Enhanced flexibility of high-yield bamboo pulp fibers via cellulase immobilization within guar gum/polyacrylamide/polydopamine interpenetrating network hydrogels.

Softness is a crucial criterion in assessing the comfort and usability of tissue paper. Flexible fibers contribute to the softness of the tissue paper by allowing the sheets to conform to the contours of the skin without feeling rough or abrasive. This study focuses on developing innovative CGG/APAM/PDA hydrogels with interpenetrating networks consisting of cationic guar gum, anionic polyacrylamide, and polydopamine for cellulase immobilization, aimed at improving bamboo fiber flexibility. Cellulase biomolecules are efficiently immobilized on CGG/APAM/PDA hydrogels through the Schiff base reaction. Immobilized cellulases have a wider pH applicability than free cellulases, good storage stability, and can maintain high relative activity at relatively high temperatures. The treatment of bamboo fibers with immobilized cellulase results in a significant increase in flexibility, reaching 6.90 × 1014 N·m2, which is 7.18 times higher than that of untreated fibers. The immobilization of cellulases using CGG/APAM/PDA hydrogels as carriers results in a substantial enhancement of storage stability, pH applicability, and inter-fiber bonding strength, as well as the capacity to sustain high relative enzymatic activity at elevated temperatures. The immobilization of cellulase within CGG/APAM/PDA interpenetrating network hydrogels presents a viable strategy for enhancing bamboo fiber flexibility, thereby expanding the accessibility of tissue products.

Lignin: A multi-faceted role/function in 3D printing inks.

3D printing technology demonstrates significant potential for the rapid fabrication of tailored geometric structures. Nevertheless, the prevalent use of fossil-derived compositions in printable inks within the realm of 3D printing results in considerable environmental pollution and ecological consequences. Lignin, the second most abundant biomass source on earth, possesses attributes such as cost-effectiveness, renewability, biodegradability, and non-toxicity. Enriched with active functional groups including hydroxyl, carbonyl, carboxyl, and methyl, coupled with its rigid aromatic ring structure and inherent anti-oxidative and thermoplastic properties, lignin emerges as a promising candidate for formulating printable inks. This comprehensive review presents the utilization of lignin, either in conjunction with functional materials or through the modification of lignin derivatives, as the primary constituent (≥50 wt%) for formulating printable inks across photo-curing-based (SLA/DLP) and extrusion-based (DIW/FDM) printing technologies. Furthermore, lignin as an additive with multi-faceted roles/functions in 3D printing inks is explored. The effects of lignin on the properties of printing inks and printed objects are evaluated. Finally, this review outlines future perspectives, emphasizing key obstacles and potential opportunities for facilitating the high-value utilization of lignin in the realm of 3D printing.

Polydopamine modified cellulose nanocrystals (CNC) for efficient cellulase immobilization towards advanced bamboo fiber flexibility and tissue softness.

Herein, a green facile approach to improve the flexibility of unbleached bamboo kraft pulp (UBKP) via an immobilized enzyme technology is proposed. Polydopamine (PDA) acts as versatile modification and coating materials of cellulose nanocrystals (CNC) for assembling versatile bio-carriers (PDA@CNC). Cellulase biomacromolecules are efficiently immobilized on PDA@CNC to form cellulase@PDA@CNC nanocomposites. The relative enzyme activity, temperature/pH tolerance, and storage stability of cellulase were significantly improved after immobilization. The degree of polymerization treated UBKP decreased by 5.42 % (25 U/g pulp) compared to the control sample. The flexibility of treated fibers was 6.61 × 1014/(N·m2), which was 96.93 % higher (25 U/g) compared to the control and 3.88 times higher than that of the blank fibers. Cellulase@PDA@CNC performs excellent accessibility to fiber structure and induces high degree of fibrillation and hydrolysis of UBKP fibers, which contributes high softness of obtained tissue handsheets. The bio-carrier PDA@CNC within paper framework may further enhance tissue tensile strength. This study proposes a practical and environmentally friendly immobilization approach of cellulase@PDA@CNC for improving the hydrolysis efficiency and flexibility of UBKP fibers, which provides the possibility to maintain the strength of tissue paper while improving its softness, thus broadening the high-value application of immobilized enzyme technology in tissue production.

A feruloyl esterase/cellulase integrated biological system for high-efficiency and toxic-chemical free isolation of tobacco based cellulose nanofibers.

Tobacco based cellulose nanofiber (TCNF) is a novel nanocellulose that has recently been used to replace undesirable wood pulp fibers in the preparation of reconstructed tobacco sheets (RTS). However, given the strict requirements for controlling toxic chemical content in tobacco products, there is a global interest in developing a green, efficient, and toxic-chemical free approach to isolate TCNF from tobacco stem as a bioresource. In this study, we propose a creative and environmentally friendly method to efficiently and safely isolate TCNF from tobacco stem pulp, which involves integrated biological pretreatment followed by a facile mechanical defibrillation process. Feruloyl esterase is used to pretreat the stem pulp by disrupting the ether and ester bonds between lignin and polysaccharide carbohydrates within the fiber wall, which effectively facilitates cellulase hydrolysis and swelling of the stem pulp fiber, as well as the following mechanical shearing treatment for TCNF isolation. The results demonstrate that TCNF obtained by the comprehensive feruloyl esterase/cellulase/mechanical process exhibit uniform and well-dispersed nanofiber morphology, higher crystallinity, and stronger mechanical properties than those of the control. The addition of 0.5 % TCNF can replace wood pulp by 18 wt% ~ 25 wt% in the production of RTS samples while maintaining their reasonable strength properties.

Nanogrinding/ethanol activation facilitating lignin fractionation for preparation of monodispersed lignin nanoparticles.

Lignin nanoparticles (LNPs), as one of green and sustainable biological macromolecules, have attracted great attention owing to their promising potentials in many valorized fields. However, the lignin heterogeneity seriously restricts the controllable preparation of LNPs. Herein, a facile nanogrinding activation combining anhydrous ethanol dissolution process was developed to efficiently homogenize lignin prior to gradient ethanol fractionation. Two lignin fractions were obtained from nanogrinding activation/ethanol dissolution followed by gradient ethanol fractionation: L-fractions and S-fractions. Therefore, monodispersed LNPs with unique concave hollow nanostructure and large particle size, and monodispersed LNPs with solid core nanostructure and small particle size were successfully prepared from L-fractions and S-fractions, respectively, via a GVL/water anti-solvent method. The proposed LNPs formation mechanisms facilitated by nanogrinding activation/ethanol dissolution treatment were demonstrated. This study put forwards a facile and green integrated approach for monodispersed LNPs preparation with controllable morphology and particle size.

Isolation and utilization of tobacco-based cellulose nanofiber (TCNF) for high performance reconstructed tobacco sheet (RTS).

Nowadays, wood pulp addition (such as softwood, hardwood, etc.) into manufacture reconstructed tobacco sheet (RTS) via a paper-making process is a feasible and sustainable technology. However, the addition of wood pulp in RTS would weaken the tobacco fragrance of cigarette by bring wood gas when smoking. In this study, a practical and feasible pretreatment by hot water/cooking process combined with cationic modification/homogenization treatment was proposed to directly isolate desirable cellulose nanofibers from tobacco stem, named TCNF. The obtained TCNF was applied in the preparation of RTS to improve its physical properties but with a reduced wood pulp proportion (from 25 wt% decreased to 16 wt%). Results showed that TCNF exhibit a similar morphology with wood based nanocellulose, and that the addition of TCNF (0.5 wt% based dried tobacco pulp) can substitute 9 % of wood pulp compared with that of the control at the similar physical properties.