the order of: Hem > Fh > Goe. The linear correlation between TC removal efficiency and the yield of HO• suggests that HO• dominated TC transformation. The HO• was produced by UV-induced decomposition of self-generated H2O2 and surface Fe2+-triggered photo-Fenton reaction. The experimental results indicate that the generation of HO• was controlled by H2O2, while surface Fe2+ was in excess. Sunlight-driven H2O2 production in the presence of the highly crystalline Hem and Goe occurred through a one-step two-electron reduction pathway, while the process was contributed by both O2-induced Fe2+ oxidation and direct reduction of O2 by electrons on the conduction band in the presence of the poorly crystalline Fh. These findings demonstrate that sunlight may significantly accelerate the degradation of organic pollutants in the presence of iron (hydr)oxides.

Health risk assessment from inhalation exposure to indoor formaldehyde: A systematic review and meta-analysis.

This systematic review and meta-analysis investigated studies on formaldehyde (FA) inhalation exposure in indoor environments and related carcinogenic (CR) and non-carcinogenic (HQ) risk. Studies were obtained from Scopus, PubMed, Web of Science, Medline, and Embase databases without time limitation until November 21, 2023. Studies not meeting the criteria of Population, Exposure, Comparator, and Outcomes (PECO) were excluded. The 45 articles included belonged to the 5 types of sites: dwelling environments, educational centers, kindergartens, vehicle cabins, and other indoor environments. A meta-analysis determined the average effect size (ES) between indoor FA concentrations, CR, and HQ values in each type of indoor environment. FA concentrations ranged from 0.01 to 1620 µg/m3. The highest FA concentrations were stated in water pipe cafés and the lowest in residential environments. In more than 90% of the studies uncertain (1.00 ×10-6 1.00 ×10-4) due to FA inhalation exposure was reported and non-carcinogenic risk was stated acceptable. The meta-analysis revealed the highest CR values due to inhalation of indoor FA in high-income countries. As 90% of the time is spent indoors, it is crucial to adopt effective strategies to reduce FA concentrations, especially in kindergartens and schools, with regular monitoring of indoor air quality.

Environmental performance of unfired bricks produced from co-disposal of mine tailings and municipal solid waste incineration fly ash based on comprehensive leaching tests.

The potential leaching of heavy metals is a crucial concern for construction materials produced from solidification/stabilization (S/S) treatment of wastes. This study comprehensively evaluated the leaching characteristics of heavy metals from the unfired bricks produced from co-disposal of Pb-Zn mine tailings and municipal solid waste incineration fly ash using batch, sequential, and semi-dynamic leaching tests. The results show that S/S treatment drastically reduced the leachability of heavy metals from the unfired bricks through lowering their distribution in the acid-soluble fraction. The effective diffusion coefficients of heavy metals within unfired bricks were all below 1.55 × 10-13 cm2/s, which is indicative of low mobility in the environment. The release of heavy metals from the unfired bricks was primarily governed by diffusion and dissolution. Slaking treatment of fly ash significantly reduced the leaching of heavy metals from the unfired bricks due to their improved structural integrity and compactness, which minimizes the surface area in the solid matrix accessible by the leaching medium. The leachability indices of heavy metals within the unfired bricks ranged from 13.12 to 18.10, suggesting that they are suitable for "controlled utilization" in specific scenarios. Compared to untreated mine tailings, converting them into unfired bricks could reduce the releases of heavy metals by several to hundreds of folds. These findings demonstrate that S/S can be an effective and sustainable strategy for co-disposal of mining tailings and incineration fly ash to produce construction materials with sound long-term environmental performance.

Influences of shallow groundwater depth on N2O diffusion along the soil profile of summer maize fields in North China Plain.

The emissions of nitrous oxide (N2O) from agricultural fields are a significant contribution to global warming. Understanding the mechanisms of N2O emissions from agricultural fields is essential for the development of N2O emission mitigation strategies. Currently, there are extensive studies on N2O emissions on the surface of agricultural soils, while studies on N2O fluxes at the interface between the saturated and unsaturated zones (ISU) are limited. Uncertainties exist regarding N2O emissions from the soil-shallow groundwater systems in agricultural fields. In this study, a three-year lysimeter experiment (2019-2020, 2022) was conducted to simulate the soil-shallow groundwater systems under four controlled shallow groundwater depth (SGD) (i.e., SGD = 40, 70, 110, and 150 cm) conditions in North China Plain (NCP). Weekly continuous monitoring of N2O emissions from soil surface, N2O concentration in the shallow groundwater and the upper 10 cm of pores at the ISU, and nitrogen cycling-related parameters in the soil and groundwater was conducted. The results showed that soil surface N2O emissions increased with decreased shallow groundwater depth, and the highest emissions of 96.44 kg ha-1 and 104.32 kg ha-1 were observed at G2 (SGD = 40 cm) in 2020 and 2022. During the observation period of one maize growing season, shallow groundwater acted as a sink for the unsaturated zone when the groundwater depth was 40 cm, 70 cm, and 110 cm. However, when SGD was 150 cm, shallow groundwater became a source for the unsaturated zone. After fertilization, the groundwater in all treatment plots behaved as a sink for the unsaturated zone, and the diffusion intensity decreased with increasing SGD. The results would provide a theoretical basis for cropland water management to reduce N2O emissions.

Endocrine disrupting effects of parabens in zebrafish (Danio rerio): New insights from transcriptomics, metabolomics, and molecular dynamics simulation.

Parabens (PBs), a group of widely used synthetic preservatives with potential endocrine disrupting activity, have been detected with increasing frequency in organisms and environmental matrices. This study assessed the hormone interference effects of four typical PBs, namely methylparaben (MeP), ethylparaben (EtP), propylparaben (PrP), and butylparaben (BuP), in zebrafish and elucidated the probable underlying mechanisms. Transcriptomic and metabolomic analyses showed that the differentially expressed genes and metabolites were associated with the tyrosine metabolism, arachidonate metabolism, and glycerophospholipid metabolism, indicating they were essential precursors of steroid hormone biosynthesis and metabolism. Histopathological analysis revealed impaired gonad development in the zebrafish exposed to PBs, as evidenced by the significantly increased vitellogenin (VTG) and estradiol (E2) levels. Furthermore, molecular dynamics simulation suggested that the four PBs could preferentially activate the zebrafish estrogen receptor, zfERß2, to regulate the downstream pathways. Disruption of the amino acid metabolism and lipid metabolism, and activation of zfERß2 signaling pathway were found to be the key mechanisms for the endocrine disrupting effects of PBs. The hormone interference effects of PBs were apparently dependent on the shared oxybenzene on their structures, with the degree of interference determined largely by the length of their alkyl chains. These findings provide new insights into the endocrine disrupting effects of PBs and could help better assess their risk to human health.

Non-negligible N2O emission hotspots: Rivers impacted by ion-adsorption rare earth mining.

Rare earth mining causes severe riverine nitrogen pollution, but its effect on nitrous oxide (N2O) emissions and the associated nitrogen transformation processes remain unclear. Here, we characterized N2O fluxes from China's largest ion-adsorption rare earth mining watershed and elucidated the mechanisms that drove N2O production and consumption using advanced isotope mapping and molecular biology techniques. Compared to the undisturbed river, the mining-affected river exhibited higher N2O fluxes (7.96 ± 10.18 mmol m-2d-1 vs. 2.88 ± 8.27 mmol m-2d-1, P = 0.002), confirming that mining-affected rivers are N2O emission hotspots. Flux variations scaled with high nitrogen supply (resulting from mining activities), and were mainly attributed to changes in water chemistry (i.e., pH, and metal concentrations), sediment property (i.e., particle size), and hydrogeomorphic factors (e.g., river order and slope). Coupled nitrification-denitrification and N2O reduction were the dominant processes controlling the N2O dynamics. Of these, the contribution of incomplete denitrification to N2O production was greater than that of nitrification, especially in the heavily mining-affected reaches. Co-occurrence network analysis identified Thiomonas and Rhodanobacter as the key genus closely associated with N2O production, suggesting their potential roles for denitrification. This is the first study to elucidate N2O emission and influential mechanisms in mining-affected rivers using combined isotopic and molecular techniques. The discovery of this study enhances our understanding of the distinctive processes driving N2O production and consumption in highly anthropogenically disturbed aquatic systems, and also provides the foundation for accurate assessment of N2O emissions from mining-affected rivers on regional and global scales.

The leaching behavior of heavy metal from contaminated mining soil: The effect of rainfall conditions and the impact on surrounding agricultural lands.

Contaminated mining soils could lead to heavy metal pollution of surrounding farmlands under rainfall conditions. With the aids of sequential extraction, batch leaching, and dynamic leaching experiments, this study was carried out to investigate the characteristics of heavy metals in contaminated mining soils, understand their leaching behavior under different rainfall conditions, and evaluate the potential effects on surrounding farmlands. The results indicated that the concentrations of heavy metals (Cr, Ni, Cu, Zn, As, Cd, and Pb) in the contaminated mining soils were several or even twenty times higher than their corresponding background values, and Cd, Zn, Cu and Pb had considerable proportions (>50 %) in mobile forms. The leaching amounts of heavy metals from the contaminated mining soils had positive correlation with their contents in acid soluble form, and showed strong dependence on rainfall pH conditions. Acid rainfalls (pH = 4.32) can greatly increase the average annual release of Cd, Zn, Cu and Pb from mine soils in the study area, with increments ranging from 72.4 % (Pb) to 85.9 % (Cd) compared to those under alkaline conditions (pH = 7.42). The leaching of heavy metals was well fitted by two-constant, pseudo second-order and parabolic equations, indicating that their multi-layer sorption/desorption behavior on soil surface was dominated by chemical processes and their release was controlled by the diffusion within the soil pore channels. The two-column leaching experiment showed that the metal-rich leachate can lead to obvious increments of heavy metals in non-residual fractions (in particular Cd in acid soluble form) in surrounding farmlands, which would significantly raise the potential ecological risk associated with heavy metals. These findings indicate the importance of contaminated mining soils as a long-term source of heavy metals and the needs for mitigating the releases of toxic elements, especially in areas with heavy acid precipitation.

Potential risk, leaching behavior and mechanism of heavy metals from mine tailings under acid rain.

The leaching of heavy metals from abandoned mine tailings can pose a severe threat to surrounding areas, especially in the regions influenced by acid rain with high frequency. In this study, the potential risks of heavy metals in the tailings collected from a small-scale abandoned multi-metal mine was assessed, and their leaching behavior and mechanism were investigated by batch, semi-dynamic and in situ leaching experiments under simulated and natural rainfall conditions. The results suggested that Zn, Cu, Pb, and Cd in the tailings could cause high/very high risks. Both batch and semi-dynamic leaching tests consistently confirmed that the leaching of heavy metals (particularly Cd) could lead to serious pollution of the surrounding environment. The leaching rates of heavy metals were pH-dependent and related to their chemical speciations in the mine tailings. The leaching behavior of Cu and Cd was dominated by surface wash-off, Zn was controlled by diffusion initially and then surface wash-off, and the leaching mechanisms of Pb and As varied with the pH conditions. It was estimated that acid rain could greatly elevate the release fluxes of Zn (20.8%), Cu (36.7%), Pb (49.9%) and Cd (35.3%) in the study area. These findings could improve the understanding of the leaching behavior of heavy metals from mine tailings and assist in developing appropriate management strategies.

Characterization of atmospheric mercury from mercury-added product manufacturing using passive air samplers.

Although alternatives to mercury (Hg) are available in most products and industrial activities, Hg continues to be an ingredient in some products, including fluorescent lamps and electrical and electronic equipment (EEE). In this work, low-cost passive air samplers (PASs) were used to investigate the atmospheric Hg pollution in Zhongshan, a large industrial city and major hub of mercury-added product manufacturing in South China. The GEM concentrations in the atmosphere were measured for two weeks during the summer of 2019 at a total of 144 sites across Zhongshan. Comparison with the results of active sampling confirmed that the PASs yielded accurate and reliable gaseous elemental mercury (GEM) concentrations and were thus well-suited for multi-site field monitoring. The mean GEM concentrations in the areas with mercury-added product manufacturing activities (5.1 ± 0.4 ng m-3) were significantly higher than those in other parts of Zhongshan (1.5 ± 0.4 ng m-3), indicating that local releases, rather than regional transport, were responsible for the atmospheric Hg pollution. Elevated GEM concentrations (up to 11.4 ng m-3) were found in the vicinity of fluorescent lamp and EEE factories and workshops, indicating significant Hg vapor emissions, presumably from the outdated production technologies and non-standard operation by under-trained workers. The Hg emissions from mercury-added product manufacturing were estimated to be 0.06 and 7.8 t yr-1 for Zhongshan and China, respectively, based on the scales of fluorescent lamp and EEE production. The non-carcinogenic health risk of Zhongshan residents from inhalation and ingestion was judged acceptable, whereby the inhalation exposure in Hg-polluted areas exceeded that of dietary ingestion. These findings demonstrate that mercury-added product manufacturing still contributes notably to anthropogenic gaseous Hg releases in the industrial areas with intense mercury-added product manufacturing activities.

Household energy stacking and structures in Pakistan - Results from a multiple-energy study in Azad Kashmir and Punjab.

Solid fuel use (SFU) is common in most developing countries and would release many hazardous air pollutants posing high risks on human health. The Global Burden of Disease (GBD) study highlighted risks associated with household SFU in Pakistan, however, high uncertainties prevail because of scanty data on SFU and unaccounted energy stacking. This study conducted a field campaign aiming at collecting first-hand data on household energy mix in Pakistan. The first survey was in Punjab and Azad Kashmir, and revealed that stacked energy use was pervasive, especially for cooking. The stacking was found to be much more obvious in SFU households (defined as those using SFU dominantly) compared to those non-SFU. There were significantly substantial differences between Azad Kashmir and Punjab because of distinct resources available and economic conditions. Woody materials comprised up to nearly 70% in Azad Kashmir, but in Punjab, gas was frequently used for cooking. Only investigating primary household energy would probably overestimate main energy types that being used for a longer time but underestimated other supplements, suggesting the preference of multiple-energy surveys in household energy studies.

Insights on the assembly processes and drivers of soil microbial communities in different depth layers in an abandoned polymetallic mining district.

Soil microbes, which play crucial roles in maintaining soil functions and restoring degraded lands, are impacted by heavy metal pollution. This study investigated the vertical distribution of bacterial communities along the soil profiles across four types of areas (heavy metal pollution level: tailings heap area > phytoremediation area > natural restoration area > original forest area) in an abandoned polymetallic mining district by 16S rRNA sequencing, and aimed to disentangle the assembly mechanisms and key drivers of the vertical variation in bacterial community structure. Bacterial diversity and composition were found to vary remarkably between the depth layers in all types of areas, with heterogeneous selection dominated the vertical distribution pattern of soil bacterial communities. Pearson correlation analysis and partial Mantel test revealed that soil nutrients mainly shaped the vertical distribution of bacterial microbiota along soil profiles in the original forest and natural restoration areas. Ni, As, and bioavailable As were the key drivers regulating the vertical variation of bacterial assemblages in the phytoremediation area, whereas Pb, pH, soil organic carbon, and available nitrogen were crucial drivers in the tailings heap area. These findings reveal the predominant assembly mechanisms and drivers governing the vertical distribution of soil bacterial microbiota and indicate the efficiency of phytoremediation and ecological restoration on ameliorating edaphic micro-ecosystems in heavy metal-contaminated areas.