Impact of traumatic brain injury on risk for schizophrenia and bipolar disorder.

The impact of traumatic brain injury (TBI) on subsequent risk of schizophrenia (SCZ) or bipolar disorder (BD) remains contested. Possible genetic and environmental confounding effects have also been understudied. Therefore, we aim to investigate the impact of TBI on the risk of SCZ and BD and whether the effect varies by injury severity, age at injury, and sex. We identified 4,184 SCZ and 18,681 BD cases born between 1973 and 1998 in the Swedish National Registers. Case-control samples matched (1:5) on birth year, sex, and birthplace were created along with a family design study, with cases matched to non-case full siblings. TBI was associated with higher risk of SCZ and BD (IRR=1.33 for SCZ, IRR=1.78 for BD). The association remained significant in the sibling comparison study. Moderate or severe TBI was associated with higher risk for both SCZ and BD compared to mild TBI. Older age at injury was associated with higher risk of SCZ and BD, and the effect of TBI was stronger in women than men. Findings indicate that TBI is a risk factor for both SCZ and BD with differential impact by age, severity and sex and that this association cannot be explained by familial confounding alone.

Climate sensitivity and relative humidity changes in global storm-resolving model simulations of climate change.

The climate simulation frontier of a global storm-resolving model (GSRM; or k-scale model because of its kilometer-scale horizontal resolution) is deployed for climate change simulations. The climate sensitivity, effective radiative forcing, and relative humidity changes are assessed in multiyear atmospheric GSRM simulations with perturbed sea-surface temperatures and/or carbon dioxide concentrations. Our comparisons to conventional climate model results can build confidence in the existing climate models or highlight important areas for additional research. This GSRM's climate sensitivity is within the range of conventional climate models, although on the lower end as the result of neutral, rather than amplifying, shortwave feedbacks. Its radiative forcing from carbon dioxide is higher than conventional climate models, and this arises from a bias in climatological clouds and an explicitly simulated high-cloud adjustment. Last, the pattern and magnitude of relative humidity changes, simulated with greater fidelity via explicitly resolving convection, are notably similar to conventional climate models.

Investigation of cell-accelerated corrosion (CAC) on the CoCrMo alloy with segregation banding: Hip implant applications.

Metal alloy microstructure plays a crucial role in corrosion associated with total hip replacement (THR). THR is a prominent strategy that uses metal implants such as cobalt-chromium-molybdenum (CoCrMo) alloys due to their advantageous biological and mechanical properties. Despite all benefits, these implants undergo corrosion and wear processes in-vivo in a synergistic manner called tribocorrosion. Also, the implant retrieval findings reported that fretting corrosion occurred in-vivo, evidenced by the damage patterns that appeared on the THR junction interfaces. There is no scientific data on the studies reporting the fretting corrosion patterns of CoCrMo microstructures in the presence of specific biological treatments to date. In the current study, Flat-on-flat fretting corrosion set-up was customized and used to study the tribocorrosion patterns of fretting corrosion to understand the role of alloy microstructure. Alloy microstructural differences were created with the implant stock metal's longitudinal and transverse cutting orientations. As a result, the transverse created the non-banded, homogenous microstructure, whereas the longitudinal cut resulted in the banded, non-homogenous microstructure on the surface of the alloy (in this manuscript, the terms homogenous and banded were used). The induced currents were monitored using a three-electrode system. Three different types of electrolytes were utilized to study the fretting corrosion patterns with both homogeneous and banded microstructures: 1. Control media 2. Spent media (the macrophage cell cultured media) 3. Challenged media (media collected after the macrophage was treated with CoCrMo particles). From the electrochemical results, in the potentiostat conditions, the banded group exhibited a higher induced current in both challenged and spent electrolyte environments than in control due to the synergistic activity of CoCrMo particles and macrophage demonstrating more corrosion loss. Additionally, both Bode and Nyquist plots reported a clear difference between the banded and homogeneous microstructure, especially with challenged electrolytes becoming more corrosion-resistant post-fretting than pre-fretting results. The banded microstructure showed a unique shape of the fretting loop, which may be due to tribochemical reactions. Therefore, from the electrochemical, mechanical, and surface analysis data results, the transverse/homogenous/non-banded alloy microstructure groups show a higher resistance to fretting-corrosion damage.

Comparative Efficacy of Drug Interventions for Keloids: A Network Meta-analysis.

BACKGROUND: Keloids are common benign skin lesions originating from a disorganized fibroproliferative collagen response; these lesions often lead to both physical and psychological problems. The optimal treatment for keloids is yet to be standardized. Intralesional injection, which is simple and nontraumatic, is one of the most commonly used treatment modalities for these lesions. In this study, we compared 5 different drugs (intralesional injections) for the treatment of keloids in terms of efficacy. METHODS: We systemically searched relevant studies on PubMed, EMBASE, and Cochrane Library. Randomized clinical trials on the safety and efficacy of triamcinolone acetonide (TAC), 5-fluorouracil (5-FU), botulinum toxin A (BTA), verapamil, and bleomycin were included in this study. RESULTS: This network meta-analysis included a total of 1114 patients from 20 randomized controlled trials. Botulinum toxin A alone and TAC plus 5-FU exhibited significantly better efficacy than did 5-FU, TAC, and verapamil. No significant difference in efficacy between BTA alone and TAC combined with 5-FU was observed. No significant differences were noted in the adverse event rate between BTA, TAC plus 5-FU, 5-FU, and TAC. Furthermore, we performed surface under the cumulative ranking curve analyses to predict the rank of each intervention (by efficacy and adverse event rate). The predicted ranking by efficacy was as follows: TAC plus 5-FU, BTA, bleomycin, TAC, 5-FU, and verapamil; the predicted ranking by adverse events was as follows: TAC, 5-FU, TAC plus 5-FU, and BTA. Funnel plot analysis revealed no publication bias. CONCLUSIONS: Botulinum toxin A and TAC plus 5-FU appear to have outstanding therapeutic efficacy for keloids. The rate of adverse events was similar among BTA, TAC, 5-FU, and TAC plus 5-FU. Nonetheless, additional reviews of rigorous, large-scale randomized controlled trials are warranted for further validation of our findings.

Tracheal Replacement Techniques and Associated Mortality: A Systematic Review.

OBJECTIVE: Tracheal replacement is a crucial operation to enhance the quality of life for patients with extensive tracheal lesions. The most suitable surgical techniques for different clinical conditions remain a topic of debate. Through a reviewing of the relevant literature, this study investigated the association between surgical techniques and mortality rate. DATA SOURCES: Studies were collected from PubMed, Embase, the Web of Science, the Cochrane Center Register of Controlled Trials, and ClinicalTrials.gov. METHODS: This systematic review encompassed literature from the inception of each database to May 10, 2023, focusing on tracheal replacement for patients who underwent circumferential resection of the trachea or partial resection with preservation of the posterior membranous wall. Non-human and non-clinical studies were excluded. RESULTS: About 31 studies were included in the assessment comprising a combination of case reports and case series, and 118 patients underwent tracheal replacement through four underlying methodologies, including tracheal allotransplantation, autologous tissue reconstruction, bioprosthetic reconstruction, or tissue engineering surgery. Each modality exhibits unique advantages and disadvantages, leading to variable outcomes in clinical application. CONCLUSION: Tracheal replacement is challenging due to the absence of an ideal substitution or graft material. Despite limited clinical successes observed across various modalities, we believe autologous tissue reconstruction for tracheal replacement has the advantage of broadest indications, low rejection rate, and avoidance of immunosuppressive agents. Future research should focus on achieving tracheal replacement that preserves mucociliary clearance, lateral rigidity, and longitudinal flexibility. LEVEL OF EVIDENCE: NA Laryngoscope, 134:1517-1522, 2024.

Fretting-corrosion Apparatus with Low Magnitude Micro-motion (≤5 µm): Development and Preliminary Outcome.

Fretting-corrosion is one of the failure processes in many applications, including biomedical implants. For example, the modern design of hip implants with multiple components offers better flexibility and inventory storage. However, it will trigger the fretting at the implant interfaces with a small displacement amplitude (< 5 µm) and usually in a partial slip region. Although many studies have been reported on the fretting, they have high displacement amplitude and are in the gross slip region. It is imperative to have an apparatus to overcome such limitations, specifically for hip implant applications. Therefore, this study describes the development of a fretting-corrosion apparatus with low micro-motion (≤ 5 µm) that can simultaneously monitor the corrosion process. Initial experiments with Ti6Al4V-Ti6Al4V in 0.9% saline, Ti6Al4V-Ti6Al4V in bovine calf serum (BCS), and ZrO2-Ti6Al4V in BCS were conducted to validate the system. As a result, the fretting regime of all groups remained partially slip region throughout the 3600 cycles, and the possible failure mechanisms are proposed in this manuscript.

Survivability of Titanium Implant Materials: In Vitro Simulated Inflammatory and Infectious Environment.

Titanium-based implants utilized in total joint arthroplasties could restore primary musculoskeletal function to patients suffering from osteoarthritis and other conditions. Implants are susceptible to failure stemming from aseptic loosening and infection at the joint site, eventually requiring revision surgery. We hypothesized that there might be a feedback loop by which metal degradation particles and ions released from the implant decrease cell viability and increase immune response, thereby creating biochemical conditions that increase the corrosion rate and release more metal ions. This study focused on the synergistic process through cell viability assays and electrochemical tests. From the results, inflammatory conditions from ion release resulting in cell death would further increase the corrosion rate at the metal implant site. The synergistic interaction in the implant surroundings in which infectious conditions produce Ti ions that contribute to more infection, creating a potential cycle of accelerating corrosion.

Assessing the risks of children with preoperative comorbidities undergoing comminuted fracture surgery.

Introduction: Comminuted fractures are characterized by bones broken in at least two places, destabilizing the bone and requiring surgery. Children whose bones are still developing and maturing tend to have a higher risk of sustaining comminuted fractures as the result of trauma. Trauma is a major cause of death in children and constitutes a major issue in orthopedics because of the unique properties of children's bones compared to adult bones and the associated complications. Methods: This retrospective, cross-sectional study aimed to refine the association between comorbid disease and comminuted fractures in pediatric subjects using a large, national database. All data were extracted from the National Inpatient Sample (NIS) database from 2005 to 2018. Logistic regression analysis was used to evaluate associations between comorbidities and comminuted fracture surgery and between various comorbidities and LOS or unfavorable discharge. Results: A total of 2,356,483 patients diagnosed with comminuted fractures were selected initially, of whom 101,032 patients aged younger than 18 years who underwent surgery for comminuted fractures were included. Study results suggest that patients with any comorbidities undergoing orthopedic surgery for comminuted fracture appear to have longer LOS and a higher proportion of discharge to long-term care facilities. Discussion: Almost all comorbidities were significantly associated with poor in-hospital outcomes and longer LOS. The analysis of comminuted fractures in children may provide useful information to help first responders and medical personnel evaluate and manage comminuted fractures appropriately.

Prognostic Factors of Marjolin Ulcers: A Meta-Analysis and Systematic Review Assisted by Machine Learning Techniques.

BACKGROUND: Marjolin ulcers (MUs) are malignant tumors arising from previously injured skin, including burn wounds, scars, chronic ulcers, and other chronic nonhealing inflammatory conditions. They have a potentially long latent period. The authors aimed to establish the prognostic factors for recurrence, metastasis, and disease-specific death related to MU. METHODS: The authors performed a comprehensive search of PubMed, Embase, and the Cochrane Library. After assessing the methodologic quality of case series, they performed a meta-analysis and systematic review. Furthermore, the authors used machine learning to predict patient survival time. RESULTS: MUs on the upper limbs, head, and neck had a higher risk of recurrence. Contrastingly, lower grade lesions, absence of lymph node metastasis, and a tumor diameter of less than 10 cm were associated with lower recurrence risk. The risks were unrelated to age and latent period. In addition, patients without lymph node metastasis had a lower risk of developing distant metastasis. Furthermore, the risk of disease-specific death was lower in patients with a lower tumor grade, absent lymph node metastasis, small tumor diameter (<10 cm), and tumors located in regions other than the head and neck. Correlation analysis showed that the age at initial injury was negatively correlated with the latent period of MU. CONCLUSIONS: The authors found that tumor grade, tumor site, lymph node status, and tumor size are important predictors of a worse prognosis. To integrate these predictors, the authors created an equation to predict the survival time for individual patients by means of machine learning processes. Moreover, the authors found that MU developed more quickly in older individuals with injuries.

The Progress in Tribocorrosion Research (2010-21): Focused on the Orthopedics and Dental Implants.

Tribocorrosion is an integration of two areas-tribology and corrosion. It can be defined as the material degradation caused by the combined effect of corrosion and tribological process at the material interfaces. Significant development has occurred in the field of tribocorrosion over the past years. This development is due to its applications in various fields, such as aerospace, marine, biomedical, and space. Focusing on biomedical applications, tribocorrosion finds its applications in the implants used in cardiovascular, spine, orthopedics, trauma, and dental areas. It was reported that around 7.2 million Americans are living with joint implants. Implant surgery is a traumatic and expensive procedure. Tribocorrosion can affect the lifespan of the implants, thus leading to implant failure and a potential cause of revision surgery. Hence, it is essential to understand how tribocorrosion works, its interaction with the implants, and what procedures can be implemented to protect materials from tribocorrosion. This paper discusses how tribocorrosion research has evolved over the past 11 years (2010-2021). This is a comprehensive overview of tribocorrosion research in biomedical applications.

Hip implant modular junction: The role of CoCrMo alloy microstructure on fretting-corrosion.

Cobalt-chromium-molybdenum (CoCrMo) alloy is one of the most used metals in total hip replacement (THR) due to the alloy's superior corrosion qualities and biocompatibility. Over time these prostheses may undergo wear and corrosion processes in a synergistic process known as tribocorrosion. Implant retrieval studies have shown that damage patterns on THR modular junction surfaces indicating specifically in vivo fretting-corrosion to take place. To date, there have been no studies on the fretting-corrosion behaviors of CoCrMo alloy under the consideration of specific microstructural features. A custom-built flat-on-flat fretting-corrosion setup was utilized to test the synergistic tribocorrosion behavior of fretting-corrosion. The difference in microstructure was generated through the cutting orientations of the transverse and the longitudinal direction of the bar stock material, where the longitudinal cut exhibits a characteristic banded microstructure (banded group) and the transverse cut a homogenous microstructure (unbanded group). A three-electrode system was employed to monitor the induced currents. Two different types of electrolytes were used in the current study: 1. Bovine calf serum (BCS-30 g/L protein) (normal conditions) 2. BCS with Lipopolysaccharide (LPS, 0.15 µg/ml) (simulated infectious conditions). In the free potential mode, banded samples showed an increased potential compared to the unbanded samples. In potentiostatic conditions, the banded group also exhibited a higher induced current in both electrolyte environments, indicating more corrosion loss. Both Nyquist and Bode plots showed both orientations of metal becoming more corrosion resistant post-fretting when compared to pre-fretting data. The longitudinal group at OCP demonstrated a unique shape of the fretting-loop, which might be related to tribochemical reactions. Based on the mechanical, electrochemical, and surface characterization data, the transverse group (unbanded) microstructures demonstrates a higher resistance to fretting-corrosion damage.

Surgical Strategy to Decrease the Revision Rate of Fassier-Duval Nailing in the Lower Limbs of Osteogenesis Imperfecta.

(1) Background: The Fassier−Duval (FD) nail was developed for the treatment of osteogenesis imperfecta (OI). The aim of this study was to review the results of OI patients treated with the FD nail at our institution and discuss a surgical strategy to decrease the FD nail revision rate; (2) Methods: We retrospectively reviewed OI patients treated at our institution between 2015 and 2020. OI patients treated with FD nail insertion in the long bones of the lower extremities were included, and those with a follow-up duration <1 year or incomplete radiographs were excluded. Data on the type of OI, age, sex, use of bisphosphonate treatment, and nail failure were recorded; (3) Results: The final cohort consisted of seven patients (three females and four males) with ten femurs and ten tibiae involved. Six of the patients had type III OI, and one had type IV OI. An exchange of implant was required in 11 limbs. The average interval between previous FD nail insertion and revision surgery was 2.4 years; (4) Discussion: The main reasons for revision surgery were migration of the male/female component, refracture/nail bending, and delayed union. In the femur, migration of the female component or nail bending were common reasons for failure, while migration of the male component and delayed union were common in the tibia; (5) Conclusions: Surgery for OI patients is challenging, and physicians should aim to minimize complications and the need for revision. Sufficient depth of purchase, center−center nail position, and adequate osteotomy to correct bowing are the key factors when using the FD nail.