The Ideal Chinese Lip: Impact of Lip Contours and Proportions.

BACKGROUND: The lips are one crucial determinant of facial attractiveness. Current studies investigating lip attractiveness were mostly conducted in Caucasians, and the results could not directly apply to Asians. Aside from lip proportions, lip contours play an important role in attractiveness but it is unclear how people perceive different lip contours. The aim of this study was to investigate the aesthetic perception of various lip shapes by Chinese to identify the most attractive lip morphology for women and men, respectively. METHODS: 303 Chinese participants were invited to rate the attractiveness of identical lip images with different contours and proportions in a young female and a young male. Stratified analyses were performed to assess the effect of gender, age and occupation on the preference of lip shapes. RESULTS: The lips that were rated to be most attractive had a flat upper vermilion border, an M-shaped oral fissure and a U-shaped lower vermilion border in both genders. Most respondents considered an upper-to-lower vermilion proportion of 1:1 to be more attractive, regardless of the gender of the lip models, and the lip thickness-to-width proportions of 1:2 and 1:2.5 were perceived most attractive for female and male, respectively. CONCLUSIONS: This study adds to our understanding of how lip contours contribute to attractiveness and that Chinese have distinctive aesthetic preferences for lip morphology, which possibly stem from racial characteristics and cultural differences. With such knowledge, practitioners may better tailor the treatment strategy when performing lip rejuvenation procedures. LEVEL OF EVIDENCE III: This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Gender- and Age-Related Characterization of Lower Eyelid Morphology: Three-Dimensional Analysis in a Chinese Population.

BACKGROUND: The lower eyelid region is a critical component of the face. It is essential to establish anthropometric reference values for the evaluation of aging, surgical planning and assessment of outcomes in periocular esthetic and rejuvenation procedures. This study aims to provide comprehensive anthropometric data on the Chinese lower eyelid region, into account factors such as sex and age, through three-dimensional imaging analysis. METHOD: Three-dimensional facial images were obtained from 84 healthy Chinese individuals aged between 20-35 and 50-65 years, as well as eight patients aged between 20 and 35 who presented with eyelid bags. A total of 27 landmarks were identified, leading to the generation of corresponding 21 lines, 5 curves, 4 angles, 2 areas and 5 ratios. The measurements were compared among different age groups, genders and young patients with or without eyelid bags. RESULTS: Compared to females, males exhibited a more elongated palpebral fissure, lower tear trough and lid-cheek junction, smaller inner and outer canthus angles, as well as a larger area and proportion of the lower palpebral region. As age progressed, the height and width of the palpebral fissure and inner canthus angle decreased gradually, which was accompanied by sagging of the tear trough and lid-cheek junction, an increase in lower eyelid area and swelling of the lower eyelid. Young patients undergoing eyelid bags demonstrated larger and more swelling lower eyelid which held clinical significance for rejuvenation surgery. CONCLUSION: Males exhibited a higher proportion of the brow-eye unit occupied by the lower eyelid region compared to females. Elderly individuals displayed noticeable drooping of the tear trough and lid-cheek junction, accompanied by swelling in the lower palpebral region. These findings can serve as standard references for esthetic procedures and reconstructive periocular operations. LEVEL OF EVIDENCE IV: This journal requires that authors assign a level of evidence to each article. For a full description of these evidence-based medicine ratings, please refer to Table of Contents or online Instructions to Authors www.springer.com/00266.

Vulvar migration of injected polyacrylamide hydrogel following breast augmentation: a case report and literature review.

BACKGROUND: Vulvar migration is a rare complication of filler injection for breast augmentation, generally presenting as repeated pain and fever. We will report a case of woman with polyacrylamide hydrogel breast injection develops vulvar abscess. CASE PRESENTATION: A woman with a history of polyacrylamide hydrogel breast injection was noted to have vulvar abscess due to migration of filler materials. Filler removal surgery and vacuum sealing drainage was performed for this patient. The patient was discharged from the hospital with no further complications. After a review of pertinent literature, only four previous case reports are found. Local inflammatory response, infection, large volume injections, inframammary fold destruction, hematogenous or lymphatic migrate, trauma, gravity and external pressure could play essential parts in the migration of injected filler. CONCLUSION: Polyacrylamide hydrogel migration poses a worldwide challenge, necessitating personalized solutions. Our case study underscores the importance of comprehensive examinations for individuals with a history of filler breast injection when suspecting vulvar filler migration.

Defining Ideal Pretarsal Rolls Through a Morphometric Analysis in Asians.

BACKGROUND: Pretarsal rolls are a crucial aesthetic feature. Despite numerous studies conducted on periorbital aesthetics, there remains a dearth of research on the ideal pretarsal rolls. OBJECTIVES: This study aimed to investigate 4 aesthetic characteristics of ideal pretarsal rolls: presence, width, proportion, and morphology. METHODS: Respondents (385, including 80 aesthetic specialists) were presented with 7 series of images of pretarsal rolls, including 2 series of pretarsal roll existence, 2 series of varying widths, 2 series of different ratios between pretarsal roll and palpebral fissure height, and 1 series about morphology. Participants were asked to rank each image within a given series from most attractive to least attractive. The rankings were then analyzed according to population demographics. RESULTS: The majority of respondents deemed images with pretarsal rolls to be more aesthetically pleasing (P < .001) than those without such features. Additionally, pretarsal rolls with a width of 5 mm (P < .001), a ratio to palpebral fissure height of 0.5:1 (P < .001), and a crescent shape (P < .001) were perceived as the most attractive. Moreover, individuals aged 40 or younger exhibited a significant preference for images with pretarsal rolls compared to older groups (P < .001), and females displayed a greater inclination toward a medium ratio of pretarsal roll to palpebral fissure height than males did (0.5:1 P = .003, 0.618:1 P < .001). CONCLUSIONS: This study validates the optimal characteristics of pretarsal rolls, which provides insight into pretarsal roll aesthetics and holds significant implications for surgical planning and effect assessment in future periocular procedures involving pretarsal rolls.

Defining Ideal Double Eyelids With a Morphometric Analysis in Asians.

BACKGROUND: Double eyelids are always considered crucial aesthetic symbols. Despite numerous studies conducted on the attractiveness of double eyelids, there remains a dearth of research on quantitative and morphological evaluation of ideal double eyelids. OBJECTIVES: In this we study aimed to investigate the optimal height and morphological characteristics of ideal double eyelids. METHODS: Participants were presented with a total of 9 images, consisting of 1 single eyelid image and 8 double eyelid images, featuring 2 distinct shapes and 4 varied pretarsal shows. Respondents were instructed to assign scores ranging from 1 (least attractive) to 5 (most attractive) for each image. Subsequently, the scores for each image were analyzed based on population demographics, followed by the calculation of aesthetic metrics. RESULTS: The whole cohort deemed images with a 2-mm fold to be more attractive than 1 mm (P < .001), followed by 3 mm and 0 mm (single eyelid), and finally, 4 mm. Morphologically, significant differences were found between images with the same pretarsal shows of 3 mm (P < .001) and 4 mm (P = .026). Most subgroup analysis results were aligned with those of the cohort, with gender being the most significant factor in distinguishing double eyelid aesthetics. Additionally, aesthetic characteristics of 2-mm folds were found to be comparable to appealing double eyelids in previous studies. CONCLUSIONS: In this study we validated the optimal heights and morphology of double eyelids, thereby addressing the existing gap in aesthetic studies on double eyelids. These findings hold significant implications for surgical planning, effect assessment, and other periocular procedures related to upper blepharoplasty.

Nerve Distribution Method is Superior to the Conventional Method in BoNT-A Treatment of Trapezius Hypertrophy: A Randomized Controlled Trial.

The contour of the neck and shoulder is defined by the trapezius muscle (TM). Beyond facial procedures, botulinum toxin A (BoNT-A) injections has been increasingly adopted to create a smooth shoulder line. Several studies described the intramuscular nerve branching and the pattern of perforating branch of the accessory nerve in the trapezius muscle, providing essential information for botulinum neurotoxin injection. To this date, research groups seldom perform clinical investigations, especially randomized controlled trials, that demonstrates whether BoNT-A injections using the nerve distribution method for aesthetic purposes is more effective. Patients met the criteria for inclusion were randomized to either the Nerve Distribution group (ND group) or control group. Control group patients received injection using the conventional method while ND group patients received the nerve distribution method. Photographic and ultrasonographic evaluations were carried out at baseline, one month, three months, and six months after the procedure. Patients were also required to complete a questionnaire to evaluate their feedbacks to the injection. After screening, 30 healthy young Chinese women were included. At one-month follow-up, no statistically significant difference was observed between the two methods. At the three-month follow-up, the reduction of the TM thickness for the ND group (0.21 ± 0.09 cm) was more than that for the control group (0.27 ± 0.08 cm), with p = 0.047*. Similar differences were observed for the reduction of the shoulder area proportion (p = 0.031*) and the shoulder angle (p = 0.035*). At the six-month follow-up, the reduction in TM thickness in the ND group (0.2 ± 0.09 cm) was more than that of the control group (0.28 ± 0.06 cm), with p = 0.041*. The global aesthetic improvement scale feedbacks of the two methods showed no significant difference (3.4 ± 0.71 vs 3.8 ± 0.91, p = 0.207). The patients did not experience severe side effects. Compared to the conventional injection method, the nerve distribution method is more effective in reducing the trapezius muscle thickness, shoulder area proportion, and shoulder angle at three months, and shows longer lasting effects. The results of this study introduce unique insights into the design and tailoring of treatment protocols for shoulder-line contouring using BoNT-A.Level of Evidence I This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Protocol Establishment and Reliability Verification of Three-Dimensional Digital Stereophotogrammetry in Lower Eyelid Anthropometry.

BACKGROUND: Three-dimensional (3D) stereophotogrammetry has been widely used in anthropometry for both medical and esthetic purposes. However, no studies have assessed its reliability on measuring the lower eyelid by 3D imaging. This study aimed to establish a standardized 3D anthropometric protocol for lower eyelid region and validate its reliability. METHODS: Fifty-eight participants (116 eyes) were recruited with mean age of 39.14 ± 11.25 years. Two sets of VECTRA 3D images were taken for each subject, and each set of images was individually measured twice by two raters. Twenty-seven landmarks were identified in the lower eyelid region, and then 19 linear, 4 curvilinear, 7 angular and 2 areal metrics were assessed for intrarater, interrater and intramethod reliability. RESULTS: High reliability was found in this 3D imaging-based lower eyelid anthropometry. The mean absolute difference within 2 intrarater measurement were 0.22 and 0.08 units, the technical errors measurement were 0.31 and 0.15 units, the relative errors of measurement were 0.90% and 0.31%, the relative technical errors of measurement were 1.53% and 0.64%, and the intra-group correlation coefficient was 0.99 and 0.99. The results for interrater measurement were 0.53 units, 0.59 units, 2.94%, 3.41% and 0.96, and for intramethod measurement were 0.71 units, 0.77 units, 4.12%, 4.05% and 0.95 units, respectively. CONCLUSION: 3D stereophotogrammetry is reliable for lower eyelid anthropometry. The standardized protocol can be further applied for many purposes such as lower eyelid aging evaluation, surgical related assessment and periocular rejuvenation plan. LEVEL OF EVIDENCE IV: This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Development and Validation of a Comprehensive Perioral Evaluation Method Using Three-Dimensional Stereophotogrammetry.

BACKGROUND: The non-invasive three-dimensional (3D) stereophotogrammetry is widely used in anthropometry for medical purpose. Yet, few studies have assessed its reliability on measuring the perioral region. OBJECTIVES: This study aimed to provide a standardized 3D anthropometric protocol for the perioral region. METHODS: 38 female and 12 male Asians were recruited (mean age 31.6 ± 9.6 years). Two sets of 3D images using the VECTRA 3D imaging system were acquired for each subject, and two measurement sessions for each image were performed independently by two raters. 25 landmarks were identified, and 28 linear, 2 curvilinear, 9 angular and 4 areal measurements were evaluated for intrarater, interrater, and intramethod reliability. RESULTS: Our results showed high reliability of 3D imaging-based perioral anthropometry by mean absolute difference (0.57 and 0.57 unit), technical error measurement (0.51 and 0.55 unit), relative error of measurement (2.18% and 2.44%), relative technical error of measurement (2.02% and 2.34%), and intraclass correlation coefficient (0.98 and 0.98) for intrarater 1 and intrarater 2 reliability; respectively 0.78 unit, 0.74 unit, 3.26%, 3.06% and 0.97 for interrater reliability; and respectively 1.01 unit, 0.97 unit, 4.74%, 4.57% and 0.95 for intramethod reliability. CONCLUSIONS: This standardized protocol utilizing 3D surface imaging technologies are feasible and highly reliable in perioral assessment. It could be further applied for diagnostic purpose, surgical planning and therapeutic effect evaluation in clinical practice in relation to perioral morphologies. LEVEL OF EVIDENCE IV: This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Individualized High Double Eyelid Fold Correction in Secondary Blepharoplasty: A Free-Style Design.

BACKGROUND: High crease correction is difficult to achieve in secondary blepharoplasty. Currently, patients tend to have more precise requirements for crease-lowering procedures, such as low in-fold or low out-fold creases. For the out-fold crease, the height of the central crease is similar with the height of the medial crease, whereas for the in-fold crease, the height of the medial crease is lower than the height of the central crease. OBJECTIVES: In this study, the authors developed a strategy to create low in-fold or out-fold creases to satisfy patients' individualized requirements. METHODS: The medical records of patients who received crease-lowering secondary blepharoplasty from January 2015 to January 2021 were reviewed. The results were grouped by preoperative condition (high in-fold/out-fold) and patients' expectations for postoperative outcome (low in-fold/out-fold). Preoperative and postoperative images were collected, and patient satisfaction, complications and revisions were evaluated. RESULTS: In total, 297 consecutive patients were included in this study with an average follow-up duration of 12.3 months. Eighteen patients had high in-fold creases, and 279 patients had high out-fold creases. Regarding patients with high out-folds, 233 patients wanted to have low out-folds, and 46 patients wanted to have low in-folds. Two hundred and sixty-six (89.6%) patients were satisfied with their results. Complications included complete crease loss (n = 3, 1.0%), partial crease loss (n = 5, 1.7%), multiple creases (n = 6, 2.0%), asymmetric creases (n = 7, 2.4%), and upper eyelid skin laxity (n = 10, 3.4%). CONCLUSIONS: This flexible, novel technique for customizing low out-fold or in-fold creases is reliable in high double-eyelid crease correction based on preoperative upper eyelid skin tightness, scar positions, and the patient's expected double-eyelid crease shape. LEVEL OF EVIDENCE IV: This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Ultrasonographic Analysis of Trapezius Muscle for Efficient Botulinum Toxin Type A Injection.

BACKGROUND: Patients nowadays seek medical reduction of the upper trapezius muscle to achieve aesthetic pleasing necklines. Botulinum toxin type A (BoNT-A), a neurotoxin that reduces the force of muscle contraction, is widely used for shoulder contouring. However, detailed metrical data are lacking to guide clinical injection. METHODS: Forty healthy young women were enrolled. All subjects were seated for point marking and measuring of trapezius muscle (TM) anatomical data. At marked locations, the thickness of the subcutaneous tissue, the thickness of the TM, the TM's anterior border, and the depth from the skin surface to the middle of TM were measured using a real-time ultrasound scanner. In addition, photos were taken to assess the shoulder area proportion and shoulder angle. RESULTS: The shoulder area size among participants was 90 ± 15.2 cm2, the average area proportion was 0.55 ± 0.1, and the shoulder angle was 23.12° ± 2.9°. Ultrasonography data reveal that the thickness of the subcutaneous tissue, the thickness of the TM, and the depth from the skin surface to the middle of TM all thickened from the anterior line to the posterior line (P < 0.001). The length of the TM extending forward was 1.47 ± 0.4 cm (range 0.51-1.31 cm). To better evaluate the appearance of the trapezius muscle, we constructed a grading system correlated to shoulder angle. CONCLUSION: In this study, ultrasonography and photos were applied to assess the TM's anatomical features. Trapezius hypertrophy was described on a scale from 0 to 2 based on the shoulder angle. The findings of the present study provide a practical clinical guidance for precise and efficient BoNT-A administration. LEVEL OF EVIDENCE IV: This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

A Comprehensive Ultrasound Evaluation Approach of Lower Facial Structure Before Masseter Muscle Botulinum Toxin Injection.

BACKGROUND: Masseter reduction by botulinum neurotoxin A (BoNT-A) injection is a popular procedure in East Asia. Inappropriate injection can result in various complications. OBJECTIVES: The aim of this study was to develop an approach for comprehensively evaluating the lower facial structure based on the shape of the mandible angle, the thickness of the masseter, and the thickness of subcutaneous fat. METHODS: Clinical profiles and standard ultrasound images were collected from patients seeking masseter BoNT-A injections. Lower facial structures were evaluated based on 3 aspects: mandible, masseter, and subcutaneous fat and skin. The mandibular angle was classified as extroverted, straight, or introverted. The starting point of the middle part of the masseter was recorded. The thickness of the deep inferior tendon, the superficial and deep belly of the superficial part of the masseter, and their contractility were measured. Overall thickness and the thickness of subcutaneous fat and skin were also measured. RESULTS: Eighty-four masseters from 42 patients were included. Straight mandibular angles were the most common type of angle (48.81%), followed by introverted (26.19%) and extroverted angles (25.00%). The middle part of the masseter starts from 2.33 [0.36] cm (mean [standard deviation]) above the mandible edge, which is above the usual injection points. The superficial belly was thicker than the deep belly in both static and clenching states (P = .048, P = .001) and had greater contractility. The average overall thickness was 1.87 [0.29] cm. CONCLUSIONS: Comprehensive evaluation of the lower facial contour and structure based on ultrasound examination could be a reliable and replicable assessment approach.

Avatrombopag is effective in patients with chemoradiotherapy-induced aplastic anemia: a single-center, retrospective study.

Aplastic anemia (AA) secondary to radiotherapy presents a difficult situation in the treatment of both the malignant tumor and AA itself. We aimed to evaluate the efficacy of avatrombopag (AVA), a thrombopoietin receptor agonist, in patients with AA secondary to chemoradiotherapy. In this retrospective study, patients with malignant tumors who were diagnosed with AA after radiotherapy and chemotherapy and accepted AVA between September 2020 and October 2021 at Peking Union Medical College Hospital were selected. A total of 34 patients were enrolled, including 13 (38.2%) men, with a median age of 60 (20-71) years. At a median of 8 (6-18) months of follow-up, the overall response rates (ORRs) at 1, 3, and 6 months were 32.4%, 55.9%, and 58.8%, respectively, and the complete response rates (CRRs) were 5.9%, 14.7%, and 23.5%, respectively. The median time to respond was 3 (1-6) months. In total, 15.0% of patients relapsed during follow-up, but no clonal evolution was noticed. Mild side effects were observed in 17.6% of patients without drug withdrawal. At the end of follow-up, 17.6% of patients had tumors relapsed. Four patients died, three from tumor relapse and one from cerebral hemorrhage. The ORR and CRR did not correlate with eltrombopag before AVA (p > 0.05) but increased when the total exposure of AVA increased (p = 0.011), and the threshold for AVA response was a cumulative dose > 3,000 mg (p = 0.013). AVA yielded good response and tolerance in patients treated for AA secondary to chemoradiotherapy, and a higher dose may correlate with better response.