Light-activated conjugated polymer nanoparticles to defeat pathogens associated with bovine mastitis.

Bovine mastitis (BM) represents a significant challenge in the dairy industry. Limitations of conventional treatments have prompted the exploration of alternative approaches, such as photodynamic inactivation (PDI). In this study, we developed a PDI protocol to eliminate BM-associated pathogens using porphyrin-doped conjugated polymer nanoparticles (CPN). The PDI-CPN protocol was evaluated in four mastitis isolates of Staphylococcus and in a hyper-biofilm-forming reference strain. The results in planktonic cultures demonstrated that PDI-CPN exhibited a bactericidal profile upon relatively low light doses (∼9.6 J/cm2). Furthermore, following a seven-hour incubation period, no evidence of cellular reactivation was observed, indicating a highly efficient post-photodynamic inactivation effect. The successful elimination of bacterial suspensions encouraged us to test the PDI-CPN protocol on mature biofilms. Treatment using moderate light dose (∼64.8 J/cm2) reduced biofilm biomass and metabolic activity by up to 74% and 88%, respectively. The impact of PDI-CPN therapy on biofilms was investigated using scanning electron microscopy (SEM), which revealed nearly complete removal of the extracellular matrix and cocci. Moreover, ex vivo studies conducted on bovine udder skin demonstrated the efficacy of the therapy in eliminating bacteria from these scaffolds and its potential as a prophylactic method. Notably, the histological analysis of skin revealed no signs of cellular degeneration, suggesting that the protocol is safe and effective for BM treatment. Overall, this study demonstrates the potential of PDI-CPN in treating and preventing BM pathogens. It also provides insights into the effects of PDI-CPN on bacterial growth, metabolism, and survival over extended periods, aiding the development of effective control strategies and the optimization of future treatments.

Metronomic Photodynamic Therapy with Conjugated Polymer Nanoparticles in Glioblastoma Tumor Microenvironment.

Alternative therapies such as photodynamic therapy (PDT) that combine light, oxygen and photosensitizers (PSs) have been proposed for glioblastoma (GBM) management to overcome conventional treatment issues. An important disadvantage of PDT using a high light irradiance (fluence rate) (cPDT) is the abrupt oxygen consumption that leads to resistance to the treatment. PDT metronomic regimens (mPDT) involving administering light at a low irradiation intensity over a relatively long period of time could be an alternative to circumvent the limitations of conventional PDT protocols. The main objective of the present work was to compare the effectiveness of PDT with an advanced PS based on conjugated polymer nanoparticles (CPN) developed by our group in two irradiation modalities: cPDT and mPDT. The in vitro evaluation was carried out based on cell viability, the impact on the macrophage population of the tumor microenvironment in co-culture conditions and the modulation of HIF-1α as an indirect indicator of oxygen consumption. mPDT regimens with CPNs resulted in more effective cell death, a lower activation of molecular pathways of therapeutic resistance and macrophage polarization towards an antitumoral phenotype. Additionally, mPDT was tested in a GBM heterotopic mouse model, confirming its good performance with promising tumor growth inhibition and apoptotic cell death induction.

Reusable antimicrobial antibiotic-free dressings obtained by photopolymerization.

In recent years significant efforts have been made to develop new materials for wound dressing with improved healing properties. However, the synthesis methods usually employed to this end are often complex or require several steps. We describe here the synthesis and characterization of antimicrobial reusable dermatological wound dressings based on N-isopropylacrylamide co-polymerized with [2-(Methacryloyloxy) ethyl] trimethylammonium chloride hydrogels (NIPAM-co-METAC). The dressings were obtained with a very efficient single-step synthesis procedure based on visible light (455 nm) by photopolymerization. To this end, F8BT nanoparticles of the conjugated polymer (poly(9,9-dioctylfluorene-alt-benzothiadiazole) - F8BT) were used as macro-photoinitiators, and a modified silsesquioxane was employed as crosslinker. Dressings obtained by this simple and gentle method show antimicrobial and wound healing properties, without the incorporation of antibiotics or any other additives. The physical and mechanical properties of these hydrogel-based dressings were evaluated, as well as their microbiological properties, through in vitro experiments. Results show that dressings with a molar ratio of METAC of 0.5 or higher exhibit high swelling capacity, appropriate water vapor transmission rate values, stability and thermal response, high ductility and adhesiveness. In addition, biological tests showed that the dressings have significant antimicrobial capacity. The best inactivation performance was found for hydrogels synthesized with the highest METAC content. The dressings were tested several times with fresh bacterial cultures, showing a bacterial kill efficiency of 99.99 % even after three repetitions in a row, employing the same dressing, demonstrating the intrinsic bactericidal property of the materials and their reusability. In addition, the gels show low hemolytic effect, high dermal biocompatibility and noticeable wound healing effects. Overall results demonstrate that some specific hydrogel formulations have potential application as dermatological dressings for wound healing and disinfection.

Experimental, Spectroscopic, and Computational Insights into the Reactivity of "Methanal" with 2-Naphthylamines.

The reactions of 2-naphthylamine and methyl 6-amino-2-naphthoate with formalin and paraformaldehyde were studied experimentally, spectrally, and by quantum chemical calculations. It was found that neither the corresponding aminals nor imines were formed under the described conditions but could be prepared and spectrally characterized at least in situ under modified conditions. Several of the previously undescribed intermediates and by-products were isolated or at least spectrally characterized. First principle density functional theory (DFT) calculations were performed to shed light on the key aspects of the thermochemistry of decomposition and further condensation of the corresponding aminals and imines. The calculations also revealed that the electrophilicity of methanal was significantly greater than that of ordinary oxo-compounds, except for perfluorinated ones. In summary, methanal was not behaving as the simplest aldehyde but as a very electron-deficient oxo-compound.

Sweet light o' mine: Photothermal and photodynamic inactivation of tenacious pathogens using conjugated polymers.

Each year a rising number of infections can not be successfully treated owing to the increasing pandemic of antibiotic resistant pathogens. The global shortage of innovative antibiotics fuels the emergence and spread of drug resistant microbes. Basic research, development, and applications of alternative therapies are urgently needed. Since the 90´s, light-mediated therapies have promised to be the next frontier combating multidrug-resistance microbes. These platforms have demonstrated to be a reliable, rapid, and efficient alternative to eliminate tenacious pathogens while avoiding the emergence of resistance mechanisms. Among the materials showing antimicrobial activity triggered by light, conjugated polymers (CPs) have risen as the most promising option to tackle this complex situation. These materials present outstanding characteristics such as high absorption coefficients, great photostability, easy processability, low cytotoxicity, among others, turning them into a powerful class of photosensitizer (PS)/photothermal agent (PTA) materials. Herein, we summarize and discuss the advances in the field of CPs with applications in photodynamic inactivation and photothermal therapy towards bacteria elimination. Additionally, a section of current challenges and needs in terms of well-defined benchmark experiments and conditions to evaluate the efficiency of phototherapies is presented.

Selective Photo-Assisted Eradication of Triple-Negative Breast Cancer Cells through Aptamer Decoration of Doped Conjugated Polymer Nanoparticles.

Photodynamic therapy (PDT) may be an excellent alternative in the treatment of breast cancer, mainly for the most aggressive type with limited targeted therapies such as triple-negative breast cancer (TNBC). We recently generated conjugated polymer nanoparticles (CPNs) as efficient photosensitizers for the photo-eradication of different cancer cells. With the aim of improving the selectivity of PDT with CPNs, the nanoparticle surface conjugation with unique 2'-Fluoropyrimidines-RNA-aptamers that act as effective recognition elements for functional surface signatures of TNBC cells was proposed and designed. A coupling reaction with carbodiimide was used to covalently bind NH2-modified aptamers with CPNs synthetized with two polystyrene-based polymer donors of COOH groups for the amide reaction. The selectivity of recognition for TNBC membrane receptors and PDT efficacy were assayed in TNBC cells and compared with non-TNBC cells by flow cytometry and cell viability assays. Furthermore, in vitro PDT efficacy was assayed in different TNBC cells with significant improvement results using CL4, sTN29 and sTN58 aptamers compared to unconjugated CPNs and SCR non-specific aptamer. In a chemoresistance TNBC cell model, sTN58 was the candidate for improving labelling and PDT efficacy with CPNs. We proposed sTN58, sTN29 and CL4 aptamers as valuable tools for selective TNBC targeting, cell internalization and therapeutic improvements for CPNs in PDT protocols.

Iron Oxide Incorporated Conjugated Polymer Nanoparticles for Simultaneous Use in Magnetic Resonance and Fluorescent Imaging of Brain Tumors.

Conjugated polymer nanoparticles (CPNs) have emerged as advanced polymeric nanoplatforms in biomedical applications by virtue of extraordinary properties including high fluorescence brightness, large absorption coefficients of one and two-photons, and excellent photostability and colloidal stability in water and physiological medium. In addition, low cytotoxicity, easy functionalization, and the ability to modify CPN photochemical properties by the incorporation of dopants, convert them into excellent theranostic agents with multifunctionality for imaging and treatment. In this work, CPNs were designed and synthesized by incorporating a metal oxide magnetic core (Fe3O4 and NiFe2O4 nanoparticles, 5 nm) into their matrix during the nanoprecipitation method. This modification allowed the in vivo monitoring of nanoparticles in animal models using magnetic resonance imaging (MRI) and intravital fluorescence, techniques widely used for intracranial tumors evaluation. The modified CPNs were assessed in vivo in glioblastoma (GBM) bearing mice, both heterotopic and orthotopic developed models. Biodistribution studies were performed with MRI acquisitions and fluorescence images up to 24 h after the i.v. nanoparticles administration. The resulting IONP-doped CPNs were biocompatible in GBM tumor cells in vitro with an excellent cell incorporation depending on nanoparticle concentration exposure. IONP-doped CPNs were detected in tumor and excretory organs of the heterotopic GBM model after i.v. and i.t. injection. However, in the orthotopic GBM model, the size of the nanoparticles is probably hindering a higher effect on intratumorally T2-weighted images (T2WI) signals and T2 values. The photodynamic therapy (PDT)-cytotoxicity of CPNs was not either affected by the IONPs incorporation into the nanoparticles.

Photodynamic therapy of Glioblastoma cells using doped conjugated polymer nanoparticles: An in vitro comparative study based on redox status.

Due to their superb light absorption and photostability conjugated polymer nanoparticles are promising photosensitizers (PS) for their use in Photodynamic therapy (PDT). Recently, we developed metallated porphyrin-doped conjugated polymer nanoparticles (CPNs) for PDT that efficiently eliminate tumor cells through reactive oxygen species (ROS) mediated photoinduced damage of apoptotic nature. These nanoaggregates act as densely packed multi-chromophoric systems having exceptional light harvesting and (intra-particle) energy transfer capabilities which lead to efficient photosensitized formation of ROS. In general, three key components; light, PS, and oxygen; are considered in the prediction of the PDT outcome. However, recent studies led to the discovery of a profound genetic heterogeneity among glioblastoma (GBM) cells which include the adaptation to ROS. Thus, tumor heterogeneity and their associated difference in sensitivity to ROS-producing therapeutic agents must be considered in the design of PDT protocols for the prediction of its outcome. In this study, anticancer activity through ROS-mediated PDT using CPNs was compared in three GBM cell lines with different initial redox status. T98G cells were the most effective incorporating nanoparticles but also were the most resistant to CPN-PDT effect. In part, this feature could be attributed to the differential basal and PDT-induced antioxidant enzyme levels found in these cells measured by gene expression analysis. Furthermore, considering that cell-specific antioxidant enzyme status is a significant feature of GBM heterogeneity, establishing its correlation with CPN-PDT outcome might be important for designing novel and improved CPN-based treatments.

Trojan horse monocyte-mediated delivery of conjugated polymer nanoparticles for improved photodynamic therapy of glioblastoma.

Aim: To assess monocyte-based delivery of conjugated polymer nanoparticles (CPNs) for improved photodynamic therapy (PDT) in glioblastoma (GBM). Materials & methods: Human monocyte cells (THP-1) and murine monocytes isolated from bone marrow (mBMDMs) were employed as stealth CPN carriers to penetrate into GBM spheroids and an orthotopic model of the tumor. The success of PDT, using this cell-mediated targeting strategy, was determined by its effect on the spheroids. Results: CPNs did not affect monocyte viability in the absence of light and did not show nonspecific release after cell loading. Activated monocytes incorporated CPNs in a higher proportion than monocytes in their naive state, without a loss of cellular functionality. In vitro PDT efficacy using cell-mediated delivery was superior to that using non vehiculized CPNs. Conclusion: CPN-loaded monocytes could efficiently deliver CPNs into GBM spheroids and the orthotopic model. Improved PDT in spheroids was confirmed using this delivery strategy.

Photodynamic Inactivation of ESKAPE Group Bacterial Pathogens in Planktonic and Biofilm Cultures Using Metallated Porphyrin-Doped Conjugated Polymer Nanoparticles.

Photodynamic inactivation (PDI) protocols using photoactive metallated porphyrin-doped conjugated polymer nanoparticles (CPNs) and blue light were developed to eliminate multidrug-resistant pathogens. CPNs-PDI protocols using varying particle concentrations and irradiation doses were tested against nine pathogenic bacterial strains including antibiotic-resistant bacteria of the ESKAPE (Enterococcus faecium, Staphylococcus aureus, Klebsiella pneumoniae, Acinetobacter baumannii, Pseudomonas aeruginosa, and Enterobacter species) pathogens group. The bactericidal effect was achieved in methicillin-resistant Staphylococus aureus (S. aureus) strains using low light doses (9.6-14.4 J/cm2), while Gram-negative bacteria required a higher light dose (28.8 J/cm2). The bacteria-CPN interaction was studied through flow cytometry, taking advantage of the intrinsic CPN fluorescence, demonstrating that CPNs efficiently bind to the bacterial envelope. Finally, the performance of CPNs-PDI was explored in biofilms; good antibiofilm ability and almost complete eradication were observed for S. aureus and Escherichia coli biofilms, respectively, using confocal microscopy. Overall, we demonstrated that CPNs-PDI is an efficient tool not only to kill superbugs as sessile cells but also to disrupt and eradicate biofilms of highly relevant pathogenic bacterial species.

Conjugated Polymer Nanoparticles as Unique Coinitiator-Free, Water-Soluble, Visible-Light Photoinitiators of Vinyl Polymerization.

The use of conjugated polymer nanoparticles (CP NPs) of poly(9,9-dioctylfluorene-alt-benzothiadiazole) and poly(9,9-di-n-octylfluorenyl-2,7-diyl) as efficient photoinitiator systems (PIS) of vinyl polymerization in water is reported herein. CP NPs are biocompatible, excitable with blue commercial LEDs and, unlike visible light Type II PIS, do not need co-initiators to trigger a monomer chain reaction. CP NPs photoinitiate polymerization of a variety of acrylic monomers with initiation rates comparable to those observed for well-known Type II PIS. Given the extraordinarily large molar absorption coefficients of CP NPs (≈108 m-1 cm-1 ) very low particle concentration is required for effective polymerization. Additionally, CP NPs behave as conventional macrophotoinitiators significantly reducing contamination risks due to leaching of low molecular weight byproducts. These combined features make CP NPs PIS suitable to synthesize polymeric materials for many healthcare and biomedical applications including drug delivery, tissue engineering, prosthetic implants, and food/medicine packaging. These CP NPs PIS are also used to synthesize nano-hydrogels with a relatively narrow and controlled size distribution in the absence of surfactants. It is proposed that polymerization is initiated at the CP NPs surface by photogenerated free polarons, in close analogy to the mechanism previously described for PIS based on inorganic semiconductor NPs.

Controlled release of antibiotics from photopolymerized hydrogels: Kinetics and microbiological studies.

The development of convenient synthetic methods and improved materials for the production of high load-capacity and biocompatible drug delivery systems is a challenging task with important implications in health sciences. In this work, acrylamide/2-hydroxyethylmethacrylate and N-isopropylacrylamide/2-hydroxyethylmethacrylate hydrogels were synthesized by photopolymerization using energy-efficient green-LEDs. A functionalized silsesquioxane was used as both crosslinker and co-initiator for the photopolymerization. The hybrid organic-inorganic nature of the silsesquioxane improved the resulting hydrogels' properties increasing their swelling capacity and biocompatibility. Additionally, the mild conditions used during the photopolymerization allowed the synthesis of hydrogels in the presence of antibiotics yielding high load-capacity materials in which the drug preserves its molecular structure and antimicrobial activity (as confirmed by HPLC and microbiological assays). The materials were characterized by FTIR, DSC and SEM. Additionally, the kinetics of gels´ swelling and drug release were studied under physiological conditions (pH 7.4 and 37 °C). The results demonstrate how hydrogel composition affects the antibiotics-release kinetics. The final drug release percentage increased with increasing molar fraction of acrylamide or N-isopropylacrylamide and in most cases exceeded 85%. Finally, the antibacterial effect of loaded gels was characterized using a number of assays against Gram negative and Gram positive bacteria. The observed antibacterial effect correlated well with swelling and drug release results. Furthermore, gels are not toxic for isolated erythrocytes as demonstrated by haemolytic tests. Overall, our results indicate that the produced hydrogels are promising materials to develop controlled drug-delivery devices such as capsules, dermatological patches and others.

Synthesis of new cyano-substituted analogues of Tröger's bases from bromo-derivatives. A stereochemical dependence of long-range (n JHH , n = 4, 5, and 6) proton-proton and proton-carbon (n JCH , n = 1, 2, 3, 4, and 5) coupling constants of these compounds.

A free-catalyst microwave-assisted cyanation of brominated Tröger's base derivatives (2a-f) is reported. The procedure is simple, efficient, and clean affording the nitrile compounds (3a-e, I) in very good yields. Complete assignment of 1 H and 13 C chemical shifts of 2a-f, I and 3a-d, I was achieved using gradient selected 1D nuclear magnetic resonance (NMR) techniques (1D zTOCSY, PSYCHE, DPFGSE NOE, and DEPT), homonuclear 2D NMR techniques (gCOSY and zTOCSY), and heteronuclear 2D NMR techniques (gHSQCAD/or pure-shift gHSQCAD, gHMBCAD, bsHSQCNOESY, and gHSQCAD-TOCSY) with adiabatic pulses. Determination of the long-range proton-proton coupling constants n JHH (n = 4, 5, 6) was accomplished by simultaneous irradiation of two protons at appropriate power levels. In turn, determined coupling constants were tested by an iterative simulation program by calculating the 1 H NMR spectrum and comparing it to the experimental spectrum. The excitation-sculptured indirect-detection experiment (EXSIDE) and 1 H-15 N CIGARAD-HMBC (constant time inverse-detection gradient accordion rescaled heteronuclear multiple bond correlation) were applied for determination of long-range carbon-proton coupling constants n JCH (n = 2, 3, and 4) and for assignment of 15 N chemical shift at natural abundance, respectively. DFT/B3LYP optimization studies were performed in order to determine the geometry of 2c using 6-31G(d,p), 6-311G(d,p), and 6-311 + G(d,p) basis sets. For calculation of 1 H and 13 C chemical shifts, n JHH (n = 2, 3, 4, 5, and 6), and n JCH (n = 1, 2, 3, and 4) coupling constants, the GIAO method was employed at the B3LYP/6-31G(d,p), B3LYP/6-31+G(d,p), B3LYP/6-311+G(d,p), B3LYP/6-311++G(2d,2p), B3LYP/cc-pVTZ), and B3LYP/aug-cc-pVTZ) levels of theory. For the first time, a stereochemical dependence magnitude of the long-range n JHH (n = 4, 5, and 6) and n JCH (n = 1, 2, 3, 4, and 5) have been found in bromo-substituted analogues of Tröger's bases.

On the Simultaneous Identification and Quantification of Microalgae Populations Based on Fluorometric Techniques.

In this study, the phytoplankton structure of a freshwater reservoir located in central Argentina (Embalse Río Tercero) was analyzed using Beutler's method (Photosynthesis Research 72: 39-53, 2002), aiming to provide water quality control agencies with a reliable tool for early detection of algae blooms, particularly cyanobacteria. The method estimated the concentration of chlorophyll a (Chl a) contributed by individual algal groups in a real sample by fitting its fluorescence excitation spectrum to a linear combination of norm spectra of relevant algae groups. To this purpose, norm spectra for five algae genera usually found in Embalse Río Tercero, Microcystis, Chlorella, Cyclotella, Ceratium and Porphyridium, were constructed and posteriorly used to analyze samples collected in the reservoir in years 2014-2016. Results showed that the method worked well for the quick identification of the algae present in the samples, but it tended to overestimate its Chl a contents. This error was attributed to the large heterogeneity of the algal populations due to the aging of cells grown in environmental conditions.

Metallated porphyrin-doped conjugated polymer nanoparticles for efficient photodynamic therapy of brain and colorectal tumor cells.

AIM: Assess biocompatibility, uptake and photodynamic therapy (PDT) mechanism of metallated porphyrin doped conjugated polymer nanoparticles (CPNs) in human brain and colorectal tumor cells and macrophages. MATERIALS & METHODS: CPNs were developed employing 9,9-dioctylfluorene-alt-benzothiadiazole, an amphiphilic polymer (PS-PEG-COOH),  and platinum octaethylporphyrin. T98G, SW480 and RAW 264.7 cell lines were exposed to CPNs to assess uptake and intracellular localization. Additionally, a PDT protocol using CPNs was employed for the in vitro killing of cancer and macrophage cell lines. RESULTS & CONCLUSION: CPNs were well incorporated into glioblastoma and macrophage cells with localization in lysosomes. SW480 cells were less efficient incorporating CPNs with localization in the plasma membrane. In all cell lines PDT treatment was efficient inducing oxidative stress that triggered apoptosis.

Crosslinked polymer nanoparticles containing single conjugated polymer chains.

Conjugated polymer nanoparticles are widely used in fluorescent labeling and sensing, as they have mean radii between 5 and 100 nm, narrow size dispersion, high brightness, and are photochemically stable, allowing single particle detection with high spatial and temporal resolution. Highly crosslinked polymers formed by linking individual chains through covalent bonds yield high-strength rigid materials capable of withstanding dissolution by organic solvents. Hence, the combination of crosslinked polymers and conjugated polymers in a nanoparticulated material presents the possibility of interesting applications that require the combined properties of constituent polymers and nanosized dimension. In the present work, F8BT@pEGDMA nanoparticles composed of poly(ethylene glycol dimethacrylate) (pEGDMA; a crosslinked polymer) and containing the commercial conjugated polymer poly(9,9-dioctylfluorene-alt-benzothiadiazole) (F8BT) were synthesized and characterized. Microemulsion polymerization was applied to produce F8BT@pEDGMA particles with nanosized dimensions in a ∼25% yield. Photophysical and size distribution properties of F8BT@pEDGMA nanoparticles were evaluated by various methods, in particular single particle fluorescence microscopy techniques. The results demonstrate that the crosslinking/polymerization process imparts structural rigidity to the F8BT@pEDGMA particles by providing resistance against dissolution/disintegration in organic solvents. The synthesized fluorescent crosslinked nanoparticles contain (for the most part) single F8BT chains and can be detected at the single particle level, using fluorescence microscopy, which bodes well for their potential application as molecularly imprinted polymer fluorescent nanosensors with high spatial and temporal resolution.

Charge-Transfer Dynamics of Fluorescent Dye-Sensitized Electrodes under Applied Biases.

The development of dye-sensitized solar cells requires an in-depth understanding of the interfacial charge-transfer dynamics that take place between dye sensitizers and semiconductors. Here, we describe a prototype system to probe these dynamics by monitoring in real time the fluorescence of two organic sensitizers, a perylene and a squaraine, bound to a SnO2 semiconductor thin film as a function of potentiostatic control of the Fermi level. The two different sensitizer fluorophores characterized by vastly different redox potentials undergo similar fluorescence modulation with applied bias, an indication that the density of states of the semiconductor largely influences the charge-transfer dynamics while energetics play a minimal role. We further show that the rate of photodegradation of the perylene sensitizer with applied bias provides a suitable marker to study the rate of charge injection and charge recombination. Taken together, our results demonstrate a suitable platform to visualize and study charge-transfer dynamics on films and constitute a step toward achieving single-molecule resolution in our quest to decipher the static and dynamic heterogeneity of charge-transfer dynamics in dye-sensitized photoanodes.

Energy and electron transfer processes in polymeric nanoparticles.

We report herein a study on photoinduced electron transfer (eT) and energy transfer (ET) processes occurring between 9-methylanthracene-acrylate (A) and N,N-dimethylaniline-acrylate (D) derivatives incorporated into polymeric nanoparticles (NP). Five types of NPs were synthesized: PAD0, PAD25, PAD75, PD25, and PD75. All NPs are composed of a crosslinked polymer matrix of methyl methacrylate and ethylene glycol dimethacrylate. In addition, PAD0, PAD25 and PAD75 contain low doping levels of A. For PAD25 and PAD75, 25% and 75% of the mole fraction of methyl methacrylate is replaced by D, respectively. PD25 and PD75 were prepared as above but without A. NPs (diameter 6-9 nm) dispersed in organic solvents were characterized based on their UV-visible absorption, emission, excitation, and excitation anisotropy spectra and time dependent absorption and emission spectroscopy techniques. The emission decay profiles of A and D were always complex. Results indicate that A senses two distinct environments in all NPs. The emission quenching of PAD0 by DMA in DCM solutions is dynamic, and it is apparent that a significant fraction of A is inaccessible to the quencher. The emission of A is efficiently quenched by the presence of D in PAD25 and PAD75. The intra-NP photoinduced eT quenching mechanism has static and dynamic components. Selective excitation of D in PAD25 and PAD75 leads to the formation of the excited state of A via a singlet-singlet ET Föster type mechanism. Results indicate that both intra-NP eT and ET processes are more efficient in PAD75 due to the reduced average D*-A separation in these NPs.

Fluorescent polymer coatings with tuneable sensitive range for remote temperature sensing.

Polymer films of poly(vinyl alcohol) containing the fluorescent dyes 4-aminophthalimide (AP) or 6-propionyl-2-dimethylamino-naphthalene (Prodan) are used as temperature-sensitive fluorescent coatings for remote temperature sensing. Temperature can be obtained by a two-wavelength ratiometric-based emission intensity measurement. The coatings are sensitive in a 100K temperature range that can be tuned by polymer-solute interactions. The usable range is 200-300 K for AP and 280-380 K for Prodan.

Modulation of the photophysical properties of pyrene by the microstructures of five poly(alkyl methacrylate)s over a broad temperature range.

Pyrene fluorescence spectra have been recorded in five poly(alkyl methacrylate)s (where alkyl is ethyl butyl, isobutyl, cyclohexyl and hexadecyl) over a 20-400 K temperature range. The changes in the position and the full width at half maximum (FWHM) of the 0-0 emission band (peak I) have been correlated with the structural characteristics of the alkyl groups in the different relaxation regimes of the polymers to assess the degree of coupling of the excited singlet states with the polymer cybotactic regions. Data treatment of the peak I positions using an electron-phonon model indicates that longitudinal optical modes are involved, and that the magnitude of coupling depends on the polymer structure and follows the same trend as the glass transition temperatures. The same spectral parameters have been correlated also with "hole" free volumes from positron annihilation spectroscopy over temperature ranges which span the glass or melting transitions of the polymers. Reasons why free volume and FWHM measurements follow the same trends, and other aspects of the systems, are discussed.