Thermally activated delayed fluorescence tetradentate ligand-containing gold(III) complexes with preferential molecular orientation and their application in organic light-emitting devices.

A new class of thermally activated delayed fluorescence (TADF) pyridine-/pyrazine-containing tetradentate C^C^N^N gold(III) complexes have been designed and synthesized. Displaying photoluminescence quantum yields (PLQYs) of up to 0.77 in solid-state thin films, these complexes showed at-least a six-fold increase in the radiative decay rate constant (kr) in toluene upon increasing temperature from 210 to 360 K. Using variable-temperature (VT) ultrafast transient absorption (TA) spectroscopy, the reverse intersystem crossing (RISC) processes were directly observed and the activation parameters were determined, in line with the results of the Boltzmann two-level model fittings, in which the energy separation values between the lowest-lying singlet excited state (S1) and the lowest-lying triplet excited state (T1), ΔE(S1-T1), of these complexes were estimated to be in the range of 0.16-0.18 eV. Through strategic modification of the position of the electron-donating -tBu substituent in the cyclometalating ligand, the permanent dipole moments (PDMs) of these tetradentate gold(III) emitters could be manipulated to enhance their horizontal alignment in the emitting layer of organic light-emitting devices (OLEDs). Consequently, the resulting vacuum-deposited OLEDs demonstrated a 30% increase in the theoretical out-coupling efficiency (ηout), as well as promising electroluminescence (EL) performance with maximum external quantum efficiencies (EQEs) of up to 15.7%.

Synthesis, structure and photoluminescence of Cu(I) complexes containing new functionalized 1,2,3-triazole ligands.

The reaction of a triazole ligand, 2-(1H-1,2,3-triazol-4-yl)pyridine (L1), with 2-bromopyridine afforded three new ligands, 2,2'-(1H-1,2,3-triazole-1,4-diyl)dipyridine (L2), 2,2'-(2H-1,2,3-triazole-2,4-diyl)dipyridine (L3) and 2,2'-(1H-1,2,3-triazole-1,5-diyl)dipyridine (L4). A series of luminescent mononuclear copper(I) complexes of these ligands [Cu(Ln)(P^P)](ClO4) [n = 1, P^P = (PPh3)2 (1); n = 1, P^P = POP (2); n = 2, P^P = (PPh3)2 (3); n = 2, P^P = POP (4); n = 3, P^P = (PPh3)2 (5); n = 3, P^P = POP (6); n = 4, P^P = (PPh3)2 (9); n = 4, P^P = POP (10)] have been obtained from the reaction of Ln with [Cu(MeCN)4]ClO4 in the presence of PPh3 and POP. L3 was also found to form dinuclear compounds [Cu2(L3)(PPh3)4](ClO4)2 (7) and [Cu2(L3)(POP)2](ClO4)2 (8). All of the Cu(I) compounds have been characterized by IR, UV/vis, CV, 1H NMR, and 31P{1H} NMR. The molecular structures of 1-3, 5, and 7 have been further determined by X-ray crystallography. In CH2Cl2 solutions, these Cu(I) complexes exhibit tunable green to orange emissions (563-621 nm) upon excitation at λex = 380 nm. In the solid state, these complexes show intense emissions and it is interesting to note that 1 and 3 are blue-light emitters. Density functional theory (DFT) calculations revealed that the lowest energy electronic transition associated with these complexes predominantly originates from metal-to-ligand charge transfer transitions (MLCT).

An Ir(III) cyclometalate-functionalized molecularly imprinted polymer: photophysics, photochemistry and chemosensory applications.

A luminescent trimethylamine (TMA) sensor, PTMA-Ir, has been designed and synthesized through immobilizing a phosphorescent iridium(III) complex on a TMA-imprinted polymer. Detailed study shows that the quenching of phosphorescence of PTMA-Ir can serve as a reporter for the binding of TMA on the imprinting sites, thus providing a sensitive, selective, and rapid detection of TMA in both aqueous solutions and gaseous states. Loading PTMA-Ir on filter paper produced a deposition T-Ir, the phosphorescence of which is quenched within 5 s upon exposure to TMA vapor with detection limits of 9.0 ± 0.1 ppm under argon and 15.0 ± 0.1 ppm in an air atmosphere. This work provided an effective method for establishing an imprinting polymer-immobilized luminescent amine sensor.

Visible Light-Induced Oxidation of Alcohols by a Luminescent Osmium(VI) Nitrido Complex: Evidence for the Generation of PhIO+ as a Highly Active Oxidant in the Presence of PhIO.

Although alcohols are readily oxidized by a variety of oxidants, their oxidation by metal nitrido complexes is yet to be studied. We report herein visible-light-induced oxidation of primary and secondary alcohols to carbonyl compounds by a strongly luminescent osmium(VI) nitrido complex (OsN). The proposed mechanism involves initial rate-limiting hydrogen-atom transfer (HAT) from the α-carbon of the alcohol to OsN*. Attempts to develop catalytic oxidation of alcohols by OsN* using PhIO as the terminal oxidant resulted in the formation of novel osmium(IV) iminato complexes in which the nitrido ligand is bonded to a δ-carbon of the alcohol. Experimental and theoretical studies suggest that OsN* is reductively quenched by PhIO to generate PhIO+, which is a highly active oxidant that readily undergoes α- and δ-C-H activation of alcohols.

Tetradentate C∧C∧N∧N Ligand-Containing Gold(III) Complexes with Orange to Deep-Red Thermally Activated Delayed Fluorescence (TADF) and Their Application in Organic Light-Emitting Devices.

A new class of thermally activated delayed fluorescence (TADF) tetradentate C∧C∧N∧N ligand-containing gold(III) complexes containing acridinyl moieties has been designed and synthesized. These complexes exhibit orange-red to deep-red emission with photoluminescence quantum yields (PLQYs) of up to 0.76 in solid-state thin films. Short excited-state lifetimes of ≤2.0 µs and large radiative decay rate constants (kr) in the order of 105 s-1 have also been found in the complexes. High-performance solution-processed and vacuum-deposited organic light-emitting devices (OLEDs) based on these complexes have been fabricated, demonstrating high maximum external quantum efficiencies (EQEs) of 12.2 and 12.7%, respectively, which are among the best values ever reported for red-emitting gold(III)-based OLEDs. In addition, satisfactory operational half-lifetime (LT50) values of up to 34,058 h have been attained in these red-emitting devices. It is found that the operational stability is strongly dependent on the choice of functional groups on the acridinyl moieties, of which the incorporation of -O- and -S- linkers can effectively prolong the LT50 value by an order of magnitude. The TADF properties of the complexes are substantiated by the hypsochromic shift in emission energies and the remarkable enhancement in the emission intensity upon increasing temperature. The TADF properties have also been supported by temperature-dependent ultrafast transient absorption studies, with the direct observation of reverse intersystem crossing (RISC) and the determination of the activation parameters for the very first time, together with their excited-state dynamics.

Multifunctional Luminescent Sensor Based on the Pb2+ Complex Containing a Tetrazolato Ligand.

A series of luminescent Pb2+ complexes, [Pb(L1)2]n (1), [Pb(L2)2]n (2), [Pb(L3)(NO3)(H2O)2]n (3), [Pb(L3)(Br)(H2O)]n (4), [Pb(L3)(Cl)(H2O)]n (5), and [Pb(L4)(H2O)2] (6) have been synthesized by treatment of polydentate tetrazolato ligands with various hydrated Pb2+ salts (HL1 = 2-(1H-tetrazol-5-yl)pyridine, HL2 = 3-(1H-tetrazol-5-yl)isoquinoline, HL3 = 6-(1H-tetrazol-5-yl)-2,2'-bipyridine, and H2L4 = 6,6'-bis(1H-tetrazol-5-yl)-2,2'-bipyridine). These complexes have been characterized by IR, TGA, and elemental analysis. Their crystal structures have been determined by X-ray crystallography, and the phase purity of bulk samples were further confirmed by PXRD. Their luminescence properties have been investigated in detail, and their emission origin may involve ligand-centered π-π* transition, metal-centered s-p transition and charge-transfer character. It is interesting to note that 5 exhibits obviously enhanced red-shifted emission, whose photoluminescence quantum yield (PLQY = 16.5%) is much higher than the other compounds (≤2%). Most importantly, the emission property of 5 was strongly affected by temperature. When the temperature rises from 295 to 493 K, the emission maximum gradually shifts to high energy due to the loss of the aqua ligand. In contrast, when the temperature is lowered from 295 to 13 K, two emission bands were observed. The low-energy emission band exhibits a slight blue shift, while a new high-energy emission band appears at around 520 nm, which is assigned to ligand-centered phosphorescence. After removal of the coordinated aqua ligand, the emission of 5-H2O is very sensitive to the vapors of volatile primary amines and acids, although they have different response mechanisms. This result indicates that 5-H2O may be a potential multifunctional sensor for temperature, volatile amines, and acids. To decipher the emission origin, DFT calculations have also been carried out based on the structure units of these compounds.

Visible light-induced oxidative N-dealkylation of alkylamines by a luminescent osmium(vi) nitrido complex.

N-Dealkylation of amines by metal oxo intermediates (M[double bond, length as m-dash]O) is related to drug detoxification and DNA repair in biological systems. In this study, we report the first example of N-dealkylation of various alkylamines by a luminescent osmium(vi) nitrido complex induced by visible light.

Luminescent monomeric and dimeric Ru(ii) acyclic carbene complexes as selective sensors for NH3/amine vapor and humidity.

A new class of luminescent bis(bipyridyl) Ru(ii) pyridyl acyclic carbene complexes with environmentally-sensitive dimerization equilibrium have been developed. Owing to the involvement of the orbitals of the diaminocarbene ligand in the emissive excited state, the phosphorescence properties of these complexes are strongly affected by H-bonding interactions with various H-bonding donor/acceptor molecules. With the remarkable differences in the emission properties of the monomer, dimer, and H-bonded amine adducts together with the change of the dimerization equilibrium, these complexes can be used as luminescent gas sensors for humidity, ammonia, and amine vapors. With the responses to amines and humidity and the corresponding change in the luminescence properties, a proof-of-principle for binary optical data storage with a reversible concealment process has been described.

Photoredox Catalysis for the Fabrication of Water-Repellent Surfaces with Application for Oil/Water Separation.

Silanization processes with perfluoroalkyl silanes have been demonstrated to be effective in developing advanced materials with many functional properties, including hydrophobicity, water repellency, and self-cleaning properties. However, practical industrial applications of perfluoroalkyl silanes are limited by their extremely high cost. On the basis of our recent work on photoredox catalysis for amidation with perfluoroalkyl iodides, its application for surface chemical modification on filter paper, as an illustrative example, has been developed and evaluated. Before photocatalytic amidation, the surface is functionalized with amine functional groups by silanization with 3-(trimethoxysilyl)propylamine. All chemically modified surfaces have been fully characterized by attenuated total reflection infrared (ATR-IR), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy with energy-dispersive spectroscopy (SEM-EDS), and three-dimensional (3D) profiling to confirm the successful silanization and photocatalytic amidation. After surface modification of the filter papers with perfluoroalkanamide, they show high water repellency and hydrophobicity with contact angles over 120°. These filter papers possess high wetting selectivity, which can be used to effectively separate the organic and aqueous biphasic mixtures. The perfluoroalkanamide-modified filter papers can be used for separating organic/aqueous biphasic mixtures over many cycles without lowering the separating efficiency, indicating their reusability and excellent durability.

Synthesis, structure and reactivity of iridium complexes containing a bis-cyclometalated tridentate C

In an effort to synthesize cyclometalated iridium complexes containing a tridentate C^N^C ligand, transmetallation of [Hg(HC^N^C)Cl] (1) (H2C^N^C = 2,6-bis(4-tert-butylphenyl)pyridine) with various organoiridium starting materials has been studied. The treatment of 1 with [Ir(cod)Cl]2 (cod = 1,5-cyclooctadiene) in acetonitrile at room temperature afforded a hexanuclear Ir4Hg2 complex, [Cl(κ2C,N-HC^N^C)(cod)IrHgIr(cod)Cl2]2 (2), which features Ir-Hg-Ir and Ir-Cl-Ir bridges. Refluxing 2 with sodium acetate in tetrahydrofuran (thf) resulted in cyclometalation of the bidentate HC^N^C ligand and formation of trinuclear [(C^N^C)(cod)IrHgIr(cod)Cl2] (3). On the other hand, refluxing [Ir(cod)Cl]2 with 1 and sodium acetate in thf yielded [Ir(C^N^C)(cod)(HgCl)] (4). Chlorination of 4 with PhICl2 gave [Ir(C^N^C)(cod)Cl]·HgCl2 (5·HgCl2) that reacted with tricyclohexylphosphine to yield Hg-free [Ir(C^N^C)(cod)Cl] (5). Chloride abstraction of 5 with silver(i) triflate (AgOTf) gave [Ir(C^N^C)(cod)(H2O)](OTf) (6) that can catalyze the cyclopropanation of styrene with ethyl diazoacetate. Reaction of 1 and [Ir(CO)2Cl(py)] (py = pyridine) with sodium acetate in refluxing thf afforded [Ir(C^N^C)(HgCl)(py)(CO)] (7), in which the carbonyl ligand is coplanar with the C^N^C ligand. On the other hand, refluxing 1 with (PPh4)[Ir(CO)2Cl2] and sodium acetate in acetonitrile gave [Ir(C^N^C)(κ2C,N-HC^N^C)(CO)] (8), the carbonyl ligand of which is trans to the pyridyl ring of the bidentate HC^N^C ligand. Upon irradiation with UV light 8 in thf was isomerized to 8', in which the carbonyl is trans to a phenyl group of the bidentate HC^N^C ligand. The isomer pair 8 and 8' exhibited emission at 548 and 514 nm in EtOH/MeOH at 77 K with lifetime of 84.0 and 64.6 µs, respectively. Protonation of 8 with p-toluenesulfonic acid (TsOH) afforded the bis(bidentate) tosylate complex [Ir(κ2C,N-HC^N^C)2(CO)(OTs)] (9) that could be reconverted to 8 upon treatment with sodium acetate. The electrochemistry of the Ir(C^N^C) complexes has been studied using cyclic voltammetry. Reaction of [Ir(PPh3)3Cl] with 1 and sodium acetate in refluxing thf led to isolation of the previously reported compound [Ir(κ2P,C-C6H4PPh2)2(PPh3)Cl] (10). The crystal structures of 2-5, 8, 8', 9 and 10 have been determined.

Visible light photocatalytic cross-coupling and addition reactions of arylalkynes with perfluoroalkyl iodides.

Visible light photocatalytic cross-coupling and addition reactions of arylalkynes with perfluoroalkyl iodides have been developed. Through slight modifications of the reaction conditions, reactions that are selective for the preparation of the C-C coupling product (perfluoroalkyl alkynes) and the addition products (iodo-perfluoroalkyl substituted alkenes) can be achieved. These reactions work well with different types of alkynes and perfluoroalkyl iodides. As the iodide generated from the reaction can serve as a reductant to regenerate the photocatalyst from its oxidized form, no sacrificial electron donor is required.

Precious-metal free photocatalytic production of an NADH analogue using cobalt diimine-dioxime catalysts under both aqueous and organic conditions.

The photocatalytic generation of an NADH synthetic analogue, i.e. 1-benzyl-1,4-dihydronicotinamide (1,4-BNAH), has been studied using the cobalt diimino-dioxime complexes and the BF2-bridged derivative as catalysts. 1,4-BNAH was produced in both aqueous and organic media at unprecedented turnover numbers with metal and organic photosensitizers, respectively.

Time-Resolved Spectroscopic Observation of Diphenylnitrenium Ion Reactions with Guanosine.

Arylnitrenium ions have gained attention for their high reactivity toward guanosine, which in some cases has been linked to carcinogenesis. Although many studies have examined covalent addition reactions between arylnitrenium ions and guanosine, there is still some uncertainty regarding the attack position of nitrenium ions on guanosine and its derivatives. In this paper, we employ nanosecond transient absorption and nanosecond time-resolved resonance Raman spectroscopy to investigate the reaction between the N,N-di(4-bromophenyl) nitrenium ion (2) and guanosine. Our time-resolved spectroscopic results and photochemical product analysis results show that the reaction of guanosine with 2 generates an N7 intermediate that subsequently undergoes rearrangement and deprotonation to produce a C8 adduct. Comparing these results to our previous study between the 2-fluorenylnitrenium ion and guanosine indicates that the structure and properties of arylnitrenium ions are able to influence the reaction pathways and intermediate structures.

Tunable Luminescent Properties of Tricyanoosmium Nitrido Complexes Bearing a Chelating O

We have recently reported a strongly luminescent osmium(VI) nitrido complex [OsVI(N)(NO2-L)(CN)3]- [HNO2-L = 2-(2-hydroxy-5-nitrophenyl)benzoxazole]. The excited state of this complex readily activates the strong C-H bonds of alkanes and arenes (Commun. Chem. 2019, 2, 40). In this work, we attempted to tune the excited-state properties of this complex by introducing various substituents on the bidentate L ligand. The series of nitrido complexes were characterized by IR, UV/vis, 1H NMR, and electrospray ionization mass spectrometry. The molecular structures of five of the nitrido compounds have been determined by X-ray crystallography. The photophysical and electrochemical properties of these complexes have been investigated. The luminescence of these nitrido complexes in the solid state, in a CH2Cl2 solution, and in a CH2Cl2 solid matrix at 77 K glassy medium clearly shows that these emissions are due to 3LML'CT [L ligand to Os≡N] phosphorescence. The presence of strongly electron-withdrawing substituents in these complexes enhances the LML'CT emission. Our result demonstrates that the excited-state properties of this novel class of luminescent osmium(VI) nitrido complexes can be fine-tuned by introducing various substituents on the bidentate L ligand.

Field-induced slow magnetic relaxation in low-spin S = 1/2 mononuclear osmium(v) complexes.

Photochemical reactions of (PPh4)[OsVI(N)(L)(CN)3] (NO2-OsN) with piperidine and pyrrolidine afforded two osmium(v) hydrazido compounds, (PPh4)[OsV(L)(CN)3(NNC5H10)] ([PPh4]1) and (PPh4)[OsV(L)(CN)3(NNC4H8)] ([PPh4]2), respectively. Their structures consist of isolated, mononuclear distorted octahedral osmium anions that are well-separated from each other by PPh4+. Their low spin S = 1/2 and L = 1 ground state was confirmed by magnetometry and DFT calculations. Interestingly, both compounds exhibit slow magnetic relaxation under a bias dc-field. These osmium(v) complexes are potentially useful building-blocks for the construction of molecule-based architectures with interesting magnetic properties. In contrast, the structurally related (PPh4)[OsIII(L)(CN)3(NH3)] ([PPh4]3), which also has a low-spin S = 1/2 ground state but with a different electronic configuration (5d5), does not exhibit slow magnetic relaxation, due to the absence of any orbital moment (L = 0). Furthermore, the structurally different osmium(v) hydrazido compound reported by Meyer, [OsV(tpy)(Cl)2(NNC5H10)](PF6) (4[PF6]), also does not exhibit slow magnetic relaxation due possibly to a change in magnetic anisotropy from axial for [PPh4]1 and [PPh4]2 to planar.

The Important Role of Coordination Geometry on Photophysical Properties of Blue-Green Emitting Ruthenium(II) Diisocyano Complexes Bearing 2-Benzoxazol-2-ylphenolate.

A series of blue-green emitting RuII diisocyano complexes containing 2-benzoxazol-2-ylphenolate (PBO) have been prepared. The complexes were isolated under varied reaction conditions in two isomeric forms, i.e., trans,trans,trans- (1) and cis,trans,cis- (2), with varied ligand coordination geometry above the RuII center. The photoluminescence of the isomeric complexes has been compared and tuned by the systematic variation of the electronic properties of the isocyanides. The cis,trans,cis- isomers exhibit structureless emission in the blue-green region (471-517 nm) upon excitation at λex > 400 nm in dichloromethane solution at room temperature. Both isomeric forms show similarly structured greenish emission at 499-523 nm on excitation at λex > 355 nm in a methanol/ethanol (4:1) glassy medium at 77 K. On careful comparison with the corresponding absorption and electrochemical data, it is suggested that the solution emission of the cis,trans,cis- isomers (2) at room temperature is originated from the metal-to-ligand charge transfer (MLCT), while a ligand-centered (LC) parentage is assigned for the emission in a glassy state for both isomeric forms. In line with the above experimental results, DFT calculation demonstrates the change in the nature and relative energy of the HOMOs and LUMOs with respect to the varied ligand coordination geometry and π-accepting ability of the isocyanides.

Excited State Dynamics of Isocyano Rhenium(I) Phenanthroline Complexes from Time-Resolved Spectroscopy.

The photophysical processes in a series of isocyano Re(I) phenanthroline complexes {[Re(CNR)n (CO)4-n (phen)](PF6 ); n=2, 3, 4, R=2,6-(i Pr)2 C6 H3 - or t Bu- (n=2)} in acetonitrile have been studied by resonance Raman spectroscopy, transient resonance Raman spectroscopy, and femtosecond / nanosecond transient spectroscopy to elucidate the nature of their electronic transitions and emissive excited state(s). The kinetics of the intersystem crossing, vibrational relaxation and radiative decay of the metal-to-ligand charge transfer {MLCT [dπ(Re)→π*(phen)]} excited state have also been determined.

Electronic Communication in Luminescent Dicyanorhenate-Bridged Homotrinuclear Rhenium(I) Complexes.

A series of cyano-bridged homotrinuclear Re(I) complexes with the general formula of {[Re]'[Re][Re]'}+ {[Re]' = -[ReI(CO)2(LL)(X)]; [Re] = -[(NC)ReI(CO)2(phen)(CN)]-; LL = diimine, diphosphine, or two carbonyl ligands; X = triphenylphosphine or carbonyl ligand} and the corresponding mononuclear complex analogues were synthesized. The structures of most of the trinuclear Re(I) complexes have been determined by X-ray crystallography. The relative orientations of peripheral to central Re(I) units in these structures vary considerably. The photophysical properties of these trinuclear Re(I) complexes have been examined. Except for the trinuclear Re(I) complex with Br2phen ligand, all the other triads display orange to red photoluminescence derived from the 3MLCT [dπ(Re) → π*(phen)] origin of the central Re(I) unit, suggestive of efficient energy transfer between the peripheral chromophores and the central unit. In addition to the efficient energy transfer processes between the Re(I) chromophores in these trinuclear complexes, the ability of the [NC-Re-CN] bridging ligands for electronic coupling between the rhenium metal centers is evidenced by ca. 0.2-0.3 V separation of the two rhenium metal-based oxidation potentials of the chemically equivalent peripheral units.

Polynuclear Cu(i) and Ag(i) phosphine complexes containing multi-dentate polytopic ligands: syntheses, crystal structures and photoluminescence properties.

A series of polynuclear metal complexes, [Cu2(L1)(PPh3)4](ClO4)2 (1), [Cu3(L2)(PPh3)6](ClO4) (2), [Cu3(L3)(PPh3)6] (3), [Ag2(L1)(PPh3)4](BF4)2 (4), [Ag4(L2)2(PPh3)6] (5) and [Ag3(L3)(PPh3)5] (6), have been obtained from the reactions of the highly conjugated bridging ligands 2,3-bis(2-pyridyl)pyrazine (L1), 2,3-bis(2-tetrazoyl)pyrazine (H2L2) and 2,3-bis(2-tetrazoyl)imidazole (H3L3) with [Cu(MeCN)4]ClO4 and AgBF4, respectively. Their crystal structures have been determined by X-ray crystallography and their photophysical properties have been investigated in detail. Complexes 1 and 3 show photoluminescence in CH2Cl2 solution, while all the complexes exhibit obvious luminescence in the solid state; detailed photophysical studies and density functional theory calculations of these complexes have revealed that their lowest energy absorptions and emissions are predominantly derived from either metal-to-ligand charge-transfer (MLCT) or intraligand (IL) excited states.

Design of Luminescent Isocyano Rhenium(I) Complexes: Photophysics and Effects of the Ancillary Ligands.

Despite the well-reported MLCT [dπ(M) → π*(CNR)] transitions in the isocyano transition metal complexes, emissive complexes with phosphorescence derived from MLCT [dπ(M) → π*(CNR)] were not extensively studied. To provide insights into the design strategy of phosphorescent rhenium(I) complexes with an emissive 3MLCT [dπ(Re) → π*(CNR)] excited state, a series of pentaisocyano rhenium(I) complexes have been synthesized. In contrast to most of the reported penta- or hexaisocyano rhenium(I) complexes with unsubstituted or alkyl- or monohalo-substituted phenylisocyanide ligands, which only exhibit photoluminescence in 77 K glassy medium, the solutions of all of these complexes were found to show phosphorescence at room temperature. Detailed study on their emission properties revealed that they are derived from the 3MLCT [dπ(Re) → π*(CNR)] excited state mixed with LL'CT character. It has been shown that the strong electron-withdrawing substituents on the isocyanide ligands can lower the energy of the MLCT [dπ(Re) → π*(CNR)] state and raise the deactivating ligand-field state. These effects are the crucial criteria to render the pentaisocyano rhenium(I) complexes emissive. Moreover, the emission properties in terms of energy, lifetime, and quantum yields can also be enhanced by the ancillary ligand.